Jadwal Training 2024

Hydraulic / Pneumatic & Electric Control System (BANDUNG)

 

Jadwal Training

Hydraulic / Pneumatic & Electric Control System (BANDUNG)

TRAINING TIME :  

  • 14 Nov 2023-17 Nov 2023
  • 19 Dec 2023-22 Dec 2023

VENUE :  Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :  4 hari

CAKUPAN MATERI TRAINING:

  1. Introduction To Fluid Power & Electric Control System
    • What Is Fluid Power
    • History Of Fluid Power
    • Aplication Of Fluid Power
    • Type Of Fluid Power
    • The Fluid Power Industry
  2. Properties Of Fluid Power System
    • Fluids: Liquids An Gases
    • Weight, Density, And Specific Gravity
    • Pressure, Head, And Force
    • Pascal’s Law
    • Bulk Modulus,Viscosity
    • Neutralization Number
  3. Energy And Power In Fluid Power System
    • Review Of Mechanic
    • Application Of Pascal’s Law
    • Conservation Of Energy
    • The Continuity Equation
    • Hydraulic Horsepower
    • Bernoulli’s Equation
    • Torricelli’s Theorem
  4. Hydraulic Technic
    • The Meaning & Objective
      • Hydraulic Power Transmission
      • Intensifiers Hydraulic Pressure
    • Hydraulic  System In Engineering Industrial
    • The Main Part Of Hydraulic System
      • Power Generator
      • Hydraulic Pump
      • Pressure Relief Valve
      • Reservoir & Fluid Conditioner
      • Fluid Control
      • Overlaps Position
      • Meter-In Control And Meter-Out Control
      • Working Element On Hydraulic System
    • Planning A Hydraulic Series
      • Time-Motion Diagram
      • Circuit Diagram
  5. Pneumatic Technic
    • The Meaning & Objective
    • The Main Parts Of Pneumatic System
      • Power Pack
      • Service Unit
      • Directional Control Valve
      • Working Element
      • Sensor Tools
      • Pneumatic Series
      • Simple Pneumatic Series Circuit Diagram
    • The Aplication Of Pneumatic Control System In Working Plane Mechanical
      • Step Displacement Diagram
      • Element Drawing Om Circuait Diagram
      • Pneumatic Control Series With Distribution Line
  6. Simple  Electricity For Electric Motor, Electro,Hydraulic/Pneumatic
    • Installation Tools For Electrical Engine
      • Phase On Ac Current
      • Circuit Diagram
    • Controlling An Ac/Dc Current Motor
      • Controlling An Ac 1-Phasa Current Motor
      • Controlling An Ac 3-Phasa Current Motor
      • Changing Rotation (Reverse)
      • Contractor Relay
      • End Guard Brake Micro Switches And Transformer
    • Electrical Series Of Electro Hydraulic/Pneumatic
      • And Gate
      • Or Gate
      • Not Gate
      • Nand Gate
      • Nor Gate
      • Xnor Gate

INSTRUCTOR :  Ir. Syahbardia, MT.  dan Tim

INVESTATION PRICE/PERSON :    

  • Rp. 8.500.000/person (full fare) or
  • Rp. 8.250.000/person (early bird, payment 1 week before training) or
  • Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  • Modul Training
  • Flashdisk Training berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Ir. SYAHBARDIA, MT.  alumni dari teknik mesin Institut teknologi Bandung, ITB (sarjana), dan teknik material ITB untuk program magister. Beliau pernah menjadi dosen di Politeknik ITB/POLBAN dan sekarang Beliau menjadi dosen di jurusan teknik di universitas Pasundan, Bandung. Beliau memiliki pengalaman lapangan praktis sebagai mechanical engineer ketika beliau bekerja, seperti di IPTN, PINDAD, dan PAL. Ir. Syahbardia,MT. sudah sering menjadi instruktur di training-training industri untuk perusahaan-perusahaan di Indonesia. Diantara judul-judul yang Beliau sampaikan adalah Predictive and Preventive Pump Maintenance, Compressor Characteristic Maintenance & Troubleshooting, Rotary Equipment Maintenance, Lubrication, Operation, Maintenance and Trouble Shooting, Materials Selection and Knowledge for Engineers, Centrifugal Compresor & Steam Turbine Performance, Welding Inspection, Turbine & Generator Operation, Boiler Water Treatment, Pump Operation and Maintenance, Electrical Motor Control System, Corrosion and Cathodic Protection, Fluid Flow Measurement, Generator Preventive Maintenance, Heavy Equipment Management, Preventive and Predictive Maintenance, dan lain-lain.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Turbomachinery : Operation, Maintenance And Troubleshooting (BANDUNG)

 

Jadwal Training Info Seminar

Turbomachinery :  Operation, Maintenance And Troubleshooting (BANDUNG)

TUJUAN TRAINING :

Diharapkan setelah pelatihan turbomachinery, peserta :

  • Mampu mengidentifikasi bagian bagian utama dari turbo machinery
  • Memahami prinsip kerja turbomachinery
  • Mengetahui prosedur operasi yang efektif
  • Mengetahui instrumentasi dan kontrol pada turbomachinery
  • Memahami peralatan pendukung turbomachinery
  • Mampu menganalisis problem seperti kavitasi, surging, vibrasi
  • Mampu mengatasi problem yang terjadi
  • Mengetahui prosedur perawatan

CAKUPAN MATERI TRAINING :

  • Turbin gas
    Prinsip kerja turbin gas
    Komponen komponen utama (kompresor, ruang bakar, turbin gas, rotor, sudu rotor)
    Prosedur operasi pada turbin gas
    Prestasi atau unjuk kerja pada turbin gas
    Peralatan pendukung pada turbin gas (sistem starting, sistem pelumasan, sistem bahan bakar, sistem udara pemasukan )
    Chooking fenomena, surging, dan vibrasi pada turbin gas
    Instrumentasi dan kontrol
    Trouble shooting pada turbin gas
    Perawatan pada turbin gas
  • Turbin Uap
    Prinsip kerja turbin uap
    Komponen komponen pada turbin uap
    Prosedur operasi
    Prestasi turbin uap
    Sistem pelumasan pada turbin uap
    Instrumentasi, kontrol dan peralatan proteksi pada turbin uap
    Trouble shooting
  • Pompa dan Kompresor
    Prinsip kerja pompa dan kompresor
    Komponen komponen pompa dan kompresor
    Prosedur operasi pompa dan kompresor
    Prestasi pompa dan kompresor
    Chooking fenomena, surging, kavitasi dan vibrasi pada pompa dan kompresor
    Instrumentasi dan kontrol
    Trouble shooting
    Perawatan pada pompa dan kompresor

INSTRUCTOR :   Ir. Maridjo,MT. and team

VENUE :Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION :4 days

TRAINING TIME :
18-21 Desember 2023

INVESTMENT PRICE/PERSON :
Rp. 8.500.000/person (full fare) or
Rp. 8.250.000/person (early bird, payment 1 week before training) or
Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisimateri training
  3. Sertifikat
  4. ATK: NoteBookdan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training denganfasilitas Full AC dan multimedia
  9. Makansiangdan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasiuntukpesertadari hotel penginapanke hotel tempat training – PP (jikapeserta minimal darisatuperusahaanada 4 peserta)

TRAINING INSTRUCTOR
Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balonganpertamina, PT. Indocement, some PLTA, some hotels, PT.PupukKujang, PT.BioFarma, BPPT, PT. BintangAgung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing
Jadwal Training

SCADA SYSTEMS (BANDUNG)

Jadwal Training

SCADA SYSTEMS (BANDUNG) Tanggal 19 Dec 2023-22 Dec 2023 Tempat Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino ... Baca Selengkapnya

SCADA SYSTEMS (BANDUNG)

 

Jadwal Training

SCADA SYSTEMS (BANDUNG)

Tanggal
19 Dec 2023-22 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINNG DESCRIPTION :
Discusses the concept, design and implementation of SCADA Systems. Also covers toolkits for many application, such as: I/O interfacing, interntworking, Graphical User Interface (GUI), Database development, mathematical tool, remote access, internet services, etc.

TRAINING OBJECTIVE :
You will be able to :

  1. Understand the concept of SCADA Systems
  2. Understand the architecture of  SCADA Systems
  3. Use and maintain SCADA Systems
  4. Know communications in SCADA Systems
  5. Set-up database server and its access
  6. Understand the use of Viewer in plant data integration
  7. Integrate SCADA and internet/intranet

TRAINING MATERIAL OUTLINE :

  1. Introduction to Operating Systems
  2. Basic concepts of SCADA Systems
  3. I/O Driver and Data Communication
  4. Communication Protocol
  5. Socket Programming
  6. Remote Terminal Unit (RTU)
  7. Client/Server Programming Concepts
  8. SCADA Server Unit
  9. HMI and GUI Development
  10. Wireless Communication
  11. Database server set-up
  12. Data viewer and Alarm Reporting Generation
  13. SCADA-internet/intranet Integration

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE :

  1. SCADA Systems integrated to Windows networking
  2. Access to running mini plant simulator

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training)  or
  3. Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.  He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung.

He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012).

He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004).

He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electrical Power System Analysis And Protection

 

Jadwal Training

Electrical Power System Analysis And Protection

TRAINING TIME :  
12-15 Desember 2023

VENUE :   Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

TRAINING DURATION :  4 hari

INTRODUCTION :
The purpose of this course is to develop a thorough understanding of power system analysis and design as well as the overall capabilities of Power Station. Class room discussion, and problem-solving has been designed to provide the analytical techniques necessary to solve a wide variety of practical problem. In this 4-day course the participant will :

  1. Learn and get better understanding of electric power system operation and condition
  2. Learn and better understanding the types of electric power configuration
  3. Be able to calculate basic calculation of electric power system
  4. Be able to analyze disturbance
  5. Learn and better understanding of monitoring system and control
  6. Learn and better understanding effect of load in power system

 CAKUPAN MATERI TRAINING:

  1. Electric power grid representation and characteristic.
  2. Type of electric power system configuration and characteristic.
  3. Load shedding system and load analysis.
  4. Basic calculation in normal condition.
  5. Basic calculation in disturbance condition and disturbance analysis.
  6. Electrical power system monitoring equipment and selection.
  7. Electrical Protection Practice and Basic Technology (Protective Gear. Reliability, Selectivity ,Speed, Stability and Sensitivity ,Circuit quantities & conventions , Fault calculations)
  8. Fundamental protection concepts :  time-inverse , differential , directional impedance, etc
  9. Static Relays
  10. Circuits using analogue techniques , Digital techniques , Output and Tripping circuits ,   Electrical Interference , Future trends
  11. Relay input sources:      VTs, CTs, CVTs,  CCVTs,  optical voltage and   current transducers.
  12. Bus Protection
  13. Capacitor bank protection.
  14. Line protection : directional comparison,  blocking,   unblocking,  transfer trip, etc
    System stability, reclosing, and load shedding
  15. Protection Schemes and substation design diagrams
  16. Generator protection
  17. Motor protection
  18. Transformer protection
  19. Differential protection
  20. Industrial Power System Protection
  21. Installation, testing and maintenance of protection systems

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?:
Beberapa kategori para profesional yang dapat mengikuti kursus :

  • Supervisor / Superintendent, Teknisi dan Power Plant Maintenance, Operator dan Electric didalam bidang  kelistrikan utamanya yang berkaitan dengan operasi, maintenance dan inspeksi peralatan industri yang berkaitan dengan sistem proteksi listrik.
  • Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.
  • Seluruh pihak yang ingin memahami topik ini

INSTRUCTOR :  Tugino, ST.,MT. dan Tim

INVESTATION PRICE/PERSON :    

  • Rp. 8.500.000/person (full fare) or
  • Rp. 8.250.000/person (early bird, payment 1 week before training) or
  • Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon, PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing
Jadwal Training Info Seminar

Hydraulic Control System

Jadwal Training

Hydraulic Control System Tanggal 04-07 Desember 2023 Tempat Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi ... Baca Selengkapnya

Hydraulic Control System

 

Jadwal Training Info Seminar

Hydraulic Control System

Tanggal
04-07 Desember 2023

Tempat
Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION :   4 days

LATAR BELAKANG:
Pelaksanaan pekerjaan mekanis mempunyai peranan penting dalam bidang otomatisasi industri, seperti: pencekaman, penggesaran, pengaturan posisi dan arah benda kerja. Kebutuhan sensor dan prosesor berkembangan sejalan dengan kebutuhan penggerak yang membantu operasi kerja yang dikontrol dengan menggunakan sensor untuk mengukur keadaan dan kondisi mesin. Sistem kontrol hidrolik sebagai solusi alternatif untuk media kendali yang memanfaatkan cairan bertekanan untuk elemen hidrolik. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Otomatisasi Industri dengan Kontrol Hidrolik.

PESERTA:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang sistem kontrol atau otomatisasi hidrolik pada industri rekayasa.

OUTPUT TRAINING:
Pemahaman tentang pengetahuan karakteristik dan aplikasi hidrolik dan keahlian tentang perancangan sistem kontrol hidrolik.

CAKUPAN MATERI TRAINING:

  • Konsep dasar hidrolik.
  • Komponen dan simbol hidrolik dan fungsinya.
  • Sistem kontrol hidrolik dasar.
  • Sistem kontrol hidrolik lanjut.
  • Prinsip sistem listrik dengan hidrolik.
  • Perancangan kontrol elektro hidrolik.

INVESTATION PRICE/PERSON :   

  • Rp. 8.500.000/person (full fare) or
  • Rp. 8.250.000/person (early bird, payment 1 week before training) or
  • Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.:

Pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.

In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Tungsten ARC Welding (LAS TIG) BANDUNG

 

Jadwal Training

Gas Tungsten ARC Welding (LAS TIG) BANDUNG

Kata TIG dari kalimat Las TIG adalah singkatan dari Tungsten Inert Gas, disebut juga GTAW (Gas Tungsten Arc Welding) atau pengelasan bususr Wolfram pelindung gas, yaitu proses pengelasan busur listrik elektroda tidak terumpan, dengan menggunakan gas mulia sebagai pelindung terhadap pengaruh udara luar atau lebih sering dikenal sebagai pengelasan listrik.

Gas yang digunakan sebagai pelindung adalah gas Helium (He), gas Argon (Ar), gas Karbondioksida (CO2) atau campuran dari gas – gas tersebut. Proses pengerjaan Las TIG pada umumnya menghasilkan lasan yang lebih baik daripada proses pengelasan yang lain. Kelebihannya adalah bisa digunakan untuk mengelas alumunium dan yang paling efektif adalah untuk mengelas logam dengan ketebalan 1/8 inci.

TUJUAN :
Peserta diharapkan dapat mengetahui dan memahami :

  • Kesehatan dan keselamatan kerja pada pengelasan
  • Prinsip dasar dan aplikasi GTAW
  • Pemilihan, persiapan dan pembentukan tungsten
  • Keistimewaan dan kerugian GTAW
  • Desain sambungan dan posisi pengelasan
  • Material, pemilihan elektroda dan pemeriksaan hasil lasan

PESERTA :
Praktisi tingkat operator, tingkat penyelia atau perencana bidang pengelasan pada industri rekayasa.

CAKUPAN MATERI TRAINING:

TEORI :

a. Kesehatan dan keselamatan kerja pada pengelasan
b. Proses las GTAW
c. Peralatan yang harus disiapkan:

  1. Mesin las
  2. Elektroda
  3. Tungsten
  4. Pembentukan tungsten

d. Gas pelindung

  • Argon, Helium dan Karbondioksida (CO2)

e. Keistimewaan proses

  • Keuntungan
  • Kerugian

f. Posisi pengelasan sesuai standard (ISO dan ASME/AWS)
g. Jenis sambungan
h. Prosedur pengelasan
i. Pemeriksaan dan pengujian hasil lasan

PRAKTEK :
a. Fillet weld (sambungan T: 1F, 2F, 3F, 4F)
b. Plate weld (sambungan pelat: 1G, 2G, 3G, 4G)
c. Tube weld (sambungan pipa: 1G, 2G, 5G, 6G)

Sertifikat Kompetensi, sesuai dengan level (posisi pengelasan) yang mampu dicapai

INSTRUCTOR: Ir. Sutrimo, M.Eng and team

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION: 4 days for non certification / 5 days for certification program

TRAINING TIME : (tanggal dibawah ini adalah tanggal untuk training NON SERTIFIKASI, untuk Program Sertifikasi ditambah 1 hari lagi )

  • 13 Nov 2023-16 Nov 2023
  • 11 Dec 2023-14 Dec 2023

INVESTMENT PRICE/PERSON :

A. NON-CERTIFICATION:

  • Rp. 8.950.000/person (full fare) or
  • Rp. 8.750.000/person (early bird, payment 1 week before training) or
  • Rp. 8.500.000/person (if there are 3 persons or more from the same company)

B. CERTIFICATION (BNSP ATAU IWS) :
Rp. 10.500.000/person

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NotesBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffee break every day of training
  10. Qualified instructor
  11. Transportation for participants from the hotel of participants to/from the hotel of training (if the minimum number of participants from one company is 4 persons)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Perlakuan Panas Logam (Heat Treatment For Metal)

 

Jadwal Training

Perlakuan Panas Logam (Heat Treatment For Metal)

Tanggal
06 Nov 2023-09 Nov 2023
04 Dec 2023-07 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

PENDAHULUAN :
Sifat mekanik logam (ferrous) dan paduannya sangat dipengaruhi oleh proses pembuatan (raws material), struktur mikro, dan proses perlakuan lanjutannya.  Sifat mekanik dapat mengalami perubahan bila bahan tersebut diproses dengan perlakuan panas (heat treatment). Secara garis besar heat treatment memiliki tujuan untuk memperbaiki keuletan, menghilangkan tegangan sisa, mengubah ukuran butir, dan meningkatkan kekerasan atau kekuatan tarik. Pengaruh heat treatment ini sangat luas terutama terhadap mampu mesin, mampu bentuk, konduktivitas listrik, sifat magnetik dan ketangguhannya. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Proses Perlakuan Panas (Heat Treatment).
 
PESERTA TRAINING :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang teknologi material pada industri rekayasa.

TUJUAN TRAINING :  
Setelah mengikuti pelatihan ini peserta diharapkan memiliki pemahaman lebih tentang pengetahuan dan keahlian melakukan proses perlakuan panas (heat treatment).

CAKUPAN MATERI TRAINING :

  1. Konsep dasar proses perlakuan panas
    Definisi, tujuan, syarat-syarat, diagram fasa besi-carbon, transformasi fasa,
  2. Klasifikasi proses perlakuan panas
    Hardening, Annealing, Normalizing, Tempering
  3. Pengerasan permukaan
    Carburizing, Flame hardening, Nitriding.
  4. Diagram CCT.
  5. Analisis sifat mekanik.
  6. Pengujian sampling mampu keras bahan

INVESTATION PRICE/PERSON :   

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.:

Pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.

In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Managing The Integrity Of Gas Pipeline System (BANDUNG)

 

Jadwal Training Info Seminar

Managing The Integrity Of Gas Pipeline System (BANDUNG)

Tanggal

1-3 November 2023 (Yogya)
15-17 November 2023
27-29 Desember 2023

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

INVESTATION PRICE/PERSON :

  • Rp 6.500.000/person (full fare)  or
  • Rp 6.250.000/person (early bird, payment 1 week before training) or
  • Rp 5.950.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Tas
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INTRODUCTION :
Pipeline system mean all parts of physical facilities through which gas trasnported, include pipe, valve, appurtenances attached to pipe, compressor, unit, metering station, regulator station, deliverability and holder. Managing the integrity of gas pipeline system is the primary goal of every system operator to continue providing safe and reliable delivery of natureal gas to their customer without adverse effect on employees, the public, customer or the enviroment. Incident – free operation to become goal of pipeline insdustry. ASME B31.8 code will allow pipeline operators to move close to that goal.

TRAINING MATERIAL OUTLINE :
1. Pipeline integrity Management, ASME B31.8 S

  • 5 Element for managing pipeline integrity
  • Performance plan
  • Communication plan
  • Management of Change
  • Quality Control plan
  • Integrity management plan

2. Threat to the pipeline

  • Third party damage
  • Corrosion
  • Design and operation

3. Pipeline line risk management

  • Risk Assessment
  • Risk Assessment as Part of an Integrity Management Plan
  • Risk Mitigation Measures
  • Risk Acceptance Criteria and Communication
  • Pipeline Security Risk

4. Other related Risk based management

  • Reliability centered maintenance
  • Safety integrity system (Safety instrumented Function)
  • Risk based inspection

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Advance PID Controller (BANDUNG)

 

Jadwal Training Info Seminar

Advance PID Controller (BANDUNG)

Tanggal

  • 06 Nov 2023-09 Nov 2023
  • 13 Nov 2023-16 Nov 2023
  • 11 Dec 2023-14 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DESCRIPTION:
Covers the principle of  advance industrial process control. Also provides the usually found  advanced PID configuration in industrial systems. Methods for advanced PID controller configuration and tuning are also discussed.

TRAINING OBJECTIVE:
You will be able to :

  1. Understand the concept of advanced process control
  2. Understand the concept of advanced PID controller
  3. Identify the requirement for open loop and closed loop stability
  4. Understand the concept of advanced PID controller
  5. Use advanced PID controller tuning
  6. Know the implementation of advanced PID controller and advanced tuning

TRAINING MATERIAL OUTLINE:

  1. Review to Process Control
  2. Advanced Types of PID Controller
  3. Performance of Control Systems
  4. Cascade control
  5. Ratio control
  6. Split-range control
  7. Signal select control
  8. Feedforward control
  9. Anti-windup control
  10. Advanced PID Tuning
  11. PID Auto-tuning
  12. Optimal PID tuning

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:

  1. Computer Facilities with Personal Computer Intel Pentium III and 4
  2. Practical work using PLC
  3. (Yokogawa, OMRON or Schneider)
  4. Simulation using Expertune or MATLAB Software
  5. Process Simulator

PREREQUISITE:  Have Knowledge on Process Control

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training)  or
  3. Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.  He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung.

He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012).

He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004).

He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing
Informasi Seminar

Thermal Spray Coating (BANDUNG)

Jadwal Training

Thermal Spray Coating (BANDUNG) Tanggal 23-26 Oktober 2023 27-30 November 2023 11-14 Desember 2023 Tempat Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, ... Baca Selengkapnya

Thermal Spray Coating (BANDUNG)

 

Informasi Seminar

Thermal Spray Coating (BANDUNG)

Tanggal

  • 23-26 Oktober 2023
  • 27-30 November 2023
  • 11-14 Desember 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION AND GOAL:
Thermal spraying is a group of processes wherein a feedstock material is heated and propelled as individual particles or droplets onto a surface. The thermal spray gun generates the necessary heat by using combustible gases or an electric arc. As the materials are heated, they are changed to a plastic or molten state and are confined and accelerated by a compressed gas stream to the substrate. The particles strike the substrate, flatten, and form thin platelets (splats) that conform and adhere to the irregularities of the prepared substrate and to each other. As the sprayed particles impinge upon the surface, they cool and build up, splat by splat, into a laminar structure forming the thermal spray coating.

Thermal spray coating is a well-established coating technique comparing with other coating processes. The advantages of thermal spray coating comparing with hard chrome, physical vapour deposition (PVD), chemical vapour deposition (CVD) are:

  1. high deposition rate
  2. low heat input process
  3. proven technology
  4. variety of coating materials
  5. high degree of repeatability
  6. resource of utilization
  7. favorable economics

Thermal spray technology and coatings solve critical problems in demanding environments. They provide “solutions” to problems involving repair, wear, high temperature and aqueous corrosion, and thermal protection. Thermal spray can also be used to manufacture net-shapes, advanced sensors and materials for the biomedical and energy/environmental sectors. These and other emerging applications take advantage of the rapid and cost-effective capabilities of thermal spray technology in the OEM and repair industries.

The thermal spray coating technology has been used in various industry ranges from aerospace to electronic industry and the utilization of this technology is growing fast in the industrial country. The market of thermal spray coating in Indonesia is widely opened, but there still few utilization from the industry and thermal spray workshop due to the limitation of technology and equipment.

This course :

  1. Provides a thorough grounding and understanding of thermal spray processes,
  2. Presents the complex scientific concepts in terms of simple physical models, and
  3. Integrates this knowledge to practical applications and accepted thermal spray practices.

TRAINING MATERIAL OUTLINE :
1. What is Thermal Spray Coating (an introduction)

  • Definition
  • History
  • Coating Build-Up
  • Market Segmentation

2. Pre-Spray Treatment

  • Introduction
  • Surface Cleaning
  • Substrate Shaping
  • Surface Activation
  • Masking

3. Thermal Spraying Techniques

  • Introduction
  • Flame Spraying
  • Atmospheric Plasma Spraying
  • Arc Spraying
  • Detonation Gun Spraying
  • High Velocity Oxy Fuel Spraying
  • Vacuum Plasma Spraying

4. Material Used for Spraying

  • Method of Powders Production
  • Method of Powders Characterization
  • Spray Drying
  • Cladding
  • Mechanical Alloying
  • Self Propagating High Temperature Synthesis

5. Post Spray Treatment

  • Heat Treatment
  • Impregnation
  • Finishing

6. Method of Coating Characterization

  • Method of Microstructure Characterization
  • Mechanical Properties of Coating
  • Physical Properties of Coating
  • Chemical Properties of Coating

7. Properties of Coating

  • Mechanical Properties
  • Thermophysical Properties
  • Electric Properties
  • Magnetic Properties
  • Optical Properties
  • Corrosion Resistance

8. Application of Coating

  • Corrosion Protection
  • Iron and Steel Industries
  • Energy Generation and Transport
  • Non Ferrous Metal Industries
  • Paper Industries

9. Safety and Hazardous

INVESTATION PRICE/PERSON :

  1. Rp 8.500.000/person (full fare)  or
  2. Rp 8.250.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

FASILITAS UNTUK PESERTA :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Dr. Eng. Budi Prawara is graduated from Material Engineering (Thermal Spray Coating) University of the Ryukyus Japan for his Doctorate program. He work as researcher at research center of electric power and mechatronics – LIPI (Lembaga Ilmu Pengetahuan Indonesia) and his structural position is as head of Subdivision of mechatronic facilities. His core expertise is material engineering and surface engineering(rekayasa permukaan). Related to training, Dr. Eng. Budi Prawara has taught training class on topics related to Thermal Spray Coating, including heat treatment. As researcher he has researched numerous number such as Heat treatment to steel AISI H13 with process of Austempering, Tempering and Martempering, Defect influence at Thermal Spray Coating to Thermal Properties, heat treatment of Thermal Spray Coating with process of Spark Plasma Sintering, Deposition of Ceramic Matrix Composite Coating with HVOF Thermal Spray Coating for worn out and impact resistance application, Heat Treatment of Ni-Base Self Flux Alloy (SFA) Coatings by Spark Plasma Sintering, Station Charging System for electric Motor, designing of Cooling System at Dies High Pressure Die Casting/HPDC, designing of Thermal Spray Coating with High Velocity Oxygen Fuel (HVOF) System, designing of Dies HPDC at otomotive component, etc., and he has published its to academics media/journal and has spoken at seminars or conferences in Indonesia and abroad.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

HVAC System : Operation And Maintenance (BANDUNG)

 

HVAC System : Operation And Maintenance (BANDUNG)

TRAINING TIME  :

  • 13 Nov 2023-16 Nov 2023
  • 04 Dec 2023-07 Dec 2023

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

INTRODUCTION :
Heating, Ventilation and Air-Conditioning System: Operation and Maintenance, covers the fundamentals and practical applications for understanding air-conditioning systems including the operation and maintenance. The comprehensive coverage of the basic theory, latest terminology, system analysis, optimization concept, and calculation methods to make this the most complete course available today in achieving an economical system. Fundamentals of air-conditioning system give comprehensively understanding air treatment and heat transfer principle in reducing energy cost, besides essential knowledge of fluid mechanics in air conditioning system. Those all play important role on operation and maintenance of air conditioning systems. Participating in this course, you enable to analyze and recommend the most effective solution available in air conditioning system for operation and maintenance, enable to utilize energy as possible as saving due to limited energy resources, and also you are familiar and better understanding of all aspects relate to efficient air-conditioning system in building.

WHO SHOULD ATTEND THIS TRAINING?:
a.    Technicians
b.    Mechanical and facility engineers
c.    Who responsible for operating and maintaining mechanical equipments for building

TRAINING MATERIAL OUTLINE :
1.    Basic Theory of HVAC
a.    Basic Concept of HVAC
b.    Basics of Heat and Measurement
c.    Thermodynamic Properties and Process
d.    Psychometrics and Air Treatment
e.    Global Issues in Environment
f.    Unit and Conversion

2.    Refrigeration and Refrigerants
a.    Montreal and Kyoto Protocol
b.    Refrigerant Types and Naming Rule for Refrigerants
c.    Refrigerant Requirements and Desirable Qualities
d.    Refrigerant Selection
e.    Suitable of Oil and Refrigerant
f.    Vapor Compression and Vapor Absorption Cycles
g.    Evaporative Cooling and Cooling Tower
h.    Storage System
i.    Water Systems and Unitary Systems

3.    Air Distribution System
a.    Unitary and Central System
b.    Single-Zone Systems
c.    Multiple-Zone Systems
d.    Terminal Reheat Systems
e.    Dual-Duct or Multi-zone System
f.    Pressure Drop in Duct
g.    System Balancing
h.    Centrifugal Fans and Their Characteristics
i.    Air Distribution in Rooms
j.    Diffusers and Induction

4.    Hydronic System
a.    Water and Refrigerant Piping
b.    Comparison of Water and Air as Heat-Conveying Media
c.    Heat Distribution from Hot-Water System
d.    High-Temperature Water Systems
e.    Available Pipe and Tubing
f.    Pressure Drop in Water Piping Installation
g.    Pressure Drop in Refrigerant Piping Installation
h.    Pump Characteristic and Selection

5.    Basic Automatic Controls
a.    Basic Electricity and Magnistism
b.    Introduction to Automatic Controls
c.    Automatic Control Components and Applications
d.    Troubleshooting Basic Control

6.    Safety, Tools, and Equipment
a.    General Safety Practices
b.    Tools and Equipment
c.    Fasteners
d.    Tubing and Piping
e.    Calibration Instrument
f.    General Maintenance

7.    Leak Detection, Pumping Down and Charging
a.    Dye Systems
b.    Test Pressures
c.    Methods of Testing
d.    Bubble Test
e.    Halide Torch
f.    Electronic Leak Detector
g.    System Evacuation
h.    Refrigerant Recharging
i.    Refrigerant Recovery
j.    Recycling and Reclaiming

8.    Operating Principles and Symptoms
a.    Temperature, Humidity and Air Motion
b.    Air Measurement
c.    Calculating the Operating Head Pressure
d.    Compressor Pressure Ratio
e.    Air Handling Unit
f.    Fan Coil Unit
g.    Filter Check
h.    Troubleshooting and Symptoms of System Faults
i.    Troubleshooting Refrigeration Systems
j.    Troubleshooting Hydronic Systems
k.    Troubleshooting Air Distribution Systems

9.    Service Diagnosis and Repair
a.    Definition of Reparation
b.    Replacing a Thermostatic Expansion Valve
c.    Replacing the Filter Drier
d.    Compressor Efficiency Test
e.    Water Cooled Condensers: Scale and Corrosion
f.    Compressor Motor Burn-out: System Flushing
g.    Pressure Controls
h.    Special Duct Problems and Duct Maintenance
i.    Special Piping Problems and Hydronic Maintenance

INVESTMENT PRICE/PERSON :

  1. Rp 8.750.000/person (full fare) or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
DR. Ir. I Made Astina, M.Eng. is currently assistant professor of mechanical Engineering, Faculty of Mechanical and Aerospace Engineering ITB. He graduated from Mechanical Engineering Department ITB in 1992. Prior to his Ph.D. obtainment in Engineering (thermodynamics, school of science for open and environmental systems) from Keio University Tokyo, Japan in 2004, he received Master of Science in Engineering (mechanical engineering department) from the same university in 1997. His researches concern on thermodynamic, development of new thermal systems, thermodynamic cycles, air conditioning and refrigeration systems. His papers were published in international and national journals, besides he also presents his papers in international and national seminars. Besides teaching at the university, he also has experiences to give short courses for industrial practical engineers and publics and to collaborate practical consultant works.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Fluid Flow – Gas Metering And Custody Transfer (BANDUNG)

 

Jadwal Training Info Seminar

Fluid Flow – Gas Metering And Custody Transfer (BANDUNG)

Tanggal

  • 18 Sep 2023-22 Sep 2023
  • 09 Oct 2023-13 Oct 2023
  • 30 Oct 2023-03 Nov 2023
  • 11 Dec 2023-15 Dec 2023

Pukul
09.00-16.00 WIB

Tempat :
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVE :
This course is developed for engineers and technicians who need to have a practical knowledge of selection, installation and commissioning of fiscal metering equipment. It is for those primarily involved in achieving effective results in industrial processes. This would involve the design, specification and implementation of control and measurement equipment. The course focuses on practical applications, with special attention to installation considerations and application limitations when selecting or installing different measurement or control instruments for fiscal metering.

TRAINING MATERIAL OUTLINE :
1. Basic Fluid Flow:

  • Fluid property
    • Density
    • Viscosity
    • Surface tension
    • Modulus elasticity
  • Compressible & Incompressible flow
  • Fluid Flow
    • Continuity Equation
    • Bernoulli Equation
  • Pipe fluid flow
  • Fluid Flow Measurement

2. Performance Characteristic of Flowmeter

  • Accuracy
  • Repeatability
  • Performance Measure
  • Calculation

3. Head Flow Meter

  • Orifice
  • Sizing
  • Secondary Instrument
  • Calculation
  • Standard AGA3

4. Turbine Meter

  • Systems
  • Properties
  • Characteristics
  • Standard AGA7

5. Ultrasonic Flowmeter

  • Ultrasonic Flowmeter
  • Types
  • Application
  • Standard AGA9

6. Oil Transfer Meter:

  • Meter Run
  • Proving Skid
  • Meter Proving
  • Meter Factor
  • Base Prover
  • Proving Run
  • Prover Pass
  • Prover Round Trip
  • Proving Counter

7. Shipping Calculate Volume & Calculate Correction:

  • Temperature material
  • Pressure material
  • Oil Temperature
  • Oil Pressure
  • Sediments and water
  • Calculate Meter Factor

8. Retroactive Meter Factor

  • Manual retroactive factor

9. Calculation Sample:

  • Flow calculation
  • Oil Quantity measurement

10. Use Measurement Systems in MIGAS Activities

WHO SHOULD ATTEND THIS TRAINING?

  • Instrumentation Engineers & technicians
  • Design & Process Engineers
  • Operation Engineer
  • Well testing group
  • Production Operation
  • Reservoir Engineering & technicians
  • Maintenance Superintendent & Supervisor

INVESTATION PRICE/PERSON :

  1. Rp 9.750.000/person (full fare)  or
  2. Rp 9.500.000/person (early bird, payment 1 week before training) or
  3. Rp 9.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flashdisk: Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Dr. Ir. Endra Joelianto is an expert in control engineering. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust PID Controller, Advanced Process Control, Industrial Automation using PLC/DCS. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosophy (PhD.) in Control Engineering in 2001 from Department of Engineering,The Australian National University, Australia.

He is coordinator of Intelligent Control and Automation, and founder of PLC Research Group, Laboratorium Instrumentasi dan Kontrol (LINK), Departemen Teknik Fisika, Institut Teknologi Bandung. He was the founder and the director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  The Schneider-OMRON PLC Training Center has cooperation with PT. Schneider Electric Indonesia, PT. OMRON Corporation Japan, Invensys WONDERWARE. He was the project leader for TPSDP Retooling Program Batch II-DIKNAS for Training Program on “INDUSTRIAL AUTOMATION USING PLC” 2004 and Co-provider for the same retooling program Batch II on “INDUSTRIAL CONTROL AND AUTOMATION” by PT. Cahaya Sumirat, Bandung. In 2005, he leads the retooling project entitled PLC for Industrial Control and Automation at the Department of Engineering Physics, ITB

He attended several professional trainings on PLC, DCS and Instruments Calibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advance PLC OMRON, Jakarta (2004), Cleaner Production: Application in Industries, University of Kwazulu-Natal, South Africa-ITB, Bandung (2005). Advanced Process Control, ASPEN Tech., Jakarta, (2005)

He serves as instructor either for public, universities or in-house training on instrumentation and process control to universities, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Petrokimia Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PT. ALSTOM Indonesia, PERTAMINA, British Petroleoum, Maxus, Amoseas, PT. Nusa Halmahera Mineral, PT. Indonesia Jaya Power, Indonesia Power-Paiton, PT. Riau Pulp and Paper, Indonesian Cement and Concrete Institut (ISBI), LIPI-Bandung, LAPI-ITB, POLMAN-Bandung, etc.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pump Selection, Design and Operation for Oil and Gas Surface Production Facilities

 

Pump Selection, Design and Operation for Oil and Gas Surface Production Facilities

Tanggal

  • 02 Oct 2023-04 Oct 2023
  • 15 Nov 2023-17 Nov 2023
  • 06 Dec 2023-08 Dec 2023

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.
Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.
Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

INVESTMENT PRICE/PERSON :

  • Rp. 7.950.000/person (full fare) or
  • Rp. 7.750.000/person (early bird, payment 1 week before training) or
  • Rp. 7.500.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Tas
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

OBJECTIVES :
After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.
  • Diagnostic of oil and gas flow performance under actual pumping drive mechanism and future performance with current handling processes.
  • Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system.

AUDIENCE:
No specified (Operator/Sr. Operator/Engineer or Non Engineer)

COURSE OUT-LINE
• Introduction to Oil and Gas Production Operation
• Oil Surface Production Facilities
o. Well Equipments
o. Pigging System
o. Separator
o. Gas Scrubber
o. Gas Dehydarator
o. Pumps : Centrifugal, Reciprocating, Diaphragm

• Gas Surface Processing Facilities
o. Gas Sweetening
o. Heat Exchanger
o. Fractionation, Liquefaction, Refrigeration System
o. Compressor

• Pump Basic Theory
o. Centrifugal Pump
o. Conservation of Mass
o. Specific Velocity
o. Pump Performance
o. Cavitations

• Pump Specification
o. Pump Specification
o. Flow Capacity
o. Fluid Properties
o. Head
o. Net Positive Heads
o. Rotation Determination and Pump Types
o. Viscous Fluid Correction
o. Material Selection
o. Prime Movers Selection

• Pump Application
o. Pump Installation Plan
o. Pump Application Example

• Pump Construction
o. Pump Classification by Impeller
o. Pump Classification by Casing
o. Pump Classification by Stage Number
o.Pump Classification by Axis Position

• Pump Operation
o. Head Capacity Curve
o. Parallel and Serial Operation
o. Capacity Regulator
o. Water Hummer
o. Surging
o. Pressure Fluctuation
o. Automatic Operation

• Pump Instalation
o. Horizontal Instalation
o. Vertical Instalation
o. Submersible Instalation
o. Pipping System
o. Vibration and Noise Protection

• Pump Maintenance
o. First Inspection
o. Operation Condition Observation
o. Safety Instrument
o. Maintenance Management
o. Overhaul

• Pump Trouble Shooting
o. General Trouble Shooting
o. Submersible Pump Trouble Shooting

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Analisis Getaran Dalam Perawatan Rotary Equipment (BANDUNG)

 

Analisis Getaran Dalam Perawatan Rotary Equipment (BANDUNG)

TRAINING TIME : 

  • 09 Oct 2023-12 Oct 2023
  • 20 Nov 2023-23 Nov 2023
  • 18 Dec 2023-21 Dec 2023

VENUE :  Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :  4 hari

TUJUAN TRAINING:
Agar peserta memahami penyebab getaran yang terjadi pada mesin, akibat-akibatnya, teknik-teknik inspeksi atau pemanfaatan getaran mesin, batas-batas  getaran maksimum yang diizinkan.

CAKUPAN MATERI TRAINING:

  • Dasar-dasar getaran
  • Karakteristik getaran
  • Unit pengukuran
  • Parameter getaran
  • Pemilihan parameter pengukuran
  • Tranducer getaran
  • Pengukuran getaran
  • Batas-batas getaran yang diizinkan
  • Interpretasi dan analisis getaran
  • Karakteristik getaran kerusakan mesin
  • Instalasi pengukuran tipe portable
  • Instalasi pengukuran tipe permanent dan data akuisisi
  • Hasil pengukuran
  • Trouble shooting guide gas turbin
  • Trouble shooting guide centrifugal process pump
  • Analisis vibrasi dan tribologi mesin rotasi
  • Analisis vibrasi Reciprocating Engine & Reciprocating Compressor

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?:
Engineer & Operator serta semua pihak yang ingin memahami topik ini.

INSTRUCTOR :  Ir. Syahbardia, MT.  dan Tim

INVESTATION PRICE/PERSON :    

1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  • Modul Training
  • Flashdisk Training berisi materi training
  • Sertifikat
  •  ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Ir. SYAHBARDIA, MT.  alumni dari teknik mesin Institut teknologi Bandung, ITB (sarjana), dan teknik material ITB untuk program magister. Beliau pernah menjadi dosen di Politeknik ITB/POLBAN dan sekarang Beliau menjadi dosen di jurusan teknik di universitas Pasundan, Bandung. Beliau memiliki pengalaman lapangan praktis sebagai mechanical engineer ketika beliau bekerja, seperti di IPTN, PINDAD, dan PAL. Ir. Syahbardia,MT. sudah sering menjadi instruktur di training-training industri untuk perusahaan-perusahaan di Indonesia. Diantara judul-judul yang Beliau sampaikan adalah Predictive and Preventive Pump Maintenance, Compressor Characteristic Maintenance & Troubleshooting, Rotary Equipment Maintenance, Lubrication, Operation, Maintenance and Trouble Shooting, Materials Selection and Knowledge for Engineers, Centrifugal Compresor & Steam Turbine Performance, Welding Inspection, Turbine & Generator Operation, Boiler Water Treatment, Pump Operation and Maintenance, Electrical Motor Control System, Corrosion and Cathodic Protection, Fluid Flow Measurement, Generator Preventive Maintenance, Heavy Equipment Management, Preventive and Predictive Maintenance, dan lain-lain.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

PLC (Programmable Logic Controller) : Principles, Operation and Programming (BANDUNG)

 

PLC (Programmable Logic Controller) : Principles, Operation and Programming (BANDUNG)

Tanggal

  • 09 Oct 2023-12 Oct 2023
  • 13 Nov 2023-16 Nov 2023
  • 18 Dec 2023-21 Dec 2023

Pukul
09.00-17.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION:
PLC Programming and Interfacing offers participants a hands-on approach to implementing industrial control by integrating typical plant floor electrical components with PLC-based controllers. Participants will learn to identify and connect field inputs and outputs;  communicate with, and program PLC-based controllers.

TRAINING OBJECTIVE:
After completing this training program, participants should be able to understand the configuration and lay-out of PLC system, review the system addressing, configure various components of PLC. Understand how PLC software user interface is laid out and learn how to customize the lay-out, review system addressing and I/O addressing as it applies to the PLC software, configure the various components of the PLC software, understand the difference between on-line and off-line programming, documentation troubleshooting, and explore the system health and diagnostic features of PLC software.

TRANING MATERIAL OUTLINE:

  • Overview to Industrial Process Control and Controller System
  • Overview of PLC System
  • PLCs Hardware
  • PLCs Interface Driver
  • PLCs Module Configuration
  • Software Programming
  • Programming Memory and Numbering System
  • Programming Timer and Counter
  • Programming Program Control Instruction
  • Programming Register
  • Programming Math Instruction
  • Programming PLC with State Transition Methodology
  • Comprehensive Practice
  • Interactive Discussion

TRAINING METHODES:

  •     Tutorial
  •     Discussion
  •     Practice

FACILITIES USED:

  •     PLC
  •     Software Simulator
  •     Miniature Plan

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flashdisk contain training material
  • Certificate
  • NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Foto
  • Training room with full ac facilities and multimedia
  • Lunch and twice coffee break everyday of training
  • Qualified Instructor
  • Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

Trainer     
H. MH Sapto Widodo, M.Sc and Hadi Prasetyo, MT
H. MH Sapto Widodo, M.Sc was born in June 9th 1957. He got his education of master of science in electrical engineering, System Design and Technology, Fachhochschule Darmstadt, Germany. He also has followed some courses for improving his competencies in Indonesia and abroad. He is head of electrical department at P4TK BMTI Bandung atau TEDC Bandung(technical education development  center) and he also as lecturer at the department. He has experiences in some consultants. Some training sectors related to his fields are as follows Electrical & Mechatronic, including these related fields: Electrical Appliances, Electrical Instalation, Refrigeration & Air Conditioning, and Industrial Automation.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

2024

informasi-seminar.com | infoseminar.co.id