Manajemen Post Weld Heat Treatment : Teori, Standard Prosedur dan Aplikasi (BANDUNG)

Jadwal Training

Manajemen Post Weld Heat Treatment : Teori, Standard Prosedur dan Aplikasi (BANDUNG) Tanggal 19 Dec 2016-21 Dec 2016 Tempat Hotel Kagum Group Bandung (Golden Flower, ... Baca Selengkapnya

Manajemen Post Weld Heat Treatment : Teori, Standard Prosedur dan Aplikasi (BANDUNG)

Jadwal Training

Manajemen Post Weld Heat Treatment : Teori, Standard Prosedur dan Aplikasi (BANDUNG)

Tanggal

  • 19 Dec 2016-21 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

PENDAHULUAN:
Pada saat kontruksi jaringan pipa minyak dan gas akan melibatkan proses penyambungan pipa melalui proses pengelasan. Pada baja yang mengalami proses pengelasan akan terjadi perubahan struktur mikro dan butiran pada daerah lasan dan dan terpengaruh panas. Perubahan tersebut akan menurunkan ketahanan korosi baja dan menurunkan ketangguhannya serta  meningkatkan resiko kegagalan.  PWHT adalah bagian dari process heat treatment yang bertujuan untuk menghilangkan pengaruh negatif yang terbentuk setelah proses pengelasan selesai. Pada training singkat 3 hari Manajemen Post Weld Heat Treatment Teori, Standard Prosedur dan aplikasi, akan dijelaskan pengaruh negatif akibat proses pengelasan dan perbaikan sifat material dengan PWHT terutama untuk material baja.

TUJUAN TRAINING:
Setelah mengikuti training ini, peserta diharapkan :

  • Memahami dan mengetahui metalurgi proses pengelasan pada baja
  • Mengetahui dan memahami pengaruh negatif pada daerah lasan dan daerah yang terpengaruh panas
  • Memahami dan mengetahui strandard prosedur PWHT
  • Memahami teknik inspeksi material hasil proses pwht
  • Cara penulisan dan pelaporan  material hasil proses PWHT

CAKUPAN MATERI TRAINING:

  1. Metalurgi pengelasan pada baja
  2. Korosi pada baja  daerah lasan
  3. PWHT teori, standard prosedur dan aplikasi
  4. Inspeksi pada PWHT
  5. Penulisan dan pelaporan
  6. Diskusi interaktif

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?
Teknisi di bidang inspeksi, pemeliharaan dan perawatan peralatan atau semua pihak yang ingin memahami topik ini.

TRAINING DURATION :  3 hari

INVESTATION PRICE/PERSON :    

  1. Rp 6.500.000/peserta (bayar penuh)  atau
  2. Rp 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training)  atau
  3. Rp 5.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Backpack
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Djoko Hadi Prajitno, MSME. was graduated from Mining Metallurgy Bandung Institute of Technology (ITB) and Material Engineering UNSW Australia. He is as expert in Metallurgy/materials engineer at Metallurgy Laboratory Pusat Teknologi Nuklir Bahan dan Radiometri (PTNBR) Badan tenaga nuklir nasional (BATAN) Bandung. He is also lecturer at University of Jenderal Achmad Yani Bandung and lecturer at ITENAS (Institut teknologi nasional) Bandung. In campus he teachs material engineering, corrosion, advanced material, coating and metallurgy. He has researched some topics related to his expertise such as

  1. Research and development metal alloy with zirconium matrix
  2. Research and development coating of metal alloy inconel with aluminate in collaboration with mining engineering ITB
  3. Production and development of compound alloy between nikel-aluminida metals in collaboration with mechanical engineering ITB
  4. Coating of nikel aluminida at inconel alloy with spray Coating in collaboation with mechanical engineering ITB
  5. Research on Coating
  6. Research for production of material for stater drive Hercules airoplane in collaboration with DISLITBANG TNI AU
  7. Welding research of dissimilar metal
  8. And others

He frequently teachs training class for participants from many Indonesian companies. he has experience and knowledge about materials and skill that can be beneficial for warehouse people. He is member or has experience at some organizations such as HFI, Indonesian Corrosion Association, LSP AKN, Indosian Petroleum Association, National America Corrosion Engineer . Related to his expertise, he has much field experiences.

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Advance Course On Lighting Protection And Grounding System (BANDUNG)

Jadwal Training

Advance Course On Lighting Protection And Grounding System (BANDUNG) Tanggal 14 Nov 2016-18 Nov 2016 19 Dec 2016-23 Dec 2016 Tempat Hotel Kagum Group Bandung ... Baca Selengkapnya

Advance Course On Lighting Protection And Grounding System (BANDUNG)

Jadwal Training

Advance Course On Lighting Protection And Grounding System (BANDUNG)

Tanggal

  • 14 Nov 2016-18 Nov 2016
  • 19 Dec 2016-23 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INVESTATION PRICE/PERSON :

  • Rp 9.500.000/person (full fare)  or
  • Rp 9.250.000/person (early bird, payment 1 week before training) or
  • Rp 8.950.000/person (3 persons or more from the same company)

FACILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUCTOR
Dr. Dipl.Ing. Ir. Reynaldo Zoro graduated from Institute of Techonology, Bandung taking for High Voltage & Electrical. He has experience in Electrical Area since 1978. ?He is a Head of Laboratory of High Voltage, ITB and he is Chairman of Power Engineering Division of STEI-ITB.? He has given many short courses for in-house or public course of lightning protection, electrical grounding to industries in the country. He is member of CIGRE – France, member of Standardization for DLPE- ESDM, IEC TC-81 and DLPE – ESDM.

TRAINING MATERIAL OUTLINE :

  1. Lightning Phenomena
  2. External Lightning Protection System
  3. Grounding and Bonding System
  4. Internal Lightning Protection System
  5. Lightning Detection System-LPATS
  6. Lightning Protection & Grounding System for Telecommunication Installation
  7. Lightning Protection & Grounding System for Power Plan, Transmission & Distribution System
  8. Lightning Protection & Grounding System for oil, gas Refinary and Petrochemical Installation
  9. Design-External Lightning Protection System
  10. Design- Internal Lightning Protection System
  11. Design and Measurement Grounding and Bonding System
  12. Thermo Welding for Grounding System
  13. Lightning Arrester Test
  14. ITB Lightning Research Center Trip – Mt. Tangkubanperahu

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Analisis Dan Pengukuran Getaran Mekanik (BANDUNG)

Jadwal Training

Analisis Dan Pengukuran Getaran Mekanik (ANALYSIS AND MEASURING OF VIBRATION MACHINERY) TRAINING TIME : 30 Agustus-2 September 2021 06 Sep 2021-09 Sep 2021 11 Okt ... Baca Selengkapnya

Analisis Dan Pengukuran Getaran Mekanik (BANDUNG)

Jadwal Training

Analisis Dan Pengukuran Getaran Mekanik
(ANALYSIS AND MEASURING OF VIBRATION MACHINERY)

TRAINING TIME :
30 Agustus-2 September 2021
06 Sep 2021-09 Sep 2021
11 Okt 2021-14 Okt 2021
01 Nop 2021-04 Nop 2021
29 Nop 2021-02 Des 2021

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

PENDAHULUAN
Pada rotary machinery dengan adanya beban dan umur akan cenderung mengalami kerusakan. Kerusakan tidak akan terjadi tiba-tiba melainkan dari sedikit demi sedikit dan akan ditandai dengan timbulnya getaran yang berlebihan. Getaran kadang-kadang perlu dibatasi tetapi dapat juga dikehendaki. Getaran yang dikehendaki misalnya untuk kebutuhan penumbuk tanah, pengayak, vibrator dan lain sebagainya, sedangkan getaran pada mesin secara umum perlu dicegah. Masalah-masalah umum yang dapat menimbulkan getaran pada mesin antara lain ketidakseimbangan elemen yang berputar, poros melentur, kerusakan roda gigi, kurang baiknya transmisi sabuk dan bantalan, momen punter bervariasi, kelonggaran ikatan, dan kurang baiknya pelumasan. Efek atau akibat kerusakan-kerusakan seperti disebutkan di atas antara lain meningkatnya beban pada bantalan sehingga menurunkan umur bantalan, meningkatnya beban pada mesin, meningkatnya tegangan pada komponen mesin yang disebabkan karena kelelahan, dan menimbulkan efek unbalance pada rotating parts dan percepatan dan perlambatan pada mesin. Untuk mencegah terjadinya kerusakan lebih jauh diperlukan monitoring atau inspeksi getaran secara rutin. Dari hasil pengukuran amplitudo, frekuensi, dan FFT akan dapat diketahui sumber terjadinya kerusakan. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Analysis and Measuring of Vibration Machinery.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang disain (perancangan) konstruksi dan perawatan mesin pada industri rekayasa.

TUJUAN Training
Pemahaman tentang pengetahuan getaran mekanik, dan dapat melakukan monitoring getaran mesin, serta dapat mengukur dan menganalisis sumber getaran.

CAKUPAN MATERI TRAINING :

  1. Getaran dasar (Fundamental of vibration)
    Pengertian getaran, macam-macam getaran, gerakan harmonik sederhana, dan metoda bilangan kompleks
  2. Getaran bebas derajat kebebasan tunggal (Free vibration single degree of freedom)
    Getaran bebas derajat kebebsan tunggal tanpa dan dengan peredam, getaran torsi derajat kebebasan tunggal, dan persamaan gerak derajat kebebasan tunggal
  3. Getaran bebas derajat kebebasan paksa (Forced  vibration single degree of freedom)
    Getaran paksa eksitasi harmonik, getaran paksa dengan ketidakseimbangan massa putar, getaran paksa pada tumpuan bergerak, dan getaran paksa dengan periode eksitasi
  4. Getaran derajat kebebasan dua (Vibration of two degree of freedom)
    Getaran derajat kebebasan dua tanpa dan dengan peredam, dan getaran torsi derajat kebebasan dua
  5. Getaran derajat kebebasan banyak (Vibration of multi degree ofreedom).
    Getaran bebas derajat kebebasan banyak, getaran paksa derajat kebebasan banyak, dan getaran sistem kontinyu.
  6. Pemeriksaan getaran dan diagnosis (Measuring of vibration and diagnosis)
    Dasar-dasar dan karakteristik getaran, unit pengukuran, parameter getaran, pemilihan parameter pengukuran getaran, transduser dan alat ukur getaran, titik dan arah pengukuran getaran, batas-batas getaran yang diijinkan, dan interprestasi dan analisis getaran: Tidak seimbang (Unbalance), ketidaksebarisan (misalignment), oil whirl, kerusakan bantalan gelinding, dan getaran akibat kerusakan roda gigi.

INSTRUCTOR :    Tim Polban

INVESTATION PRICE/PERSON :
1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Failure Analysis Methods And Cases (BANDUNG)

Jadwal Training

Failure Analysis Methods And Cases (BANDUNG) Tanggal 22 Aug 2016-25 Aug 2016 19 Sep 2016-22 Sep 2016 17 Oct 2016-20 Oct 2016 07 Nov 2016-10 ... Baca Selengkapnya

Failure Analysis Methods And Cases (BANDUNG)

Jadwal Training

Failure Analysis Methods And Cases (BANDUNG)

Tanggal

  • 22 Aug 2016-25 Aug 2016
  • 19 Sep 2016-22 Sep 2016
  • 17 Oct 2016-20 Oct 2016
  • 07 Nov 2016-10 Nov 2016
  • 13 Dec 2016-16 Dec 2016

TEMPAT TRAINING
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

DURASI TRAINING :   4 hari

SASARAN PESERTA TRAINING:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang analisis kegagalan material pada industri rekayasa.

OUTPUT TRAINING:
Pemahaman tentang pengetahuan metoda analisis kegagalan material.

CAKUPAN MATERI TRAINING:

  • Purpose of failure analysis.
  • Overview of failure modes.
  • Yield criteria
  • Initiation of plastic deformation.
  • Stress concentration
  • Static failure.
  • Overview of fracture mechanics: fatigue fracture and creep.
  • Embrittlement and corrosion.
  • Failure analysis method and reporting.

HARGA INVESTASI/PESERTA :    

  • Rp 7.950.000/peserta (bayar penuh)  atau
  • Rp 7.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp 7.500.000/peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Drs. Slamet Sutjipto, MT. was graduated from ITB Bandung in metallurgical engineering. He is lecturer in mechanical engineering department at politeknik negeri Bandung(before as poltek ITB). He improved his competencies by following some courses beside his formal education. In his campus, he teachs for some subjects e.g.: material engineering or knowledge of material, energy convertion machine, engineering thermodynamics, instrumentation and control, practice of maintenance and repair, pneumatics and hydraulics. Drs. Slamet Sutjipto, MT. has been teaching training class for companies in Indonesia on several topics e.g.: NDT and Quality Assurance, Metallurgy for Metallurgist, Inspection and Corrosion, Failure Analysis Method, Engineering Material, Testing of Material, Design of Mechanic, Coating System and Protection.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

CAD Bidang Teknik Mesin (CAD FOR MECHANICAL: AUTOCAD OR CATIA)

Jadwal Training

CAD Bidang Teknik Mesin (CAD FOR MECHANICAL: AUTOCAD OR CATIA) Tanggal 06 Sep 2016-09 Sep 2016 04 Oct 2016-07 Oct 2016 01 Nov 2016-04 Nov 2016 ... Baca Selengkapnya

CAD Bidang Teknik Mesin (CAD FOR MECHANICAL: AUTOCAD OR CATIA)

Jadwal Training

CAD Bidang Teknik Mesin (CAD FOR MECHANICAL: AUTOCAD OR CATIA)

Tanggal

  • 06 Sep 2016-09 Sep 2016
  • 04 Oct 2016-07 Oct 2016
  • 01 Nov 2016-04 Nov 2016
  • 06 Dec 2016-09 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION
4 days

PENDAHULUAN :
Pada masing-masing tingkatan hampir di dalam semua jenis industri sewaktu proses pembuatan produk berlangsung (baik tingkatan politik perusahaan, perancangan, pembuatan dan perakitan, dan tingkatan distribusi dan purnajual) dan antara berbagai tingkatan tersebut terjadi suatu proses komunikasi atau pertukaran informasi di antara departemen pabrik (alat, mesin, dan manusia). Dari berbagai bentuk media komunikasi yang digunakan salah satunya dianggap sebagai media komunikasi yang terpenting yaitu gambar teknik, baik yang dibuat secara manual dituliskan di kertas ataupun memanfaatkan media elektronik CAD (Computer Aided/Augmented/Automated Design). Gambar teknik haruslah jelas dan dimengerti oleh semua orang, baik oleh perancang produk, perancang proses produksi, operator-operator mesin, pengontrol kualitas selama proses produksi berlangsung, yang dituliskan dalam spesifikasi geometrik. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi CAD Bidang Teknik Mesin (Computer Aided Drafting for Mechanical: AUTOCAD or CATIA).
 
SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perancangan pada industri rekayasa.
 
TUJUAN TRAINING :
Setelah mengikuti pelatihan ini, diharapkan peserta mempunyai kemampuan sebagai berikut:

  • Pemahaman tentang pengetahuan spesifikasi geometrik produk pada gambar teknik sesuai dengan standar internasional.
  • Keahlian dalam menggambar suatu produk dengan acuan spesifikasi geometrik sesuai dengan standar internasional.

CAKUPAN MATERI TRAINING :
1.    Spesifikasi geometrik.
2.    Perintah menggambar pada AutoCAD or CATIA
3.    Penggabungan gambar dan pemakaian makro.
4.    Pengenalan konsep 3 D, AutoVision, AutoCAD Designer

INVESTATION PRICE/PERSON :   

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.:

Pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.

In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Sweetening : H2S AND CO2 Removal in Chemical, Oil and Gas (BANDUNG)

Jadwal Training

Gas Sweetening : H2S AND CO2 Removal in Chemical, Oil and Gas (BANDUNG) Tanggal 18 Jul 2016-21 Jul 2016 29 Aug 2016-01 Sep 2016 05 ... Baca Selengkapnya

Gas Sweetening : H2S AND CO2 Removal in Chemical, Oil and Gas (BANDUNG)

Jadwal Training

Gas Sweetening : H2S AND CO2 Removal in Chemical, Oil and Gas (BANDUNG)

Tanggal

  • 18 Jul 2016-21 Jul 2016
  • 29 Aug 2016-01 Sep 2016
  • 05 Sep 2016-08 Sep 2016
  • 03 Oct 2016-06 Oct 2016
  • 29 Nov 2016-02 Dec 2016
  • 27 Dec 2016-30 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
With increasing demands to natural gas in Indonesia, sour gases are being tapped for utilization after purification. But, the natural gas that is transported to the fuel market must meet legal and safety requirements; it must be non-toxic, non-corrosive and safe to environment. For that reasons, gas conditioning or specifically gas treating is a very important step in gas processing scheme. H2S, and CO2, are removed to certain level through a gas sweetening process. There are many processes available. The amines (MEA, DEA, MDEA) are the most popular solutions and thus commonly used in many fields. This course is designed as an effective practical shortcut to understand the amine sweetening process and all features and problems encountered in amine plant operations for engineers, operators, technicians, and anyone who involve or responsible  in H2S and CO2 removal.

The course content and approach are designed to suit participants of different background and different position in the company. It will be delivered as a to-the-point explanation by a professional instructor, utilizing an easy-to-understand examples and illustrations, especially the actual findings in Indonesia.

TRAINING OBJECTIVES :
By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more about the principles of amine sweetening, identify and discuss the function of each component used in the process, and trace process flow through a typical amine unit, discuss and consult their specific problems they are about to bring to the class, and share experiences with others.

After completion of this course, participants will understand how each component in the unit operates, the effects of process variables, what and how to monitor the unit and make necessary adjustments, what and how to perform routine maintenance, and trobleshooting common problems affecting proper operation of the unit, in order to achieve the goals of gas sweetening.

TRAINING HIGHLIGHT :

  1. Production of Transportable and Salable Gas Stream
  2. Legal and Safety Requirements in Gas Fuel Market
  3. Overview of Natural Gas Processing and Gas Treating
  4. The Principles of Reaction Type Gas Sweetening
  5. Amine Sweetening Process Flow and Components
  6. Amine Sweetening Plant Operation and Controls
  7. Amine Conditioning and Amine Losses Control
  8. Plant Maintenance and Troubleshooting

TRAINING MATERIAL OUTLINE :

  1. Lean-rich and high-low pressure natural gas product
  2. Gas-well gas and associated gas
  3. Typical near well surface production operations and facility
  4. Examples of gas producing schemes
  5. Sales specifications, environmental requirements and economics
  6. Gas sale contract and limitation of H2S and CO2 contents
  7. Gas condensate and natural gas liquid recovery
  8. Refrigeration, expansion and expansion-turbine cooling for condensate recovery
  9. Gas processing, conditioning and treating
  10. Objectives of the gas process
  11. Reaction type sweetening and the mechanisms of H2S and CO2 removal
  12. The principles of absorption process with alkanolamines
  13. Typical sweetening unit and the process variables
  14. Inlet separator, contactor column and flash tank
  15. The role of inlet gas temperature and inlet amine temperature
  16. Filters and lean/rich heat exchanger
  17. Stripper column and reflux condenser/accumulator
  18. Reboiler, reclaimer, and surge tank
  19. The role of reboiler, reclaimer and heat exchanger temperatures
  20. Circulation pump and trim cooler
  21. The role of contactor, stripper, filter and flash tank pressures
  22. The problem of amine losses
  23. Reducing amine losses and amine tests
  24. The problem of foaming and control of foaming tendency
  25. Maintenance and troubleshooting of amine unit
  26. Safety for working at amine unit
  27. Recommendation for startup and shutdown
  28. Relative performance of alkanolamines

INVESTATION PRICE/PERSON :   

  • Rp 8.750.000/person (full fare)  or
  • Rp 8.500.000/person (early bird, payment 1 week before training) or
  • Rp 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Risk Based Inspection (RBI) (BANDUNG)

Jadwal Training

Risk Based Inspection (RBI) (BANDUNG) Tanggal   20 Jul 2016-22 Jul 2016 10 Aug 2016-12 Aug 2016 21 Sep 2016-23 Sep 2016 19 Oct 2016-21 ... Baca Selengkapnya

Risk Based Inspection (RBI) (BANDUNG)

Jadwal Training

Risk Based Inspection (RBI) (BANDUNG)

Tanggal  

  • 20 Jul 2016-22 Jul 2016
  • 10 Aug 2016-12 Aug 2016
  • 21 Sep 2016-23 Sep 2016
  • 19 Oct 2016-21 Oct 2016
  • 09 Nov 2016-11 Nov 2016
  • 14 Dec 2016-16 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION:
Risk-Based Inspection is a systematical process that identifies, assesses and map  industrial risks, which can compromise equipment integrity in both pressurized  equipment and structural elements. The high risk equipments are then managed by a  proper inspection interval, method and coverage. In the RBI philosophy, it is more cost- effective to allow some systems to fail as long as the consequences of the failure are  low, on the other hand, some systems may have such high consequences of failure  that failure is totally unacceptable, and therefore, these items should receive most  attention by using a proper inspection plan & practice. In this course API 581 and API  580 and other DNV and ABS guidelines and recommended practices, will be consulted.

TRAINING MATERIAL OUTLINE :
1.    Defining boundary system to be assessed
2.    Screening operating unit within a plant to identify area of high risk.
3.    Identifying the damage mechanism operative
4.    Determining the technical module sub-factor and likelihood of failures
5.    Determining the hazard areas and consequence of failure
6.    Estimating a risk value of each equipment, tabulated and ranked
7.    Prioritizing the equipment maintenance based on a the measured risk
8.    Designing an appropriate inspection program.
9.    Systematically managing the risk equipment failures.

TRAINING BENEFIT :

  • Increased knowledge of equipment which may pose a potential risk.
  • More reliable equipment and plant operation.
  • Increased safety.
  • Cost optimization through switching to non-invasive inspection techniques.
  • Possibility to tailor shutdown scope.
  • Option to extend run lengths where applicable national regulations permit it.
  • Increased teamwork during the implementation process.
  • Development of a knowledge database including equipment design, process features, damage mechanisms and inspection strategies

WHO SHOULD ATTEND THIS TRAINING?
Plant and Pipeline Operators, Supervisors, Engineers and Manager or every one who should know this topic.

INVESTATION PRICE/ PERSON :    

  1. Rp 6.950.000/person (full fare)  or
  2. Rp 6.750.000/person (early bird, payment 1 week before training) or
  3. Rp 6.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Dr. Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and  Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager, at PT. MMS, PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity  research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas And Steam Turbine : Operation, Maintenance And Troubleshooting (BANDUNG)

Jadwal Training

Gas And Steam Turbine : Operation, Maintenance And Troubleshooting (BANDUNG) Tanggal 19 Jul 2016-22 Jul 2016 29 Aug 2016-01 Sep 2016 05 Sep 2016-08 Sep 2016 ... Baca Selengkapnya

Gas And Steam Turbine : Operation, Maintenance And Troubleshooting (BANDUNG)

Jadwal Training

Gas And Steam Turbine : Operation, Maintenance And Troubleshooting (BANDUNG)

Tanggal

  • 19 Jul 2016-22 Jul 2016
  • 29 Aug 2016-01 Sep 2016
  • 05 Sep 2016-08 Sep 2016
  • 03 Oct 2016-06 Oct 2016
  • 14 Nov 2016-17 Nov 2016
  • 19 Dec 2016-22 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

LATAR BELAKANG :
Sebagai pembangkit energi siap pakai,  Turbin Gas dan Turbin Uap menempati posisi krusial pada mata rantai proses setiap kilang. Kesiapan para pelaku lapangan merupakan suatu keharusan untuk menghadapi terjadinya masalah-masalah yang mungkin timbul. Mengingat hal tersebut, pembekalan pengetahuan dan ketrampilan pada setiap personalia yang terkait akan lebih menjamin keberhasilan sasaran kilang yang bersangkutan.

TUJUAN TRAINING :
Setelah training para perserta diharapkan lebih :
1.    memahami prinsip kerja turbin gas dan turbin uap.
2.    memahami spesifikasi turbin uap dan turbin gas.
3.    memahami fungsi setiap komponen dan keterbatasannya.
4.    memahami parameter operasi turbin gas dan turbin uap.
5.    mampu mengambil langkah langkah tepat terhadap kelainan operasi yang timbul.
6.    memahami pertimbangan yang melatarbelakangi setiap langkah perawatan.

CAKUPAN MATERI TRAINING :
1.    Siklus Brayton dan Siklus Rankine ; baku dan termodifikasi.
2.    Prinsip kerja Turbin Gas dan Turbin Uap.
a.    Tahapan konversi energi dari energi uap sampai dengan energi poros dan listrik.
b.    Kaidah-kaidah untuk setiap pentahapan konversi energi
3.    KomponenTurbin Gas dan Turbin Uap serta fungsi masing-masing  komponennya.
4.    Komponen Pendukung Turbin Gas dan Turbin Uap serta fungsi masing-masing komponennya.
a.    Kondensor (untuk turbin uap kondensasi)
b.    Demister (untuk kompresor)
c.    Oil Cooler
5.    Prestasi Operasi Turbin Gas dan Turbin Uap
a.    Balans energi dan massa
b.    Efisiensi Pembangkitan
c.    Pemakaian Kalor Spesifik (Heat Rate)
d.    Pemakaian Uap Spesifik (Spesific Steam Consumption) untuk Turbin Uap
e.    Kurva Prestasi
6.    Operasi Turbin Gas dan Turbin Uap
a.    Start-Up
b.    Loading
c.    Shut-Down
7.    Maintenance
8.    Trouble shooting
9.    Diskusi

INVESTATION PRICE/PERSON :   

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti bidang Coal Energy , Argonne, Chicago, Ill., USA, bidang Combustion, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy.. Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training  untuk banyak perusahaan di Indonesia seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC  SES LTD, PLTGU  BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain.  Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Compressor : Operation, Maintenance And Troubleshooting (BANDUNG)

Jadwal Training

Compressor : Operation, Maintenance And Troubleshooting (BANDUNG) Tanggal 25 Jul 2016-27 Jul 2016 22 Aug 2016-24 Aug 2016 26 Sep 2016-28 Sep 2016 24 Oct ... Baca Selengkapnya

Compressor : Operation, Maintenance And Troubleshooting (BANDUNG)

Jadwal Training

Compressor : Operation, Maintenance And Troubleshooting (BANDUNG)

Tanggal

  • 25 Jul 2016-27 Jul 2016
  • 22 Aug 2016-24 Aug 2016
  • 26 Sep 2016-28 Sep 2016
  • 24 Oct 2016-26 Oct 2016
  • 09 Nov 2016-11 Nov 2016
  • 13 Dec 2016-15 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   3 days

TUJUAN TRAINING :
Training ini bertujuan untuk :
1.    Memahami prinsip kerja kompresor.
2.    Memahami kelebihan dan kekurangan masing-masing jenis kompresor.
3.    Memahami spesifikasi masing-masing jenis kompresor.
4.    Memahami spesifikasi sistem instalasi.
5.    Memahami parameter operasi.
6.    Mampu mengevaluasi unjuk kerja kompresor.
7.    Mampu menangani kelainan opersai (trouble).
8.    Memahami dan mampu melaksanakan perawatan.
9.    Mampu meramalkan unjuk kerja kompresor termodifikasi.

CAKUPAN MATERI TRAINING :
1.    Kompresor volumetrik (positive displacement compressors) dan kompresor dinamik (turbo).
2.    Komponen kompresor volumetrik dan kompresor dinamik.
3.    Sifat-sifat gas dan campuran gas serta proses kompresi.
4.    Pembangkitan tekanan
5.    Operasi kompresor
a.    Normal
b.    Perubahan kecepatan putar
c.    Perubahan beban
d.    Surging
e.    Chocking
6.    Prestasi kompresor :
a.    Kerugian-kerugian energi
b.    Neraca energi
c.    Efisiensi kompresor
d.    Kurva-kurva prestasi
7.    Prestasi kompresor :
a.    Kerugian-kerugian energi
b.    Neraca energi
c.    Efisiensi kompresor
d.    Kurva-kurva prestasi
8.    Komponen kritis kompresor dinamik :
a.    Sudu (vanes)
b.    Sudu pengarah ( intake guide vane)
c.    Bantalan ( journal and thrust bearing)
d.    Seal oil and buffer gas system
9.    Komponen-komponen dan peralatan bantu (auxiliaries)
a.    Sistem pelumasan
b.    Pendingin pelumas (oil cooler)
c.    Penjerat air (demister)
d.    Pemisah pelumas (oil separator)
10.    Kecepatan putar kritis
11.    Instalasi kompresor
12.    Operasi kompresor
a.    Start-up
b.    loading
c.    Shut-down
13.    Maintenance
14.    Trouble-shooting
15.    Diskusi

INVESTATION PRICE/PERSON :     

  • Rp 6.750.000/person (full fare)  or
  • Rp 6.500.000/person (early bird, payment 1 week before training)  or
  • Rp 6.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti bidang Coal Energy , Argonne, Chicago, Ill., USA, bidang Combustion, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy.. Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training  untuk banyak perusahaan di Indonesia seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC  SES LTD, PLTGU  BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain.  Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Boiler : Operation, Maintenance & Troubleshooting (Bandung)

Jadwal Training

Boiler : Operation, Maintenance & Troubleshooting (Bandung) Tanggal 15 Nop 2021-18 Nop 2021 13 Des 2021-16 Des 2021 Tempat Hotel Kagum Group Bandung (Golden Flower, ... Baca Selengkapnya

Boiler : Operation, Maintenance & Troubleshooting (Bandung)

Jadwal Training

Boiler : Operation, Maintenance & Troubleshooting (Bandung)

Tanggal
15 Nop 2021-18 Nop 2021
13 Des 2021-16 Des 2021

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

SASARAN TRAINING :
Menambah wawasan dan aplikasi para peserta dalam memahami boiler  secara menyeluruh sehingga para peserta :  dapat  memahami  saling  keterkaitan  antara  komponen komponen alat pada boiler dan fungsionalitasnya, serta  dapat memahami boiler dari sisi operasi, maintenance dan troubleshooting.

CAKUPAN MATERI TRAINING :

  1. Pinsip kerja boiler
  2. Komponen boiler dan alat pengaman
  3. Proses penguapan air
  4. Bahan bakar
  5. Proses pembakaran
  6. Sistem bahan bakar
  7. Sistem udara dan gas asap (flue gas)
  8. Sistem tarikan api (draft system)
  9. Sistem air dan uap
  10. Sistem alat pengaman dan regulasi
  11. Operasi boiler (preparation, start-up and shut-down)
  12. Tindakan aman (never and always)
  13. Water treatment
  14. Kemerosotan Boiler
  15. Perawatan dan management perawatan
  16. Troubleshooting
  17. Diskusi

INVESTATION PRICE/PERSON :  

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti bidang Coal Energy , Argonne, Chicago, Ill., USA, bidang Combustion, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy.. Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training  untuk banyak perusahaan di Indonesia seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC  SES LTD, PLTGU  BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain.  Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Genset : Teknologi, Perawatan dan Operasi (BANDUNG)

Jadwal Training

Genset : Teknologi, Perawatan dan Operasi (BANDUNG) Tanggal 18 Jul 2016-21 Jul 2016 23 Aug 2016-26 Aug 2016 06 Sep 2016-09 Sep 2016 04 Oct ... Baca Selengkapnya

Genset : Teknologi, Perawatan dan Operasi (BANDUNG)

Jadwal Training

Genset : Teknologi, Perawatan dan Operasi (BANDUNG)

Tanggal

  • 18 Jul 2016-21 Jul 2016
  • 23 Aug 2016-26 Aug 2016
  • 06 Sep 2016-09 Sep 2016
  • 04 Oct 2016-07 Oct 2016
  • 22 Nov 2016-25 Nov 2016
  • 27 Dec 2016-30 Dec 2016

TEMPAT TRAINING
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

DURASI TRAINING : 4 hari

TUJUAN :
Setelah mengikuti pelatihan Teknologi, Perawatan, dan Operasi Genset, peserta mengetahui dan memahami tentang :

  • Teknologi Mesin Diesel
  • Teknologi Generator Pembakit Listrik
  • Perawatan Terjadwal Genset
  • Teknik Pengoperasian Genset
  • Cara Mengatasi Gangguan Genset

CAKUPAN MATERI TRAINING:
1. Prinsip Dasar Mesin Diesel
• Prinsip Dasar, Kinerja Mesin Diesel
• Komponen Dasar Mesin Diesel

2. Sistem Pendingin Mesin Diesel
• Sistem Pendinginan Air dan Udara
• Komponen Sistem Pendingin Air
• Pendingin Air Jenis Langsung dan Tidak Langsung

3. Pelumasan Dan Sistem Pelumasan Mesin Diesel
• Jenis Pelumasan, Karakteristik, Bahan, Additives, Pelumas Sintetik
• Sistem, komponen Sistem Pelumasan Mesin Diesel
• Komponen Sistem Pelumasan

4. Sistem Bahan Bakar Mesin Diesel
• Rangkaian Sistem Bahan Bakar
• Feed Pump, Fuel Filter, Injector
• Injector
• In-Line Injection Pump
• Mechanical, Pneumatic Governor
• Distributor Injection Pump
5. Jadwal Perawatan, Trobleshooting Mesin Diesel

6. Prinsip Oprasi Generator
• Pengertian Dasar, Prinsip Induksi Generator
• Generator Sinkron

7. Komponen dan Sistem Penyetelan Generator S.R.
• Orientasi
• Komponen Generator dan Regulator
• Penyetelan dan Perawatan Regulator
• Penguji Daya Rectifier dan Modul Pembatas Tegangan
• Pengujian Modul Pembatas Tegangan
• Penyambung Fasa, Unit Oprasi, Hubungan Tegangan
• Pembebanan Generator, Power Factor
8. Panel Kontrol
9. Pengoperasian Genset
10. Trobleshooting Generator

SYARAT PESERTA : Memiliki latar belakang mekanik atau listrik secara umum.

PESERTA: Maintenance Dept. Technician, Logistics Dept. Technician, Utility Dept. Technicians, Genset Oprator, dll.

INSTRUKTUR : Ir. M.Munir Fahmi, Dipl.ME.,MT. and Team

INVESTATION PRICE/PERSON :

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. M. Munir Fahmi, Dipl.ME, MT. got his master degree from Brawijaya University Malang majoring in Energy Conversion. He is till now becoming lecturer at mechanical engineering Poltek ITB (Polban) and he is head of laboratory of fluid, thermal and otomotive. He teachs frequently for industrial training class for Indonesian companies participants for some topics on mechanical engineering such as Mechanical Rotating Equipment, Operation & Trouble Shooting, Pumps, Primover: Operation, Maintenance & Troubleshooting, Genset, Operation, Maintenance & Trouble Shooting, lubrication, Preventive & Predictive Maintenance, Advance Maintenance Management, Reliability Maintenance Engineering, Operation, Maintenance & Trouble Shooting of Pump & Compressor and etc.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Boiler: Operation & Maintenance (BANDUNG)

Jadwal Training

Boiler: Operation & Maintenance (BANDUNG) TRAINING TIME  :   20 Jun 2016-23 Jun 2016 26 Jul 2016-29 Jul 2016 08 Aug 2016-11 Aug 2016 26 ... Baca Selengkapnya

Boiler: Operation & Maintenance (BANDUNG)

Jadwal Training

Boiler: Operation & Maintenance (BANDUNG)

TRAINING TIME  :  

  • 20 Jun 2016-23 Jun 2016
  • 26 Jul 2016-29 Jul 2016
  • 08 Aug 2016-11 Aug 2016
  • 26 Sep 2016-29 Sep 2016
  • 24 Oct 2016-27 Oct 2016
  • 31 Oct 2016-03 Nov 2016
  • 05 Dec 2016-08 Dec 2016

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :    4 hari

LATAR BELAKANG:
Boiler dalam bidang industri banyak dijumpai pemanfaatannya baik untuk pemanas, pengering, pengawet proses, maupun pembangkit energi. Boiler merupakan mesin konversi energi berfungsi mengubah energi kimia bahan bakar menjadi energi uap atau bejana tertutup dimana panas pembakaran dialirkan ke air sampai terbentuk air panas (uap). Air panas pada tekanan tertentu kemudian digunakan untuk mengalirkan panas ke suatu proses.

Dengan memperhatikan pemanfaatan boiler di industri, maka boiler harus selalu dijaga terjadinya penurunan fungsi secara serius hingga rusak, yang dapat mengakibatkan kerugian perusahaan. Kondisi ini tidak dapat dicapai bila tidak didukung tenaga teknis yang kompeten.

Untuk mendapatkan tenaga teknis yang kompeten, perlu adanya pemahaman yang komprehensif tentang prosedur, aspek yang fundamental dan teknis yang terkait dengan operasi dan pemeliharaan boiler. Kemampuan tersebut juga dapat membantu perusahaan mereduksi terjadinya down time dan dapat meningkatkan keuntungan baik dari segi produksi maupun dari umur mesin yang lebih panjang.

TUJUAN TRAINING:
Setelah mengikuti pelatihan ini, peserta diharapkan:

  1. Dapat menjelaskan pengertian dan mengidentifikasi jenis-jenis boiler
  2. Dapat menjelaskan dan mampu mengaplikasikan K3, dan peraturan perundangan pesawat uap, dan dasar-dasar K3 dan P3K
  3. Dapat menjelaskan dan mampu mengoperasikan boiler
  4. Dapat menjelaskan dan mampu menyebutkan fungsi perlengkapan dan instalasi listrik boiler
  5. Dapat menjelaskan dan merencanakan bahan bakar dan proses pembakaran pada boiler
  6. Dapat menjelaskan dan mampu merencanakan air pengisi boiler dan cara pengolahannya
  7. Dapat menjelaskan performansi/kinerja boiler
  8. Dapat menjelaskan dan mampu melakukan peninjauan konstruksi boiler
  9. Dapat menjelaskan dan mampu mengaplikasikan pengetahuan bahan pada boiler
  10. Dapat menjelaskan dan mampu mengaplikasikan perpindahan panas pada boiler
  11. Dapat menjelaskan dan mampu mengidentifikasi sebab-sebab peledakan
  12. Dapat menjelaskan dan mampu menganalisis kerusakan dan kecelakaan peledakan pada boiler
  13. Dapat menjelaskan dan mampu melakukan inspeksi boiler serta pemeriksaan secara tidak merusak
  14. Dapat menjelaskan dan mampu melakukan reparasi boiler

CAKUPAN MATERI TRAINING:

  1. Pendahuluan (Ruang lingkup Boiler)
  2. Keselamatan dan kesehatan kerja
    •    Peraturan perundangan pesawat uap (Undang-undang No. 1 tahun 1970, Undang-undang dan peraturan uap 1930, Permenaker No. 01/Men/1988)
    •    Dasar-dasar K3 dan P3K
  3. Cara mengoperasikan Boiler
  4. Fungsi dan cara kerja instrumen Boiler
  5. Bahan bakar, proses pembakaran, dan bunner
  6. Air pengisi ketel dan pengolahannya
  7. Performansi/Kinerja Boiler
  8. Konstruksi dan pengetahuan bahan Boiler
  9. Perpindahan panas pada Boiler
  10. Analisis kerusakan Boiler
  11. Peledakan pada Boiler
  12. Inspeksi Boiler
  13. Perawatan Boiler

SIAPA YANG HARUS MENGIKUTI TRAINING INI ?:

  • Mechanical,  Construction Engineer
  • Operators, Technicians, Maintenance Personnel who involved in installation, testing, and maintenance of boiler
  • Experienced professionals who want to refresh or broaden their knowledge of boiler

INSTRUCTOR :    Ir. Maridjo,MT. and Team

INVESTATION PRICE/PERSON :   

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  • Modul Training
  • Flashdisk Training berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balongan pertamina, PT. Indocement, some PLTA, some hotels, PT.Pupuk Kujang, PT.Bio Farma, BPPT, PT. Bintang Agung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Basic Gas Engine (BANDUNG)

Jadwal Training

Basic Gas Engine (BANDUNG) Tanggal 25 Jul 2016-28 Jul 2016 29 Aug 2016-01 Sep 2016 13 Sep 2016-16 Sep 2016 10 Oct 2016-13 Oct 2016 ... Baca Selengkapnya

Basic Gas Engine (BANDUNG)

Jadwal Training

Basic Gas Engine (BANDUNG)

Tanggal

  • 25 Jul 2016-28 Jul 2016
  • 29 Aug 2016-01 Sep 2016
  • 13 Sep 2016-16 Sep 2016
  • 10 Oct 2016-13 Oct 2016
  • 22 Nov 2016-25 Nov 2016
  • 27 Dec 2016-30 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

WHO SHOULD ATTEND THIS TRAINING?:

  1. Mechanical, Rotating, Construction Engineer
  2. Operators, Technicians, Maintenance Personnel who involved in installation, testing, and maintenance of gas/ diesel engine system
  3. Experienced professionals who want to refresh or broaden their knowledge of gas engine

WHAT BENEFITS DO YOU GET FROM THIS TRAINING? :

  1. Sound understanding of gas engine components and functions
  2. Familiar with gas engine measurement, such as: efficiency, torque, speed, power and more
  3. Significantly improve your understanding of combustion system
  4. Develop troubleshooting skills, know-how
  5. Proper understanding of gas engine operation
  6. Improve your understanding of repairs and maintenance

TRAINING MATERIAL OUTLINE :
1. Pendahuluan

2. Dasar – dasar Engine

  • Difinisi
  • Klasifikasi
  • Sistim tenaga gas
    • siklus Otto
    • siklus Diesel
    • sikls Brayton
  • Istilah pada engine
  • Siklus dua langkah, siklus empat langkah
  • Perbandingan Diesel, Gasoline dan gas engine lainnya
  • Bahan bakar
  • Pembakaran bahan bakar
  • Faktor – factor yang mempengaruhi pembakaran
  • Spark ignitet engine
  • Gas engine

3. Komponen dasar engine

  • Block assembly
    • engine block
    • cylinder
    • cylinder liner
    • piston
    • connecting rod
    • crankshaft
    • fly wheel
    • camshaft
    • push rod
    • valve
    • peredam getaran
  • Cylinder head
  • Gear train

4. Engine system

  • Sistem pemasukan udara
  • Sistem pendinginan
    • Bagian bagian sistem pendinginan
    • Variasi sistem pendinginan
  • Sistem bahan bakar
    • Ruang bakar
    • Governor
  • Sistem pelumasan
    • Komponen sistem pelumasan
    • Fungsi pelumas
    • Sifat /kharakteristik pelumas
    • Penggolongan/klasifikasi
    • Pemilihan pelumas
  • Starting system
    • Electrical starting system
    • Air starting system

5. Karakteristik / performansi engine

6. Aplikasi di Pocari Sweat

7. Perawatan

  • Pengertian
  • Tujuan perawatan
  • Teknik dan strategi perawatan
  • Log sheet perawatan , monitoring dan inspeksi pada gas engine

8. Troubleshooting

  • Mesin tidak mau distart
  • Alternator tidak mau mengisi
  • Tidak ada tenaga
  • Mesin mengeluarkan suara aneh
  • Terlalu banyak mengeluarkan asap putih atau biru
  • Tekanan oli rendah
  • Suhu air terlalu tinggi
  • Suhu gas buang terlalu tinggi
  • Mesin pincang

TRAINING DURATION : 4 hari

INVESTATION PRICE/PERSON :

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balongan pertamina, PT. Indocement, some PLTA, some hotels, PT.Pupuk Kujang, PT.Bio Farma, BPPT, PT. Bintang Agung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Turbine : Operation, Maintenance And Troubleshooting (BANDUNG)

Jadwal Training

Gas Turbine : Operation, Maintenance And Troubleshooting (BANDUNG) TRAINING TIME  :   21 Jun 2016-24 Jun 2016 26 Jul 2016-29 Jul 2016 09 Aug 2016-12 ... Baca Selengkapnya

Gas Turbine : Operation, Maintenance And Troubleshooting (BANDUNG)

Jadwal Training

Gas Turbine : Operation, Maintenance And Troubleshooting (BANDUNG)

TRAINING TIME  :  

  • 21 Jun 2016-24 Jun 2016
  • 26 Jul 2016-29 Jul 2016
  • 09 Aug 2016-12 Aug 2016
  • 27 Sep 2016-30 Sep 2016
  • 25 Oct 2016-28 Oct 2016
  • 29 Nov 2016-02 Dec 2016
  • 27 Dec 2016-30 Dec 2016

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :    4 hari

PENDAHULUAN:
A gas turbine extracts energy from a flow of hot gas produced by combustion of gas or fuel oil in a stream of compressed air. It has an upstream air compressor (radial or axial flow) mechanically coupled to a downstream turbine and a combustion chamber in between. “Gas turbine” may also refer to just the turbine element. Energy is released when compressed air is mixed with fuel and ignited in the combustor. The resulting gases are directed over the turbine’s blades, spinning the turbine, and mechanically powering the compressor. Finally, the gases are passed through a nozzle, generating additional thrust by accelerating the hot exhaust gases by expansion back to atmospheric pressure. Energy is extracted in the form of shaft power, compressed air and thrust, in any combination, and used to power aircraft, trains, ships, electrical generators, and even tanks. To support the sufficient production system, we need tough worker or increase the worker skill of operation, maintenance, and trouble shooting of gas turbine profession.

WHO SHOULD ATTEND THIS TRAINING?:
Practitioner in the operator level, supervisor level or planner of machine maintenance technology at engineering industry, which at least senior high school or technical vocational school.

TRAINING OBJECTIVE :
1.    To able to know to operation, maintenance, and trouble shooting of gas turbine.

TRAINING MATERIAL OUTLINE :

  1. Overview of Gas Turbine Technology and Applications
    Simple cycle Gas Turbines; cycle considerations; applications; fuels and corrosion; emissions; combined cycle and cogeneration. Overview of Developments
    High temperature turbines, reheat turbines, close cycles, and other developments.
  2. Rotating Components and Matching
    Brief overview of compressor and turbine design; component characteristics and matching. Compressor surge and prevention.
  3. Vibration and Rotor Dynamics
    A review of vibration will include specific problems such as Blade Vibration and Shaft Critical Speeds. Case histories will link vibration with the fatigue failure of components. Rotor instability, in its various forms, will be discussed. Vibration spectrum analysis will be utilised for the solution of resonance, instability, and gear and blade problems. Campbell (Spoke) diagrams and Critical Speed maps will be derived and used for the solution of vibration and Rotor Dynamic problems. The design and performance of Squeeze-Film Damper Bearings for overcoming many of the problems associated with machine unbalance and critical speeds, will be covered.
  4. Combustors and Fuels
    A description of combustor types, chamber design, fuel atomisation, ignition and combustor arrangements will be presented. Also discussed will be the constraints imposed by fuels on the design and operation of the hardware. The wide spectrum of fuels, both gaseous and liquid, is examined. An overview of fuel treatment and additives will be made.
  5. Performance Analysis
    Basic thermodynamic aspects of stationary Gas Turbines. Design and off-design operation. Influence of site effects on typical performance maps. Variable geometry compressor and turbine status.
  6. Performance Analysis for Problem Detection
    The fundamental concepts of performance analysis as a tool for saving energy costs are discussed. Basic and applied thermodynamics will be reviewed for gas turbines. The use of performance data to pinpoint problem areas will be discussed. Diagnostics related to fouling, nozzle erosion, bowing surge, choke, etc. will be covered. Meaningful trending methods will also be discussed.
  7. Gas Path Analysis for Stationary Gas Turbines – Status
    Simulation of degraded Gas Turbines, derivation and application of fault coefficient matrix, fault trees and other techniques. Implications for component life and emissions.
  8. Gas Turbine Fouling
    The causes, effects and detection of fouling in axial compressors will be covered including aero thermodynamic effects, effects on surge margin, intake distortion and blading problems. Filtration and control techniques will be covered.
  9. Gas Turbine Repair
    The techniques of inspection and repair of gas turbines are described in detail, including NDT techniques, cleaning, plating, heat treatment, welding, etc.
  10. Maintenance
    Case histories of various types of failures and maintenance problems of onshore and offshore gas turbine compressor installations are discussed. Maintenance techniques using bore scope and spectrum analysis including acoustic monitoring are discussed. Techniques for checking and conducting repairs on impellers, diffusers, bearings, couplings, and foundation repair are emphasised.
  11. Special Considerations for CHP Gas Turbines
    This section will cover special considerations in design, operation and maintenance of turbines and associated equipment on Cogeneration Services. Several cases will be covered. Off design operation effects on HRSG, STTG Cycles and evaporate cooling will be covered.

INSTRUCTOR :    Ir. Maridjo,MT. and Team

INVESTATION PRICE/PERSON :   

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Modul Training
2.    Flashdisk Training berisi materi training
3.    Sertifikat
4.    ATK: NoteBook dan Ballpoint
5.    T-Shirt
6.    Ransel
7.    Foto Training
8.    Ruang Training dengan fasilitas Full AC dan multimedia
9.    Makan siang dan 2 kali coffeebreak
10.    Instruktur yang Qualified
11.    Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balongan pertamina, PT. Indocement, some PLTA, some hotels, PT.Pupuk Kujang, PT.Bio Farma, BPPT, PT. Bintang Agung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Steam Generator and Turbine : Operation And Maintenance (BANDUNG)

Jadwal Training

Steam Generator and Turbine : Operation And Maintenance (BANDUNG) TRAINING TIME  :    18 Jul 2016-21 Jul 2016 23 Aug 2016-26 Aug 2016 06 Sep ... Baca Selengkapnya

Steam Generator and Turbine : Operation And Maintenance (BANDUNG)

Jadwal Training

Steam Generator and Turbine : Operation And Maintenance (BANDUNG)

TRAINING TIME  :   

  • 18 Jul 2016-21 Jul 2016
  • 23 Aug 2016-26 Aug 2016
  • 06 Sep 2016-09 Sep 2016
  • 04 Oct 2016-07 Oct 2016
  • 21 Nov 2016-24 Nov 2016
  • 27 Dec 2016-30 Dec 2016

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :    4 hari

PENDAHULUAN:
Turbin uap merupakan salah satu jenis penggerak mula yang banyak digunakan di dalam industri, antara lain sebagai penggerak mula generator listrik, pompa dan kompresor, serta industri proses. Hal yang menjadi pertimbangan dalam penggunaaan turbin uap yaitu sumber panas yang digunakan untuk menguapkan air bisa dari bahan bakar gas, cair, dan padat, efisiensi turbin uap lebih besar daripada turbin gas, dan perawatan yang mudah. Permasalahan yang muncul pada turbin uap adalah distribusi kecepatan dan distribusi tekanan disekitar nosel dan sudu gerak, penurunan entalpi yang terlalu besar yang mengakibatkan kecepatan tangensial pada ujung sudu pun akan menjadi sangat besar, dan material juga memegang peranan penting sebagai kendala atas kecepatan tangensial yang cukup tinggi. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Operasi dan Perawatan Generator dan Turbin Uap.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ?:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perawatan generator dan turbin uap pada power plant dan industri minyak.

TUJUAN TRAINING :
Setelah mengikuti training ini diharapkan para peserta memiliki :
1.    Pemahaman tentang pengetahuan operasi generator dan turbin uap.
2.    Keahlian dalam perawatan generator dan turbin uap.

CAKUPAN MATERI TRAINING :
1.    Steam Generator/Boiler
•    Introduction of thermodynamics.
•    Fundamental of external combustion system and evaporation.
•    Steam table and steam diagram
•    Mechanical components and its function
•    Electrical components and its functions.
•    Safety system and equipment.
•    Steam system, fuel and air system, and flue gas
•    Operation and control.
•    Trouble shooting and maintenance.
•    Water treatment.

2.    Superheater
•    Operation and control.

3.    Steam Turbine
•    Principles of energy conversion in steam turbine.
•    Mechanical component and electrical component and its function.
•    Turbine application in power generation.
•    Operation and control
•    Calculation of energy in steam turbine.
•    Trouble shooting, inspection and maintenance.

4.    Steam Energy Applications
•    Nozzle
•    Ejector (Vacuum pump).

INSTRUCTOR :    Ir. Maridjo,MT. and Team

INVESTATION PRICE/PERSON :   
1.    Rp 7.950.000/person (full fare)  or
2.    Rp 7.750.000/person (early bird, payment 1 week before training)  or
3.    Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Modul Training
2.    Flashdisk Training berisi materi training
3.    Sertifikat
4.    ATK: NoteBook dan Ballpoint
5.    T-Shirt
6.    Ransel
7.    Foto Training
8.    Ruang Training dengan fasilitas Full AC dan multimedia
9.    Makan siang dan 2 kali coffeebreak
10.    Instruktur yang Qualified
11.    Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balongan pertamina, PT. Indocement, some PLTA, some hotels, PT.Pupuk Kujang, PT.Bio Farma, BPPT, PT. Bintang Agung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2026

Info Seminar | Jadwal Seminar