Jadwal Training 2024

Low Voltage Switchgear – Maintenance, Testing & Troubleshooting

 

Low Voltage Switchgear – Maintenance, Testing & Troubleshooting

Tanggal
25-27 September 2012

Pukul
09.00-16.00 WIB

Tempat
Papandayan Hotel,
Bandung

OBJECTIVES
At the completion of this course, students will have knowledge of breaker and breaker protective device operation and will be able to remove and replace all breaker components.

COURSE CONTENT

  1. Introduction to low voltage switchgear
  2. Load center arrangements
  3. Nature of short circuits and arc interruption
  4. Switchgear print reading
  5. Insulated case circuit breakers
  6. Switchgear panel instrumentation
  7. Fuses and protective relays
  8. Power system and equipment grounding
  9. Breaker adjustments and lubrication
  10. Breaker front and rear frame separation process
  11. Maintenance and troubleshooting

WHO SHOULD ATTEND
This course is designed for personnel responsible for maintenance, testing and troubleshooting low voltage power circuit breakers, protective relays, breaker trip devices and switchgear panels. The lab provides students with the opportunity to work on a variety of low voltage circuit breakers.

COURSE METHODS    

  1. Presentation
  2. Discussion
  3. Case Study
  4. Evaluation
  5. Practise

INSTRUCTORS
Ir. Teguh Santosa

Investasi
Rp 6,950,000,-/peserta (Non Residential)
Special Rate Rp 5,500,000- for min. 3 participant

FACILITIES    

  • Module / Handout
  • Sertificate
  • SouvenirS
  • Training Kit

Kode : 4578922

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electric Power System Protection

Jadwal Training

Electric Power System Protection Tanggal 10-13 September 2012 24-27 September 2012 Pukul 09.00-16.00 WIB Tempat Papandayan Hotels Bandung Trainers Ir. Teguh Santosa & Team Investasi ... Baca Selengkapnya

Electric Power System Protection

 

Electric Power System Protection

Tanggal
10-13 September 2012
24-27 September 2012

Pukul
09.00-16.00 WIB

Tempat
Papandayan Hotels Bandung

Trainers
Ir. Teguh Santosa & Team

Investasi
Rp  8,500,000,-/ participant Nett Non Residential
** Pendaftaran minimal 3 orang biaya training Rp. 7.550.000,-/participant nett Non Residential**

Fasilitas

  1. Module
  2. Certificate
  3. Souvenir
  4. Training Kit
  5. Meeting Room Hotel

Metode

  1. Presentation
  2. Discussion
  3. Case Study
  4. Evaluation
  5. Pre test & Pos Test

Who Sould Attends  
Manager, Supervisor, Group Leader, Section Head, Team Leader : Production, PPIC, Quality, Managers involved with energy management, Electrical engineers and Technical Staff who have to deal with the aspect of electrical and industrial power system protection, control and operation.

Description  
Construction of generation plants, transmission and distribution of electrical energy systems is a costly business. At both levels of national grid systems and local industrial plants, two important aspects are at the heart of this strategic industry. These are the reliability of energy delivery to meet customers’ demands and safe operation. At different stages of energy processing i.e. at the generation, transmission and energy delivery stage, protection of personnel and equipment is of prime importance. To achieve these goals, protection schemes are to be employed. The philosophy adopted in any protection scheme is to clear faults with a minimum system disruption, at a high speed, and in a simple and economical way. The course deals with different types of protection schemes used in large networks and those adopted in industrial plants. It describes some of the important components such as relays, comparators and other protective gears, and techniques and calculations used for their settings. The course also reflects on recent development and what are new in this important field of electricity industry.

Objectives
The following sees the benefits from this course:

  1. On organizational level
    • It introduces the subject of protection as an art where technical and economical constraints are to be met and compromised to achieve certain engineering requirements.
    • Learn to develop and manage well-protected plants that lead to a higher security, less outages and hence better profitability.
    • The course introduces new technologies used in relaying systems such as microprocessor and computer relaying which put organizations at the forefront of modern electricity industries.
    • Helps organizations in making appropriate decisions at times of system expansion or in situations where new developments become necessary.
    • Help organizations to understand causes of system failures, means available for remedies and hence better system management and operation with minimum investment.
  2. Personal Impact
    • Introduces and acquaints attendees with different components used in protection schemes.
    • Ability to perform some basic essential calculations required for relay settings.
    • Establishes confidence in dealing with protection schemes installed for protecting personnel equipment to grantee flow of energy.
    • Learn how to assess protection performance.
    • Add knowledge on how to improve security level by designing better protection systems with aim to improve performance.
    • Learn about error sources introduced by some protection scheme components and how to overcome them.

Materi
1.    Fundamentals of Protection Practice and Basic Technology

  • Protective Gear.
  • Reliability
  • Selectivity
  • Speed, Stability and Sensitivity
  • Circuit quantities & conventions
  • Fault calculations

2.    CTs Requirements

  • Error in CTs and compensation
  • Accuracy limit current of CTs
  • Class X CTs and linear CTs
  • Transients in CTs
  • Practical conditions

3.    Static Relays

  • Circuits using analogue techniques
  • Digital techniques
  • Output and Tripping circuits
  • Electrical Interference
  • Future trends

4.    Protection Schemes and substation design diagrams

  • Generator protection
  • Motor protection
  • Transformer protection
  • Line Protection
  • Substation Design Diagrams

5.    Differential protection

  • Classification of differential protection
  • Direction comparison
  • Circulating current and balanced voltage systems
  • Transformer differential protection
  • Differential protection for generators and rotating machines
  • Line differential protection
  • Busbar-differential protection
  • Differential system with multiple restraint
  • High impedance differential system

6.    Industrial Power System Protection

  • Busbar arrangement
  • Discrimination
  • HRC fuses
  • Industrial circuit-breakers
  • Infeed fault current from induction motor
  • Automatic changeover systems
  • Voltage and phase reversal protection
  • Private generation

7.    Installation, testing and maintenance of protection systems

  • Installation of protection equipment
  • Testing protection schemes.
  • Pre-commissioning tests,
  • Installation resistance measurements
  • Secondary injection tests
  • C.Ts tests
  • Periodic maintenance
  • Setting and testing numerical protection

Kode : 43878792

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Programmable Logic Controller Using Siemens S7-400

 

Programmable Logic Controller Using Siemens S7-400

Tanggal
8-11 Oktober 2012
22-25 Oktober  2012

Pukul
09.00-17.00 WIB

Tempat
Aston Hotels Yogyakarta

Investasi
Rp 8.500.000,- / Participant Nett Non Residential

Objective
PLC Training is designed to instruct electrical control professionals on how to successfully integrate a PLC into actual day-to-day industial electrical processes. It not only deals with the hardware and software, but all the surrounding systems that must be compatible to achieve a safe and reliable control system.

PLC Training is also designed to help delegates keep abreast of the latest Siemens’s PLC technologies and techniques available in this area, this tutorial offers an excellent opportunity for delegates to ask specific questions and exchange ideas relating to their own applications.

Introduction
This section will begin with a discussion of basic theory of operation and how it is used to control a process. It will also identify potential applications and relate how PLC control compares with traditional methods of control. A discussion of the benefits of  PLC control will follow.

Hardware Configuration
This section will describe the various components used in the formulation of a PLC control system for Siemens S7-400. Included will be methods to select the correct features and capabilities to match the process requirements.

  • CPU sizes and types
  • Backplanes
  • Power supplies
  • I/O module types

Installation and Wiring Considerations
There are necessary steps that must be taken to ensure that the control system will be correctly installed to provide safe and reliable operation. Installation recommendations and techniques will be given for the following:

  • Power and grounding
  • Enclosures
  • Input devices and wiring methods
  • Output devices and wiring methods

Commissioning
This section will discuss the methods used and preparations that should be made to guarantee a smooth and troublefree system start-up.

Safety Issues and Techniques
This section will define the major safety issues relating to control systems. A number of techniques will be discussed to address these issues including:

  • Solid state switching
  • E-Stops
  • Power-up delays
  • Equipment re-starting
  • Watchdog circuits
  • MCR circuits

PLC Numbering Systems
PLC control system hardware and software use alternate numbering systems. The delegate will be exposed to the different base systems and how to convert to and from the decimal format.

Programming Siemens S7-400
The delegates will be instructed in the commands and logic necessary to assemble a basic PLC program to control an industrial process. The delegate will perform a simple programming exercise.    Interactive Discussion
This will be an opportunity for delegates to interact and trade relevant stories and experiences.

Programming Software
Various types of programming software will be introduced to the delegates. Techniques for simple program development and downloading will be demonstrated. Topics will include:

  • Program functions
  • Program keying and development
  • Connecting to the PLC
  • Set-up
  • Program downloading
  • Monitoring and diagnostics

Hardware will be available so that the delegate can get some hands on experience programming and downloading.

Structured Programming
The concept of structured and block programming will be explained. Methods and techniques will be described which can be used to organize and standardize PLC programs so that they can be easily understood.

Documentation Strategies
The various types of documentation required for effective installation, maintenance, and troubleshooting will be reviewed.

Programmable Logic Controller Troubleshooting
Troubleshooting a Programmable Logic Controller-based control system has its challenges and advantages. The necessary tools and techniques required to perform this will be covered. The use of programming software to monitor and diagnose process and hardware problems will be demonstrated.

Operator Interfaces
The various types of operator interfaces and how they can be used to enhance the control and diagnostic abilities of the Programmable Logic Controller will be discussed.

Data Acquisition
Methods of collecting and storing process data using the PLC s7-400 and peripheral computer stations will be described. Advanced data representation, graphics, and calculations using the computer to enhance the adaptive control capability of the Programmable Logic Controller based system will also be covered

Wajib diikuti oleh :
PLC Engineering and design personnel
Maintenance and technical services personnel
Process and operations personnel
Technical and process managers
Engineering and design personnel
Electrical consulting engineers
Electrical contractors

Trainer
Ir. Edwin Ardiasya & Team
Expert in Motors, Drives, Automation using DCS & PLC
System Integrator Siemens.

Kode : 4878302

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Training : Preventive Maintenance Of Electrical Equipment

 

Training : Preventive Maintenance Of Electrical Equipment

Tanggal
8-11 Okt 2012

Pukul
09.00-16.00 WIB

Tempat
(Yogyakarta) Hotel IBIS

TUJUAN :
Program preventive dan maintenance yang baik akan dapat menjamin reliabilitas sistem dari berbagai kejadian abnormal. Training ini akan memberikan pengetahuan tentang dasar-dasar perawatan dan pengujian terhadap peralatan listrik sesuai standard baku (IEC, IEEE, dll) untuk memperoleh unjuk kerja yang baik, dapat memperpanjang umur peralatan.

CAKUPAN MATERI TRAINING:

  1. Dielectric & electrical insulation maintenance & testing.
  2. Transformer preventive maintenance.
  3. Generator & electric motor preventive maintenance testing.
  4. Maintenance & testing of protective relays & over current.
  5. Electrical power system grounding & ground resistance testing.
  6. Lab-work in fault analysis.
  7. Lab-work using high voltage testing equipment.
  8. Interactive discussion

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?:

  1. D3 atau SLTA yang berpengalaman kerja minimal 3 tahun, dan atau setara.
  2. Teknisi, Operator dan Supervisor khususnya didalam bidang  perawatan dan reliability system.
  3. Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.
  4. Semua pihak yang ingin memahami topik ini

INVESTASI :
IDR 7.250.000 (full fare)
IDR 7.000.000 (earlybird)
IDR 6.750.000 (Group)

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Trainer
Tugino, ST , MT
He was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon, PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Lightning Protection (Instalasi Listrik dan Penangkalan Petir) RUNNING

 

Lightning Protection (Instalasi Listrik dan Penangkalan Petir) RUNNING

Tanggal
27-29 November 2012
11-13 Desember 2012

Pukul
09.00-16.00 WIB

Tempat
Yogyakarta

DESKRIPSI
Petir adalah sebuah cahaya yang terang benderang yang dihasilkan oleh tenaga listrik alam yang terjadi di antara awan-awan ataupun dari awan ke tanah. Kejadian ini sering kali terjadi apabila cuaca sedang mendung maupun terjadinya badai. Penyebab dari kerusakan bangunan yang diakibatkan oleh sambaran petir terutama adalah dari besar arus listrik yang dibawa oleh petir dan kecuraman arus listrik yang dibawa oleh petir, yang mana besarnya arus listrik dapat mencapai 200 kA. Kegagalan untuk melindungi kondisi kritis dan strategis seperti kilang, minyak & gas plant, proses petrokimia tanaman, bangunan, dll dapat menyebabkan kehilangan besar dalam produktivitas dan merugikan pendapatan. Kerusakan yang ditimbulkan dapat berupa kerusakan thermis seperti terbakar pada bagian yang tersambar, bisa juga kerusakan mekanis, seperti atap bangunan yang runtuh, bangunan yang retak dan lain sebagainya. Bahan bangunan yang paling parah bila terkena sambaran petir adalah yang bersifat kering, isolasi maupun semi isolasi, dan sangat mungkin mengakibatkan kerusakan lingkungan serta berakibat fatal bagi manusia hingga menyebabkan kematian.

Instalasi Penangkal Petir adalah suatu sistem dengan komponen dan peralatan yang secara keseluruhan berfungsi untuk menangkap petir dan menyalurkannya ke tanah. Sistem ini harus dipasang sedemikian rupa sehingga semua bagian dari bangunan beserta isinya atau benda yang dilindunginya terhindar dari bahaya sambaran arus petir baik sambaran arus petir secara langsung maupun sambaran arus petir secara tidak langsung. Komponen dari penangkal petir yang nantinya perlu diadakan pengecekan dan perawatan.

TUJUAN
Pelatihan ini bertujuan untuk:

  • Mendapatkan pemahaman yang lebih baik dari fenomena petir terutama bagi orang-orang dan Industri
  • Mendapatkan pemahaman lebih baik tentang perilaku petir, karakteristik, dan sistem perlindungan
  • Meningkatkan pengetahuan tentang sistem grounding dan semua aspek
  • Pengetahuan dasar efek sistem untuk kerusakan instalasi listrik jika terkena petir
  • Pengetahuan tentang spesifikasi dan Pengantar perlindungan petir dan grounding

MATERI

  • Karakteristik dan Fenomena petir
  • Jenis dan spesifikasi sistem proteksi petir
  • Pengujian sistem instalasi proteksi petir
  • Penilaian dan perbaikan sistem yang ada bila diperlukan
  • Jenis dan karakteristik landasan
  • Pengaruh sistem grounding untuk sistem proteksi petir
  • Lightning protection; ground system design calculation
  • Penilaian sistem proteksi petir

PESERTA

  • Electric Engineer /Supervisor/ Superintendent
  • Plant Maintenance Engineer / Supervisor
  • Plant and Process Engineer / Supervisor
  • Safety and Lost Prevention Engineer
  • Electrical and Mechanical Design Engineer

METODE
Pendekatan yang digunakan pada pelatihan ini meliputi class room presentation, games/simulasi, diskusi,  studi kasus individu dan kelompok

COORDINATOR
Tugino, ST, MT & Tim
(Ahli bidang instalasi listrik dan penangkal petir)

COURSE FEE
Rp 5.300.000,- /participant (non residensial)*

Special Rate:
Rp 4.500.000,- (non residensial – min 3 participants from the same company)

Fasilitas       

  • Module / Handout
  • Sertifikat
  • Training Kit
  • Coffe Break & Lunch
  • Souvenir

kode : 4989

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Instalasi Dasar Listrik (YOGYAKARTA) + (BANDUNG) + (BALI) + (LOMBOK) + (SOLO) + (BALIKPAPAN)

 

Instalasi Dasar Listrik (YOGYAKARTA) + (BANDUNG) + (BALI) + (LOMBOK) + (SOLO) + (BALIKPAPAN)

Tanggal
18 – 20 Juni 2013
25 – 27 Juni 2013
9 – 11 Juli 2013
23 – 25 Juli 2013
6 – 8 Agustus 2013
13 – 15 Agustus 2013
27 – 29 Agustus 2013
3 – 5 September 2013
17 – 19 September 2013
24– 26 September 2013
8 – 10 Oktober 2013
15 – 17 Oktober 2013
29 – 31 Oktober 2013
12 – 14 November 2013
26 – 28 November 2013
3 – 5 Desember 2013
10 – 12 Desember 2013
24 – 26 Desember 2013

Pukul
09.00-16.00 WIB

Tempat

  • Grand aston, Yogyakarta ( Rp. 7.500.000/ participant non residential, special price
    Rp. 7.000.000/participant for minimum 3 participants from the same company.
  • Hard Rock Hotel, Bali. ( Rp. 11.500.000/ participant non residential, special price
    Rp. 11.000.000/prticipant for minimum 3 participants from the same company.
  • Aston Hotel, Balikpapan ( Rp. 9.500.000/ participant non residential, special price
    Rp. 9.000.000/prticipant for minimum 3 participants from the same company.
  • Best Western Premiere Hotel, Solo ( Rp. 8.000.000/ participant non residential, special price
    Rp. 7.500.000/prticipant for minimum 3 participants from the same company.
  • Sheraton Senggigi Hotel, Lombok ( Rp.12.000.000/ participant non residential, special price Rp. 11.500.000/prticipant for minimum 3 participants from the same company.
  • Aston Tropicana, Bandung Rp. 8.500.000/ participant non residential, special price
    Rp. 8.000.000/prticipant for minimum 3 participants from the same company

TUJUAN
Pelatihan ini didesain dengan tujuan  menghasilkan Tenaga Teknik Ketenaga listrikan Industri yang memiliki kemampuan / keahlian memeriksa jaringan Instalasi Listrik Industri. Adapun sasaran dari program pealtihan ini antara lain agar peserta mampu:

  1. Memeriksa Kelaikan operasi Sistem LVMDP
  2. Memeriksa Kelaikan operasi Sistem SDP
  3. Memeriksa Kelaikan operasi suatu kabel / penghantar
  4. Memeriksa Kelaikan operasi Sistem Pentanahan
  5. Memeriksa Kelaikan operasi Sistem Pengasutan Motor
  6. Memeriksa Kelaikan operasi Suatu Motor Listrik

MATERI

  1. Pengenalan Sistem Jaringan Listrik Industri
    o    Elemen Dasar dan Sistem Jaringan Listrik Industri
    o    Alat Ukur dan Pemasangannya.
    o    Sistem Pentanahan.
    o    Motor Listrik dan Sistem Pengasutannya.
  2. Persyaratan K3 dalam Pemeriksaan Instalasi
    o    Persyaratan K3
    o    Peralatan K3 dalam pemeriksaan Instalasi Listrik.
    o    Cara Penggunaan Peralatan K3
  3. LVMDP dan SDP
    o    Elemen Dasar dan Pengawatannya.
    o    Pemeriksaan Kelaikan operasi pada LVMDP dan SDP
    o    Praktikum Pemeriksaan MDP & SDP
  4. Kabel / Penghantar Listrik
    o    Jenis dan Standar kodifikasi Kabel/Penghantar Listrik
    o    Pemeriksaan Kelaikan operasi suatu Penghantar/Kabel Listrik
    o    Praktikum Pemeriksaan Kelaikan Kabel/Penghantar.
  5. Sistem Pentanahan
    o    Sistem Pentanahan dan Konstruksinya
    o    Pemeriksaan Kelaikan operasi suatu sistem pentanahan
    o    Praktikum Pemeriksaan Sistem Pentanahan
  6. Sistem pengasutan Motor
    o    Pengenalan Sistem Pengasutan Motor.
    o    Konstruksi dan Sistem Pengawatan Starter.
    o    Pemeriksaan Kelaikan Operasi Sistem Starter.
    o    Praktikum Pemeriksaan Kelaikan Operasi Sistem Starter.
  7. Motor Listrik
    o    Pengertian , Jenis dan Konstruksi Motor Listrik.
    o    Name Plate dan Sistem Terminasi Motor
    o    Pemeriksaan Kelaikan Operasi Suatu Motor Listrik.
    o    Praktikum Pemeriksaan Kelaikan Operasi Suatu Motor Listrik.

INSTRUKTUR    
Tugino ST, MT
Instruktur merupaka praktisi yang telah berpengalaman di bidang Electrical, dan telah berpengalaman dalam menangani permasalahan electrical di berbagai perusahaan, baik swasta maupun BUMN.

PESERTA
Peserta yang diharapkan berpartisipasi dalam program ini antara lain Para Teknisi dibidang Kelistrikan setingkat Supervisor, Foreman.

METODE    
Presentasi, Diskusi, Simulasi, Study kasus, dan Evaluasi

Fasilitas:

  • Training kit
  • Hard and soft copy materi (flashdisk)
  • Sertifikat
  • Souvenir
  • 2x coffee break and lunch
  • Transportasi antar jemput selama training ( bandara / stasiun/ terminal -hotel-tempat pelatihan PP)

Kode :  598009

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Training Electrical Power Analysis Using ETAP

 

Electrical Power Analysis Using ETAP

Tanggal
21-24  Mei 2012
11-14 Juni 2012

Pukul
09.00-16.00 WIB

Tempat
Ibis Hotels / All Seasons Hotels Yogyakarta

DESKRIPSI
Pelatihan ini bertujuan meningkatkan pengetahuan dan wawasan mengenai analisa serta penyetelan proteksi sistem tenaga. Untuk mensimulasikan hasil Analisa digunakan software Aplikasi ETAP. Pelatihan ditekankan pada analisa pada motor-motor listrik, analisa transformator, serta proteksi untuk keduanya . Selain itu juga akan disampaikan tentang Analisa Hubung singkat, Analisa Motor Starting, Analisa Koordinasi Proteksi, Analisa Transien serta Analisa Harmonisa

TUJUAN
Setelah mengikuti pelatihan peserta akan dapat :

  1. Meningkatkan pengetahuan dan wawasan mengenai pemanfaatan ETAP untuk aplikasi di bidang        Electrical Power
  2. Melakukan Analisa Aliran Daya menggunakan ETAP
  3. Melakukan Analisa Motor dan Transformator menggunakan ETAP.
  4. Melakukan Analisa Hubung Singkat menggunakan ETAP
  5. Melakukan Analisa Motor Starting menggunakan ETAP
  6. Melakukan Analisa Koordinasi Proteksi
  7. Melakukan Analisa Transient menggunakan ETAP
  8. Melakukan Studi Harmonisa dan menentukan ukuran Filter

MATERI KURSUS

  • Building One-Line Diagram Using ETAP
  • Load Flow Study Using ETAP
  • Short-Circuit Analysis Using ETAP
  • Motor Acceleration Analysis Using ETAP
  • Protection  Device Coordination Analysis Using ETAP
  • Transient Stability Anaysis Using ETAP
  • Harmonic Analysis Using ETAP

METODE
Presentation, Discussion, Case Study, Evaluation

PESERTA
Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

Investasi
Rp. 5.500.000,- per orang (Non Residential)

FASILITAS
Certificate, Training kit, Module / Handout, Lunch, Coffee Break, Souvenir
Transportasi antar jemput selama training ( bandara / stasiun/ terminal, Hotel-tempat pelatihan PP)

Instruktur Pelatihan
Tugino, ST, MT

Kode : 4333302

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Training : Cable Fault Location For Testing Of Underground Power Cable

 

Training : Cable Fault Location For Testing Of Underground Power Cable

Tanggal  
19-22 Juni 2012

Pukul
09.00 – 16.00 WIB

Tempat
Estubizi Business Center
Setiabudi Building 2 Lantai 1
Jl.HR.Rasuna Said ,Kuningan
Jakarta Selatan

COURSE DESCRIPTIONS :
This training program has been designed to thoroughly instruct personnel in state-of-the-art cable fault locating and cable testing methods. The course uses a combination of classroom
lectures, demonstrations and hands-on field experiments to teach the trainee cable testing and cable fault locating. The course material has been selected to train the fault locator, cable tester or trouble-man to produce results safely, faster and less expensively, with consistently reliable results.

COURSE OBJECTIVE :
The objective of this course is to train utility personnel, fault locators and testers in state-of-the-art cable fault locating and cable testing while keeping additional damage to the good cable system to a minimum.

COURSE TOPICS

  1. Introduction
  2. Safety and Isolation of Supply
  3. Pressure Testing and Faulty Core Identification
  4. Identifying the type of fault
  5. Cable Fault Locating Analysis and Flow Chart
  6. Cable Diagnostics
  7. Using AC and VLF to determine Cable Condition
  8. Tan Delta and Partial Discharge – What they mean for a cable and how to use them to determine a cables condition.
  9. Electrical Testing of Switchgear, Transformers, Motors & Useful Testing and Monitoring Data.
  10. Cable Fault Locating Procedures  and Cable Fault Locating Hints
  11. Frequency of Faults
  12. Cable Fault Locating Methods

Who should attend this course ?
This course is dedicated to: Electrical/Mechanical Maintenance Technician/ Supervisor, Electrical/Mechanical Engineer, or Superintendent.

DELIVERY TYPE :
Lecturing, interactive discussion, and case study.

Instructor :
Miftakhul Hudha, S.T, M.Eng
Senior Praktisi ,Sejak tahun 1999 bekerja di Schneider Electric Mfg, S2 Degree, Electrical Engineering ,  UGM – Yogyakarta
S1 Degree, Electrical Engineering,  ITS – Surabaya

Investasi :
Rp. 5.500.000,- / peserta. Peserta Non-Residential. Sudah termasuk Meeting Package, Training Kits, Modul Pelatihan dan Sertifikat.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

ELECTRIC MAINTENANCE

Jadwal Training

ELECTRIC MAINTENANCE   Tanggal   12-15 Juni 2012 Pukul 09.00 – 16.00 WIB Tempat Estubizi Business Center Setiabudi Building 2 Lantai 1 Jl.HR.Rasuna Said ,Kuningan ... Baca Selengkapnya

ELECTRIC MAINTENANCE

 

ELECTRIC MAINTENANCE  

Tanggal  
12-15 Juni 2012

Pukul
09.00 – 16.00 WIB

Tempat
Estubizi Business Center
Setiabudi Building 2 Lantai 1
Jl.HR.Rasuna Said ,Kuningan
Jakarta Selatan

COURSE DESCRIPTION :
Your facility depends on electrical power to run profitably day in and day out. That’s why it makes sense to test your electrical equipment prior to acceptance, and afterwards to ensure safe, reliable operation.  By performing regular maintenance tests you become aware of the hidden problems in your electrical system before they become disasters. In effect, you may avoid expensive failures and unscheduled outages, and most importantly, personal injury.

COURSE TOPICS :

  1. Introduction to electric maintenance, testing and troubleshooting
    • Why maintain and test
    • Overview of electrical preventive maintenance and testing
    • Planning an EPM program
    • Overview of testing and troubleshooting methods
    • Review of dielectric theory and practice
  2. Electrical safety, switching practices and precautions
    • Introduction
    • Electrical fire emergencies
    • Effects of electrical shock
    • First aid
  3. Direct current voltage testing of electrical equipment
    • Direct current voltage testing of insulation
    • DC testing methods
    • Transformer
    • Cable and accessories
    • Electrical switchgear and circuit breakers
    • Motors and generators
    • Evaluation of test data readings
    • Precautions when making direct current test
  4. Alternating current voltage testing methods
    • Power factor and dissipation factor test methods
    • Description of the power factor test equipment
    • Basic test connections (test modes) for PF testing
    • Safety precautions with PF testing
    • PF testing of electrical apparatus insulation
  5. Maintenance of electrical equipment
    • Preventive maintenance of transformer
    • Transformer testing
    • Maintenance of cables
    • Cable failures and their analysis
    • Electrical switchgear maintenance and care
    • Infrared inspection of electrical equipment
    • Motor and generator maintenance
    • Testing of motor and generator

Who should attend this course?
This course is dedicated to: Production Operator, Maintenance Technician, Instrument Engineer, Process Production Supervisor, Superintendent or Personnel who want to broaden his knowledge about DCS.

DELIVERY TYPE :
Lecturing, interactive discussion, and case study.

Instructor :
Miftakhul Hudha, S.T, M.Eng
Senior Praktisi ,Sejak tahun 1999 bekerja di Schneider Electric Mfg, S2 Degree, Electrical Engineering ,  UGM – Yogyakarta
S1 Degree, Electrical Engineering,  ITS – Surabaya

Investasi :
Rp. 5.500.000,- / peserta. Peserta Non-Residential.
Sudah termasuk Meeting Package, Training Kits, Modul Pelatihan dan Sertifikat.

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Generator Governor Control System

Jadwal Training

Generator Governor Control System Tanggal   24-26 September 2012 Pukul 09.00 – 16.00 WIB Tempat Estubizi Business Center Setiabudi Building 2 Lantai 1 Jl.HR.Rasuna Said ... Baca Selengkapnya

Generator Governor Control System

 

Generator Governor Control System

Tanggal  
24-26 September 2012

Pukul
09.00 – 16.00 WIB

Tempat
Estubizi Business Center
Setiabudi Building 2 Lantai 1
Jl.HR.Rasuna Said ,Kuningan
Jakarta Selatan

OBJECTIVES
The participants will get a basic knowledge of the speed governing system and its context within the safety and control system of the engine.

CONTENT

  1. Sensors/transducer on the engine
  2. Introduction to the engine control philosophy of MAN Diesel & Turbo
  3. Speed governing basics
  4. Knowledge of governor and actuator
  5. Introduction to electronic speed governing systems
  6. Governors and Governing system
  7. Mechanical – Woodward type governor
  8. Electronic – Woodward type governor
  9. Compound Oil Relay
  10. Emergency Trip Mechanism
  11. Troubleshooting and Maintenance
  12. Study Case

Who should attend this course?
This course is dedicated to: Electrical/Mechanical Maintenance Technician/ Supervisor, Electrical/Mechanical Engineer, or Superintendent.

DELIVERY TYPE :
Lecturing, interactive discussion, and case study.

Instructor :
Miftakhul Hudha, S.T, M.Eng
Senior Praktisi ,Sejak tahun 1999 bekerja di Schneider Electric Mfg, S2 Degree, Electrical Engineering ,  UGM – Yogyakarta
S1 Degree, Electrical Engineering,  ITS – Surabaya

Investasi :
Rp. 5.500.000,- / peserta. Peserta Non-Residential. Sudah termasuk Meeting Package, Training Kits, Modul Pelatihan dan Sertifikat.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electrical Circuit Breakres – Maintenance

 

Electrical Circuit Breakres – Maintenance

Tanggal
28– 31 Mei 2012

Pukul
08.00 – 16.00 WIB

Tempat
Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

DESKRIPSI PELATIHAN
This electrical circuit breakers-maintenance training course will discuss application, installation, maintenance and testing issues related to low-, medium- and high-voltage switchgear and electrical circuit breakers. The course will provide the delegates with a solid understanding of switchgear theory and standards. The course will also make delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment with a strong emphasis on safety. The course will cover a wide range of material starting from the basics and moving on to more complex issues.

This course provides an overview of power system design and theory, focusing on the power distribution electrical circuit breakers used in common utility, industrial, commerical and institutional applications. Basic electrical circuit breaker construction, electrical safety, and common circuit breaker maintenance techniques are the major components of this course.
When brought on-site, this course can be supplemented by an in-depth study of the specific circuit breaker models used at the client’s facility. Hands-on training is provided wherever practical.

PESERTA PELATIHAN
This course is recommended for skilled trades, supervisors, and anyone involved in the maintenance of industrial power circuit breakers.

TUJUAN PELATIHAN
This course is designed to enable participants to:

  • List the voltage convention classifications used in this course.
  • Describe switchgear construction.
  • Describe a ground fault relay system.
  • Describe the three basic types of low and medium voltage circuit breaker contacts.
  • Describe the molded case circuit breaker

MATERI PELATIHAN

  1. Low Voltage Switchgear, Theory and Applications
    Establishing a solid understanding of electrical switchgear design and operation is vital to its safe and reliable application. This course provides valuable technical information on low voltage circuit breakers and switchgear used in common industrial, commercial and utility applications.

    • General Introduction
    • The Spectrum of Switchgear
    • Standards-Standards Organizations, Certification Marks and Applicable Standards
    • Switchgear Drawings
    • Switchgear Ratings
    • Difference Between Switchgear & Switchboards
    • Switchgear Factory Testing
    • Short Circuit Current Estimation
    • Ground Fault Protection
    • Modern LV Switchgear-Design Features and Benefits
    • Modern LV Power Circuit Breakers
    • Modern LV Trip Units
    • Wrap-up, Final Questions
  2. 4160 Volt Breaker Overview
    • Purpose/application
    • Circuit breaker construction
    • Circuit breaker operation
    • Circuit breaker control
    • Personnel and equipment safety factors
  3. 4160 Volt Breaker Maintenance
    • General breaker maintenance
    • Adjustment
    • Inspection and testing
    • Maintenance intervals
    • Troubleshooting and repair
  4. Low-Voltage Breaker Overview
    • Purpose and application
    • Circuit breaker construction
    • Circuit breaker operation
    • Circuit breaker control
    • Personnel and equipment safety
  5.  Low-Voltage Breaker Maintenance
    • Inspection and testing
    • Adjustments
    • Troubleshooting and repair
  6. Switchgear Overview
    • System overview and interactions
    • Switchgear components
    • Power buses
    • Safety
  7.  Grounding
    • Principles of grounding
    • Grounding procedures
    • Ground and test device
  8. Switchgear Maintenance
    • Operation of switchgear devices
    • Preventive maintenance
    • Testing
    • Corrective maintenance

INSTRUKTUR
Ir. Teguh Santoso  (Prakstisi di bidang pembangkitan dan telah berpengalaman dalam berbagai kegiatan training, inspeksi dan konsultasi untuk pembangkit listrik)

Biaya kursus
Rp. 5.500.000,- per peserta (Non Residential)
Rp. 5.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Kode : 129302

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electrical Power Distributed Control System

 

Tanggal
11-14 Agustus 2009

Jam Pelaksanaan
08.30-17.00 WIB

Tempat
Jayakarta Hotel
Bandung

Pembicara / Fasilitator
DR. Ir. Endra Joelianto

Harga
Rp.6.950.000,-
per participant, excluding accommodation & tax.

BACKGROUND
Distributed Control Systems (DCS) made its first entry in the seventies. Cheap microprocessors made the possibility to distribute control systems across the entire plant. Each controller control a limited part of the plant and each controller communicate to each other using a proprietary communication protocol. This is of course making the system becomes more configurable. DCS uses pre-programmed modules which are available to execute simple and more complex process control tasks. During the years that followed, DCS systems were used throughout the most diverse process industries in both continuous and batch applications. DCS applications in these different control environments made them increasingly mature, hundreds of configurable modules for every possible control problem were developed and stored in the system library. Using DCS, process controllers were able to handle tens, hundreds even thousand of control loops without jeopardizing the reliability of the complete control systems.
This training program is intended to give participants know-how on DCS systems. Moreover, the training will cover an introduction to FIELDBUS. In this program, participants will also know how different DCS with PLC.

Provides view to general questions toward Distributed Control System (DCS), such as: How and why DCS evolved? What hardware is used in DCS? And Many more. Compares distributed control to traditional single loop, central computer, PLC and PC architectures.

OBJECTIVE: YOU WILL BE ABLE TO

  • Understand the concept of DCS
  • Explain the components, architectures, operation of DCS and hardware in DCS
  • Apply concepts body/mind reaction to audio and visuals symbols to meaningful human machine interfaces
  • Evaluate and justify potential benefits of DCS to improve productivity
  • Examine evolution of process control to face changing needs

COURSE OUTLINE

  1. Understanding of Distributed Computing
  2. Comparison of Current System Philosophies
  3. Controller Structure
  4. Sequential and Batch Control
  5. Operator Interface
  6. Alarms and Trending
  7. Communication Networks and Field-bus
  8. Control Strategy and Configuration
  9. System Security
  10. Implementation for Industrial Control

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE
Examine structure of DCS
Practical work using DCS
Simulation using Software

COURSE INFORMATION
Class and Lab. Work

TARGETED PARTICIPANTS
Operator, Technician, Maintenance, Engineers dealt with industrial process control and automation.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Variable Speed Drives (VSD)

Jadwal Training

Variable Speed Drives (VSD) Tanggal 21– 24 Mei 2012 Pukul 09.00-17.00 WIB Tempat Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ Grand Palace ) DESKRIPSI ... Baca Selengkapnya

Variable Speed Drives (VSD)

 

Variable Speed Drives (VSD)

Tanggal
21– 24 Mei 2012

Pukul
09.00-17.00 WIB

Tempat
Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ Grand Palace )

DESKRIPSI
Penggerak di industri merupakan tulang punggung industri. Kemajuan teknologi, elektronika sangat menguntungkan industri. Mesin-mesin industri seperti mesin AC dan DC yang tadinya digerakkan secara konvensional menjadi luwes karena variasi speed dan torsi dapat disesuaikan dengan kebutuhan. System elektronis juga memperbaiki proses kontrol system penggerak. Di dalam operasi industri diperlukan pengendalian kecepatan motor rotating equipment agar didapatkan suatu hasil produk yang memiliki daya saing yang tinggi. Untuk itu bagi tenaga yang menangani bidang tersebut memerlukan pemahaman tentang Variable Speed Drives (VSD) yang merupakan peralatan pengendalian kecepatan motor rotating equipment agar dapat melaksanakan operasi dengan baik serta mampu merawat peralatan dengan benar. Setelah mengikuti kursus ini, diharapkan peserta dapat memahami cara kerja pengaturan kecepatan motor dan cara pemeliharaanya.

MATERI

  1. Dasar-dasar mesin listrik : filosofi dan system kelistrikan
  2. Elektronika daya : komponen, system rectifier, inverter, chopper dan filter
  3. Ragam rectifier, inverter dan chopper : desain dan implementasi
  4. Model control variable speed : phase control, PWM, Chopper.
  5. Beberapa merek AC drive/DC drive : rectifier, mentor drive, simovert` dll.
  6. Trouble shooting
  7. Work Lab on class

INSTRUKTUR PELATIHAN
Ir. Teguh Santoso (Pakar dan Praktisi di bidang Instrumentasi dan Kendali)

PESERTA
Operator, teknisi, engineer, dan pegawai terkait yang membutuhkan hal tersebut.

METODE
Presentation
Discuss
Case Study
Evaluation
Simulation

Investasi
Rp. 5.500.000,- per peserta (Non Residential)
Rp. 5.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

FACILITIES
Module/Handout
Sertificate
Souvenirs
Training Kit

Kode : 138839

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Generator : Operation, Maintenance and Trouble Shooting

 

Generator : Operation, Maintenance and Trouble Shooting

Tanggal
24-27 September 2012

Pukul
08.00 – 16.00 WIB

Tempat
Hotel Jambu Luwuk, Yogyakarta

Deskripsi
Generator adalah peralatan utama pada unit pembangkit yang berfungsi menghasilkan energi listrik. Unjuk kerja generator selain dipengaruhi oleh aspek operasinya sangat dipengaruhi oleh faktor pemeliharaannya. Kesalahan dalam melakukan pemeliharaan akan menyebabkan gangguan vibrasi dan menurunnya kemampuan sehingga kinerja unit turun. Untuk mengatasi masalah tersebut perlu SDM yang kompeten, pelatihan ini dapat memberikan solusi  terhadap masalah pemeliharaan generator di unit pembangkit.

Training ini dimaksudkan untuk meningkatkan pengetahuan dan wawasan tentang aspek-aspek engineering pada sistem pembangkitan Tenaga Listrik. Topik training ditekankan pada operasi, proteksi dan pemeliharaan generator maupun sistem penggerak mulanya.

TRAINING MATERIAL OUTLINE/CAKUPAN MATERI TRAINING

  • Prinsip dasar generator
  • Distribusi fluks pada sela udara
  • Ggl tanpa beban
  • Belitan stator/rotor
  • Isolasi dan kenaikan temperatur
  • Reaksi jangkar
  • Reaktansi
    • Gas turbine engines
      • Gas turbine engine classifications,
      • Principles of operation ,
      • fuel system ,
      • Cooling system,
      • Lubrication system,
      • Starting system
    • Governor
      • System and Component,
      • Governing Fundamentals,
      • Principle of Operation
    • Prime Movers Maintenance
    • Electrical Power Generator
      • Construction,
      • Principles of operation,
      • Generator Characteristics
    • Excitation system
      • Types of exciters,
      • Characteristics of exciters,
      • o Field flashing,
      • o AVR system
    • Generator Operation
      • Synchronizing to Busbar,
      • Loading,
      • Generator protection
    • Insulation Testing
      • Factors Affecting Insulations,
      • Resistance Testing,
      • Power Factor Testing,
      • High Potential Testing,
      • Withstand  Voltage Testing
    • Generator Testing and Maintenance
      • Stator and Rotor Insulation Test,
      • Stator winding Test,
      • Rotor Voltage Test,
      • Data Interpretation
    • Discussion and cases study

 

Peserta
Kursus ini dapat diikuti oleh teknisi, engineer, supervisor yang bekerja pada bidang maintenance dan operation Generator untuk berbagai macam industri.

Instruktur
Ir. Teguh Santosa
(Pakar dan Praktisi di bidang Generator Listrik)

Biaya kursus:
Rp. 6.500.000,- per orang (Non Residential)
Rp. 6.000.000,- per peserta ( Pendaftaran 3 peserta dari 1 perusahaan)

Kode : 177602

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Motor Control and Protection

Jadwal Training

Tanggal 3-7 Agustus 2009 Jam Pelaksanaan 08.00-17.00 WIB Tempat Jayakarta Hotel Bandung Pembicara / Fasilitator Ir. Agung Sarwono Harga Rp.7.250.000,- Per participant, excluding accommodation & ... Baca Selengkapnya

Motor Control and Protection

 

Tanggal
3-7 Agustus 2009

Jam Pelaksanaan
08.00-17.00 WIB

Tempat
Jayakarta Hotel
Bandung

Pembicara / Fasilitator
Ir. Agung Sarwono

Harga
Rp.7.250.000,-
Per participant, excluding accommodation & tax.

INTRODUCTION
These forums are designed to educate industrial, commercial and institutional motor users about the many savings to be gained from optimum motor protection, control.

Delegates will have an excellent opportunity to ask specific questions and exchange ideas relating to their own unique situations. These forums are designed to be an interactive, problem-solving, learning environment for delegates of all disciplines.

COURSE OUTLINE

  1. Introduction
  2. Type & Construction of Motor Induction
  3. Basic Theory of Motor Induction
  4. Motor Induction Application
  5. Start System
  6. Generator-set as power
  7. Motor Protection
  8. Circle Control
  9. Type of damaged could be happen
  10. Kinds of Inspection


RECOMMENDED PARTICIPANT

  • Engineering and design personnel
  • Process and operations personnel
  • Technical and process managers
  • Engineering and design personnel
  • Electrical consulting engineers
  • Electrical contractors

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

2024

informasi-seminar.com | infoseminar.co.id