Pipeline Design And Intregrity Engineering (YOGYAKARTA + KELAS KHUSUS)

Info Seminar

Pipeline Design And Intregrity Engineering (YOGYAKARTA + KELAS KHUSUS)

Deskripsi Pelatihan
Piping and Pipeline Engineering: Design, Construction, Maintenance, Integrity, and Repair describes the fundamental steps to any successful piping and pipeline engineering project, whether it’s routine maintenance or a multi-million dollar project new. Explores the understanding of the qualitative details, calculations, and techniques are essential in supporting competent decisions. He pairs coverage of real-world practice with the technical principles that underlie the material, design, construction, inspection, testing, and maintenance.

Participants will understand the seven principles that will help establish a balance between production, cost, security and integrity of piping and piping systems.

Through this course participants learn about the coverage of codes and standards, design analysis, welding and inspection, corrosion mechanisms, fitness-for-service and failure analysis, and an overview of valve selection and application. It features the technical basis of piping and pipeline code design rules for normal operating conditions and occasional loads and addresses the basic principles of materials, design, fabrication, testing and corrosion, and its effect on the integrity of the system.

Tujuan Pelatihan
Setelah mengikuti pelatihan ini, peserta diharapkan:

  1. The Participant will gain an in-depth knowledge of pipe and fitting material specifications, manufacturing, fabrication process and their influence on mechanical properties of strength and toughness, to help in material selection and failure analysis
  2. Understand the technical background to the design formulas, and their application to the design of piping systems and pipelines. The course addresses rules of good practice in layout of piping systems for reliable operation
  3. Practical understanding of piping and pipeline mode of failure, corrosion mechanisms, how to recognize them, classify them and resolve them
  4. The participant will learn risk assessment for piping & pipeline i.e. probability of failure and their consequences if failures occur
  5. The participant will be introduced to the latest techniques and research in piping and pipeline integrity to analyze a degraded condition due to either corrosion or mechanical damage.

Materi / Outline Pelatihan

  1. Introduction
    • History of Pipeline Technology
    • ASME Codes and Standards
    • API Standards
    • NACA, MSS-SP, PFI Standards
    • Fundamentals of Maintenance and Integrity
  2. Materials Selection
    • Practical Aspects of Metallurgical Properties
    • Chemistry and Material Test Reports
    • Linepipe manufacturing
    • Fabrication and Fittings specification
    • Mechanical Properties: Strength and Toughness
    • Material selection technique
  3. Welding
    • Overview of Pipe and Pipeline Welding Practice
    • API 1104 and ASME IX Requirement
    • Welding In-service: Challenge and Solutions
  4. Strength Integrity for Sustained Loads
    • Operating and Design Pressure
    • How to Establish the System Design Pressure
    • Introduction to Pressure Relief Valves
    • Pipe and Pipeline Sizing Formula with Applications
    • Rules of Good Practice in layout
    • Pump and Compressor Piping
    • How to Support a piping System
    • Review of Support Types and their Application
    • Lesson learned from Poor Support Practices
    • Temperature Effects
    • Flexibility Layout Analysis
    • Temperature Transients and Fatigue Damage
    • Vibration In Service
    • Mechanical and Hydraulic Induced Vibration in Piping
    • How to Measure Analyze Resolve Vibration
  5. Strength Integrity for Occasional Loads
    • Pressure Transients
    • Recognizing and Solving Liquid Hammer
    • Pump Station Transients
    • Study of Pipeline Failures Due to Transient
    • Two-Phase Liquid -Vapor Transients
    • Two-Phase Liquid-Gas Transients
    • Gas Discharge Transients
    • Buried Pipe
    • Soil Loads
    • Surface Loads
    • Expansion of Buried Pipe
    • Soil settlement
    • Pipeline Failures
    • Study Case Histories
    • Understanding Why Failures Occur and How to Avoid Them
  6. Corrosion Assessment and Protection
    • Introduction to Practical Corrosion
    • Classification of Corrosion Mechanisms
    • General Wall Thinning
    • Local Corrosion: Galvanic Effects
    • Crevice Corrosion
    • Pitting Corrosion
    • Environmental Effects
    • Hydrogen and H2S Effects
    • Microbiological Corrosion
    • Corrosion Protection
    • Cathodic Protection Overview
  7. Corrosion Assessment and Protection
    • Introduction to Practical Corrosion
    • Classification of Corrosion Mechanisms
    • General Wall Thinning
    • Local Corrosion: Galvanic Effects
    • Crevice Corrosion
    • Pitting Corrosion
    • Environmental Effects
    • Hydrogen and H2S Effects
    • Microbiological Corrosion
    • Corrosion Protection
    • Cathodic Protection
  8. Risk Assessment Overview
    • Introduction to risk assessment
    • Risk Criteria
    • Probability of failure
    • Third party damage
    • Corrosion aspects
    • Design aspects
    • Incorrect operation
    • Consequence of failure
    • Product hazard
    • Spill assessment
    • Dispersion calculation
    • Receptors
    • Risk Representation
  9. Maintenance & repair
    • Flange and Mechanical Joints
    • Overview of Different Types of Flanges and Application
    • Causes of Flange Leaks and How to Resolve
    • Case Study of Flange Failure
    • Assembly of Flange Joints and Leak Tightness
    • Pressure and Leak Testing
    • The Difference Between Leak Testing and Pressure Testing
    • Review of Difference Testing Techniques
    • The Purpose of Hydro test
    • How to Conduct a Hydro test
    • Pipeline and Piping Systems Testing
    • Pneumatic Testing
    • Repair Techniques
    • The New ASME Repair Standards
    • The Fundamentals of Repair package
    • Pipe and Component Replacement
    • Grinding and welding
    • Welded Sleeve: Type A and B
Jadwal Pelatihan dan Seminar Lainnya :
Basic Accounting Knowledge and Practices For Mining Industry Accounting, Costing and Control (JAKARTA)

JADWAL DAN INVESTASI PELATIHAN

  • Yogyakarta / Cavinton Hotel | Rp5.250.000/peserta | Rp6.300.000/peserta
  • Semarang / Ibis Simpang Lima Hotel | Rp5.900.000/peserta
  • Malang / Ibis Malang Hotel | Rp5.900.000/peserta
  • Solo / Ibis Solo Hotel | Rp5.900.000/peserta
  • Jakarta / Ibis Kemayoran Hotel | Rp7.000.000/peserta
  • Surabaya / Santika Hotel  | Rp7.000.000/peserta
  • Bandung / Serella Hotel | Rp7.000.000/peserta
  • Bali / Santika Hotel | Rp8.100.000/peserta
  • Batam / Nagoya Plaza Hotel | Rp8.100.000/peserta
  • Balikpapan / Ibis Hoel | Rp8.100.000/peserta

(non residential)

Alternative Tanggal :

  • 3-5 Januari 2017
  • 10-12 Januari 2017
  • 17-19 Januari 2017
  • 24-26 Januari 2017
  • 31 Januari-2 Februari 2017
  • 7-9 Februari 2017
  • 14-16 Februari 2017
  • 21-23 Februari 2017
  • 31 Februari-2 Maret 2017
  • 7-9 Maret 2017
  • 14-16 Maret 2017
  • 21-23 Maret 2017
  • 29-30 Maret 2017
  • 4-6 april 2017
  • 11-13 April 2017
  • 18-20 April 2017
  • 25-27 April 2017
  • 2-4 Mei 2017
  • 8-10 Mei 2017
  • 16-18 Mei 2017
  • 22-24 Mei 2017
  • 29-21 Mei 2017
  • 6-8 Juni 2017
  • 13-15 Juni 2017
  • 20-22 Juni 2017
  • 4-6 Juli 2017
  • 11-13 Juli 2017
  • 18-20 Juli 2017
  • 25-27 Juli 2017
  • 1-3 Agustus 2017
  • 8-10 Agustus 2017
  • 14-16 Agustus 2017
  • 22-24 Agustus 2017
  • 29-31 Agustus 2017
  • 5-7 September 2017
  • 12-14 September 2017
  • 18-20 September 2017
  • 26-28 September 2017
  • 3-5 Oktober 2017
  • 10-12 Oktober 2017
  • 17-19 Oktober 2017
  • 24-26 Oktober 2017
  • 31 Oktober – 2 November 2017
  • 7-9 November 2017
  • 14-16 November 2017
  • 21-23 November 2017
  • 28-30 November 2017
  • 5-7 Desember 2017
  • 12-14 Desember 2017
  • 19-21 Desember 2017
  • 27-29 Desember 2017

Ketentuan lain Penyelenggaraan Pelatihan :
Pelatihan dapat diselenggarakan setiap harinya diluar jadwal diatas, apabila peserta / instansi terkait berencana mengirimkan peserta sesuai dengan minimal kuota 2 peserta.

Fasilitas Pelatihan

  1. Sertifikat Pelatihan (Certificate)
  2. Qualified instructure
  3. Meeting room Hotel dengan Lunch dan 2 kali Coffe Break
  4. Exclusive Training kits
  5. Exclusive Bagpack
  6. USB / flashdisk berisi materi training soft copy serta Materi training hardcopy
  7. Souvenir
  8. City Tour
  9. Layanan booking hotel / penginapan
  10. Antar jemput dari Bandara/ Stasiun menuju Hotel Penginapan (minimal 2 peserta dari 1 instansi yang sama)
  11. Antar jemput peserta dari hotel penginapan menuju hotel pelaksanaan training (minimal pengiriman 4 peserta dari 1 instansi yang sama)

Metode Pelatihan

  1. Presentasi
  2. Diskusi dan Tanya Jawab
  3. Studi kasus
  4. Brainstorming
  5. Praktek

Instructure
Ir. Y. Agus Jayatun,MT.,IPPdan Tim

 

Registrasi Tidak Mengikat
  1. Judul Training di atas bisa dijadikan sebagai topik INHOUSE TRAINING. Jika Anda membutuhkan bantuan free konsultasi bisa hubungi 0851 0197 2488/ 08998121246
  2. (required)
  3. (valid email required)
  4. (required)
  5. (required)
  6. (required)
  7. (required)
  8. Mohon untuk tidak memesan tiket perjalanan / akomodasi penginapan sebelum ada kepastian training akan berjalan.
  9. (valid email required)
  10. PENTING : Harga dan Silabus Training sewaktu-waktu bisa berubah. Disesuaikan dengan kondisi terakhir. Jadi MOHON baca email PENAWARAN yang dikirimkan dari Mitra Info Seminar
 

cforms contact form by delicious:days

Jadwal Training Jakarta

  • Effective Leadership (JAKARTA)

    Effective Leadership (JAKARTA) Tanggal 19-20 Desember 2016 Jam Pelaksanaan 08.30 – 17.00 WIB Tempat Alternatif Hotel: Ibis Group, Amos Cozy, The Park Lane, Harris Group, hotel lainnya yang akan kami konfirmasi kemudian Pembicara / Fasilitator [...]
  • Manajemen Resiko Operasional Perbankan (JAKARTA)

    Manajemen Resiko Operasional Perbankan (JAKARTA) JADWAL 09-10 Januari 2017 06-07 Februari 2017 13-14 Maret 2017 12-13 April 2017 17-18 Mei 2017 01-02 Juni 2017 17-18 Juli 2017 21-22 Agustus 2017 27-28 September 2017 16-17 Oktober [...]
  • Aplikasi Pembiayaan Syariah (JAKARTA)

    Aplikasi Pembiayaan Syariah (JAKARTA) Tanggal 19-20 Desember 2016 Jam Pelaksanaan : 09.00 – 16.00 WIB Tempat : Alternatif Hotel: Ibis Group, Amos Cozy, The Park Lane, Harris Group, hotel lainnya yang akan kami konfirmasi kemudian Pembicara / Fasilitator  (alternaif): Tim Trainer [...]
  • Kompetensi & Perilaku Pimpinan Cabang (JAKARTA)

    Kompetensi & Perilaku Pimpinan Cabang (JAKARTA) Tanggal 16-17 Januari 2017 06-07 Februari 2017 07-08 Maret 2017 06-07 April 2017 15-16 Mei 2017 29-30 Juni 2017 20-21 Juli 2017 30-31 Agustus 2017 20-21 September 2017 09-10 [...]
  • Customer Relationship Management (CRM) For Banking Industry – JAKARTA

    Customer Relationship Management (CRM) For Banking Industry – JAKARTA Tanggal 14-15 Desember 2016 12-13 Januari 2017 07-08 Februari 2017 06-07 Maret 2017 10-11 April 2017 22-23 Mei 2017 27-28 Juni 2017 17-18 Juli 2017 28-29 [...]
About Petrus Soeganda 11261 Articles
Petrus Soeganda. Pengelola website infoseminar dan pelatihan. Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 08998121246