Jadwal Training 2024

Rekayasa Elektro Hidrolik And Aplikasi (BANDUNG)

 

Rekayasa Elektro Hidrolik And Aplikasi (BANDUNG)

Tanggal

  • 27 Aug 2018-30 Aug 2018
  • 17 Sep 2018-20 Sep 2018
  • 02 Oct 2018-05 Oct 2018
  • 19 Nov 2018-22 Nov 2018
  • 17 Dec 2018-20 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TUJUAN TRAINING :
Memberikan suatu wawasan industri yang berkenaan dengan rekayasa elektro hidrolik beserta penerapannya di industri.

CAKUPAN MATERI TRAINING :

  1. Prinsip dasar elektro hidrolik : keuntungan dan aplikasi elektro hidrolik disain sistem elektro hidrolik
  2. Simbol komponen dan gambar rangkain, penyediaan dan pengalihan (transfer) energi
  3. Pengontrolan gerakan silinder
  4. Kontrol elektro hidrolik gerakan berurutan (sequential)
  5. Praktek laboratorium
  6. Diskusi

HARGA INVESTASI/PESERTA :

  1. Rp 7.950.000/peserta (bayar penuh)  atau
  2. Rp 7.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp 7.500.000/peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. Aris Suryadi, MT adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electro Pneumatics System : Principles And Application (Bandung)

 

Electro Pneumatics System : Principles And Application (Bandung)

Tanggal

  • 24 Sep 2018-27 Sep 2018
  • 22 Oct 2018-25 Oct 2018
  • 26 Nov 2018-29 Nov 2018
  • 10 Dec 2018-13 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TUJUAN TRAINING :
Memberikan suatu wawasan industri dalam merancang kontrol elektro-pneumatik yaitu penggabungan keuntungan pneumatik sebagai aktuator dan listrik sebagai pengontrol dalam penerapannya di industri. Memberikan suatu wawasan industri dan kemampuan untuk merancang kontrol elektro-pneumatik dan fungsi-fungsi khusus untuk mengatasi kontrol kerja yang kompleks dalam penerapan industri.

CAKUPAN MATERI TRAINING :

  1. Pembukaan dan Pre Test
  2. Review Pneumatik
    • Power supply Pneumatik
    • Sistem kontrol Pneumatik 1 (Aliran & arah)
    • Sistem kontrol Pneumatik 2 (Tekanan)
    • Aktuator Pneumatik
  3. Review Kontrol Elektrik
    • Input – output Kontrol Elektrik
    • Sensor
    • Kontrol Elektrik (Electrical Control)
    • Pewaktu (Timer), Pencacah (Counter)
  4. Logik dasar
    • Aljabar Boolean
    • ADC, DAC, Enkoder dan Dekoder
  5. Metode pengontrolan gerakan 1 (Sequential)
    • Metode Intuitif
    • Metode Set-Reset
    • Metode Latching
  6. Metode pengontrolan gerakan 2 (Conditional)
    • Metode Logik
  7. Kontrol Panel
  8. Contoh penerapan (Menggunakan Simulator)
    • Pemposisi benda kerja
    • Feeder Station
    • Penggetar keranjang cat
    • Pencekam cangkang kamera
    • Drilling station
    • Stasion pengecatan
  9. Latihan Penerapan (Praktek) 1
  10. Latihan Penerapan (Praktek) 2
  11. Perawatan dan Trouble shooting
  12. Post Test dan Penutupan

TRAINING DURATION :
4 days

HARGA INVESTASI/PESERTA :

  1. Rp 7.950.000/peserta (bayar penuh)  atau
  2. Rp 7.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp 7.500.000/peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Training CD contains training material
  3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by PT.MMS team / instructor
  4. Certificate
  5. Stationeries: NoteBook and Ballpoint
  6. Jacket or waistcoat or T-Shirt
  7. Bag or backpackers
  8. Training Photo
  9. Training room with full AC facilities and multimedia
  10. Once lunch and twice coffeebreak every day of training
  11. Qualified instructor
  12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. Aris Suryadi, MT adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Performance Analisys And Maintenance Of Electrical Distribution Networks For Supervisor (BANDUNG)

 

Performance Analisys And Maintenance Of Electrical Distribution Networks For Supervisor (BANDUNG)

Tanggal

  • 10 Sep 2018-13 Sep 2018
  • 08 Oct 2018-11 Oct 2018
  • 12 Nov 2018-15 Nov 2018
  • 10 Dec 2018-13 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION:
This training will be presented for the supervisors or those who handle of electrical distribution networks in industries or mining. Therefore, the reliability of performance for the distribution network will ensure a secure energy supply lasted for 24 hours per day. So the condition of the performance of the distribution network must be analyzed and maintained with routine and programmed. During the training, presentation of the materials will be presented in a comprehensive manner, through the method of presentation of these things easily lead to a more complex, and practically based to a critical analysis.

TRAINING OBJECTIVES:
After completing this training, at the end of the activities you will be able to explain clearly about the analysis, performance, maintenance of the electrical distribution networks in the industry.

TRAINING MATERIAL OUTLINE:

  1. Overview for supplying of the electrical energy in the process of production activities in industries
  2. Performance analysis of Network circuit
  3. Performance analysis of transformer distribution
  4. Testing and setting of protection devices
  5. Inspection of network installation condition
  6. Preventive maintenance for termination
  7. Performance and preventive maintenance of switchboards

TRAINING METHOD:

  1. Question – answer
  2. Discussion
  3. Adult education
  4. Presentation is associated with the experience of participants

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Brayan Munthe was born in May 26th 1954. He got his education from electrical engineering IKIP Padang, then diploma of technical teacher training Hawthorn Institute of Education, Melbourne, and his master program from electrical engineering universitas gadjah mada, UGM Yogyakarta. He has followed many courses in Indonesia and also abroad to improve his capabilities. He is lecturer at politeknik TEDC and also at electrical department technical education development center Bandung. He has field experiences because he has done some projects in some companies in Indonesia related to his competencies.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Instrumentation And Basic Control System (BANDUNG)

 

Instrumentation And Basic Control System (BANDUNG)

PENDAHULUAN TRAINING:
Sistem pengukuran merupakan bagian dari teknik instrumentasi, karena itu ada baiknya untuk memulai pembahasan sebagai pengertian dasar teknik instrumentasi. Teknik instrumentasi adalah seni dan ilmu yang mempelajari sifat-sifat benda dan hukum-hukum alam yang dapat dimanfaatkan bagi kepentingan manusia melalui pengukuran, pengamatan, dan pengendalian proses fisik.

Sistem kontrol adalah sistem dinamik yang dapat menggunakan komponen mekanik, listrik, hidrolik, pneumatik. Teknik pengaturan dapat dilakukan dengan sistem operasi satu arah yang berurutan, maupun pengaturan umpan balik dengan parameter yang diatur dibandingkan dengan parameter masukan dan kesalahan yang ada digunakan untuk menurunkan kesalahan itu sendiri.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi dalam bidang instrumentasi dan sistem Kontrol.

SASARAN PESERTATRAINING:

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang sistem instrumenatsi dan kontrol pada industri rekayasa.

OUPUT TRAINING:
Pemahaman tentang konsep pengukuran, alat ukur dan mampu mempraktekkan alat-alat ukur yang dipergunakan dalam proses industri sebagai sistem instrumentasi dan hubungannya pada pengendalian proses

CAKUPAN MATERI TRAINING :

  1. This course deals with measurement techniques ranging from the basic principles, sensors, up until data acquisition.
  2. Sensing element, convertion element, Tranduser, signal conditioner, transmitter
  3. Analog signal, digital signal, ADC & DAC, encoder & decoder
  4. Coverage includes definition/terminologies, calibration, standards, static and dynamic signal analysis, digital data acquisition, dynamic response of instruments, step response of first and second order systems, statistical analysis, measurements of temperature, strain, flow, pressure, velocity, and displacement.
  5. Electrical actuators, Hydraulic & pneumatic actuators.
  6. This class discusses the basic of control theory and its applications.
  7. The syllabus includes examples of control application in our daily life and in the industry, on-of controller, proportional control, PID controller
  8. Considerations in implementing control, components of automatic control systems: actuators, sensors, analogy control systems

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

INSTRUCTOR :   Ir. Aris Suryadi, MT. and Team

TRAINING DURATION :   3 days

TRAINING TIME :
06 Aug 2018-08 Aug 2018
03 Sep 2018-05 Sep 2018
15 Oct 2018-17 Oct 2018
05 Nov 2018-07 Nov 2018
26 Dec 2018-28 Dec 2018

INVESTMENT PRICE/PERSON:

  1. Rp 5.950.000/person (full fare) or
  2. Rp 5.750.000/person (early bird, payment 1 week before training) or
  3. Rp 5.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flashdisk Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. Aris Suryadi, MT adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Implementasi DSP (Digital Signal Processing) Dalam Sistem Komunikasi (BANDUNG)

 

Implementasi DSP (Digital Signal Processing) Dalam Sistem Komunikasi (BANDUNG)

WAKTU TRAINING :

  • 13 Aug 2018-16 Aug 2018
  • 10 Sep 2018-13 Sep 2018
  • 22 Oct 2018-25 Oct 2018
  • 12 Nov 2018-15 Nov 2018
  • 10 Dec 2018-13 Dec 2018

TEMPAT TRAINING :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

DURASI TRAINING :   4 hari

CAKUPAN MATERI TRAINING:

  1. Introducing Digital Signal Processing
    • Pengenalan Pengolahan Sinyal Digital dan aplikasinya
    • Sinyal dan Sistem
    • Sampling dan Rekonstruksi
    • Sistem Waktu Diskrit dan Kontinyu
    • Deret Fourier
    • Transformasi Fourier
    • Transformasi Fourier Diskrit
    • Transformasi Z
  2. Filter Design for Communications
    • Pengenalan Filter
    • Filter Analog dan Digital
    • Desain Filter Analog Iinfinite Iimpuls Response ( IIR ) dan Finite Iimpuls Response ( FIR )
    • Desain Filter Analog dan Digital
  3. Digital Image Processing
    • Dasar Pengolahan Citra
    • Transformasi Citra
    • Image Enhancement
    • Analisis Citra
    • Kompresi Data Citra dan Pengenalan Pola
  4. Real – Time Digital Signal Processing with Digital Signal Processing Starter Kit ( DSK )
    • Simulasi DSP dengan Code Composer Studio ( CCS )
    • Implementasi DSK  TMS320C50xx
    • Simulasi dan Implementasi Digital Signal Processing menggunakan Digital Signal Processing Starter Kit ( DSK ) TMS320C50xx
  5. Diskusi interaktif
  6. Komposisi materi: Praktek 50% dan teori 50%

INVESTATION PRICE/PERSON :    

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

INSTRUKTUR TRAINING
Arsyad Ramadhan Darlis, ST.,MT. lulusan dari jurusan Teknik Elektro Konsentrasi Teknik Telekomunikasi  Institut Teknologi Bandung ( ITB ). Sekarang Beliau dosen di Teknik Elektro Institut Teknologi Nasional (Itenas) Bandung. Selain pendidikan formal, untuk meningkatkan kompetensinya, Beliau sering mengikuti pelatihan-pelatihan terkait kompetensi dan juga terkait posisinya sebagai seorang dosen. Di Pelatihan Beliau disampaikan bagian teori dan praktek secara berimbang sehingga peserta bisa lebih memahami topik yang sedang dibahas.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Basic Electrical (BANDUNG)

Jadwal Training

Basic Electrical (BANDUNG) Tanggal 14 Jan 2019-16 Jan 2019 06 Feb 2019-08 Feb 2019 11 Mar 2019-13 Mar 2019 08 Apr 2019-10 Apr 2019 27 ... Baca Selengkapnya

Basic Electrical (BANDUNG)

 

Basic Electrical (BANDUNG)

Tanggal

  • 14 Jan 2019-16 Jan 2019
  • 06 Feb 2019-08 Feb 2019
  • 11 Mar 2019-13 Mar 2019
  • 08 Apr 2019-10 Apr 2019
  • 27 Mei 2019-29 Mei 2019
  • 24 Jun 2019-26 Jun 2019
  • 15 Jul 2019-17 Jul 2019
  • 12 Agust 2019-14 Agust 2019
  • 09 Sep 2019-11 Sep 2019
  • 14 Okt 2019-16 Okt 2019
  • 11 Nop 2019-13 Nop 2019
  • 16 Des 2019-18 Des 2019

Pukul
09.00-16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TUJUAN TRAINING :
Pelatihan ini dimaksudkan untuk meningkatkan pengetahuan dan wawasan tentang dasar-dasar kelistrikan dan pemeliharaan utilitas listrik di industri. Topik pelatihan ditekankan instalasi, trouble shooting dan pemeliharaan utilitas.

CAKUPAN MATERI TRAINING :
1. Basic Electricity

  • Electric quantities
  • Ohm’s Law
  • Kirchoff’s Law

2. AC Voltage Generation

  • Induced AC Voltage
  • rotating magnetic field
  • frequency
  • voltage and current sine wave
  • peak value
  • RMS value

3. Properties of AC Circuits

  • Resistive
  • Inductive and capasitive loads
  • phasor diagram

4. Impedance and Voltage Drop

  • Voltage drop across individual elements
  • Impedance triangle
  • voltage drop across line

5. Power and Power Factor

  • Energy and active power
  • reactive power
  • apparent power
  • power factor
  • power triangle

6. Power Factor Correction

  • Individual and group PFC

7. Three Phase Power Systems

  • Three phase generation,common neutral
  • Balanced three phase load, three phase equipment
  • Characteristics of Y/D connections, Three-phase power

8. Electrical machines

  • DC-Machines
  • AC-Machines

9. Motor Installation

  • installation & wiring of contactors
  • Types of motor starters
  • Motor & circuit protection

10. Mechanical-Electrical Rotating Equipment Maintenance

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Pelatihan ini diberikan pada para teknisi, operator maupun supervisor yang bekerja dibidang ketenaga listrikan di industri untuk mampu memahami secara komprehensif masalah ketenagalistrikan, instalasi dan pemeliharaan utilitas.

INVESTATION PRICE/PERSON :

  1. Rp 5.950.000/person (full fare)  or
  2. Rp 5.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 5.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

Trainer
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN) and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences and now he is ready to share his knowledge and experiences to industrial world throught training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electrical Power System Analysis (BANDUNG)

 

Electrical Power System Analysis (BANDUNG)

Tanggal

  • 25 Sep 2017-28 Sep 2017
  • 23 Oct 2017-26 Oct 2017
  • 31 Oct 2017-03 Nov 2017
  • 12 Dec 2017-15 Dec 2017

Tempat
Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

TRAINING DURATION :   4 days

TRAINING OBJECTIVE :
The purpose of this training is to develop a thorough understanding of power system analysis and design as well as the overall capabilities of Power Station. Class room discussion and problem-solving has been designed to provide the analytical techniques necessary to solve a wide variety of practical problem encountered at field. In this training, participants will :

  1. Learn and get better understanding of electric power system operation and condition
  2. Learn and better understanding the types of electric power configuration
  3. Be able to calculate basic calculation of electric power system
  4. Be able to analyze disturbance
  5. Learn and better understanding of monitoring system and control
  6. Learn and better understanding effect of load in power system

TRAINING MATERIAL OUTLINE :

  1. Electric power grid representation and characteristic
  2. Type of electric power system configuration
  3. Basic calculation in normal condition
  4. Load shedding system and load analysis
  5. Basic calculation in disturbance condition and disturbance analysis
  6. Electrical Power System Monitoring Equipment
  7. Interactive discussion and cases study

WHO SHOULD ATTEND THIS TRAINING ?

  • Electric Engineer/Supervisor/Superintendent
  • Power Plant Maintenance Engineer/Supervisor/Superintendent
  • Power Plant Operation Engineer/ Supervisor/ Superintendent
  • Everyone  who wants to broaden knowledge on this topics

INVESTATION PRICE/ PERSON :

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  • Modul Training
  • Flashdisk Training berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon, PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Generator Excitation System (BANDUNG)

Jadwal Training

Generator Excitation System (BANDUNG)  TRAINING MATERIAL OUTLINE : 1.    Introduction to Synchronous Generators a.    What is a synchronous generator? b.    Basic synchronous genartor theory c.   ... Baca Selengkapnya

Generator Excitation System (BANDUNG)

 

Generator Excitation System (BANDUNG)

 TRAINING MATERIAL OUTLINE :
1.    Introduction to Synchronous Generators
a.    What is a synchronous generator?
b.    Basic synchronous genartor theory
c.    The componen parts of a synchronous generator
d.    Synchronous generator examples

2.    Introduction to Excitation Systems:
a.    What is an Excitation System?
b.    Basic Excitation Theory
c.    Why do we need one?
d.    Excitation system examples

3.    Brushless / rotating excitation systems
a.    What is brushless excitation ?
b.    Brushless and rotating – what’s the difference?
c.    Advantages and disadvantages
d.    Case studies

4.    Static Excitation System
a.    What is Static Excitation ?
b.    Advantages and disadvantages
c.    Case studies

5.    The Capability Diagram (Operating Chart)
a.    What does the capability diagram tell us?
b.    Different types of Diagram
c.    The under Excitation limiter
d.    The over Excitation limiter
e.    Case Studies

6.    Excitation System Components
a.    The PMG / HFA
b.    The Exciter
c.    The Reciter
d.    The Static rectifier
e.    The excitation transformer
f.    AVR Output Stages
g.    Component Examples

7.    Closed Loop Control Theory
a.    Genarator Voltage Control
b.    Field Current control
c.    The Tansfer Function Diagram

8.    Parallel Operation of Generators
a.    Problems With Parallel Operation
b.    Droop (Compounding) AVR Control
c.    Reactive Load Sharing
d.    Power Factor Control
e.    Mvar Control
f.    Power Syste, Stabilisers

9.    Commissioning Operation and Maintenance
a.    Excitation System Commissioning
b.    What happens When it Goes Wrong
c.    Transmission Company Compliance
d.    Troubleshooting
e.    Preventive Maintenance
f.    Excitation Performance Evaluation

10.     Excitation System Standards
IEEE std 421.2 – Guide for Identification, Testing, and Evaluation of the Dynamic

11.     Performance of Excitation Control System
IEEE Std 421.5 – Recommended Practice For Excitation System Models

INSTRUCTOR :   Ir. Hasan Surya, MT. and Team

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION : 4 days

TRAINING TIME :

  • 22 Aug 2017-25 Aug 2017
  • 05 Sep 2017-08 Sep 2017
  • 03 Oct 2017-06 Oct 2017
  • 06 Nov 2017-09 Nov 2017
  • 19 Dec 2017-22 Dec 2017

INVESTMENT PRICE/PERSON:

  1. Rp 7.950.000/person (full fare) or
  2. Rp 7.750.000/person (early bird, payment 1 week before training) or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN) and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Performance Analisys And Operating Of Generator Set For Senior Operator And Engineer (BANDUNG)

 

Performance Analisys And Operating Of Generator Set For Senior Operator And Engineer (BANDUNG)

Tanggal  

  • 27 Nov 2017-30 Nov 2017
  • 19 Dec 2017-22 Dec 2017
  • 15 Jan 2018-18 Jan 2018
  • 19 Feb 2018-22 Feb 2018
  • 19 Mar 2018-22 Mar 2018
  • 16 Apr 2018-19 Apr 2018
  • 28 May 2018-31 May 2018
  • 05 Jun 2018-08 Jun 2018
  • 16 Jul 2018-19 Jul 2018
  • 13 Aug 2018-16 Aug 2018
  • 17 Sep 2018-20 Sep 2018
  • 15 Oct 2018-18 Oct 2018
  • 19 Nov 2018-22 Nov 2018
  • 18 Dec 2018-21 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION:
This training will be presented for the senior operator or junior supervisor or engineer  or those who handle of electrical power generating in industries or mining. It is known that the electrical energy required by industries supplied from outside by PLN in Indonesia. But the electric energy industry required for 24 hours a day is not guaranteed to be supplied by PLN. Therefore, every industry is requiring a backup generator, called the stand-by generator. Where there are some industries or mines have themselves generators to produce electrical energy to be consumed by themselves. So the condition of the performance of the power generator must be analyzed and how the operation of the generator is properly and efficiently to serve the production process. During the training, presentation of the materials will be presented in a comprehensive manner, through the method of presentation of these things easily lead to a more complex, and practically based to a critical analysis.

TRAINING OBJECTIVES:
After completing this training, at the end of the activities you will be able to explain clearly about the analysis, performance, operation of the electrical generator in the industry.

TRAINING MATERIAL OUTLINE:
1.    Function of generator parts
2.    Electromotive force voltage
3.    Characteristics of no load
4.    Characteristics of short circuit
5.    Characteristics of loading and efficiency
6.    Excitation systems
7.    Voltage regulation and its controls
8.    Generator protection
9.    Parallel of generator
10.    Load sharing and the V of the generator
11.    Hybrid generation

TRAINING METHOD:
1. Question – answer
2. discussion
3. Adult education.
4. Presentation is associated with the experience of participants

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Brayan Munthe was born in May 26th 1954. He got his education from electrical engineering IKIP Padang, then diploma of technical teacher training Hawthorn Institute of Education, Melbourne, and his master program from electrical engineering universitas gadjah mada, UGM Yogyakarta. He has followed many courses in Indonesia and also abroad to improve his capabilities. He is lecturer at politeknik TEDC and also at electrical department technical education development center Bandung. He has field experiences because he has done some projects in some companies in Indonesia related to his competencies.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Design Of Heating, Ventilation And Air Conditioning System (BANDUNG)

 

Design Of Heating, Ventilation And Air Conditioning System (BANDUNG)

Tanggal

  • 21 Aug 2017-25 Aug 2017
  • 04 Sep 2017-08 Sep 2017
  • 02 Oct 2017-06 Oct 2017
  • 30 Oct 2017-03 Nov 2017
  • 04 Dec 2017-08 Dec 2017

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   5 days

ABOUT THIS COURSE:
Heating, Ventilation, and Air-Conditioning (HVAC) Systems cover treatment of air providing for a conditioning space depending on the purpose. Their system designs cover the fundamentals and practical applications for understanding and designing systems of all HVAC systems. The comprehensive coverage of the basic theory, latest terminology, system analysis, optimization concept, and calculation methods to make this the most complete course available today in achieving an economical system.

THIS COURSE OFFERS:
Basics of HVAC to give comprehensively understanding in reducing energy cost. Project exercises are included in this course to give completely engineering economical senses.

BENEFITS:

  • Enable to analyze and recommend the most effective solution available in Mechanical System Design for Building.
  • Enable to utilize energy as possible as saving
  • Familiar and better understanding of all aspects relating to efficient HVAC system in building.

WHO SHOULD ATTEND THIS TRAINING?:
a. Technicians
b. ME engineers
c. Architects
d. And other who responsible for selecting, design mechanical equipments for building

TRAINING MATERIAL OUTLINE :
1. Heat and Air Treatment
a. Basics of Heat and Measurement
b. Thermodynamic Properties
c. Thermodynamic Process
d. Mass Conservation
e. Energy Conservation
f. Psychrometrics
g. Evaporative Cooling
h. Sensible Cooling
i. Latent Cooling
j. Heating Process
k. Heat and Mass Balance
l. Unit of Refrigeration
m. Unit Systems and Conversion

2. Refrigerant and Environment
a. Global Issues in Environment
b. Montreal Protokol
c. Kyoto Protokol
d. Halocarbon Compounds
e. Inorganic Compounds
f. Hydrocarbons
g. Azeotropes
h. Naming Rule for Refrigerants
i. Refrigerant Requirements and Desirable Qualities
j. Basis of Choice of Refrigerant
k. Secondary Refrigerant

3. Refrigeration Systems
a. Vapor Compression Cycle
b. Vapor Absorption Cycle
c. Evaporative Cooling
d. Cooling Tower
e. Storage System

4. Cooling Load Estimation
a. Health and Comfort Criteria
b. Thermal Comfort
c. Air Quality
d. Weather Data
e. Design Condition
f. Internal Load
g. External Load
h. Load Estimation Methods
i. CLTD, CLF, SCL

5. Thermal and Water Vapor Transmission
a. Building Envelope
b. Overall Thermal Resistance
c. Wood Frame Waals
d. Mansory Wall
e. Ceiling
f. Roof
g. Door
h. Window

6. Ventilation and Infiltration
a. Types of Air Exchange
b. Ventilation and Thermal Load
c. Ventilation and Indoor Air Quality
d. Driving Mechanism
e. Airflow Through Openings
f. Natural Ventilation Flow Rates
g. Infiltration
h. Air Leakage
i. Calculation Air Exchange

7. Fenestration
a. Cooling Load through Glass
b. Energy Flow
c. Air Movement
d. Shading
e. Daylighting from Fenestration

8. Air-Conditioning Systems
a. Thermal Distribution System
b. Classic Single-Zone System
c. Outdoor-Air Control
d. Single-Zone Systems
e. Mutiple-Zone Systems
f. Therminal Reheat Systems
g. Dual-Duct or Multizone System
h. Water Systems
i. Unitary Systems

9. Fan and Duct System
a. Basic of Fluid Mechanics
b. Conveying Air
c. Pressure Drop in Duct
d. Design of Duct System
e. Velocity Method
f. Equal-Friction Method
g. Optimization of Duct Systems
h. System Balancing
i. Centrifugal Fans and Their Characteristics
j. Fan Laws
k. Air Distribution in Rooms
l. Circular and Plane Jets
m. Diffussers and Induction

10. Pump and Piping System
a. Water and Refrigerant Piping
b. Comparison of Water and Air as Heat-Conveying Media
c. Water Heater
d. Heat Distribution from Hot-Water System
e. High-Temperature Water Systems
f. Available Pipe and Tubing
g. Pressure Drop in Water Piping Installation
h. Pressure Drop in Refrigerant Piping Installation
i. Pump Characteristic and Selection
j. Design of a Water-Distribution System
k. Sizing the Expansion Tank

11. Optimization in System Selection
a. Strategy to find the best solution
b. How to Obtain an Efficient HVAC System
c. When Water-Cooled Chiller Chosen
d. When Air-Cooled Chiller Chosen
e. Air Distribution Selection
f. Water Piping Distribution Selection
g. Cooling Tower Selection

TRAINING DURATION : 5 days

INVESTATION PRICE :

  • Rp 9.500.000/person (full fare)  or
  • Rp 9.250.000/person (early bird, payment 1 week before training) or
  • Rp 8.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
DR. Ir. I Made Astina, M.Eng. is currently assistant professor of mechanical Engineering, Faculty of Mechanical and Aerospace Engineering ITB. He graduated from Mechanical Engineering Department ITB in 1992. Prior to his Ph.D. obtainment in Engineering (thermodynamics, school of science for open and environmental systems) from Keio University Tokyo, Japan in 2004, he received Master of Science in Engineering (mechanical engineering department) from the same university in 1997. His researches concern on thermodynamic, development of new thermal systems, thermodynamic cycles, air conditioning and refrigeration systems. His papers were published in international and national journals, besides he also presents his papers in international and national seminars. Besides teaching at the university, he also has experiences to give short courses for industrial practical engineers and publics and to collaborate practical consultant works.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Grounding System And Lighting Protection (BANDUNG)

 

Grounding System And Lighting Protection (BANDUNG)

Tanggal

  • 28 Aug 2017-31 Aug 2017
  • 12 Sep 2017-15 Sep 2017
  • 10 Oct 2017-13 Oct 2017
  • 13 Nov 2017-16 Nov 2017
  • 04 Dec 2017-07 Dec 2017

Tempat   
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INVESTATION PRICE/PERSON :

  1. Rp 8.950.000/person (full fare)  or
  2. Rp 8.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 8.500.000/person (if there are 3 or more participants from the same company)

OBJECTIVES :
Pelatihan ini ini memberikan pengetahuan dan wawasan mengenai grounding dalam sistem distribusi tenaga listrik. Pelatihan ditekankan pada perencanaan system pentanahan dan perlindungan peralatan dari tegangan lebih petir, operasi dan proteksi sistem distribusi.

TRAINING MATERIAL OUTLINE :

  1. Basic Concepts
    • Purpose of Grounding,
    • Basic Safety Concepts,
    • Terms and Definition
  2. Safety Standards
    • Permissible Body Currents,
    • Permissible Touch and Step Voltages,
    • Design Considerations
  3. Grounding Practices
    • Standards (National/IEEE/IEC),
    • Grounded vs. Ungrounded,
    • Distribution Grounding Electrodes
  4. Ground Potential Rise Calculations
    • Fault Current Distribution,
    • Modeling/Analysis Requirements,
    • Thevenin Equivalent at Neutral, Transmission and Distribution System Interaction, High Impedance Faults
  5. Soil Modeling
    • Soil Structure ,
    • Soil Measurement Techniques,
    • Soil Resistivity Models,
    • Measurement Interpretation
  6. Ground Measurements
    • Fall of Potential Method,
    • The Smart Ground Multimeter,
    • Ground Integrity Tests,
    • Transferred and Induced Voltage Measurements
  7. Distribution System Transients
    • Fault Transients,
    • Lightning,
    • Switching,
    • Ferroresonance,
    • Impact of Grounds – Voltage Sags/Swells,
    • Impact on Power Quality
  8. Lightning Protection
    • Lightning Overvoltages,
    • Mechanisms of Lightning,
    • Lightning Characteristics,
    • Over Voltage Protection,
    • Insulation Coordination,
    • Protection of RTUs
  9. Fault Detection and Isolation
    • Low Impedance Faults,
    • High Impedance Faults,
    • Faulted Circuit Indicators,
    • Fault Distance Indicators

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Pelatihan ini diberikan pada para teknisi, operator maupun supervisor yang bekerja dibidang ketenaga listrikan di industri untuk menangani masalah operasi, instalasi dan pemeliharaan system pentanahan dan proteksi petir

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electrical Power System Analysis Using ETAP (BANDUNG)

 

Electrical Power System Analysis Using ETAP (BANDUNG)

Tanggal

  • 21 Aug 2017-24 Aug 2017
  • 04 Sep 2017-07 Sep 2017
  • 02 Oct 2017-05 Oct 2017
  • 14 Nov 2017-17 Nov 2017
  • 11 Dec 2017-14 Dec 2017

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVES :
Pelatihan ini bertujuan meningkatkan pengetahuan dan wawasan mengenai analisa system tenaga. Untuk mensimulasikan hasil Analisa digunakan software Aplikasi ETAP. Pelatihan ditekankan pada analisa pada jaringan tenaga listrik Tegangan menengah hingga tegangan rendah yang meliputi Studi Aliran daya, Analisa Hubung singkat, Analisa Transien dan Harmonisa sehingga setelah mengikuti pelatihan peserta akan dapat :

  • Meningkatkan pengetahuan dan wawasan mengenai kondisi operasi Sistem Tenaga
  • Melakukan analisa Aliran Daya menggunakan ETAP
  • Melakukan Analisa Hubung Singkat menggunakan ETAP
  • Melakukan Analisa Motor Starting menggunakan ETAP
  • Melakukan Analisa Transient menggunakan ETAP
  • Melakukan Studi Harmonisa dan menentukan ukuran Filter

TRAINING MATERIAL OUTLINE :
1. Electric power grid representation and characteristic
(System overview, Elements of Electrical Power System, per-unit System)

2. Building One-Line Diagram Using ETAP
(Add Elements, Select & Deselect Elements, Element and Connector Colors, Relocate Elements, Cut, Copy, & Paste, Size, Symbol, & Orientation, Protective Devices, Nodes & Buses, Group & Ungroup, Composite Networks)

3. Load Flow Calculation Methods
(Newton-Raphson, Fast-Decoupled, Gaus-Siedel)

4. Load Flow Study Using ETAP
(Load Flow Toolbar, Load Flow Study Case Editor, Load Flow Display Options, Load Flow Calculation Methods, Load Flow Required Data, Load Flow Output Reports)

5. Fault Calculation Methods
(Impedance Methode, Symetrical Component Methode)

6. Short-Circuit Analysis
(Short-Circuit Toolbar, Short-Circuit Study Case Editor, Short-Circuit Display Options, Short-Circuit Required Data, Short-Circuit Output Reports)

7. Motor Starting Analysis
(Motor Starting Methods, Motor Starting Calculation)

8. Motor Starting Analysis Using ETAP
(Motor Starting Toolbar, Motor Starting Study Case Editor, Info Page, Model Page, Time Event Pages, Add Action by Starting Category, Add Action by Load, Motor Starting Display Options, Motor Starting Calculation Methods, Motor Starting Required Data, Motor Starting Output Reports, Motor Starting Time Slider Toolbar)

9. Transient Stability Anaysis
(Purpose for Performing Transient Stability Study, Power System Stability Definition, Stability Limits)

10. Transient Stability Anaysis Using ETAP
(Transient Stability Toolbar, Transient Stability Study Case Editor, Info Page, Events Page, Dyn Model Page, Transient Stability Plots, Transient Stability Required Data, Transient Stability Output Reports, Transient Stability Time Slider Toolbar)

11. Harmonic Analysis
(Definition, Harmonic Parameters, Harmonic Sources)

12. Harmonic Analysis Using ETAP
(Harmonic Analysis Toolbar, Harmonic Analysis Study Case Editor, Harmonic Analysis Display Options, Harmonic Analysis Calculation Methods, Harmonic Analysis Required Data, Harmonic Analysis Output Reports, Harmonic Analysis Order-Slider, Harmonic Analysis Frequency-Slider)

WHO SHOULD ATTEND THIS TRAINING?
Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Practice session
  12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Trainer
Ir. Hasan Surya, MT.
He is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at  Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN) and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences and now he is ready to share his knowledge and experiences to industrial world throught training class.

INVESTATION PRICE/ PERSON :

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Vibration Monitoring & Control System (BANDUNG)

 

Vibration Monitoring & Control System (BANDUNG)

Tanggal

  • 14 Aug 2017-16 Aug 2017
  • 13 Sep 2017-15 Sep 2017
  • 11 Oct 2017-13 Oct 2017
  • 08 Nov 2017-10 Nov 2017
  • 27 Dec 2017-29 Dec 2017

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

INVESTATION PRICE/PERSON :

  1. Rp 6.500.000/person (full fare)  or
  2. Rp 6.250.000/person (early bird, payment 1 week before training) or
  3. Rp 5.950.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Tas
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INTRODUCTION :
Vibration is the most problem we found in rotating instrument. This course will lead participant to understand vibration phenomena and caracteristic . vibration spectrum also can inform that some problem generating in the the equipment.
After the course participant will :

  1. Have a good basic of mechanical vibration
  2. Ability to interprete case vibration in their rotating equipment
  3. Ability to select probe of vibration

TRAINING MATERIAL OUTLINE :

  1. Fundamental vibration
  2. Vibration measurement and instrument
  3. Vibration standard
  4. vibration phenomena :
    • Unbalance
    • Misalignment
    • Resonance
    • Gear meshfrequence
    • Bearing vibration and analysis
  5. Vibration and trouble shooting
  6. Vibration in gas turbine engine
  7. Vibration in pump and compressor

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electrical System Generatorset (BANDUNG)

Jadwal Training

Electrical System Generatorset (BANDUNG) TRAINING OBJECTIVES : Meningkatkan pengetahuan dan wawasan tentang system kelistrikan pada Generatorset. Topik training ditekankan pada operasi, proteksi dan pemeliharaan system ... Baca Selengkapnya

Electrical System Generatorset (BANDUNG)

 

Electrical System Generatorset (BANDUNG)

TRAINING OBJECTIVES :
Meningkatkan pengetahuan dan wawasan tentang system kelistrikan pada Generatorset. Topik training ditekankan pada operasi, proteksi dan pemeliharaan system kelistrikan generatorset. Sehingga setelah mengikuti pelatihan peserta dapat :

  • mengenal konstruksi Generator AC/DC (Stator, Rotor, Model Lilitan Kumparan, Koneksi)
  • memahami prinsippembangkitanteganganAC/DC dan pembangkitan tegangan AC 3 Fasa
  • memahami sifat-sifat generator ketika dibebani/beroperasi
  • Peserta mengetahui tipe/macam sistem eksitasi (Brush/Brushless excitation)
  • Memahami pengaruh eksitasi pada generator (Tegangan Induksi, Arus, faktor daya)
  • Peserta memahami bagian-bagian dari AVR, fungsi dan prinsip kerja AVR
  • Peserta mengetahui tahapan pengoperasian generator untuk disambungkan ke Busbar
  • Peserta mengetahui cara pembebanan generator dan menentukan kapasitas generator
  • Peserta mengetahui prinsip kerja dari Automatic Main Failure/Automatic Transfer Switch
  • Peseta mengetahui jenis-jenis peralatan proteksi pada generator
  • Peserta mengetahui cara-cara menguji sistem isolasi serta penginterpretasikan hasil pengukurannya sesuai standard
  • Peserta mengetahui cara-cara pengujian generator untuk kepentingan pemeliharaan

TRAINING MATERIAL OUTLINE :

  1. Electrical Power Generator
    1. Construction AC/DC Generator (Stator, Rotor. Winding configurations)
    2. Principles of operation (DC Generator, Single phse generation, Three phase generation)
    3. Generator Characteristics
  2. Excitation system
    1. Types of exciters (Brush exciter, Brushless exciter, Self exciter)
    2. Characteristics of exciters
    3. AVR system (AVR functions, Types of AVR, AVR components, Principle of operation)
  3. Generator Operation
    1. Starting System
    2. Synchronizing to Busbar (Requirements, synchronizing procedure)
    3. Generator Loading (Procedure of Generator loading, Types of Load, Load sharing)
    4. Generator Instrumentation System
    5. Generator sizing
  4. Generator Protection
    1. Types of Fault (Insulation Faults, Loss of Excitation, loss of Primemover)
    2. Protective Devices (Fuse, MCB/MCCB, Power CB, OCR, GFR)
    3. Types of Generator protection (Overload/short circuit protection, Over/Under Voltage protection)
  5. Insulation Testing
    1. Factors Affecting Insulations
    2. Resistance Testing
    3. Power Factor Testing
    4. High Potential Testing
    5. Withstand Voltage Testing
  6. Generator Testing and Maintenance
    1. Stator and Rotor Insulation Test,
    2. Stator winding Test
    3. Rotor Voltage Test, Data Interpretation)

WHO SHOULD ATTEND ?
Training ini diberikan kepada para teknisi, operator maupun supervisor yang bekerja dibidang ketenagalistrikan di industri untuk menangani masalah operasi, instalasi dan pemeliharaan Generator

INSTRUCTOR :   Ir. Hasan Surya, MT. and Team

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION :   4 days

WAKTU TRAINING :

  • 17 Jul 2017-20 Jul 2017
  • 31 Jul 2017-03 Aug 2017
  • 18 Sep 2017-21 Sep 2017
  • 16 Oct 2017-19 Oct 2017
  • 27 Nov 2017-30 Nov 2017
  • 05 Dec 2017-08 Dec 2017

HARGA INVESTASI/PESERTA :

  1. Rp. 7.950.000/peserta (bayar penuh) atau
  2. Rp. 7.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp. 7.500.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN) and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

High Voltage Electrical Equipmment Operation, Maintenance And Repair (BANDUNG)

 

High Voltage Electrical Equipmment Operation, Maintenance And Repair (BANDUNG)

 TRAINING OBJECTIVES :

  1. Pelatihan ini memberikan pengetahuan praktis mengenai peralatan tegangan tinggi dalam system tenaga listrik di Industri Pelatihan ditekankan pada Instalasi, Operasi dan Maintenance peralatan sesuai dengan standard Nasional/IEC/IEEE.  termasuk didalamnya instalasi pada area berbahaya, sehingga setelah mengikuti pelatihan diharapkan para peserta dapat Mengetahui secara praktis mengenai:
  2. Instalasi, operasi dan pemeliharaan Generator
  3. Instalasi, operasi dan pemeliharaan Transformator Tenaga
  4. Instalasi, operasi dan pemeliharaan Switchgear and Distribution Panel
  5. Instalasi, operasi dan pemeliharaan Motor-motor Listrik
  6. Instalasi, operasi dan pemeliharaan Power Circuit Breaker
  7. Instalasi dan pemeliharaan Saluran
  8. Identifikasi Bahaya dan Keselamatan Kerja pada Sistem Tenaga Listrik
  9. Macam-macam peralatan dan standard uji peralatan listrik
  10. Asessment peralatan Listrik

TRAINING MATERIAL OUTLINE :

  1. Electrical Generator  (Construction, principle of Operation, Generator characteristic, Generator operation)
  2. Power Transformer (Construction, principle of operation, Vector group, Earthing schemes, Transformer sizing and protection)
  3. Power Circuit Breaker (Purpose Application, Circuit Breaker Construction, Arc quenching Mechanism, Circuit Breaker Operation, Types of Circuit Breaker, Circuit Breaker Control)
  4. Switchgear and Distribution Panel (Components, Operational data, Selection Guide)
  5. Electrical Motor (Electrical Motor Fundamental, 3 Phase Induction Motor Characteristic, Motor Starting and Control)
  6. Electrical Line (Overhead lines, Power Cables, Wiring and Conections)
  7. Electrical Power Installation Requirement based on Standards (National/IEC/PUIL)
  8. Selection Guide to Electrical Components (Conductor selection, Fuse Selection, Circuit Breaker Selection, etc.)
  9. Electrical Safety (Basic Safety Concepts, Electrical Hazards, Safe Operation)
  10. Grounding System (Purpose of Grounding, Standards (National/IEC), Distribution Grounding Electrodes)
  11. Insulation Testing (Insulation Materials, Factors Affecting Insulations, Resistance Testing, Power Factor Testing, High Potential Testing, Withstand  Voltage Testing)
  12. Equipments Maintenance (Maintenance Fundamentals, Initial Tests, Routine Tests, Adjustments, Insulation Resistance Testing, Contact Resistance Tests, High Potential Tests, Power Factor Tests)
  13. Electrical Axexxment (Asessment Method, Asessment Scoring)

WHO SHOULD ATTEND THIS TRAINING ?
Minimum SLTA; untuk para operator, teknisi, engineer, perancang, penyelia, manajer, dan lain-lainnya yang ingin mengetahui/memahami/mendalami pengetahuan praktis mengenai Instalasi, operasi dan pemeliharaan peralatan Listrik di Industri yang memenuhi Standard Nasional/IEC/IEEE.

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

DURATION : 5 Days

WAKTU TRAINING :

  • 17 Jul 2017-21 Jul 2017
  • 31 Jul 2017-04 Aug 2017
  • 18 Sep 2017-22 Sep 2017
  • 16 Oct 2017-20 Oct 2017
  • 20 Nov 2017-24 Nov 2017
  • 11 Dec 2017-15 Dec 2017

HARGA INVESTASI/PESERTA :  

  1. Rp. 8.950.000/peserta (bayar penuh)  atau
  2. Rp. 8.750.000/peserta (early bird, yang membayar 1 minggu sebelum training)  atau
  3. Rp. 8.500.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Ransel
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Practice session Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)    1.

TRAINING INSTRUCTOR
Hasan Surya, Ir., MT. and Team
He is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2024

informasi-seminar.com | infoseminar.co.id | namaproduk.com