Jadwal Training Info Seminar

Pelatihan PID Controller

Jadwal Training

Pelatihan PID Controller PID Controller – PID (Proportional-Integral-Derivative) controller, atau pengendali PID, adalah alat pengendalian otomatis yang digunakan dalam sistem kontrol untuk mengatur berbagai proses ... Baca Selengkapnya

Pelatihan PID Controller

Jadwal Training

Jadwal Training Info Seminar

Pelatihan PID Controller

PID Controller – PID (Proportional-Integral-Derivative) controller, atau pengendali PID, adalah alat pengendalian otomatis yang digunakan dalam sistem kontrol untuk mengatur berbagai proses dan sistem. Ini merupakan salah satu jenis kontrol otomatis yang paling umum digunakan di berbagai aplikasi industri dan otomatisasi. Pengendali PID berfungsi dengan menghitung perbedaan antara nilai setpoint (target yang diinginkan) dan nilai yang diukur, lalu menghasilkan sinyal kontrol untuk mengendalikan proses sehingga mendekati nilai setpoint dengan sebaik mungkin.

PID Controller adalah alat yang sangat berharga dalam kontrol otomatis yang dapat memberikan stabilitas dan presisi dalam berbagai aplikasi industri dan sistem otomatisasi.

Deskripsi Pelatihan
Pelatihan PID Controller adalah program pendidikan yang dirancang untuk mengajarkan peserta tentang konsep dan penggunaan pengendali PID (Proportional-Integral-Derivative) dalam pengaturan sistem otomatis. Program ini memberikan pemahaman mendalam tentang teori dan praktik yang berkaitan dengan PID Controller dan bagaimana menggunakannya dalam berbagai aplikasi industri dan teknis.

Materi Pelatihan  

  1. Pengenalan ke Pengendali PID
  • Definisi dan dasar-dasar pengendali PID.
  • Sejarah dan perkembangan pengendali PID dalam dunia industri.
  1. Komponen-komponen PID
  • Pemahaman tentang masing-masing komponen PID, yaitu Proportional (P), Integral (I), dan Derivative (D).
  • Cara masing-masing komponen memengaruhi respons sistem.
  1. Teori dan Prinsip Kerja PID
  • Penjelasan prinsip dasar di balik operasi PID Controller.
  • Cara PID Controller mengukur kesalahan (error) dan menghasilkan sinyal kontrol.
  1. Penyetelan dan Parameter PID
  • Cara menentukan parameter PID yang optimal untuk sistem tertentu.
  • Metode penyetelan, seperti Ziegler-Nichols dan metode eksperimen.
  1. Aplikasi Praktis
  • Studi kasus dan aplikasi nyata dari pengendali PID, seperti kontrol suhu, kontrol kecepatan motor, dan kontrol level.
  • Demonstrasi bagaimana mengimplementasikan PID Controller dalam sistem nyata.
  1. Troubleshooting dan Optimisasi
  • Cara mengidentifikasi masalah dalam pengendali PID dan mengatasi masalah umum.
  • Teknik optimisasi untuk meningkatkan kinerja pengendali PID.
  1. Simulasi dan Latihan Praktis

INSTRUCTURE / FASILITATOR
Profile Pembicara akan disertakan dalam UNDANGAN TRAINING

JADWAL DAN INVESTASI PELATIHAN
Yogyakarta / Cavinton Hotel | Rp. 5.250.000/peserta
Semarang / Ibis Simpang Lima Hotel | Rp. 5.900.000/peserta
Malang / Santika Malang Hotel | Rp. 5.900.000/peserta
Solo / Ibis Solo Hotel | Rp. 5.900.000/peserta
Jakarta / Ibis Tamarin Hotel | Rp. 7.000.000/peserta
Surabaya / Santika Hotel  | Rp. 7.000.000/peserta
Bandung / Novotel Cihampelas Hotel | Rp. 7.000.000/peserta
Bali / Santika Hotel | Rp. 8.100.000/peserta
Batam / Ibis Style Hotel | Rp. 8.100.000/peserta
Balikpapan / Ibis Hotel | Rp. 8.100.000/peserta
(biaya tersebut belum termasuk penginapan)

Tahun 2024

BULANMINGGU IMINGGU IIMINGGU IIIMINGGU IVMINGGU V
Januari2-39-1016-1723-2429-30
Februari1-26-714-1521-2227-28
Maret5-612-1319-2026-27
April2-39-1016-1723-24 29-30
Mei1-27-814-1521-2228-29
Juni4-511-1217-1826-27
Juli2-39-1016-1723-2430-31
Agustus1-26-714-1521-2227-28
September3-410-1117-1824-25
Oktober1-28-915-1622-2329-30
November4-511-1217-1824-25
Desember3-410-1117-1824-25

Bila calon peserta menghendaki request tanggal dan durasi dapat kami fasilitasi baik untuk PublIc Training maupun Inhouse Training.

Catatan :

  1. Apabila mendaftarkan peserta dalam minimal jumlah kuota dengan judul dan jadwal yang sama (Jogja, Jakarta dan Bandung : Minimal 2 peserta | Semarang, Solo, Bali, Batam, Surabaya dan Malang : Minimal 3 Peserta), maka peserta / instansi terkait dapat me-request tanggal dan lokasi pelatihan sesuai dengan yang dibutuhkan.
  2. Penawaran khusus bagi pengiriman dengan jumlah 3 peserta / lebih
  3. Biaya tersebut belum termasuk penginapan
  4. Biaya belum termasuk PPN 10 %
  5. Peserta dapat melakukan request materi sesuai dengan kebutuhan

FASILITAS PELATIHAN

  1. Sertifikat Pelatihan (Certificate)
  2. Expert Instructure
  3. Meeting Room Hotel dengan Lunch dan 2 kali Coffe Break
  4. Exclusive Training kits dan Backpacks
  5. Modul Pelatihan Hard dan Softcopy
  6. USB Flashdisk
  7. Foto Group Soft & Hard Copy
  8. Souvenir
  9. Transportasi selama Pelatihan (bandara dan Penginapan Ke Lokasi Pelatihan).

METODE PELATIHAN

  • Presentasi
  • Diskusi  dan Tanya Jawab
  • Studi kasus
  • Brainstorming
  • Praktek

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing
Jadwal Training

Perlakuan Panas Logam (Heat Treatment For Metal)

Jadwal Training

Perlakuan Panas Logam (Heat Treatment For Metal) Tanggal 06 Nov 2023-09 Nov 2023 04 Dec 2023-07 Dec 2023 Tempat Hotel Kagum Group Bandung (Golden Flower, ... Baca Selengkapnya

Perlakuan Panas Logam (Heat Treatment For Metal)

Jadwal Training

Jadwal Training

Perlakuan Panas Logam (Heat Treatment For Metal)

Tanggal
06 Nov 2023-09 Nov 2023
04 Dec 2023-07 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

PENDAHULUAN :
Sifat mekanik logam (ferrous) dan paduannya sangat dipengaruhi oleh proses pembuatan (raws material), struktur mikro, dan proses perlakuan lanjutannya.  Sifat mekanik dapat mengalami perubahan bila bahan tersebut diproses dengan perlakuan panas (heat treatment). Secara garis besar heat treatment memiliki tujuan untuk memperbaiki keuletan, menghilangkan tegangan sisa, mengubah ukuran butir, dan meningkatkan kekerasan atau kekuatan tarik. Pengaruh heat treatment ini sangat luas terutama terhadap mampu mesin, mampu bentuk, konduktivitas listrik, sifat magnetik dan ketangguhannya. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Proses Perlakuan Panas (Heat Treatment).
 
PESERTA TRAINING :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang teknologi material pada industri rekayasa.

TUJUAN TRAINING :  
Setelah mengikuti pelatihan ini peserta diharapkan memiliki pemahaman lebih tentang pengetahuan dan keahlian melakukan proses perlakuan panas (heat treatment).

CAKUPAN MATERI TRAINING :

  1. Konsep dasar proses perlakuan panas
    Definisi, tujuan, syarat-syarat, diagram fasa besi-carbon, transformasi fasa,
  2. Klasifikasi proses perlakuan panas
    Hardening, Annealing, Normalizing, Tempering
  3. Pengerasan permukaan
    Carburizing, Flame hardening, Nitriding.
  4. Diagram CCT.
  5. Analisis sifat mekanik.
  6. Pengujian sampling mampu keras bahan

INVESTATION PRICE/PERSON :   

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.:

Pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.

In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing
Jadwal Training Info Seminar

Advance PID Controller (BANDUNG)

Jadwal Training

Advance PID Controller (BANDUNG) Tanggal 06 Nov 2023-09 Nov 2023 13 Nov 2023-16 Nov 2023 11 Dec 2023-14 Dec 2023 Tempat Hotel Kagum Group Bandung ... Baca Selengkapnya

Advance PID Controller (BANDUNG)

Jadwal Training

Jadwal Training Info Seminar

Advance PID Controller (BANDUNG)

Tanggal

  • 06 Nov 2023-09 Nov 2023
  • 13 Nov 2023-16 Nov 2023
  • 11 Dec 2023-14 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DESCRIPTION:
Covers the principle of  advance industrial process control. Also provides the usually found  advanced PID configuration in industrial systems. Methods for advanced PID controller configuration and tuning are also discussed.

TRAINING OBJECTIVE:
You will be able to :

  1. Understand the concept of advanced process control
  2. Understand the concept of advanced PID controller
  3. Identify the requirement for open loop and closed loop stability
  4. Understand the concept of advanced PID controller
  5. Use advanced PID controller tuning
  6. Know the implementation of advanced PID controller and advanced tuning

TRAINING MATERIAL OUTLINE:

  1. Review to Process Control
  2. Advanced Types of PID Controller
  3. Performance of Control Systems
  4. Cascade control
  5. Ratio control
  6. Split-range control
  7. Signal select control
  8. Feedforward control
  9. Anti-windup control
  10. Advanced PID Tuning
  11. PID Auto-tuning
  12. Optimal PID tuning

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:

  1. Computer Facilities with Personal Computer Intel Pentium III and 4
  2. Practical work using PLC
  3. (Yokogawa, OMRON or Schneider)
  4. Simulation using Expertune or MATLAB Software
  5. Process Simulator

PREREQUISITE:  Have Knowledge on Process Control

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training)  or
  3. Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.  He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung.

He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012).

He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004).

He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pelatihan Electronic and Mechatronic

Jadwal Training

Pelatihan Electronic and Mechatronic Training Electronic and Mechatronic Electronic and Mechatronic – Merupakan dua bidang yang erat kaitannya dalam dunia teknik dan teknologi, masing-masing memiliki ... Baca Selengkapnya

Pelatihan Electronic and Mechatronic

Jadwal Training

Pelatihan Electronic and Mechatronic

Training Electronic and Mechatronic

Electronic and Mechatronic – Merupakan dua bidang yang erat kaitannya dalam dunia teknik dan teknologi, masing-masing memiliki karakteristik dan aplikasi uniknya sendiri; Sistem elektronik mencakup desain, pengembangan, dan penggunaan komponen elektronik, sirkuit, dan perangkat elektronik untuk melakukan berbagai fungsi dan tugas; Sistem ini bergantung pada aliran elektron yang terkendali untuk memanipulasi sinyal listrik; Sistem mekatronik mewakili pendekatan multidisiplin yang menggabungkan teknik mesin, elektronika, ilmu komputer, dan teknik kontrol untuk menciptakan sistem terintegrasi yang mampu melakukan tugas mekanis dengan presisi dan otomatisasi. Sistem ini biasanya mencakup sensor, aktuator, dan algoritma kontrol untuk mencapai tujuan tertentu.

Baik sistem elektronik maupun mekatronik merupakan komponen penting dalam teknologi modern dan otomatisasi, memainkan peran utama di berbagai industri. Insinyur yang mengkhususkan diri dalam bidang ini memiliki kesempatan untuk bekerja pada teknologi terdepan dan berkontribusi pada perkembangan dalam berbagai bidang, seperti manufaktur, perawatan kesehatan, transportasi, dan hiburan, dengan akhirnya meningkatkan efisiensi dan kemampuan berbagai produk dan sistem.

Deskripsi Pelatihan 

Pelatihan dalam bidang Electronic and Mechatronic adalah program yang dirancang untuk memberikan pemahaman mendalam dan keterampilan praktis kepada individu yang ingin mengembangkan kompetensi dalam teknologi elektronik dan mekatronik; Pelatihan ini mencakup berbagai aspek dalam kedua bidang tersebut. Program pelatihan Electronic and Mechatronic akan membekali peserta dengan pengetahuan dan keterampilan yang diperlukan untuk bekerja dalam industri yang berkaitan dengan teknologi elektronik dan mekatronik, serta membantu mereka mengatasi tantangan yang kompleks dalam pengembangan dan pemeliharaan sistem yang terkait dengan kedua bidang tersebut.

Materi Pelatihan  

  1. Electronic Systems (Sistem Elektronik)
  • Dasar-dasar elektronika.
  • Komponen elektronik dan sirkuit.
  • Desain sirkuit elektronik.
  • Elektronika digital dan analog.
  • Penggunaan mikrokontroler dan mikroprosesor.
  • Elektronika daya dan pengendalian.
  • Sistem komunikasi elektronik.
  1. Mechatronic Systems (Sistem Mekatronik)
  • Pengenalan mekatronik.
  • Sensor dan aktuator dalam mekatronik.
  • Sistem kendali dan algoritma.
  • Integrasi elektronik dalam mekanisme mekatronik.
  • Aplikasi mekatronik dalam industri, robotika, dan otomasi.
  • Penggunaan mikrokontroler dalam sistem mekatronik.
  1. Integrasi Elektronik dan Mekatronik
  • Pengembangan sistem mekatronik yang efisien.
  • Perancangan kontrol untuk aplikasi mekatronik.
  • Integrasi perangkat elektronik dan mekanik.
  • Studi kasus dan proyek praktis dalam integrasi elektronik dan mekatronik.

Tujuan Dan Manfaat Pelatihan 

Setelah mengikuti pelatihan ini, peserta diharapkan mampu untuk :

  1. Memahami tentang prinsip-prinsip dasar di bidang elektronik dan mekatronik, termasuk teori, konsep, dan aplikasi yang mendasar.
  2. Mengembangkan keterampilan praktis dalam merancang, mengoperasikan, dan memelihara sistem elektronik dan mekatronik.
  3. Mengintegrasikan komponen elektronik dengan elemen-elemen mekanik untuk menciptakan sistem mekatronik yang efisien dan efektif.
  4. Mengembangkan kemampuan dalam mengidentifikasi dan memecahkan masalah yang mungkin muncul dalam sistem elektronik dan mekatronik.
  5. Memahami tentang praktik keselamatan kerja yang penting saat bekerja dengan peralatan elektronik dan mekatronik

Tahun 2024

BULANMINGGU IMINGGU IIMINGGU IIIMINGGU IVMINGGU V
Januari2-39-1016-1723-2429-30
Februari1-26-714-1521-2227-28
Maret5-612-1319-2026-27
April2-39-1016-1723-24 29-30
Mei1-27-814-1521-2228-29
Juni4-511-1217-1826-27
Juli2-39-1016-1723-2430-31
Agustus1-26-714-1521-2227-28
September3-410-1117-1824-25
Oktober1-28-915-1622-2329-30
November4-511-1217-1824-25
Desember3-410-1117-1824-25

Bila calon peserta menghendaki request tanggal dan durasi dapat kami fasilitasi baik untuk PublIc Training maupun Inhouse Training.

Jenis Pelatihan 

Dalam penyelenggaraan Pelatihan Electronic and Mechatronic ada dua alternatif jenis jasa pelatihan seperti Public Training dan Inhouse Training. Dan dari dua jenis layanan tersebut kami membagi kembali dengan 2 metode pelatihan yang berbeda yaitu dengan tatap muka dan daring.

Tatap Muka adalah Pelatihan dengan menggunakan metode inclass, dimana peserta dan pengajar atau trainer berada dalam satu ruangan serta tidak lupa penyelenggaraan Pelatihan ini kami laksanakan dengan menjalankan protokol kesehatan Covid 19. Sedangkan Daring adalah Pelatihan dengan mempertemukan peserta dan pengajar atau trainer pada salah satu infrastruktur video conferencing yaitu zoom meeting.

Sehingga ada 4 pilihan jenis pelatihan yaitu public training tatap muka, public training daring, inhouse training tatap muka dan inhouse training daring.

Calon Participant 

Jadi sebenarnya siapa saja sih yang membutuhkan Pelatihan ini? menurut kami Pelatihan ini sangat cocok untuk diikuti oleh peserta yang ingin mendalami bidang Electronic and Mechatronic. Pelatihan ini sangat tepat diikuti oleh bagian lain yang ingin mengetahui lebih jauh tentang Electronic and Mechatronic.

Dan tidak menutup kemungkinan dapat diikuti pula oleh seluruh karyawan yang dapat mandat dari instansi/perusahaan guna menambah wawasan. Sehingga ilmu dari pelatihan ini bisa dirasakan dan dijalankan dengan baik sesuai dengan tujuan dari instansi/perusahaan itu sendiri.

Metode Pembelajaran

Sedangkan untuk Pelatihan Electronic and Mechatronic yang kami selenggarakan menggunakan pelbagai metode pembelajaran, seperti : Diskusi, Coaching, Presentasi, Tanya Jawab, Brainstorming, Ice Breaking dan Studi Kasus.

Fasilitas Pelatihan

Berikut ini Fasilitas Pelatihan Electronic and Mechatronic yang kami berikan sesuai dengan layanan yang dipilih oleh peserta, dengan penyesuaian tertentu sesuai dengan kebutuhan peserta / instansi / perusahaan.

Public dan Private Training (tatap muka)

  • 2x Coffee Break + 1 Lunch
  • 2 Hari Pelatihan
  • Expert Trainer
  • Sertifikat Pelatihan
  • ATK
  • Backpack Exclusive
  • Modul Pelatihan (Hardcopy & Softcopy)
  • Souvenir
  • Dokumentasi (Hardcopy & Softcopy)
  • Transportasi Selama Pelatihan

Inhouse Training (tatap muka)

  • Transportasi dan akomodasi trainer serta pendamping
  • Expert Trainer
  • Sertifikat Pelatihan
  • ATK
  • Backpack Exclusive
  • Modul Pelatihan (Hardcopy & Softcopy)
  • Dokumentasi (Hardcopy & Softcopy)

Online Training (Daring)  untuk public atau inhouse training

  • Expert Trainer
  • Sertifikat Pelatihan
  • Modul Pelatihan (Softcopy)
  • Dokumentasi (Hardcopy & Softcopy)
  • Host Zoom

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Analisis Getaran Dalam Perawatan Rotary Equipment (BANDUNG)

Jadwal Training

Analisis Getaran Dalam Perawatan Rotary Equipment (BANDUNG) TRAINING TIME :  09 Oct 2023-12 Oct 2023 20 Nov 2023-23 Nov 2023 18 Dec 2023-21 Dec 2023 ... Baca Selengkapnya

Analisis Getaran Dalam Perawatan Rotary Equipment (BANDUNG)

Jadwal Training

Analisis Getaran Dalam Perawatan Rotary Equipment (BANDUNG)

TRAINING TIME : 

  • 09 Oct 2023-12 Oct 2023
  • 20 Nov 2023-23 Nov 2023
  • 18 Dec 2023-21 Dec 2023

VENUE :  Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :  4 hari

TUJUAN TRAINING:
Agar peserta memahami penyebab getaran yang terjadi pada mesin, akibat-akibatnya, teknik-teknik inspeksi atau pemanfaatan getaran mesin, batas-batas  getaran maksimum yang diizinkan.

CAKUPAN MATERI TRAINING:

  • Dasar-dasar getaran
  • Karakteristik getaran
  • Unit pengukuran
  • Parameter getaran
  • Pemilihan parameter pengukuran
  • Tranducer getaran
  • Pengukuran getaran
  • Batas-batas getaran yang diizinkan
  • Interpretasi dan analisis getaran
  • Karakteristik getaran kerusakan mesin
  • Instalasi pengukuran tipe portable
  • Instalasi pengukuran tipe permanent dan data akuisisi
  • Hasil pengukuran
  • Trouble shooting guide gas turbin
  • Trouble shooting guide centrifugal process pump
  • Analisis vibrasi dan tribologi mesin rotasi
  • Analisis vibrasi Reciprocating Engine & Reciprocating Compressor

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?:
Engineer & Operator serta semua pihak yang ingin memahami topik ini.

INSTRUCTOR :  Ir. Syahbardia, MT.  dan Tim

INVESTATION PRICE/PERSON :    

1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  • Modul Training
  • Flashdisk Training berisi materi training
  • Sertifikat
  •  ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Ir. SYAHBARDIA, MT.  alumni dari teknik mesin Institut teknologi Bandung, ITB (sarjana), dan teknik material ITB untuk program magister. Beliau pernah menjadi dosen di Politeknik ITB/POLBAN dan sekarang Beliau menjadi dosen di jurusan teknik di universitas Pasundan, Bandung. Beliau memiliki pengalaman lapangan praktis sebagai mechanical engineer ketika beliau bekerja, seperti di IPTN, PINDAD, dan PAL. Ir. Syahbardia,MT. sudah sering menjadi instruktur di training-training industri untuk perusahaan-perusahaan di Indonesia. Diantara judul-judul yang Beliau sampaikan adalah Predictive and Preventive Pump Maintenance, Compressor Characteristic Maintenance & Troubleshooting, Rotary Equipment Maintenance, Lubrication, Operation, Maintenance and Trouble Shooting, Materials Selection and Knowledge for Engineers, Centrifugal Compresor & Steam Turbine Performance, Welding Inspection, Turbine & Generator Operation, Boiler Water Treatment, Pump Operation and Maintenance, Electrical Motor Control System, Corrosion and Cathodic Protection, Fluid Flow Measurement, Generator Preventive Maintenance, Heavy Equipment Management, Preventive and Predictive Maintenance, dan lain-lain.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

PLC (Programmable Logic Controller) : Principles, Operation and Programming (BANDUNG)

Jadwal Training

PLC (Programmable Logic Controller) : Principles, Operation and Programming (BANDUNG) Tanggal 09 Oct 2023-12 Oct 2023 13 Nov 2023-16 Nov 2023 18 Dec 2023-21 Dec ... Baca Selengkapnya

PLC (Programmable Logic Controller) : Principles, Operation and Programming (BANDUNG)

Jadwal Training

PLC (Programmable Logic Controller) : Principles, Operation and Programming (BANDUNG)

Tanggal

  • 09 Oct 2023-12 Oct 2023
  • 13 Nov 2023-16 Nov 2023
  • 18 Dec 2023-21 Dec 2023

Pukul
09.00-17.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION:
PLC Programming and Interfacing offers participants a hands-on approach to implementing industrial control by integrating typical plant floor electrical components with PLC-based controllers. Participants will learn to identify and connect field inputs and outputs;  communicate with, and program PLC-based controllers.

TRAINING OBJECTIVE:
After completing this training program, participants should be able to understand the configuration and lay-out of PLC system, review the system addressing, configure various components of PLC. Understand how PLC software user interface is laid out and learn how to customize the lay-out, review system addressing and I/O addressing as it applies to the PLC software, configure the various components of the PLC software, understand the difference between on-line and off-line programming, documentation troubleshooting, and explore the system health and diagnostic features of PLC software.

TRANING MATERIAL OUTLINE:

  • Overview to Industrial Process Control and Controller System
  • Overview of PLC System
  • PLCs Hardware
  • PLCs Interface Driver
  • PLCs Module Configuration
  • Software Programming
  • Programming Memory and Numbering System
  • Programming Timer and Counter
  • Programming Program Control Instruction
  • Programming Register
  • Programming Math Instruction
  • Programming PLC with State Transition Methodology
  • Comprehensive Practice
  • Interactive Discussion

TRAINING METHODES:

  •     Tutorial
  •     Discussion
  •     Practice

FACILITIES USED:

  •     PLC
  •     Software Simulator
  •     Miniature Plan

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flashdisk contain training material
  • Certificate
  • NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Foto
  • Training room with full ac facilities and multimedia
  • Lunch and twice coffee break everyday of training
  • Qualified Instructor
  • Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

Trainer     
H. MH Sapto Widodo, M.Sc and Hadi Prasetyo, MT
H. MH Sapto Widodo, M.Sc was born in June 9th 1957. He got his education of master of science in electrical engineering, System Design and Technology, Fachhochschule Darmstadt, Germany. He also has followed some courses for improving his competencies in Indonesia and abroad. He is head of electrical department at P4TK BMTI Bandung atau TEDC Bandung(technical education development  center) and he also as lecturer at the department. He has experiences in some consultants. Some training sectors related to his fields are as follows Electrical & Mechatronic, including these related fields: Electrical Appliances, Electrical Instalation, Refrigeration & Air Conditioning, and Industrial Automation.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Manual Metal ARC Welding (Las Listrik) BANDUNG

Jadwal Training

Manual Metal ARC Welding (Las Listrik) BANDUNG TRAINING TIME : 09 Oct 2023-12 Oct 2023 20 Nov 2023-23 Nov 2023 19 Dec 2023-22 Dec 2023 ... Baca Selengkapnya

Manual Metal ARC Welding (Las Listrik) BANDUNG

Jadwal Training

Manual Metal ARC Welding (Las Listrik) BANDUNG

TRAINING TIME :

  • 09 Oct 2023-12 Oct 2023
  • 20 Nov 2023-23 Nov 2023
  • 19 Dec 2023-22 Dec 2023

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :  4 days

LATAR BELAKANG :
Pada proses las listrik atau las elektroda terbungkus, busur api listrik yang terjadi antara ujung elektroda dan logam induk/benda kerja akan menghasilkan panas. Panas inilah yang mencairkan ujung elektroda dan benda kerja secara setempat. Elektroda yang dipakai berupa kawat yang dibungkus oleh pelindung berupa fluks. Dengan adanya pencairan ini maka kampuh las akan terisi oleh logam cair yang berasal dari elektroda dan logam induk, terbentuklah kawah cair, lalu membeku maka terjadilah logam lasan dan terak. Las listrik paling banyak digunakan di industry fabrikasi karena memiliki banyak keuntungannya antara lain dapat di pakai dimana saja termasuk pengelasan dalam air, pengelasan dengan segala posisi, elektrodanya mudah didapat, kebisingan rendah, dan sebagainya.

TUJUAN :
Peserta diharapkan dapat mengetahui dan memahami :

  1. Prinsip kerja las listrik.
  2. Keuntungan dan kerugian las listrik.
  3. Teknik dasar mengelas.
  4. Desain sambungan dan posisi pengelasan
  5. Material, pemilihan elektroda dan pemeriksaan hasil lasan.

PESERTA :

  1. Juru las (Welder).
  2. Teknisi, Supervisor dan Instruktur di bidang fabrikasi dan manufaktur logam.
  3. Pendidikan SLTA, STM, D-3, S-1 yang mempunyai pengalaman di bidang pengelasan logam.

CAKUPAN MATERI TRAINING:
TEORI :
a.    Prinsip kerja.
b.    Macam-macam mesin las listrik.
c.    Keuntungan dan kerugian.
d.    Polaritas
e.    Peralatan
f.    Bahan induk/benda kerja
g.    Elektroda
h.    Teknik dasar mengelas
i.    Perencanaan sambungan
j.    Posisi pengelasan
k.    Cacat-cacat las
l.    Keselamatan dan kesehatan kerja

PRAKTEK :
a.    Fillet weld (sambungan T)
b.    Plate weld (sambungan pelat)
c.    Tube weld (sambungan pipa)
(Posisi pengelasan sesuai dengan level yang mampu dicapai).

INSTRUCTOR :  Ir. Sutrimo and team

INVESTMENT PRICE/PERSON :
NON CERTIFICATION :

  1. Rp. 8.950.000/person (full fare) or
  2. Rp. 8.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 8.500.000/person (if there are 3 persons or more from the same company)

CERTIFICATION (BNSP ATAU IWS) :

  1. Rp. 10.500.000/person

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. Sutrimo dilahirkan di Jombang 5 Juli 1958. Beliau alumni dari politeknik ITB  jurusan mechanical engineering & production, dan alumni dari UGM jurusan mechanical engineering. Beliau sekarang sebagai dosen di politeknik ITB(politeknik negeri Bandung,POLBAN) di jurusan mesin. Di kampus Beliau mengajar beberapa mata kuliah diantaranya machining(production), material testing and measurement, instrumentation, industrial metrology, fabrication(welding), dll. Beliau pernah memegang beberapa posisi di kampusnya, seperti head of material testing and measurement, head of industrial metrology laboratory, training manager of welding training center international certification,trainer/instructor of international welder certificate, trainer/instructor of international welding practioner, trainer/instructor of basic training welding for instructor Indonesian polytechnic and university,dan head of welding training center international certification, dll.  Ir. Sutrimo sering juga mengikuti training-training sebagai peserta untuk meningkatkan kualitas kemampuan kompetensi Beliau. Ir. Sutrimo sudah sering dan berpengalaman memberikan training-training industry untuk perusahaan-perusahaan di Indonesia.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Motor Diesel : Prinsip Dasar, Operasi dan Perawatan (BANDUNG)

Jadwal Training

Motor Diesel : Prinsip Dasar, Operasi dan Perawatan (BANDUNG) Tanggal 09 Oct 2023-12 Oct 2023 27 Nov 2023-30 Nov 2023 11 Dec 2023-14 Dec 2023 ... Baca Selengkapnya

Motor Diesel : Prinsip Dasar, Operasi dan Perawatan (BANDUNG)

Jadwal Training

Motor Diesel : Prinsip Dasar, Operasi dan Perawatan (BANDUNG)

Tanggal

  • 09 Oct 2023-12 Oct 2023
  • 27 Nov 2023-30 Nov 2023
  • 11 Dec 2023-14 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :  4 days

OBJEKTIF :
•    Memahami prinsip dasar motor diesel
•    Mempelajari kinerja motor diesel
•    Mempelajari operasi dan perawatan motor diesel

SASARAN PESERTA TRAINING:
•    Teknisi motor diesel
•    Operator motor diesel
•    Praktisi perawatan

CAKUPAN MATERI TRAINING:
1.    Prinsip Dasar Motor Diesel
2.    Komponen Motor Diesel
3.    Sistem Kontrol dan Pengaman
4.    Kinerja Motor Diesel
5.    Operasi & Perawatan

INVESTATION PRICE/PERSON :    

  • Rp. 8.500.000/peserta (bayar penuh) atau
  • Rp. 8.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp. 7.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :
1.    Training Module
2.    Flashdisk contain training material
3.    Certificate
4.    NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Foto
8.    Training room with full ac facilities and multimedia
9.    Lunch and twice coffee break everyday of training
10.    Qualified Instructor
11.    Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir. Hendi Riyanto  adalah seorang dosen di fakultas teknik mesin dan dirgantara Institut Teknologi Bandung (ITB) dalam kelompok keahlian konversi energy. Pak Hendi Riyanto mengikuti post-graduate bidang Mechanical Engineering dari Colorado State University. Beliau secara aktif melakukan penelitian di Kampus di bidang interes kompetensi Beliau, seperti Simulasi Monte Carlo untuk Analisis Radiasi, Aplikasi termoelektrik Cooler (TEC) untuk alat pendingin, Desain dan analisis komponen sistem pembangkit uap, Optimalisasi Desain Kotak Pendingin dengan Metode Taguchi, dll. Beliau juga memiliki pengalaman berinteraksi dengan dunia luar atau industry seperti keterlibatan dalam pengerjaan projek dan menjadi pembicara/instruktur di kelas-kelas training industry.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electronic Switchboard Rescue (BANDUNG)

Jadwal Training

Electronic Switchboard Rescue (BANDUNG) TRAINING OBJECTIVE : Tujuan dari training ini adalah untuk menambah wawasan mengenai strategi dalam menyelamatkan atau menolong seseorang dari kecelakaan akibat ... Baca Selengkapnya

Electronic Switchboard Rescue (BANDUNG)

Jadwal Training

Electronic Switchboard Rescue (BANDUNG)

TRAINING OBJECTIVE :
Tujuan dari training ini adalah untuk menambah wawasan mengenai strategi dalam menyelamatkan atau menolong seseorang dari kecelakaan akibat kejut listrik, ketika bekerja pada system tegangan rendah atau kejut listrik yang disebabkan oleh muatan listrik statis yang terdapat pada panel-panel elektronik. Training ditekankan pada upaya untuk mencegah terjadinya bahaya kejut listrik ditempat kerja.  Dengan demikian setelah mengikuti pelatihan ini peserta akan dapat :

  • Mengenal Bahaya kejut listrik
  • Memahami cara pencegahan timbulnya bahaya listrik
  • Memahami standard instalasi electronic switchboard
  • Memahami cara melakukan pertolongan pada kecelakaan akibat kejut listrik

TRAINING MATERIAL OUTLINE :

  1. Basic Electrical Terminology
  2. Hazard of Electricity
  3. Electrical Safety
  4. Electrical/electronic Standard Installation
  5. Electrical and Gas Injuries
  6. Switchboard Rescue Preparation
  7. Switchboard Rescue
  8. Electrical Emergencys

PESERTA PELATIHAN :
Pelatihan ini diberikan pada para non-electrical engineer, tehnisi, operator maupun supervisor yang bekerja dalam system kelistrikan terutama yang bertanggung jawab atas keselamatan dan kesehatan kerja.

INSTRUCTOR :   Ir. Hasan Surya, MT. and Team

TEMPAT TRAINING :Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

DURASI TRAINING :3 hari

WAKTU TRAINING :

  • 09 Oct 2023-11 Oct 2023
  • 13 Nov 2023-15 Nov 2023
  • 27 Dec 2023-29 Dec 2023

HARGA INVESTASI/PESERTA : 

  1. Rp. 6.500.000/peserta (bayar penuh) atau
  2. Rp. 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp. 5.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

PLC Operation, Programming, Troubleshooting And Maintenance (BANDUNG)

Jadwal Training

PLC Operation, Programming, Troubleshooting And Maintenance (BANDUNG) Tanggal 09 Oct 2023-12 Oct 2023 28 Nov 2023-01 Dec 2023 18 Dec 2023-21 Dec 2023 Tempat Hotel ... Baca Selengkapnya

PLC Operation, Programming, Troubleshooting And Maintenance (BANDUNG)

Jadwal Training

PLC Operation, Programming, Troubleshooting And Maintenance (BANDUNG)

Tanggal

  • 09 Oct 2023-12 Oct 2023
  • 28 Nov 2023-01 Dec 2023
  • 18 Dec 2023-21 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DESCRIPTION:
Covers the concept and implementation of programmable logic controller (PLC) in industrial automation systems. Provides information for setting-up, operation and maintenance of PLC. Gives step by step ladder programming on PLC and implements basic functions of PLC.

TRAINING OBJECTIVE:
You will be able to:

  1. Understand the architecture and hardware of PLC
  2. Understand basic functions of PLC
  3. Understand Ladder diagram programming
  4. Understand Math function
  5. Understand Analog PLC operation
  6. Implement industrial automation using PLC
  7. Understand PLC wiring
  8. Understand PLC Troubleshooting
  9. Understand PLC maintenance

TRAINING MATERIAL OUTLINE:

  1. Introduction to PLC
  2. Hardware and Software
  3. PLC Configuration
  4. PLC Addressing
  5. PLC Programming
  6. Ladder Diagram
  7. ON-OFF Programming
  8. Timer, Counter, Drum Controller
  9. Bit/Shift Register
  10. Math Function
  11. Analog Module and Systems
  12. PLC wiring
  13. PLC Troubleshooting
  14. PLC Maintenance

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:

  1. Computer Facilities
  2. Practical work using PLC Siemens S7-300 or S7-200, Allen Bradley, Modicon Schneider, Yokogawa or OMRON
  3. Simulation using PLC Software
  4. Application using Simulator Kit

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :

  • Rp 8.750.000/person (full fare) or
  • Rp 8.500.000/person (early bird, payment 1 week before training) or
  • Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir. Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.

He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012).

He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004).

He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Hazardous Material Handling (BANDUNG)

Jadwal Training

Hazardous Material Handling (BANDUNG) Tanggal 09 Oct 2023-12 Oct 2023 27 Nov 2023-30 Nov 2023 11 Dec 2023-14 Dec 2023 Jam Pelaksanaan 09.00 – 16.00 ... Baca Selengkapnya

Hazardous Material Handling (BANDUNG)

Jadwal Training

Hazardous Material Handling (BANDUNG)

Tanggal

  • 09 Oct 2023-12 Oct 2023
  • 27 Nov 2023-30 Nov 2023
  • 11 Dec 2023-14 Dec 2023

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Ir. In Jumanda Kasdadi, MT is graduated from Chemical Engineering Bandung Institute of Technology (ITB)and now he is lecturer at chemical engineering poltek ITB (Polban). Ir. In Jumanda Kasdadi, MT has experienced to be instructors at industrial training more than 13 years, both either inhouse training or public training. Trainings that delivered by him for many companies such as for oil and gas, for mining, for manufacture and etc. held in some cities in Indonesia like Jakarta, Bandung, Batam and others.

Beside training, Ir.Injumanda Kasdadi,MT also have experiences at some professional engineering working such as:
Risk Assessment at oil & gas project of Processing at process design Facility for waste handling Piping and feasibility study of pipeline in onshore and offshore And others This much valuable experiences will be shared to participants in training class.

INVESTATION PRICE/ PERSON :

  • Rp. 8.500.000/person (full fare) or
  • Rp. 8.250.000/person (early bird, payment 1 week before training) or
  • Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Tas
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INTRODUCTION :
The training is designed for them who want to broaden the knowledge on chemical material safety. It will be beneficial for handling chemicals in the work, deciding on measures where chemical information is needed, safety representatives needing physical and chemical information on a specific substance, a factory inspector looking for Occupational Exposure Limits, guiding and educating others in the handling and use of chemical material.

TRAINING OBJECTIVES :

  1. Provide an introduction to the scope of hazardous substances and the problems they pose at the work places
  2. Improve the skills of participants in recognizing hazards and preventive safety work practices in relation of the transportation, storage, production and use of chemicals material
  3. Improve the skills of information retrieval and convey information to workers, employers and government officials

TRAINING MATERIAL OUTLINE :

  1. Objectives of practical chemical material safety programmes
  2. Law and Regulations on Handling of Hazardous Chemical material
  3. Introduction to the aspects of chemical safety
  4. Identification, classification and labelling of hazardous chemicals
  5. Safety in transport and storage (Warehousing system)
  6. Chemical safety data sheet
  7. Characteristic of Hazardous Chemicals & Wastes
  8. Hazards and Risk of Chemicals
  9. Waste Minimization & Recovery/ Recycling
  10. Engineering Consideration on Treatment and Disposal
  11. Treatment Processes & Disposal Methods
  12. Introduction on Hazard Analysis
  13. Preventive methods and control of chemical hazards
  14. Emergency Response Preparedness
  15. Discussion

WHO SHOULD ATTEND THIS TRAINING? :
Plant: Manager/ Engineer
Engineering: Maintenance, Facility & Project Manager/ Engineer
Production: Operation, Development & Process Manager/ Engineer
Logistic: PPIC, Warehouse, Tank Storage & Transportation Manager
HSE: Environmental/ Health & Safety Manager, Public Relation & Community Development Mgr.
Laboratory: Product Quality, Product Development & In-Process Control Manager.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pengetahuan Material Handling & Aplikasi (BANDUNG)

Jadwal Training

Pengetahuan Material Handling & Aplikasi (BANDUNG) Tanggal 03 Oct 2023-06 Oct 2023 13 Nov 2023-16 Nov 2023 12 Dec 2023-15 Dec 2023 Pukul 09.00-16.00 WIB ... Baca Selengkapnya

Pengetahuan Material Handling & Aplikasi (BANDUNG)

Jadwal Training

Pengetahuan Material Handling & Aplikasi (BANDUNG)

Tanggal
03 Oct 2023-06 Oct 2023
13 Nov 2023-16 Nov 2023
12 Dec 2023-15 Dec 2023

Pukul
09.00-16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pengantar
Training ini dirancang untuk memberikan pengetahuan dan pemahaman tentang sistem penanganan material yang merupakan salah satu fungsi dasar dalam industri, persoalan penanganan material atau barang muncul dalam pendistribusian, penggudangan, sistem produksi, pelabuhan, airport, pengaturan hasil perkebunan dll. Setelah training ini peserta diharapkan memahami dan mengerti tentang material handling dan aplikasi di perusahaan.

Tujuan Pelatihan

  1. Peserta diharapkan mampu memahami dan mengetahui prinsip dasar material handing
  2. Mampu mengetahui jenis dan sistem operasi dari peralatan-peralatan material handling
  3. Memahami hal-hal yang terkait dengan safety, dan aturan dasar dalam pengoperasian peralatan material handling
  4. Mampu melakukan analisis sederhana dalam melakukan pemilihan peralatan material handling
  5. Memahami sistem perawatan dan perbaikan peralatan material handling

Materi Traninig

  1. Principles of Material Handling
    • The Material Handling Function
    • Types of Material Handling Equipment
  2. Analysis For Material Handling Systems
    • Consideration of Material and Movement Conditions
    • Material Handling Analysis Techniques
  3. Hoisting Equipment
    • Main Types of Hoisting Equipment
    • General Characteristics of Hoisting Machines
    • Chains and Ropes
    • Load Handling Attachments
  4. Conveyor Systems
    • Types of Conveyors
    • Quantitative Relationships and Analysis of Conveyor Systems
  5. Belt Conveyor Systems
  6. Discussion and cases study

HARGA INVESTASI/PESERTA :  

  • Rp. 8.500.000/peserta (bayar penuh) atau
  • Rp. 8.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp. 7.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

Fasilitas

  1. Modul Training
  2. CD Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. Jaket atau rompi atau T-Shirt
  6. Tas atau ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Trainer :
Ir. Ating Sudradjat,MSc. adalah alumnus Teknik Industri ITB Bandung. Beliau adalah dosen Teknik Mesin di Politeknik ITB(POLBAN). Untuk mempertajam kemampuannya beliau sudah pernah terjun ke lapangan/perusahaan secara langsung, seperti Chief Technician di PT pamindo tiga t Jakarta selama 5 tahun, lalu menjadi Technical Manager di CV karya mandiri Bandung. Beliau juga pernah menjadi dosen di Polytechnic Education Development Center selama 11 tahun. Menjadi Technical Director di PT Pinangmas Energi Cakrawala Jakarta. Lalu di Cakrawala Optimus Explorer Bandung. Consultant & Trainer pada beberapa lembaga diantaranya di PT.MMS dan Logistic System di PT WKM. Beliau sudah sering mengajar pelatihan untuk perusahaan di Indonesia di bidang topik keahlian beliau diantaranya tentang material handling, maintenance, database system for Mechanical Engineering, Planning and Scheduling Maintenance dan lain-lain. Melalui pelatihan/training beliau akan sharing pengalaman dan kemampuan akademis beliau kepada peserta pelatihan.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Bearing Technology And Engine Lubrication System (YOGYAKARTA)

Jadwal Training

Bearing Technology And Engine Lubrication System (YOGYAKARTA) Tanggal 26 Sep 2023-29 Sep 2023 24 Oct 2023-27 Oct 2023 21 Nov 2023-24 Nov 2023 18 Dec ... Baca Selengkapnya

Bearing Technology And Engine Lubrication System (YOGYAKARTA)

Jadwal Training

Bearing Technology And Engine Lubrication System (YOGYAKARTA)

Tanggal
26 Sep 2023-29 Sep 2023
24 Oct 2023-27 Oct 2023
21 Nov 2023-24 Nov 2023
18 Dec 2023-21 Dec 2023

Pukul
09.00-17.00 WIB

TRAINING OBJECTIVES:

  1. Peserta dapat memahami karakteristik bantalan dan aplikasinya
  2. Peserta dapat memahami dan dapat memilih bantalan berdasarkan standar
  3. Peserta dapat melakukan monitoring assembly dan disassembly bantalan
  4. Peserta dapat menginspeksi kondisi bantalan

TRAINING MATERIAL OUTLINE:

  1. Jenis dan sifat bantalan
  2. Standar bantalan gelinding
  3. Assembly dan disassembly bantalan pada poros
  4. Assembly dan disassembly bantalan pada lubang
  5. Assembly dan disassembly bantalan dengan sleeve adaptor
  6. Assembly dan disassembly bantalan dengan pemanasan
  7. Clearance bantalan
  8. Inspeksi bantalan
  9. Kekuatan dan umur bantalan
  10. Macam sistem pelumasan
  11. Pelumas dan pemakaiannya
  12. Viscositas pelumas
  13. Standar dan pemilihan pelumas
  14. Standar grease dan pemakaiannya
  15. Penggunaan tools: peraga bantalan software(FAG), Peralatan Workshop Bantalan

WHO SHOULD ATTEND THIS TRAINING?:

  1. Mechanical Engineer / Supervisor
  2. Professionals
  3. Plant Maintenance / Operators / Supervisor / Superintendent

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

INVESTMENT PRICE/PERSON :

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUCTOR : Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

AC & Refrigeration : Principles, Operation And Troubleshooting (BANDUNG)

Jadwal Training

AC & Refrigeration : Principles, Operation And Troubleshooting (BANDUNG) TRAINING OBJECTIVES: Assisting the qualified engineer in refrigeration system Assisting the qualified engineer in air conditioning ... Baca Selengkapnya

AC & Refrigeration : Principles, Operation And Troubleshooting (BANDUNG)

Jadwal Training

AC & Refrigeration : Principles, Operation And Troubleshooting (BANDUNG)

TRAINING OBJECTIVES:

  1. Assisting the qualified engineer in refrigeration system
  2. Assisting the qualified engineer in air conditioning system

TRAINING MATERIAL OUTLINE:

  1. Basic refrigeration system
  2. Commercial cold rooms and frozen food storage room
  3. Dairy and farm milk cooling
  4. Transport refrigeration
  5. Industrial refrigeration system
  6. Machine and apparatus refrigeration system
  7. Trouble shooting refrigeration system
  8. Basic air conditioning system
  9. Single air system
  10. Air – water system
  11. All air system
  12. Dual duct system
  13. Machine and apparatus air conditioning system
  14. Trouble shooting air conditioning system

WHO SHOULD ATTEND THIS TRAINING?:

  1. Mechanical and Electrical Engineer / Supervisor
  2. Professionals
  3. Plant Maintenance / Operators / Supervisor / Superintendent

INSTRUCTOR: Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION:   4 days

TRAINING TIME :
02 Oct 2023-05 Oct 2023
06 Nov 2023-09 Nov 2023
11 Dec 2023-14 Dec 2023

INVESTMENT PRICE/PERSON :

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pengendalian Motor Listrik Secara Elektronik

Jadwal Training

Pengendalian Motor Listrik Secara Elektronik TRAINING OBJECTIVES: 1. Peserta memahami prinsip operasi pengendalian kecepatan motor 2. Peserta dapat melakukan troble shooting pada pengendalian kecepatan motor ... Baca Selengkapnya

Pengendalian Motor Listrik Secara Elektronik

Jadwal Training

Pengendalian Motor Listrik Secara Elektronik

TRAINING OBJECTIVES:
1. Peserta memahami prinsip operasi pengendalian kecepatan motor
2. Peserta dapat melakukan troble shooting pada pengendalian kecepatan motor

TRAINING MATERIAL OUTLINE:

  1. Pendahuluan
  2. OP – AMP Application
  3. Power semi conductor component
  4. Pengujian komponen semikonduktor
  5. Rangkaian penyulut Thyristor
  6. PWM Generator
  7. AC – DC Converter
  8. Speed control of DC motor
  9. DC Motor drive
  10. Trouble shooting on DC motor drive
  11. DC – AC Converter
  12. Speed control of induction motor
  13. AC Motor drives
  14. Trouble shooting on AC Motor drive

WHO SHOULD ATTEND THIS TRAINING?:

  1. Electrical & Mechanical Engineer / Supervisor
  2. Instrument Engineer / Supervisor
  3. Professionals
  4. Plant Maintenance / Operators / Supervisor / Superintendent

INSTRUCTOR : Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION : 4 days

TRAINING TIME :

  • 24 Jul 2023-27 Jul 2023
  • 31 Jul 2023-03 Aug 2023
  • 25 Sep 2023-28 Sep 2023
  • 23 Oct 2023-26 Oct 2023
  • 27 Nov 2023-30 Nov 2023
  • 18 Dec 2023-21 Dec 2023

INVESTMENT PRICE/PERSON :

  • Rp. 8.500.000/person (full fare) or
  • Rp. 8.250.000/person (early bird, payment 1 week before training) or
  • Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2026

Info Seminar | Jadwal Seminar