Corrosion Management (YOGYAKARTA)

Jadwal Training

Corrosion Management (YOGYAKARTA) BACKGROUND: This course will cover the main causes of corrosion in upstream oil and gas operations, as well as monitoring and mitigation ... Baca Selengkapnya

Corrosion Management (YOGYAKARTA)

Jadwal Training

Corrosion Management (YOGYAKARTA)

BACKGROUND:
This course will cover the main causes of corrosion in upstream oil and gas operations, as well as monitoring and mitigation methods. The various corrosion mechanisms give rise to a number of different forms of corrosion damage which will all be considered. Participants will estimate the corrosivity of a given environment through analysis of the chemical and physical characteristics of the system. You will review approaches to selecting materials and coatings for corrosion resistance for different conditions and applications, including the use of NACE. You will be introduced to CP surveys, selecting the CP system type, estimating current requirements and the design principles of simple cathodic protection systems. There will be opportunity to select and utilize corrosion inhibitors for different systems and you will learn how to select and apply corrosion monitoring techniques to create an integrated monitoring program. The course content is based on a field facilities engineering point of view as opposed to a more narrowly specialized corrosion engineering or chemistry viewpoint. This course provides an appropriate balance of necessary theory and practical applications to solve/mitigate corrosion related problems.

TRAINING OUTCOME:
After completion of the course, participant will understand about

  1. The basics of corrosion chemistry
  2. The main corrosion mechanisms occurring in oil and gas production/processing systems
  3. The different types of damage caused by corrosion
  4. Materials selection for corrosion prevention
  5. Some methods for conducting cathodic protection (CP) surveys
  6. Items to consider in corrosion inhibitor selection
  7. Key advantages and disadvantages of the various corrosion monitoring methods
  8. Where the main locations of corrosion concern occur within oil production systems, gas processing facilities (including amine units), and water injection systems

WHO SHOULD ATTEND THIS TRAINING?:
Managers, engineers, chemists, and operators needing to understand corrosion and its control management in oil and gas production and processing.

TRAINING MATERIAL OUTLINE:

  1. Fundamentals of corrosion theory
  2. Major causes of corrosion (O2, CO2, H2S, microbiologically influenced corrosion)
  3. Forms of corrosion damage
  4. Materials selection
  5. Protective coatings & linings
  6. Cathodic protection
  7. Corrosion inhibitors
  8. Corrosion monitoring and inspection
  9. Corrosion in gas processing facilities
  10. Corrosion in water injection systems
  11. Corrosion management strategy and life-cycle costs

INSTRUCTOR :Dr.Ir. Paryana Puspaputra, M.Eng., and Team

VENUE : Yogyakarta (Jambuluwuk Hotel/ Ibis Malioboro Hotel/ Ibis Styles Hotel/ Cavinton Hotel/ Harper Hotel/ Melia Purosani Hotel/ Grand Zuri Hotel)

TRAINING DURATION :4 days

TRAINING TIME :  

  • 29 Jun 2015-02 Jul 2015
  • 10 Aug 2015-13 Aug 2015
  • 15 Sep 2015-18 Sep 2015
  • 26 Oct 2015-29 Oct 2015
  • 24 Nov 2015-27 Nov 2015
  • 07 Dec 2015-10 Dec 2015

INVESTMENT PRICE/PERSON :

  1. Rp.7.950.000/person (full fare) or
  2. Rp.7.750.000/person (early bird, payment 1 week before training) or
  3. Rp.7.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Compressor Operation Maintenance & Troubleshooting (YOGYAKARTA)

Jadwal Training

Compressor Operation Maintenance & Troubleshooting (YOGYAKARTA) TRAINING TIME :   27 Jul 2015-30 Jul 2015 03 Aug 2015-06 Aug 2015 08 Sep 2015-11 Sep 2015 19 ... Baca Selengkapnya

Compressor Operation Maintenance & Troubleshooting (YOGYAKARTA)

Jadwal Training

Compressor Operation Maintenance & Troubleshooting (YOGYAKARTA)

TRAINING TIME :  

  • 27 Jul 2015-30 Jul 2015
  • 03 Aug 2015-06 Aug 2015
  • 08 Sep 2015-11 Sep 2015
  • 19 Oct 2015-22 Oct 2015
  • 17 Nov 2015-20 Nov 2015
  • 30 Nov 2015-03 Dec 2015

VENUE :   Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

TRAINING DURATION :    4 days

INTRODUCTION:
Production continuity is a keyword in any process of production activities, in which power system play important role to keep all of the operation.
Compressor is known for its capability to store energy in the form of air pressure. In industrial application, compressors are completed with auxiliaries to control the air flow, pressure, and actuators. Compressors will become advantage if it’s operated and maintained properly. Compressors principles and their system performance however should be understood by operator and any person who get involved with them to increase performance of the operation, maintenance, safety, etc.

TRAINING OUTCOME:
In this training, compressors will be discussed from its principle, application, components and its maintenance. Moreover, their control system to improve performance and safety will also be introduced. After completion of this training participant will understand about the basic principle, application and control system that will help them for improving safety and problem solving on operation and maintenance activities.

TRAINING MATERIAL OUTLINE:
1.    FUNDAMENTALS:
a.    Explain the theory of air/gas compression.
b.    Describe how altitude and moisture affects the compression of air.
c.    Describe the principles of operation of positive displacement and dynamic compressors.
d.    Define air compression terminology such as absolute and gauge pressures, compressor
e.    Displacement and compressor capacity, free air, volumetric efficiency, single and double acting, single and multistage.
f.    Given relative data, perform basic calculations to solve for compressor displacement and compressor volumetric efficiency.

2.    RECIPROCATING COMPRESSORS:  
a.    State and describe the different types of single and multi-stage reciprocating compressors, state the function of the various compressor parts, including valves.
b.    Describe the methods employed to cool air or gas during compression.
c.    List and describe the different types of prime movers used for compressors.

3.    ROTARY COMPRESSORS:  
Describe the principles of operation, their application, volume and pressure capabilities, methods of regulation, advantages and disadvantages of the following types of (positive displacement) rotary compressors:
a.    sliding vane
b.    the lobe type
c.    roots type
d.    screw
e.    liquid-sealed

4.    CENTRIFUGAL AND AXIAL COMPRESSORS:  
a.    Describe the design and operation of the volute and diffuser type centrifugal compressors.
b.    Describe the design and operation of the single-stage double-flow and the four-stage centrifugal compressors.
c.    Describe the design and operation of an axial flow compressor.
d.    State the causes and remedies of compressor surging.

5.    COMPRESSOR SYSTEM AUXILIARIES:  
a.    Describe the design and operation of intercoolers and aftercoolers; state their location within the system, describe the maintenance requirements of these components.
b.    State the need for air receivers, their preferred location, and the inspection and maintenance requirements as per Code.
c.    Describe the use of air filters, list and provide a description of the different types commonly used.

6.    OPERATION, CONTROL AND MAINTENANCE:  
a.    Explain the following methods employed to control compressor output:
?    Start/stop, dual control
?    Variable-speed
?    Suction line valve
?    Suction or discharge valve
?    Adjustable stroke
?    Variable clearance volume
b.    List and describe the operation of the various types of controllers and safety devices used in a compressed air system. Describe how these devices can be tested while system is in operation.
c.    Describe the internal and external methods of compressor lubrication.
d.    State the various operational checks done by an operator on both the compressor(s) and the compressed air/gas system to ensure safe and efficient operation.
e.    State the preventive maintenance requirements of compressors, auxiliaries, piping and receivers.
f.    State the probable causes of compressed air/gas compressor, receiver or pipeline explosions.

7.    ACT, REGULATIONS AND CODES:  
The candidate is expected to be able to locate information relating to the staffing, operation, maintenance, inspection, and testing of the compressor plant and its equipments.

8.    SAFETY:  
The candidate is expected to be able to fully explain the dangers associated with the operation of a compressor plant and all its components, and state the precautions to be taken to minimize or prevent such dangers.

WHO SHOULD ATTEND THIS TRAINING?:
The training can be important for all personnel involved with the design, installation, maintenance, operation and servicing of compressor and their basic systems.

INSTRUCTOR :   Dr.Ir. Paryana Puspaputra, M.Eng., and Team

INVESTATION PRICE/PERSON :   
1.    Rp 7.950.000/person (full fare)  or
2.    Rp 7.750.000/person (early bird, payment 1 week before training)  or
3.    Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Centrifugal Compressor Performance & Condition Evaluation (YOGYAKARTA)

Jadwal Training

Centrifugal Compressor Performance & Condition Evaluation (YOGYAKARTA) TRAINING TIME :   06 Jul 2015-09 Jul 2015 24 Aug 2015-27 Aug 2015 01 Sep 2015-04 Sep 2015 ... Baca Selengkapnya

Centrifugal Compressor Performance & Condition Evaluation (YOGYAKARTA)

Jadwal Training

Centrifugal Compressor Performance & Condition Evaluation (YOGYAKARTA)

TRAINING TIME :  

  • 06 Jul 2015-09 Jul 2015
  • 24 Aug 2015-27 Aug 2015
  • 01 Sep 2015-04 Sep 2015
  • 05 Oct 2015-08 Oct 2015
  • 10 Nov 2015-13 Nov 2015
  • 14 Dec 2015-17 Dec 2015

VENUE :   Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

TRAINING DURATION :    4 days

TRAINING DESCRIPTION:
The degree to which compressors are maintained today ranges from “wait until destruction” to a “complete” but extravagant program. This seminar presents maintenance strategies that are economical and yet assure required compressor availability. Participants review the fundamentals of compressors and the techniques for maintaining them. Participants examine proper methods of parts repair techniques as well as diagnostic tests for identifying and determining problems. Participants will study in depth preventive maintenance programs including the purpose of such programs and their planning and implementation. The seminar will introduce new concepts and approaches through actual case studies, which will enable you to successfully implement new ideas.

WHO SHOULD ATTEND THIS TRAINING?:
This course is designed for plant and maintenance engineers, maintenance managers and supervisors and compressor specialists. It should be valuable to senior maintenance mechanics and those who are involved with compressors, their operation and their maintenance.

TRAINING MATERIAL OUTLINE:
1.    Compressor Types
a.    Centrifugal
b.    Helical screw
c.    Reciprocating
d.    Application ranges
e.    Application ranges
f.    Short cut selection methods

2.    Turbo compressor Maintenance
a.    Overview of alignment methods
b.    Predictive versus preventive strategies
c.    Run-length extension surveys
d.    Machinery turnaround planning

3.    Reciprocating Compressor Operation
a.    Lubrication systems
b.    Valves, valve problems and rebuilding
c.    Packing and packing problems
d.    Controls and cooling systems

4.    Saving Compressor Air Cost While Increasing Efficiency
a.    The impact of artificial demand
b.    Today’s compressor control
c.    Realistic leak management
d.    Stabilizing a compressed air system
e.    Compressed air dryers

5.    Reciprocating Compressor Preventive Maintenance
a.    Types of maintenance programs
b.    Purpose of preventive maintenance
c.    Inspection and inspection forms
d.    Vendor and contractor requirements
e.    Planning and implementation

6.    Overhaul and Repair of Reciprocating Compressors
a.    Methods of repair and overhaul
b.    Alignment and piston rod run out
c.    Foundation problems and repair
d.    Component repair and rebuilding

7.    Troubleshooting Compressor Problems
a.    Basic approaches to compressor troubleshooting
b.    Typical problems and solutions
c.    Diagnostic test
d.    Examples from recent failure incidents

INSTRUCTOR :   Dr.Ir. Paryana Puspaputra, M.Eng., and Team

INVESTATION PRICE/PERSON :     
1.    Rp 7.950.000/person (full fare)  or
2.    Rp 7.750.000/person (early bird, payment 1 week before training)  or
3.    Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Industrial Automation & Control (YOGYAKARTA)

Jadwal Training

Industrial Automation & Control (YOGYAKARTA) Tanggal 28 Jul 2015-31 Jul 2015 04 Aug 2015-07 Aug 2015 31 Aug 2015-03 Sep 2015 20 Oct 2015-23 Oct ... Baca Selengkapnya

Industrial Automation & Control (YOGYAKARTA)

Jadwal Training

Industrial Automation & Control (YOGYAKARTA)

Tanggal

  • 28 Jul 2015-31 Jul 2015
  • 04 Aug 2015-07 Aug 2015
  • 31 Aug 2015-03 Sep 2015
  • 20 Oct 2015-23 Oct 2015
  • 09 Nov 2015-12 Nov 2015
  • 01 Dec 2015-04 Dec 2015

Tempat
Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

TRAINING DURATION
4 days

TRAINING DESCRIPTION:
A basic understanding of standardized signals and the many ways they are utilized will give more confident in looking at automation/system controls. This popular course lecture is to provide an overview of industrial measurement and control. Technicians, engineers, and managers are provided with a foundation for communication with other control system professionals.

TRAINING OUTCOMES:

  1. Communicate with measurement and control professionals
  2. Discuss the role of measurement and control in industrial processes
  3. Differentiate between continuous, batch, and discrete control
  4. Discuss and apply the most common methods and devices used in temperature, pressure, level, and flow measurement
  5. List control valves in a feedback control loop
  6. Discuss the fundamentals of process control
  7. Differentiate between control system architectures including single loop controllers, Distributed Control System (DCS), and Programmable Logic Controllers (PLC)
  8. Discuss trends in measurement and control technology

TRAINING MATERIAL OUTLINES:

  1. Concepts of Process Control: Typical Industries | Definitions  | Continuous vs. Batch | Feedback Loop
  2. Industrial Measurement Systems: Process Measurement | Standard Signals | Instrument Performance Terminology | Repeatability and Accuracy | Zero, Span, and Linearity Errors | Calibration Chart
  3. Pressure Measurements: Concepts | Instruments | Differential Pressure Measurement | Pascal’s Law | Absolute and Atmospheric Pressure | Relationship between Pressure and Column of Liquid | Hydrostatic Head Pressure | U-Tube and Well Manometers | Bourdon Pressure Gage | Spiral and Helical Elements | Bellows and Diaphragm Elements
  4. Level Measurement: Dip Stick Level Measurement | Basic Sight Glasses | Float and Cable Arrangements | Ultrasonic | Capacitance Probe | Radiation Point | Rotating Paddle | Radar Level System | Interface Measurement | Hydrostatic Pressure | Open Tank Level | Zero Suppression/Elevation | Air Bubbler System
  5. Flow Measurement: Types of Flow | Reynolds Number | Differential Pressure Flowmeters | Concentric and Eccentric Orifaces | Flow Nozzle | Venturi and Pitot Tubes | Target Flowmeter | Rotameter or Variable Area Meter | Magnetic, Vortex, Turbine, and Ultrasonic Flowmeters | Doppler Effect | Flow Tube Vibration and Twist | Coriolis and Thermal Mass Flowmeters | Positive  Displacement Flowmeters | Rotary Vane, Oval Gear, and Nutating Disc Designs | Open Channel Flow Measurement | Weirs | Parshall Flume | Flowmeter Selection
  6. Temperature Measurement: Temperature Scales | Liquid-in-Glass, Filled Bulb, and Bimetallic Thermometers | Resistance Temperature Detectors (RTDs) | Reference Junction Compensation | Thermocouplers | Immersion and Insertion Lengths | Thermowells | Thermistors
  7. Control Valves: Types | Valve Characteristics | Inherent Flow Characteristics | Actuators | Air to Extend/Retract | Positioners | I/P Transducer
  8. Feedback Control Strategies: Control Hierarchy | Process Dynamics | Lags | Dead Time | Strategies | Direct/Reverse Acting | On-Off Control | Controller Modes | Proportional Control/Action | Level Control Offset | Integral and Derivative Action | Tuning
  9. Advanced Control Strategies: Control Hierarchy | Cascade Control | Applications: With and Without Cascade | Ratio Control | Feedforward Control
  10. Control System Hardware: Pneumatic Controller | Electronic Controller | Single Loop Controller | Distributed Control System (DCS) | Programmable Logic Controller (PLC) | Personal Computers for Control
  11. Smart Field Devices: Current Practice | Typical Smart D/P Transmitter | Smart Temperature Transmitter System | Benefits | Innovative Applications | Fieldbus Foundation – H1 & H2 | How is Fieldbus Different? | Fieldbus Control System (FCS)

INVESTATION PRICE/PERSON :     
1.    Rp 7.500.000/person (full fare)  or
2.    Rp 7.250.000/person (early bird, payment 1 week before training)  or
3.    Rp 6.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Basic Vibration Analysis (YOGYAKARTA)

Jadwal Training

Basic Vibration Analysis (YOGYAKARTA) TRAINING TIME :   30 Jun 2015-03 Jul 2015 11 Aug 2015-14 Aug 2015 28 Sep 2015-01 Oct 2015 27 Oct 2015-30 ... Baca Selengkapnya

Basic Vibration Analysis (YOGYAKARTA)

Jadwal Training

Basic Vibration Analysis (YOGYAKARTA)

TRAINING TIME :  

  • 30 Jun 2015-03 Jul 2015
  • 11 Aug 2015-14 Aug 2015
  • 28 Sep 2015-01 Oct 2015
  • 27 Oct 2015-30 Oct 2015
  • 02 Nov 2015-05 Nov 2015
  • 08 Dec 2015-11 Dec 2015

VENUE :   Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

TRAINING DURATION :    4 days

PENDAHULUAN:
Getaran pada peralatan mekanik merupakan fenomena alam. Fenomena tersebut menjadi menarik pada saat diketahui bahwa setiap komponen mekanik memiliki karakteristik yang unik, sehingga antara satu komponen dengan yang lain berbeda. Perkembangan kebutuhan yang menuntut kegiatan produksi tanpa henti membawa pada tuntutan keterdugaan kegiatan perawatan mesin. Kondisi mesin diharapkan selalu terpantau tanpa terjadinya ganggiuan pada proses produksinya, sehingga berkembang teknik pemantauan kondisi mesin dengan memanfaatkan keunikan sifat-sifat getaran setiap komponen mesin tersebut.
Pelatihan ini akan menjelaskan sifat-sifat dasar pada peralatan mekanik sehingga memiliki karakteristik getaran yang unik. Penjelasan berbasis pada fenomena alami diharapkan dapat memberikan kemudahan dalam memahami rumusan matematik yang biasa muncul pada analisis enjinering.

SASARAN TRAINING:
Peserta dapat memahami:

  • Dasar-dasar getaran mekanik
  • Dasar dasar pengukuran dan alat ukur getaran mekanik
  • Cara kerja peralatan pengukuran getaran
  • Prinsip sinyal domain waktu dan domain frekuensi
  • Prinsip FFT
  • Dasar-dasar Signature analysis

CAKUPAN MATERI TRAINING:
1.    Dasar-dasar getaran mekanik:
a.    Getaran mekanik dalam kehidupan sehari-hari
b.    Getaran sebagai fenomena alam
c.    Frekuensi alami, resonansi, putaran kritis, dan modus getar.
d.    Balancing statik dan dinamik
e.    Prinsip kerja mesin balancing

2.    Dasar-dasar pengukuran getaran:
a.    Dasar-dasar pengukuran
b.    Jenis-jenis sensor getaran
c.    Pengkondisi sinyal, filter, amplifier, integrator dan differensiator
d.    Pengukuran domain waktu dan domain frekuensi

3.    Dasar-dasar analisis sinyal:
a.    Jenis-jenis sinyal getaran pada mesin rotasi
b.    Dasar-dasar FFT
c.    Signature analysis

INSTRUCTOR :   Dr.Ir. Paryana Puspaputra, M.Eng., and Team

INVESTATION PRICE/PERSON : 
1.    Rp 7.950.000/person (full fare)  or
2.    Rp 7.750.000/person (early bird, payment 1 week before training)  or
3.    Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Integrated Corporate Control (YOGYAKARTA)

Jadwal Training

Integrated Corporate Control (YOGYAKARTA) JADWAL 4 – 6 Agustus  2015 18 – 20  Agustus 2015 1 – 3 September 2015 8 – 10  September 2015 ... Baca Selengkapnya

Integrated Corporate Control (YOGYAKARTA)

Jadwal Training

Integrated Corporate Control (YOGYAKARTA)

JADWAL
4 – 6 Agustus  2015
18 – 20  Agustus 2015
1 – 3 September 2015
8 – 10  September 2015

LOKASI
Yogyakarta

WAKTU
08.30-16.00 WIB

BIAYA
Yogyakarta >>IDR 6.500.000,- (Non-Residential) | Minimal kuota 2 – 3 peserta l Diskon untuk pengiriman 3 peserta dari perushaan yang sama

DESKRIPSI
Saat ini organisasi sangat concern terhadap 4 (empat) hal yaitu Control, Risk Management, Governance & Assurance. Perkembangan ilmu pengetahuan tentang Internal Control dalam suatu organisasi sangat pesat. Hal ini terkait dengan kelemahan Internal Control  di organisasi yang sering dimanfaatkan oleh pihak internal maupun eksternal organisasi untuk melakukan kecurangan (fraud). Pasca krisis moneter beberapa tahun yang lalu telah memberi pelajaran betapa pentingnya system control yang efektif dan corporate governance harus dilakukan demi menyelamatkan organisasi (perusahaan). Oleh karena itu Internal Control Systems harus mampu mengadopsi nilai-nilai dari aspek manusia dan lingkungan dalam komponen yang memungkinkan para auditor dapat bekerjasama dengan auditeee (manajemen operasional) dalam mengidentifikasi risiko yang dihadapi suatu organisasi, dalam hal inilah maka Control Self Assessment (CSA) menjadi alternatif yang paling relevan untuk diimplementasikan.

PESERTA

  • Auditor Internal / Satuan Pengawasan Intern.
  • Auditor Eksternal / Auditor yang bekerja di Kantor Akuntan Publik
  • Staf di Divisi GCG & Risk Management.
  • Controller.
  • Sekretaris Perusahaan.
  • Komite Audit
  • Bagian kredit
  • Compliance
  • Manajemen Operasional pada Divisi / Unit Kerja.(Divisi Akuntansi keuangan, Divisi Akuntansi Manajemen, Divisi Corporate Finance, Divisi Cost Accounting dll)

MATERI  TRAINING

  • Corporate Control : The Overview
  • Relationship between Risk, Governance and Corporate Control
  • “Hard” and “Soft” Controls
  • Internal Corporate Control Principles
  • Entity-wide Evaluation & Activity-level Evaluation
  • Internal Corporate Control : Systems, Structures & Components
  • Integrated Internal Corporate Control Framework
  • Internal Corporate Control Questionnaire
  • Monitoring & Reporting of Internal Corporate Control.
  • Control Self Assesment (CSA)
  • Implementation of Internal Corporate Control.: Case Study

METODE
Presentation, discussion, Case study, Evaluation, Pre test & post test

FASILITAS
Hotel Berbintang, Sertifikat, training kit, Modul ( hard & soft copy ), lunch, coffee break, Souvenir, makan malam, transportasi antar jemput

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Principles And Maintenance Of Trafo System (YOGYAKARTA)

Jadwal Training

Principles And Maintenance Of Trafo System (YOGYAKARTA) JADWAL 11 – 13  Agustus  2015 25 – 27 Agustus 2015 8 – 10    September 2015 15 – ... Baca Selengkapnya

Principles And Maintenance Of Trafo System (YOGYAKARTA)

Jadwal Training

Principles And Maintenance Of Trafo System (YOGYAKARTA)

JADWAL
11 – 13  Agustus  2015
25 – 27 Agustus 2015
8 – 10    September 2015
15 – 17  September 2015

LOKASI
Bali

WAKTU
08.30-16.00 WIB

BIAYA
Yogyakarta >>IDR 8.500.000,- (Non-Residential) | Minimal kuota 4 peserta l Diskon untuk pengiriman 3 peserta dari perushaan yang sama

DESKRIPSI
Dengan semakin mahalnya harga-harga barang elektrikal maupun suku cadang, maka pemeliharaan yang rutin dan teliti guna menjaga keawetan sistem elektrikal mutlak harus dilakukan. Tindakan ini dapat memperpanjang umur pakai sistem elektrikal tersebut. Dengan demikian, pembelian baru barang-barang elektrik merupakan alternatif yang terakhir. Dengan melakukan pemeliharaan secara berkala dan terjadual, maka kerusakan sistem elektrikal dapat diketahui secara dini, sehingga kerusakan yang lebih parah dan lebih fatal dapat dihindari.

PESERTA
Pelatihan ini diberikan pada para teknisi, operator maupun supervisor yang bekerja dibidang ketenagalistrikan di industri terutama dibidang pembangkitan dan Distribusi Tenaga Listrik.

MATERI  TRAINING

  • Pedoman Umum Operasional & pemeliharaan Sistem Electrical
  • Operasional & Pemeliharaan System Box Connecting Daya Listrik
  • Operasional & Perawatan Sistem Kelistrikan Bangunan Gedung dan Industri
  • Operasional & Pemeliharaan Scada Pada System Distribusi Listrik
  • Cahaya : Arus Cahaya, Kepadatan Cahaya, Tingkat Kuat Penerangan, Kuat penerangan Pada Bidang Tegak Lurus, Luminasi, Perhitungan Jumlah Lampu, Penerangan alami siang hari, ketentuan dasar langit perencanaan
  • Operasional & Pemeliharaan Instalasi Listrik Tegangan Rendah dan Proteksinya
  • Jadwal Pemeliharaan transformatir tenaga
  • Operasional & Pemeliharaan rangkaian kontraktor control listrik
  • Operasional & peralatan Penangkal petir dan pemeliharaanya
  • Studi Kasus

METODE
Presentation, discussion, Case study, Evaluation, Pre test & post test

FASILITAS
Hotel Berbintang, Sertifikat, training kit, Modul ( hard & soft copy ), lunch, coffee break, Souvenir, makan malam, transportasi antar jemput

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Boiler : Operation, Maintenance and Troubleshooting (YOGYAKARTA)

Jadwal Training

Boiler : Operation, Maintenance and Troubleshooting (YOGYAKARTA) JADWAL 11 – 13  Agustus  2015 25 – 27 Agustus 2015 8 – 10    September 2015 15 – ... Baca Selengkapnya

Boiler : Operation, Maintenance and Troubleshooting (YOGYAKARTA)

Jadwal Training

Boiler : Operation, Maintenance and Troubleshooting (YOGYAKARTA)

JADWAL
11 – 13  Agustus  2015
25 – 27 Agustus 2015
8 – 10    September 2015
15 – 17  September 2015

LOKASI
Bali

WAKTU
08.30-16.00 WIB

BIAYA
Reguler Training
Yogyakarta >>IDR 8.500.000,- (Non-Residential) | Minimal kuota 4 peserta l Diskon untuk pengiriman 3 peserta dari perushaan yang sama

DESKRIPSI
Boiler atau ketel uap adalah suatu bejana/wadah yang di dalamnya berisi air atau fluida lain untuk dipanaskan. Energi panas dari fluida tersebut selanjutnya digunakan untuk berbagai macam keperluan, seperti untuk turbin uap, pemanas ruangan, mesin uap, dan lain sebagainya. Secara proses konversi energi, boiler memiliki fungsi untuk mengkonversi energi kimia yang tersimpan di dalam bahan bakar menjadi energi panas yang tertransfer ke fluida kerja

PESERTA

  • Mechanical, Construction Engineer
  • Operators, Technicians, Maintenance Personnel who involved in installation, testing, and maintenance of boiler
  • Experienced professionals who want to refresh or broaden their knowledge of boiler

MATERI  TRAINING
1.    Prinsip kerja boiler
2.    Komponen boiler dan alat pengaman
3.    Proses penguapan air
4.    Bahan bakar
5.    Proses pembakaran
6.    Sistem bahan bakar
7.    Sistem udara dan gas asap (flue gas)
8.    Sistem tarikan api (draft system)
9.    Sistem air dan uap
10.    Sistem alat pengaman dan regulasi
11.    Operasi boiler (preparation, start-up and shut-down)
12.    Tindakan aman (never and always)
13.    Water treatment
14.    Kemerosotan Boiler
15.    Perawatan dan management perawatan
16.    Troubleshooting
17.    Diskusi

METODE
Presentation, discussion, Case study, Evaluation, Pre test & post test

FASILITAS
Hotel Berbintang, Sertifikat, training kit, Modul ( hard & soft copy ), lunch, coffee break, Souvenir, makan malam, transportasi antar jemput

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing
Informasi Seminar Training

SAP 2000 for Steel Dynamic Analysis & TEKLA Structure

Jadwal Training

SAP 2000 for Steel Dynamic Analysis & TEKLA Structure (Yogyakarta, Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak) Jadwal & Tempat : ... Baca Selengkapnya

SAP 2000 for Steel Dynamic Analysis & TEKLA Structure

Jadwal Training

Informasi Seminar Training

SAP 2000 for Steel Dynamic Analysis & TEKLA Structure

(Yogyakarta, Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak)

Jadwal & Tempat :

  • Selasa-Rabu 21 – 23 Juli 2015
  • Selasa-Rabu 11 – 13 Agustus 2015
  • Selasa-Rabu 8 – 10 September 2015
  • Kamis- Sabtu 15-17 Oktober 2015
  • Selasa-Rabu 10 – 12 November 2015
  • Selasa-Rabu 8 – 10 Desember 2015

08.00-16.00

Yogyakarta, Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

Investasi:

  • Investasi pelatihan selama 3 (tiga) hari ini adalah senilai Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
  • Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).
  • Untuk pelaksanaan di kota lain, harga menyesuaikan dengan jumlah peserta.

OVERVIEW
SAP 2000 & TEKLA Structure merupakan software  3D Building Information Modeling (BIM) yang dapat digunakan dalam industri jasa konstruksi untuk desain baja dan beton. Aplikasi ini  memberikan kemudahan  dalam mendesain dan memanaje  secara akurat dan detail  sebuah model 3D walaupun material atau strukturnya sangat kompleks. SAP 2000 dan Tekla Structures dapat digunakan dalam keseluruhan proses mulai dari tahap konseptual desain,Fabrikasi dan manajemen konstruksi. Training ini akan mempelajari tentang bagaimana mengoperasikan SAP 2000 dan TEKLA Structure untuk desain baja dalam industri konstruksi.

Tujuan
Peserta dapat mengoperasikan SAP 2000 dan TEKLA Strukture untuk desain dan manajemen 3D Objek  dalam industri baja konstruksi.

Sasaran
Engineer  dan Planner bidang konstruksi

TOPIK / MATERI

  1. Overview SAP dan TEKLA Struktur : program tools and Features
  2. Basic Design Structure
  • Basic Design Structure and Concept : Terminology and concept
  1. Getting Started
  • The SAP2000 Screen
  • Main Window
  • Menu Bar
  • Toolbars
  • Status Bar
  • Viewing Options
  • 2-D and 3-D Views
  • Perspective, Pan, Zoom, and 3-D Rotate
  • Element View Options
  • Drawing Objects
  • Editing
  • Assigning
  • Analyzing
  • Displaying
  1. The Structural Modelling
  • Units
  • Objects, Elements and Groups
  • Coordinate Systems and Grids
  • Properties
  • Load Cases
  • Analysis Cases
  • Combinations
  • Design Settings
  • Output and Display Definitions
  1. Analysis and Design Results
  • Analysis Results
  • Design Results
  1. Project Case
  • Project Case and Summary

METODE PELATIHAN
Presentation, Discuss, Case Study, Evaluation, Simulation

TRAINER
Widarto Sutrisno, ST, MT  & Team
(Staf Pengajar, Trainer & Konsultan dalam bidang Building and Construction, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA).

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electrical Test Instrumentation dan Sistem Pengukuran (Measurements) BANDUNG

Jadwal Training

Electrical Test Instrumentation dan Sistem Pengukuran (Measurements) BANDUNG CAKUPAN MATERI TRAINING: Pendahuluan Sistem Pengukuran (Measurements) Dasar Sistem Pengukuran Kepercayaan pada hasil yang ditampilkan alat ukur ... Baca Selengkapnya

Electrical Test Instrumentation dan Sistem Pengukuran (Measurements) BANDUNG

Jadwal Training

Electrical Test Instrumentation dan Sistem Pengukuran (Measurements) BANDUNG

CAKUPAN MATERI TRAINING:

  1. Pendahuluan
  2. Sistem Pengukuran (Measurements)
    1. Dasar Sistem Pengukuran
    2. Kepercayaan pada hasil yang ditampilkan alat ukur
    3. Gangguan pada alat ukur
    4. Kesalahan pada displai alat ukur
  3. Sistem Instrumentasi Elektrik
    1. Rangkaian Jembatan
    2. Multimeter
    3. Potensi ometer
    4. Counter
    5. Osiloskop
  4. Sensor Gerak sebagai dasar Sistem Tes Instrumentasi Elektrik
    1. Sensor gerak menjadi perubahan resistansi: Strain gage, potensi ometer, dll
    2. Sensor gerak menjadi perubahan kapasitansi: Kapasitansi pick-up, dll
    3. Sensor gerak menjadi perubahan induktansi: LVDT (Linear Variable Differential Transformer), Inductance pickup, dll
  5. Instrumentasi untuk deteksi Variabel Fisika
    1. Instrumentasi untuk deteksi Tekanan
    2. Instrumentasi untuk deteksi Aliran
    3. Instrumentasi untuk deteksi Temperatur
    4. Instrumentasi untuk deteksi Gaya, Torsi dan Daya
    5. Instrumentasi untuk deteksi Level

INSTRUKTUR TRAINING :
Dr. Ir. Farida Idealistina Muchtadi,MT. adalah seorang associate professor di Institut Teknologi Bandung, ITB. Beliau mengajar di jurusan teknik fisika (TF) ITB, dan juga mengajar di program magister(S2) di program instrumentasi dan kontrol(PINK) ITB. Ibu Dr. Farida I Muchtadi sudah berpengalaman dalam memberikan pelatihan/training kepada perusahaan-perusahaan di Indonesia. Di Kampus ITB, Beliau mengajar untuk beberapa mata kuliah seperti design of experiments(DOE), metode dan sistem pengukuran, sistem instrumentasi, instrumentasi medik, laboratorium teknik fisika serta tugas khusus. Dengan perjalanan waktu yang panjang sebagai dosen dan pengalaman yang baik Ibu Dr. Farida I Muchtadi siap membagikan dan mendiskusikan ilmu dan pengalamannya di kelas-kelas training Beliau.

 

TEMPAT TRAINING:
Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

DURASI TRAINING :
4 hari

TRAINING TIME :

  • 08 Jun 2015-11 Jun 2015
  • 06 Jul 2015-09 Jul 2015
  • 03 Aug 2015-06 Aug 2015
  • 07 Sep 2015-10 Sep 2015
  • 26 Oct 2015-29 Oct 2015
  • 09 Nov 2015-12 Nov 2015
  • 30 Nov 2015-03 Dec 2015

HARGA INVESTASI/PESERTA :

  1. Rp. 8.500.000/peserta (bayarpenuh) atau
  2. Rp. 8.250.000/peserta (early bird, yang membayar 1 minggusebelum training) atau
  3. Rp. 7.950.000/peserta (pesertabergroup yang terdiridari 3 pesertaataulebihdari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flashdiskberisimateri training
  3. Sertifikat
  4. ATK: NoteBookdan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training denganfasilitas Full AC dan multimedia
  9. Makansiangdan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasiuntukpesertadari hotel penginapanke hotel tempat training – PP (jikapeserta minimal darisatuperusahaanada 4 peserta)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Ole For Process Control (OPC) & Distributed Component Object Model (DCOM) BANDUNG

Jadwal Training

Ole For Process Control (OPC) & Distributed Component Object Model (DCOM) BANDUNG Tanggal Dalam UNDANGAN TRAINING Tempat Hotel Kagum Group Bandung (Golden Flower, Banana Inn, ... Baca Selengkapnya

Ole For Process Control (OPC) & Distributed Component Object Model (DCOM) BANDUNG

Jadwal Training

Ole For Process Control (OPC) & Distributed Component Object Model (DCOM) BANDUNG

Tanggal
Dalam UNDANGAN TRAINING

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
OPC (OLE for Process Control) is a series of standards specifications. The first standard (originally called simply the OPC Specification and now called the Data Access Specification) resulted from the collaboration of a number of leading worldwide automation suppliers working in cooperation with Microsoft. Originally based on Microsoft’s OLE COM (component object model) and DCOM (distributed component object model) technologies, the specification defined a standard set of objects, interfaces and methods for use in process control and manufacturing automation applications to facilitate interoperability. The COM/DCOM technologies provided the framework for software products to be developed. There are now hundreds of OPC Data Access servers and clients available. Both software supplier and users get benefits from OPC. The benefit to the software suppliers was the ability to reduce their expenditures for connectivity and focus them on the core features of the software. For the users, the benefit was flexibility. They don’t have to create and pay for a custom interface. OPC interface products are built once and reused many times; therefore, they undergo continuous quality control and improvement.

WHO SHOULD ATTEND THIS TRAINING?
This training is addressed for : managers, instrumentation and control personnel, electrician engineers and technicians to the latest standards and practices in the OLE for process Control (OPC) and distributed component object model (DCOM).

TRAINING MATERIAL OUTLINE :

  1. What is OPC
  2. OPC History
  3. Component Object Model (COM)
  4. Object Linked Embedded (OLE)
  5. OLE Automation
  6. Distributed COM
  7. What is ActiveX
  8. DDE
  9. OLE Process Control Benefit
  10. OPC- Benefit to Vendors
  11. OPC- Benefit to Users
  12. Who Should Care about OPC
  13. How Is OPC going to improve the bottom line
  14. How does it handle the remote server being disconnected with the DCOM
  15. Can OPC implement Safe shutdowns
  16. OPC Client
  17. API
  18. OPC Browse
  19. Central Processing Unit
  20. OPC component Object Model
  21. Human Machine Interfaces (HMI) System

TRAINING DURATION : 4 days

INVESTATION PRICE/PERSON :

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training) or
  • Rp 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Dr.Ir. Sutanto Hadisupadmo.MT.,IPM is a lecturer at Physics Engineering Bandung Institute of Technology (ITB), and has been as a Head of Laboratory of Industrial Instrumentation at ITB. He is former Director of Instrumentation Center and Technical Services of ITB. His education started at Engineering Physics, Bandung Institute of Technology (ITB-1977), then at Diplome Universite in Energetique, Universite de Prepignan, France (1985), Magister Engineering in Instrumentation and Control (ITB) and Doctor (ITB). He has over 20 years of experience doing training, consulting work in instrumentation, measurement, safety and process control and Mr. Sutanto has trained many training/courses for many companies in Indonesia such as PT. TOTAL Indonesie, Pertamina, PT. Petrokimia Gresik, PT. Badak LNG, PT. Pupuk Iskandar Muda, PT. Pupuk Kaltim, PT. Jaya Ancol and many others. As professional he has handled many projects in Instrumentation Process, Tools Evaluation, Transmitter, General Evaluation of Instrumentation Specification, Commercial Building Power Audit, Maintenance Management Evaluation, etc. To get more advance information and knowledge he has participated in domestic and overseas training, seminar, workshop and conference as participant or speakers.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Protective Coating Technology For Corrosion Control (BANDUNG)

Jadwal Training

Protective Coating Technology For Corrosion Control (BANDUNG) Tanggal 20 May 2015-22 May 2015 17 Jun 2015-19 Jun 2015 08 Jul 2015-10 Jul 2015 19 Aug ... Baca Selengkapnya

Protective Coating Technology For Corrosion Control (BANDUNG)

Jadwal Training

Protective Coating Technology For Corrosion Control (BANDUNG)

Tanggal

  • 20 May 2015-22 May 2015
  • 17 Jun 2015-19 Jun 2015
  • 08 Jul 2015-10 Jul 2015
  • 19 Aug 2015-21 Aug 2015
  • 16 Sep 2015-18 Sep 2015
  • 28 Oct 2015-30 Oct 2015
  • 18 Nov 2015-20 Nov 2015
  • 09 Dec 2015-11 Dec 2015

Duration   
3 Days

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INVESTATION PRICE/PERSON :

  1. Rp 6.500.000/peserta (bayar penuh)  atau
  2. Rp 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training)  atau
  3. Rp 5.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

TRAINING OBJECTIVES :
This course provides a comprehensive overview for those who are new to the protective coatings industry. It is also an ideal refresher for reviewing the fundamentals of corrosion and control and the use of paint and coating as a protective mechanism against corrosion and deterioration of industrial structures.

TRAINING PURPOSES :
After the course you will be able to:

  1. The duty, responsibility of an industrial Painting inspector.
  2. Identify types of corrosion and corrosion control.
  3. Recognize the different types of paint and the mechanisms  in the process of protection.
  4. Surface preparation is critical to achieving the maximum of protection
  5. Describe the inspection equipment and methods .
  6. Classify coating selection and application by facility and service environment.
  7. Recognize the safety hazards involved in painting operations

TRAINING MATERIAL OUTLINE :

  • Corrosion and corrosion control of steel structure
  • Types of paint and their protection mechanisms
  • Surface preparation for Painting
  • Paint application
  • Inspection and Quality Control
  • Painting for Steel Structures
  • Coating defects and failures
  • Safety in painting operations

WHO SHOULD ATTEND THIS TRAINING?:
Technician of contractors, engineers, inspectors, consultants, and facility owners and everyone who want to know this topic.

FACILITIES FOR PARTICIPANTS :

  • Modul Training
  • Flashdisk Training berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Trainer     
Djoko Hadi Prajitno, Ir. MSME.
Ir. Djoko Hadi Prajitno, MSME. was graduated from Mining Metallurgy Bandung Institute of Technology (ITB) and Material Engineering UNSW Australia. He is as expert in Metallurgy/materials engineer at Metallurgy Laboratory Pusat Teknologi Nuklir Bahan dan Radiometri (PTNBR) Badan tenaga nuklir nasional (BATAN) Bandung. He is also lecturer at University of Jenderal Achmad Yani Bandung and lecturer at ITENAS (Institut teknologi nasional) Bandung. In campus he teachs material engineering, corrosion, advanced material, coating and metallurgy. He has researched some topics related to his expertise such as

  1. Research and development metal alloy with zirconium matrix
  2. Research and development coating of metal alloy inconel with aluminate in collaboration with mining engineering ITB
  3. Production and development of compound alloy between nikel-aluminida metals in collaboration with mechanical engineering ITB
  4. Coating of nikel aluminida at inconel alloy with spray Coating in collaboation with mechanical engineering ITB
  5. Research on Coating
  6. Research for production of material for stater drive Hercules airoplane in collaboration with DISLITBANG TNI AU
  7. Welding research of dissimilar metal
  8. And others

He frequently teachs training class for participants from many Indonesian companies. he has experience and knowledge about materials and skill that can be beneficial for warehouse people. He is member or has experience at some organizations such as HFI, Indonesian Corrosion Association, LSP AKN, Indosian Petroleum Association, National America Corrosion Engineer . Related to his expertise, he has much field experiences.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

PRACTICAL WELDING

Jadwal Training

PRACTICAL WELDING Jadwal & Tempat : Selasa-Kamis 19 – 21 Mei 2015 Selasa-Kamis 16 – 18 Juni 2015 Selasa-Kamis 21 – 23 Juli 2015 Selasa-Kamis ... Baca Selengkapnya

PRACTICAL WELDING

Jadwal Training

PRACTICAL WELDING

Jadwal & Tempat :

  • Selasa-Kamis 19 – 21 Mei 2015
  • Selasa-Kamis 16 – 18 Juni 2015
  • Selasa-Kamis 21 – 23 Juli 2015
  • Selasa-Kamis 18 – 20 Agustus 2015
  • Selasa-Kamis 15 – 17 September 2015
  • Selasa-Kamis 20 – 22 Oktober 2015
  • Selasa-Kamis 17 – 19 November 2015
  • Selasa-Kamis 15 – 17 Desember 2015

Pukul
08.00-16.00

Tempat
Yogyakarta, Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

Investasi:

  • Investasi pelatihan selama 3 (tiga) hari ini adalah senilai Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
  • Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).
  • Untuk pelaksanaan di kota lain, harga menyesuaikan dengan jumlah peserta.

OVERVIEW

  • Peserta mampu melakukan sistem kerja Las busur listrik
  • Peserta mampu melakukan sistem kerja las oksi – acetilen dengan berbagai macam posesi pengelasan

Sasaran

  • Pemimpin proyek, anggota dan tim proyek, calon-calon pemimpin/anggota tim proyek
  • Pengawas proyek
  • Departemen Teknik
  • Individu/ Staff yang terlibat dalam pengelolaan proyek (Konstruksi maupun non-konstruksi)

TOPIK / MATERI

  1. Sistem Las busur listrik
  2. Pengelasan pada posisi pengelasan 1 F untuk posisi mendatar
  3. Pengelasan pada posisi pengelasan 1 F untuk jenis sambungan tumpul
  4. Pengelasan pada posisi pengelasan 1 F untuk metoda diayun
  5. Pengelasan  pada posisi pengelasan 1 F untuk jenis sambungan T
  6. Sistem kerja las oksi asetilen
  7. Pengelasan pada posisi pengelasan 1 F untuk proses pencairan tanpa bahan tambah
  8. Pengelasan pada posisi pengelasan 1 F untuk sambungan tumpul ( butt joint )
  9. Pengelasan pada posisi pengelasan 1 F untuk sambungan sudut luar dan T
  10. Pengelasan pada posisi pengelasan 1 F untuk samb. sudut luar ( Out corner joint )
  11. Pengelasan pada posisi pengelasan 1 F untuk sambungan pipa
  12. Pengelasan pada posisi pengelasan 2 F untuk sambungan pipa
  13. Pengelasan pada posisi pengelasan 3 F untuk sambungan pipa
  14. Brassing pada pipa dengan bahan tambah

METODE PELATIHAN
Presentation, Discuss, Case Study, Evaluation, Simulation

TRAINER
Widarto Sutrisno, ST, MT  & Team
(Staf Pengajar, Trainer & Konsultan dalam bidang Building and Construction, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA).

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Petroleum Engineering for Non Engineering (YOGYAKARTA)

Jadwal Training

Petroleum Engineering for Non Engineering (YOGYAKARTA) JADWAL •    16 – 18 Februari 2015 •    17 – 19 Maret 2015 •    21 – 23 April 2015 ... Baca Selengkapnya

Petroleum Engineering for Non Engineering (YOGYAKARTA)

Jadwal Training

Petroleum Engineering for Non Engineering (YOGYAKARTA)

JADWAL
•    16 – 18 Februari 2015
•    17 – 19 Maret 2015
•    21 – 23 April 2015

LOKASI
Yogyakarta

WAKTU
08.30-16.00 WIB

BIAYA
Yogyakarta >> IDR 7.500.000,- (Non-Residential) | Minimal kuota 3 peserta| Diskon untuk pengiriman 3 peserta dari perusahaan yang sama

DESKRIPSI
This course provides introduction to the petroleum industries and petroleum engineering activities. The coverage starts from introducing the petroleum (oil and gas) industries, and it is followed by the illustration and description of oil and gas reservoir (what is it really looks like?). The participants will then be presented the petroleum engineering activities from finding, lifting, and transporting oil and gas. Brief presentation on the current technologies to increase oil recovery will be also presented.

After attending this course, course participants are expected to:

  • Understand the scope of the Petroleum Industry
  • Know the stages of petroleum operations in the world
  • In the exploration phase, to understand the environment the formation of Petroleum, and surveys in the search for petroleum
  • In the stage of drilling, knowing the main drilling systems and functions
  • In the evaluation stage, to understand the methods to determine the ability of a Petroleum reservoir
  • In the production phase, to understand the methods of artificial lift in oil wells Producing
  • Know themethods forremoval ofoilinthe advanced stage(Enhanced OilRecovery)

MATERI KURSUS
INTRODUCTION
•    General
•    Brief of the activities in Indonesia Oil and Gas Industry
•    Phase Drilling
•    Evaluation Phase
•    Production Phase
•    Enhanced Oil Recovery
EXPLORATION
•    Environmental presence of Oil and Gas
•    Prognosis

RESERVOIR ENGINEERING
•    Characteristics of Reservoir Rock
•    Characteristics of Reservor Fluid
•    Hidrocarbon Resevoir Reserve

Drilling engineering
•    Introduction
•    hoisting System
•    circulating System
•    Rotating System
•    BOP System
•    Power System

FORMATION EVALUATION
•    Introduction
•    The purpose of Formation Evaluation
•    Formation Evaluation Method
•    Modern Logging Equipment
•    Basic Concepts Log Analysis
•    Reserve Estimates
•    Reservoir Volume

PRODUCTION ENGINEERING
•    Natural Flow
•    Sucker Rod
•    Hydraulic Pump
•    Electrical Submersible Pump
•    Progresive Capacity Pump
•    Jet Pump
•    Gas Lift Equipment

OFFSHORE TECHNOLOGY
•    History of Offshore Technology
•    Offshore Pavilion
•    Offshore Production Systems

FIELD MANAGEMENT
•    Introduction
•    Basic Concepts
•    Model and Formulation Rate
•    Analysis of Various Alternatives

PESERTA
Managers, Bankers, Secretaries, Accountants, Lawyers, Purchasing Agents, Businessmen, Owners of Oil Properties, Oilfield Suppliers and Salesmen, Administration personnel and supportive Industry personnel

METODE
Presentation; Discussion; Case Study;Evaluation; Pre test & Post Test

FASILITAS
Hotel Berbintang; Sertifikat Training; Training Kit; Modul (Hard Copy + Soft Copy); 1x Lunch dan 2x Coffe Break; Souvenir; Transportasi Antar Jemput (minimal 2 orang dari perusahaan yang sama)

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Project Management for Engineering And Construction (Yogyakarta, Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak)

Jadwal Training

Project Management for Engineering And Construction (Yogyakarta, Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak) Jadwal & Tempat : Selasa-Kamis 6 – ... Baca Selengkapnya

Project Management for Engineering And Construction (Yogyakarta, Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak)

Jadwal Training

Project Management for Engineering And Construction

(Yogyakarta, Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak)

Jadwal & Tempat :

  • Selasa-Kamis 6 – 8 Januari 2015
  • Selasa-Kamis 3 – 5 Februari 2015
  • Selasa-Kamis 3 – 5 Maret 2015
  • Selasa-Kamis 7 – 9 April 2015
  • Selasa-Kamis 5 – 7 Mei 2015
  • Rabu-Jum’at 3 – 5 Juni 2015
  • Selasa-Kamis 7 – 9 Juli 2015
  • Selasa-Kamis 4 – 6 Agustus 2015
  • Selasa-Kamis 1 – 3 September 2015
  • Selasa-Kamis 6 – 8 Oktober 2015
  • Selasa-Kamis 3 – 5 November 2015
  • Selasa-Kamis 1 – 3 Desember 2015

08.00-16.00 WIB

Yogyakarta, Surabaya, Semarang, Solo, Jakarta, Bandung, Bali, Batam, Makassar, Balikpapan, Banjarmasin, Pontianak

Investasi:

  • Investasi pelatihan selama 3 (tiga) hari ini adalah senilai Rp 7.000.000,- (Tujuh Juta Rupiah) untuk setiap peserta (khusus untuk wilayah Yogyakarta, dengan minimal peserta 2 orang).
  • Apabila perusahaan mengutus lebih dari 3 peserta, maka setiap peserta cukup membayar Rp. 6.500.000,- (Enam Setengah Juta rupiah).
  • Untuk pelaksanaan di kota lain, harga menyesuaikan dengan jumlah peserta.

OVERVIEW
Prosedur yang digunakan oleh masing-masing manajer dalam manajemen proyek atau project management bervariasi. Maka koordinasi desain dan konstruksi proyek membutuhkan perencanaan dan pengorganisasian tim yang ditujukan untuk menyelesaikan proyek. Kunci utama kesuksesan suatu proyek adalah pemilihan dan koordinasi yang mampu mendeteksi dan memecahkan masalah proyek. Manajemen konstruksi berperan untuk menjamin jalannya koordinasi dan komunikasi diantara semua bagian dalam suatu proyek konstruksi, yang pada umumnya terdiri dari persoalan biaya, waktu, mutu, SDM, pengadaan, lingkungan, K3, resiko, klaim dan berbagai hal lain yang mempengaruhi keberhasilan proyek konstruksi.

Tujuan
Setelah mengikuti training project management ini diharapkan peserta dapat memiliki pengetahuan dan ketrampilan dalam mengelola proyek konstruksi dengan baik dan berhasil.

SASARAN

  • Pemimpin proyek, anggota dan tim proyek
  • Calon-calon pemimpin/anggota tim proyek
  • Pengawas proyek
  • Departemen Teknik
  • Individu/staff yang terlibat dalam pengelolaan proyek

TOPIK / MATERI

  1. Ruang lingkup dan definisi proyek
  2. Proses budgeting Proyek
  3. Perencanaan Proyek
  4. Penjadwalan Proyek
  5. Pengukuran kerja, waktu dan biaya yang dikeluarkan
  6. Penyelesaian akhir proyek
  7. Studi kasus

METODE PELATIHAN
Presentation, Discuss, Case Study, Evaluation, Simulation

TRAINER
Widarto Sutrisno, ST, MT  & Team
(Staf Pengajar, Trainer & Konsultan dalam bidang Building and Construction, telah menangani bebagai perusahaan baik BUMD, BUMN maupun PMA).

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2026

Info Seminar | Jadwal Seminar