Kompresor Sentrifugal : Operasi, Pemeliharaan, dan Troubleshooting (BANDUNG)

Jadwal Training

Kompresor Sentrifugal : Operasi, Pemeliharaan, dan Troubleshooting (BANDUNG) Tanggal 20 Sep 2021-23 Sep 2021 25 Okt 2021-28 Okt 2021 08 Nop 2021-11 Nop 2021 06 ... Baca Selengkapnya

Kompresor Sentrifugal : Operasi, Pemeliharaan, dan Troubleshooting (BANDUNG)

Jadwal Training

Informasi Training Terbaru Update

Kompresor Sentrifugal : Operasi, Pemeliharaan, dan Troubleshooting (BANDUNG)

Tanggal
20 Sep 2021-23 Sep 2021
25 Okt 2021-28 Okt 2021
08 Nop 2021-11 Nop 2021
06 Des 2021-09 Des 2021

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TUJUAN/SASARAN TRAINING:

  1. Memberikan pengertian dasar tentang teori (mekanika fluida dan termodinamika) yang berkaitan dengan kompresor sentrifugal dan instalasinya,yang akan menjadi dasar pemahaman terhadap prinsip teori , cara kerja dan karakteristik kompresor sentrifugal beserta instalasinya (sistem) dan pengertian tentang gejala gejala fisik yang terjadi pada operasi.
  2. Memberikan pengertian  tentang karakteristik kompresor sentrifugal dan instalasinya (sistem) yang menjadi dasar pengenalan terhadap sifat sifat kompresor sentrifugal dan instalasinya serta pemahaman tentang dasar perancangan sistem,pemilihan kompresor,cara pengoperasian dan perlakuan terhadap kompresor sentrifugal beserta instalasinya.
  3. Memberikan pengenalan tentang jenis jenis kompresor dan komponen komponen utama serta karakteristiknya yang menjadi dasar pemahaman tentang konstruksi dan daerah kerja (kondisi operasi) kompresor.
  4. Memberikan dasar cara cara perawatan dan mengatasi masalah pada kompresor sentrifugal dan instalasinya
  5. Dengan semua hal di atas dan pengalaman peserta ,pada akhirnya para peserta pelatihan akan/diharapkan mempunyai  kemampuan mengoperasikan sistem dengan baik,mengenali gejala gejala yang terjadi selama operasi,merawat dan mengatasi masalah yang timbul pada operasi sistem kompresor sentrifugal ;dengan dilengkapi pengertian dasar perancangan sistem.

CAKUPAN MATERI TRAINING:
1.    Dasar Teori Mekanika Fluida dan Termodinamika
a.    Sifat sifat fisik dan termodinamik fluida (kompresibel) yang relevan
b.    Dasar aliran fluida (kompresibel)
c.    Dasar dinamika fluida
d.    Dasar proses energi pada fluida
e.    Kehilangan (losses) energi pada instalasi

2.    Dasar Teori Kompresor Sentrifugal dan Instalasinya
a.    Kebutuhan energi (head) dan tekanan pada instalasi
b.    Prinsip pemindahan energi pada kompresor sentrifugal
c.    Karakteristik instalasi dan kompresor (kapasitas, tekanan,efisiensi)
d.    Kombinasi antara instalasi dan kompresor
e.    Spesifikasi kompresor
f.    Pemilihan  kompresor (dengan dasar kapasitas,tekanan dan efisiensi kompresor)
g.    Perubahan sifat fisik gas pada proses didalam instalasi

3.    Gejala Gejala Kritis/Berbahaya pada Operasi
a.    Tekanan berlebih
b.    Tekanan negatif
c.    Temperatur berlebih (overheat)
d.    Fuktuasi tekanan
e.    Kondisi off design

4.    Operasi
a.    Prosedur menjalankan dan menghentikan kompresor
b.    Pengaturan kapasitas
c.    Pencegahan bahaya
d.    Operasi otomatik

5.    Perawatan/Pemeliharaan
a.    Pemeriksaan pendahuluan
b.    Pemeriksaan kondisi operasi
c.    Mengatasi gangguan

INVESTATION PRICE/PERSON :
1. Rp. 8.750.000/peserta (bayar penuh) atau
2. Rp. 8.500.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
3. Rp. 8.250.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Bag
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. I Nengah Diasta, M.Eng.  is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc.
Ir. I Nengah Diasta, M.Eng.  has much experiences in real practical work in project implementation and has collaborated with many institution and companies.
Ir. I Nengah Diasta, M.Eng.  has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc.  Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX,  Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Hydraulics Power System (BANDUNG)

Jadwal Training

Hydraulics Power System (BANDUNG) Tanggal 13 Sep 2021-17 Sep 2021 11 Okt 2021-15 Okt 2021 01 Nop 2021-05 Nop 2021 29 Nop 2021-03 Des 2021 ... Baca Selengkapnya

Hydraulics Power System (BANDUNG)

Jadwal Training

Hydraulics Power System (BANDUNG)

Tanggal

  • 13 Sep 2021-17 Sep 2021
  • 11 Okt 2021-15 Okt 2021
  • 01 Nop 2021-05 Nop 2021
  • 29 Nop 2021-03 Des 2021

Tempat:
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

YOU WILL LEARN:

  • Basic theory of hydraulics in relation to hydraulic power system
  • Basic calculation of hydraulic transmission power and knowledge about basic hydraulics circuit
  • The utilization of hydraulics system in industries and its advantages
  • Basic analyzing capability on simple hydraulic circuit

TRAINING MATERIAL OUTLINE :
1. Introduction to Fluid Power

  • History of Fluid Power
  • Advantages of Fluid Power
  • Application of Fluid Power
  • Component of a Fluid Power System
  • Type of Fluid Power Systems
  • The Fluid Power Industry

2. Properties of Hydraulic Fluids

  • Fluids
  • Weight, Density and Specific Gravity
  • Pressure, Head and Force
  • The Metric SI System
  • Pascal Law
  • Bulk Modulus
  • Viscosity and Viscosity Index
  • Oxidation and Corrosion Prevention
  • Fire and Foam Resistance Fluids
  • Lubricating Ability
  • General Types of Fluids

3. Energy and Power in Hydraulic Systems

  • Review of Mechanics
  • Application Pascal Law
  • Conservation of Energy
  • Hydraulic Horse Power
  • Bernoulli Equation
  • Energy, Power and Flow rates in SI system

4. The Distribution System

  • Sizing Flow rate requirement
  • Pressure Rating of Conductors
  • Steel Pipes
  • Steel Tubing
  • Plastic Tubing
  • Flexible Hoses
  • Quick Disconnect Couplings

5. Basic Hydraulic Flow in Pipes

  • Laminar and Turbulent Flow
  • Reynolds number
  • Darcy’s Equation
  • Frictional Losses in Laminar and Turbulent Flow
  • Losses in Valves and Fittings
  • Equivalent Length Technique
  • Hydraulic Circuit Analysis
  • Flow Measurement
  • Pressure Measurement

6. The Source of Hydraulic Power

  • Pumping Theory
  • Pump Classification
  • Gear pump
  • Vane pump
  • Piston Pump
  • Pump Performance
  • Pump selection
  • Pressure Intensifier
  • Pump Performance rating

7. Fluid Power Actuators

  • Linear hydraulic actuators
  • Limited Rotation Hydraulic Actuator
  • Vane motors
  • Piston Motors
  • Hydraulic Motor Performance
  • Hydrostatic transmissions
  • Electro hydraulic Stepping Motors
  • Low Speed High Torque Motors

8. Control Components in Hydraulic Systems

  • Directional Control Valves
  • Pressure Control Valves
  • Flow Control Valves
  • Servo Valves
  • Hydraulic Fuses
  • Pressure and Temperature Switch
  • Shock Absorber

9. Hydraulic Circuit Design and Analysis

  • Control Single Acting Hydraulic Cylinder
  • Control of Double Acting Cylinder
  • Regenerative Circuit
  • Pump unloading Circuit
  • Double Pump Hydraulic System
  • Pressure Intensifier Circuit
  • Counter Balance Valve Application
  • Hydraulic cylinder sequencing circuit
  • Fail safe circuits
  • Speed Control Of a Hydraulic Motor
  • Hydrostatic Transmission System

INVESTATION PRICE/PERSON :
Rp 9.750.000/person (full fare) or
Rp 9.500.000/person (early bird, payment 1 week before training) or
Rp 9.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. I Nengah Diasta, M.Eng. is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc.

Ir. I Nengah Diasta, M.Eng. has much experiences in real practical work in project implementation and has collaborated with many institution and companies.

Ir. I Nengah Diasta, M.Eng. has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc. Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX, Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.

 

Hotel Golden Flower, Bandung

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

HSE Management System Internal Auditor (BANDUNG)

Jadwal Training

HSE Management System Internal Auditor (BANDUNG) TRAINING TIME : 13 Sep 2021-16 Sep 2021 25 Okt 2021-28 Okt 2021 08 Nop 2021-11 Nop 2021 06 ... Baca Selengkapnya

HSE Management System Internal Auditor (BANDUNG)

Jadwal Training

HSE Management System Internal Auditor (BANDUNG)

TRAINING TIME :

  • 13 Sep 2021-16 Sep 2021
  • 25 Okt 2021-28 Okt 2021
  • 08 Nop 2021-11 Nop 2021
  • 06 Des 2021-09 Des 2021

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :    4 days

OBJECTIVES :
The participant will :

  1. Understand the requirements of HSE Auditing
  2. Understand how to conduct HSE Audit, documented and reporting

TRAINING MATERIAL OUTLINE :

  1. Overview Of Auditing Requirements
  2. Review Of ISO 14001/ OHSAS 18001 Requirements
  3. Understanding Environmental Aspects/ Impacts, Risk Assessment And Their Significance
  4. Preparing For Integrated Audit
  5. Conducting Audits (Documentation Review, Interviews And Site Inspection)
  6. Reporting Audit Findings
  7. Practical Exercises

PARTICIPANTS :

  1. Anggota  manajemen perusahaan yang bertugas untuk pelaksanaan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK-3) di perusahaan.
  2. Praktisi di bidang pelaksanaan manajemen K-3 pada umumnya.
  3. Superintendents, Supervisors bidang Operasi, Maitenance, Engineering, Services dan Personalia, LSM Bidang K3.

INSTRUCTOR :   Ir. Sudiharto, MT. and Team

INVESTATION PRICE/PERSON :     

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with Full AC facilities and multimedia
  • Lunch and twice coffeebreak every day of training
  • Qualified Instructor
  • Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Sudiharto, MT,  is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and  expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003. Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi,  blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM  and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :
1.    Electric Submercible Pump, Problem and Trouble Shooting Mecanism
2.    Crude Oil Analysis
3.    Drilling, Production and Workover Strategy
4.    Well Workover and Completion Stretegy
5.    Petroleum Finance, Acconting and Reservoir Management
6.    Plan of Development in Oil and Gas Industries
7.    Pressure Control for Drilling Engineer
8.    Plan of Development (POD) & Authorization For Expenditures (AFE)
9.    Management Skills Secretary Petroleum Gas and Oil Industries
10.  Pressure Transient Analysis and Well Testing Data Interpretation
11.    Oil Production System and Operation
12.    Formation Damaged and Well Stimulation
13.    Simulasi Reservoir for Petroleum Engineer
14.    Oil and gas transportation/measurement, etc

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pump : Operation, Maintenance And Troubleshooting (BANDUNG)

Jadwal Training

Pump : Operation, Maintenance And Troubleshooting (BANDUNG) WAKTU TRAINING : 12 Okt 2021-06 Okt 2021 01 Nop 2021-03 Nop 2021 29 Nop 2021-01 Des 2021 ... Baca Selengkapnya

Pump : Operation, Maintenance And Troubleshooting (BANDUNG)

Jadwal Training

Pump : Operation, Maintenance And Troubleshooting (BANDUNG)

WAKTU TRAINING :
12 Okt 2021-06 Okt 2021
01 Nop 2021-03 Nop 2021
29 Nop 2021-01 Des 2021

TEMPAT TRAINING :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

DURASI TRAINING :   4 hari

LATAR BELAKANG & TUJUAN :
Pembekalan para trainee dengan pengetahuan atau kecakapan yang terkait dengan suatu mesin, akan menambah pemahaman, melengkapi konsideransi-konsideransi dan meningkatkan kemampuan dalam penanganan masalah-masalah lapangan mesin yang bersangkutan. Pelatihan yang akan diadakan mempunyai tujuan seperti yang tertera pada butir-butir berikut :

  • Memahami prinsip kerja pompa.
  • Memahami kelebihan dan kekurangan masing-masing jenis pompa.
  • Memahami spesifikasi masing-masing jenis pompa.
  • Memahami spesifikasi sistem instalasi.
  • Memahami parameter operasi.
  • Mampu mengevaluasi unjuk kerja pompa.
  • Mampu menangani kelainan operasi ( trouble ).
  • Memahami dan mampu melaksanakan perawatan.
  • Mampu meramalkan unjuk kerja pompa termodifikasi.

CAKUPAN MATERI TRAINING:

  1. Komponen utama pompa dan fungsinya
  2. Komponen-komponen pembantu: diffuser, packing/sealing, bearings dan balancing drum/ piston
  3. Pompa sentrifugal, aliran campuran dan aksial
  4. Kecepatan spesifik
  5. Faktor-faktor penentu besarnya head, kapasitas aliran dan prestasi pompa
  6. Sistem : head statik dan dinamik (head mayor dan minor)
  7. Titik kerja ( matching point) operasi
  8. Operasi tunggal, seri dan paralel
  9. Kendala-kendala operasi :
    Kavitasi : NPSH tersedia, NPSH persyaratan

    • Tinggi hisap
    • Minimum flow
    • Water-hammer
    • Seizure (panas, gesekan, kegagalan pelumasan dll).
  10. Operasi :
    • Start-up dan shut-down
    • Kegagalan operasi (trouble-shooting): gejala, sebab dan tindakan
  11. Kecepatan putar kritis
  12. Instalasi pompa dan sistem
  13. Perawatan : routine, terjadwal, break-down
  14. Material
  15. Studi kasus
  16. Diskusi

INVESTMENT PRICE/PERSON :

  • Rp. 8.750.000/person (full fare) or
  • Rp. 8.500.000/person (early bird, payment 1 week before training) or
  • Rp. 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Pawito Merto Sontowiro, M.Sc. and Team

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Human Machine Interface (HMI) BANDUNG

Jadwal Training

Human Machine Interface (HMI) BANDUNG Tanggal 27 Sep 2021-30 Sep 2021 05 Okt 2021-08 Okt 2021 01 Nop 2021-04 Nop 2021 20 Des 2021-23 Des ... Baca Selengkapnya

Human Machine Interface (HMI) BANDUNG

Jadwal Training

Human Machine Interface (HMI) BANDUNG

Tanggal
27 Sep 2021-30 Sep 2021
05 Okt 2021-08 Okt 2021
01 Nop 2021-04 Nop 2021
20 Des 2021-23 Des 2021

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DESCRIPTION:
Covers concept of interaction between machine and human, presentation of information, alarm, management of alarm, data trending. Provide human machine interface types and related hardware/software. Understands communication between human machine interface (HMI) and PLC. Develop human machine interface.

TRAINING OBJECTIVE:
You will be able to:

  1. Understand the concept of HMI
  2. Understand the concept of anthropometry
  3. Understand alarm management
  4. Know types of data presentation
  5. Identify the requirement for HMI development
  6. Use and implement HMI
  7. Understand the concept of advanced process control

TRAINING MATERIAL OUTLINE:

  1. Introduction Human Machine Interface
  2. HMI Anthropometry
  3. Introduction Open Process Control (OPC)
  4. Alarm Management
  5. Data Trending
  6. Hardware HMI
  7. Software HMI
  8. Programming HMI
  9. Study Case
  10. Laboratory Work

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:

  • Computer Facilities with Personal Computer Intel Pentium III and 4
  • Practical work using PLC: Siemens or Schneider
  • WONDERWARE InTouch
  • Application using Simulator Kit

PREREQUISITE:  Have Knowledge on PLC

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  1. Rp 8.500.000/person (full fare)  or
  2. Rp 8.250.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.

He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012).

He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004).

He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Safety Instrumented Systems (SIS) : ISA, IEC (BANDUNG)

Jadwal Training

Safety Instrumented Systems (SIS) : ISA, IEC (BANDUNG) Tanggal 23 Jan 2023-26 Jan 2023 20 Feb 2023-23 Feb 2023 07 Mar 2023-10 Mar 2023 10 ... Baca Selengkapnya

Safety Instrumented Systems (SIS) : ISA, IEC (BANDUNG)

Jadwal Training

Safety Instrumented Systems (SIS) : ISA, IEC (BANDUNG)

Tanggal
23 Jan 2023-26 Jan 2023
20 Feb 2023-23 Feb 2023
07 Mar 2023-10 Mar 2023
10 Apr 2023-13 Apr 2023
09 May 2023-12 May 2023
13 Jun 2023-16 Jun 2023
24 Jul 2023-27 Jul 2023
31 Jul 2023-03 Aug 2023
25 Sep 2023-28 Sep 2023
23 Oct 2023-26 Oct 2023
07 Nov 2023-10 Nov 2023
12 Dec 2023-15 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION:
Most of today’s computer controlled industrial processes involve large amounts of energy and have the potential for devastating accidents. Reliable, well-engineered safety systems are essential for protection against destruction and loss of life. This course  is an intensive practical and valuable exposure to the most vital, up-to-date information and practical know-how to enable you to participate in hazard studies and specify, design, install and operate the safety and emergency shutdown systems in your plant, using international safety practices. This course will provide you with a broad understanding of the latest safety instrumentation practices and their applications to functional safety in manufacturing and process industries. This course could save your business a fortune in possible downtime and financial loss.

The objectives of the course are to:

  1. Expand your practical knowledge in the application of safety instrumented systems (SIS) as applied to industrial processes
  2. Provide you with the knowledge of the latest standards dealing with each stage o the safety life cycle from the initial evaluation of hazards to the detailed engineering and maintenance of safety instrumented systems
  3. Give you the ability to plan hazard and risk assessment studies, then design, implement and maintain the safety systems to ensure high reliability
  4. Assist your company to implement functional safety measures to international standards

Although a basic understanding of electrical engineering principles is essential, even those with a superficial knowledge will substantially benefit by attending this course. In particular, if you work in any of the following areas, you will benefit: Instrumentation and control engineers and technicians, Design, installation and maintenance engineers and technicians in the process industries, Managers and sales professionals employed by end users, Systems integrators or consultants, Consulting electrical engineers, Plant engineers and instrument technicians, Operations technicians, Electrical maintenance technicians and supervisors, Instrumentation and control system engineers, Process control engineers, Mechanical engineers

TRAINING MATERIAL OUTLINE:

  1. Introduction to SIS
  2. Definitions, Overview, Standards
  3. IEC 61508, IEC 61511 and ISA S84
  4. Hazards and Risk Reduction
  5. Hazard Studies
  6. Layers of Protection Analysis (LOPA)
  7. Safety Requirements Specifications
  8. Safety Integrity Level (SIL)
  9. Technology Choices
  10. Conceptual Design
  11. Reliability Analysis
  12. Safety in Field Instruments and Devices
  13. Engineering the Safety Systems Hardware
  14. Engineering the Application Software
  15. Overall Planning
  16. Installation and Commissioning
  17. Validation and Operation
  18. Management of Change
  19. Justification of SIS

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:
Study case or YOKOGAWA PROSAFE RS

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  1. Rp 8.500.000/person (full fare)  or
  2. Rp 8.250.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.

He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012).

He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004).

He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Kontrol Elektrik (BANDUNG)

Jadwal Training

Kontrol Elektrik (BANDUNG) Tanggal 20 Sep 2021-23 Sep 2021 26 Okt 2021-29 Okt 2021 01 Nop 2021-04 Nop 2021 29 Nop 2021-02 Des 2021 Tempat ... Baca Selengkapnya

Kontrol Elektrik (BANDUNG)

Jadwal Training

Kontrol Elektrik (BANDUNG)

Tanggal

20 Sep 2021-23 Sep 2021
26 Okt 2021-29 Okt 2021
01 Nop 2021-04 Nop 2021
29 Nop 2021-02 Des 2021

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

TUJUAN:
Memberikan suatu wawasan industri dalam merancang kontrol elektrik yaitu penggunaan komponen elektrik sebagai alternatif sistem kontrol (Solid state control) dalam penerapannya di industri.

OBJEKTIF:

  1. Dapat menggambar rangkaian elektrik
  2. Mampu merancang rangkaian kontrol elektrik sebagai bagian dari sistem kontrol
  3. Mampu merancang pengontrolan dengan algoritma sistem logik
  4. Dapat menggunakan modul-modul kontrol seperti pewaktu (timer) dan pencacah (counter)
  5. Dapat merancang dan  membuat rangkaian kontrol elektrik untuk gerakan berurutan (sequential) dan gerakan kondisional (conditional)
  6. Mampu merancang rangkaian kontrol panel elektrik sebagai bagian terpisah dari kontrol gerakan
  7. Mampu melakukan penelurusan masalah meliputi pengamatan, penyebab dan mengatasinya

CAKUPAN MATERI TRAINING:

  1. Listrik Dasar
  2. Input elektrik dan elektronik
  3. Output elektrik dan elektronik
  4. Fungsi dan penggunaan komponen-komponen elektrik
  5. Pengantar digital (Operator AND, OR dan NOT ) secara elektrik
  6. Simulasi rangkaian kontrol elektrik (Menggunakan Software)
  7. Pengontrolan gerakan menggunakan metode Intuitif dan Set-Reset
  8. Penggunaan Timer dan Counter elektrikal
  9. Sistem kontrol urutan (sequential) kompleks
  10. Metode Latching dan penerapannya pada kondisi overlap signal
  11. Single/Countinous mode
  12. Emergency , stop function
  13. Auto / Manual
  14. Trouble Shooting

SASARAN PESERTA:
Sarjana teknik, pengawas dan teknisi yang bergerak dibidang perancangan perakitan, Penggunaani atau pemeliharaan sistem kontrol elektrik

INVESTMENT PRICE/PERSON :

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified 
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Aris Suryadi, MT  adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti  Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pelumasan dan Sistem Pelumasan (BANDUNG)

Jadwal Training

Pelumasan dan Sistem Pelumasan (BANDUNG) Tanggal 20 Sep 2021-23 Sep 2021 04 Okt 2021-07 Okt 2021 22 Nop 2021-25 Nop 2021 20 Des 2021-23 Des ... Baca Selengkapnya

Pelumasan dan Sistem Pelumasan (BANDUNG)

Jadwal Training

Pelumasan dan Sistem Pelumasan (BANDUNG)

Tanggal
20 Sep 2021-23 Sep 2021
04 Okt 2021-07 Okt 2021
22 Nop 2021-25 Nop 2021
20 Des 2021-23 Des 2021

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Ir. Ali Mahmudi, M.Eng. graduated from mechanical and system engineering department RMIT Melbourne Australia for his magister and from Mechanical Engineering Bandung Institute of Technology (ITB) for his bachelor. His core expertise is in fluid and thermal energy convertion machine. Ir. Ali Mahmudi, M.Eng. is lecturer at mechanical engineering Poltek ITB (Polban), and at mechanical engineering PEDC and also at faculty of technique UNISBA(Universitas islam Bandung). In campus he teach for subjects as follows Termodinamika Teknik, Mekanika Fluida, Perpindahan Kalor & Penukar Kalor, Pompa & Kompresor, Boiler & Turbin, Pneumatik & Hidrolik, Mekatronika, Mesin Konversi Energi Fluida & Termal, Teknik perawatan & Perbaikan Mesin, Instrumentasi, Mekanika & Mesin Fluida, and Penggerak Mula. Ir. Ali Mahmudi, M.Eng. has frequently taught training for companies in Indonesia for many topics included in his majoring expertise.

Ir. M. Munir Fahmi, Dipl.ME, MT. got his master degree from Brawijaya University Malang majoring in Energy Conversion. He is till now becoming lecturer at mechanical engineering Poltek ITB (Polban) and he is head of laboratory of fluid, thermal and otomotive. He teachs frequently for industrial training class for Indonesian companies participants for some topics on mechanical engineering such as Mechanical Rotating Equipment, Operation & Trouble Shooting, Pumps, Primover: Operation, Maintenance & Troubleshooting, Genset, Operation, Maintenance & Trouble Shooting, lubrication, Preventive & Predictive Maintenance, Advance Maintenance Management, Reliability Maintenance Engineering, Operation, Maintenance & Trouble Shooting of Pump & Compressor and etc.

INVESTATION PRICE/PERSON :

1. Rp. 8.500.000/peserta (bayar penuh) atau
2. Rp. 8.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
3. Rp. 7.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Tas
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING OBJECTIVES:

  1. Pemilihan pelumas dan bahan aditive yang sesuai dengan kebutuhan
  2. Pemilihan dengan benar penggunaan pelumas-grease atau pelumas-oli
  3. Penyusunan prosedur lubrikasi untuk peralatan industri
  4. Penyusunan prosedur untuk draining dan flushing pada sistem lubrikasi
  5. Penyusunan kondisi dan jumlah pelumas di reservoir dan sump dengan benar
  6. Penyusunan jumlah cadangan pelumas yang optimal
  7. Penyusunan prosedur handling dan penyimpanan pelumas

TRAINING MATERIAL OUTLINE:

  1. Prinsip dan jenis-jenis pelumasan
  2. Klasifikasi pelumas dan aditive
  3. Pelumas mineral, sintetik dan vegetable
  4. Minyak pelumas dan grease
  5. Pelumas ramah lingkungan
  6. Sistem pelumasan terpusat dan terpisah
  7. Menentukan frekuensi dan kuantitas pelumasan
  8. Kontaminasi, filtrasi, rekondisi pelumas
  9. Penyimpanan pelumas: keselamatan kerja,container pelumas,handling pelumas dan penanganan limbah pelumas
  10. Oil seal: tipe dan pemilihannya
  11. Pelumas pada bantalan gelinding
  12. Pelumas untuk mesin perkakas
  13. Pengendalian Pelumas
  14. Pelumas untuk motor torak
  15. Pelumas untuk sistem hidrolik dan transmisi
  16. Workshop Manajemen Pelumasan
  17. Diskusi dan Tanya jawab

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pump And Compressor : Operation, Maintenance & Troubleshooting (BANDUNG)

Jadwal Training

Pump And Compressor : Operation, Maintenance & Troubleshooting (BANDUNG) Tanggal 27 Sep 2021-01 Okt 2021 04 Okt 2021-08 Okt 2021 15 Nop 2021-19 Nop 2021 ... Baca Selengkapnya

Pump And Compressor : Operation, Maintenance & Troubleshooting (BANDUNG)

Jadwal Training

Pump And Compressor : Operation, Maintenance & Troubleshooting (BANDUNG)

Tanggal
27 Sep 2021-01 Okt 2021
04 Okt 2021-08 Okt 2021
15 Nop 2021-19 Nop 2021
13 Des 2021-17 Des 2021

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVE :
After completion of the course, the participants should be able to describe and demonstrate thoroughly of Pump and compressor. Identify component by names, operation, maintenance and inspection. Describe the proper care, removal alignment and installation of Pump & compressor and their accessories.

TRAINING MATERIAL OUTLINE :
1.    Fundamental of fluid mechanics and thermodynamic
a.    Properties of fluids
b.    Measurement unit
c.    Basic of fluids dynamic
d.    Energy losses in pipe installation
e.    The gas Laws
f.    Specific Heat
g.    Compression process
h.    Compression Work
i.    Multistage compression

2.    Pressure loss at gas pipe installation
a.    Definition and accuracy
b.    Factors to estimate friction loss
c.    Pressure gradient in pipe
d.    Fitting pressure loss
e.    Flexible pipe pressure loss

3.    Pump Classification & Construction
a.    Pump Classification
b.    Pump construction and components

4.    Pump Installation & Operation
a.    Head or energy requirement of the installation
b.    The principle of energy transfer in centrifugal pump
c.    Characteristic of pump and its installation (Capacity, Head, and Efficiency)
d.    Combination of pump and installation
e.    Pump specification
f.    Pump selection based on capacity, head, and efficiency
g.    Pump arrangement; series and parallel
h.    Suction analysis (Cavitation and NPSH)

5.    Pump Maintenance and Troubleshooting.

6.    Fundamental Theory of Compressor
a.    Compressor development history
b.    Compressor classification
c.    Compressor work cycle
d.    Centrifugal compressor
e.    Head, losses and efficiency
f.    Characteristic at each speed
g.    Compressor installation

7.    Dynamic Compressor
a.    Performance & condition definition
b.    Type of centrifugal compressor
c.    Package assembly
d.    Multi casing unit
e.    Centrifugal compressor application
f.    Characteristic of centrifugal compressor
g.     General detail of centrifugal compressor
h.    Pressure ratio and centrifugal characteristic curve
i.    Control of capacity
j.    Inner gear air centrifugal compressor
k.    Axial flow compressor

8.    Positive Displacement Compressor
a.    Application of theory
b.    Reciprocating compressor

9.    Compressor Installation, Operation and Maintenance
a.    Installation
b.    Field testing
c.    Operation
d.    Inspection and maintenance

WHO SHOULD ATTEND THIS TRAINING?
Pump and compressor operator, supervisor, and to whom may concern in pump and gas-compressor operation and maintenance.

PRACTICAL SESSION :
1.    Pengujian pressure drop aliran pipa
2.    Pengujian system pompa terpasang
3.    Pengujian prestasi pompa
4.    praktikal untuk rotary screw compressor dan air dryer

TRAINING DURATION :   5 days

INVESTATION PRICE/PERSON

  • Rp 9.750.000/person (full fare) or
  • Rp 9.500.000/person (early bird, payment 1 week before training) or
  • Rp 9.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. I Nengah Diasta, M.Eng.  is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc.

Ir. I Nengah Diasta, M.Eng.  has much experiences in real practical work in project implementation and has collaborated with many institution and companies.

Ir. I Nengah Diasta, M.Eng.  has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc.  Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX,  Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Production Safety System (BANDUNG)

Jadwal Training

Production Safety System (BANDUNG) Tanggal 27 Sep 2021-01 Okt 2021 11 Okt 2021-15 Okt 2021 08 Nop 2021-12 Nop 2021 06 Des 2021-10 Des 2021 ... Baca Selengkapnya

Production Safety System (BANDUNG)

Jadwal Training

Production Safety System (BANDUNG)

Tanggal
27 Sep 2021-01 Okt 2021
11 Okt 2021-15 Okt 2021
08 Nop 2021-12 Nop 2021
06 Des 2021-10 Des 2021

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION / BACKGROUND :
The possible consequences of hazardous situations that may occur on all onshore and offshore production facilities are the same such as : fire or explosion ; land, air and water pollution ; damage to production equipment ; and injury to people or personnel. The goal of a production safety system design is to reduce the risk of the identified hazards to a reasonable level.
The main principles (“Four Principles”) for production safety system design and operation are :

  • Containing hydrocarbons
  • Minimizing the chances of ignition
  • Preventing fire escalation and equipment damage
  • Providing for personnel protection and escape

TRAINING OBJECTIVES AND BENEFITS :
After attending this valuable and interesting training, the participants will be able to :

  • Understand and implement the principles of Production Safety System.
  • Conduct formal hazard identification and assessment for proper application of the above “Four Principles”.
  • Conduct safe and proper operation of production equipment and its maintenance as well as all production safety system.

TRAINING MATERIAL OUTLINE :

  1. Introduction to RI Government Regulations of HSE Aspects in Oil & Gas Production Operations (On-Shore & Off-Shore)
  2. Introduction to International Recognized Industry Codes, Guidelines, Recommended Practices and Standards in relation with Oil & Gas Production Safety System Design and Operations
  3. Hazard Tree Analysis for Oil & Gas Production Facility
  4. Oil Wells Operations Safety System both Natural Flowing Wells and Artificial Lift Wells include Surface & Sub Surface Safety Systems
  5. Gas Wells Operations Safety System include Surface and Sub Surface Safety Systems
  6. Oil & Gas Flow Lines Operations Safety System
  7. Oil & Gas Manifolds Operations Safety System
  8. Oil & Gas Separators Operations Safety System ; Flare, Vent & Drain, PSV, Rupture Disc Safety Systems
  9. Free Water Knock Out (FWKO) Operations Safety System
  10. Heater Treater Operations Safety System
  11. Gas Scrubber/Gas Boots Operations Safety System
  12. Storage Tanks, Transfer Pumps and Compressors Operations Safety Systems
  13. Case Study, VCD/Film Show, Pre-Course Assessment (Pre-Test) & Post-Course Assessment (Post-Test)

WHO SHOULD ATTEND ?
Production Department personnel such as Operators/Technicians/Well Testers, Foremen and Supervisors. Process Engineers, Production Engineers, HSE Officers/Specialists and whoever are interested with ‘Production Safety System’

INVESTMENT PRICE/PERSON :
1. Rp 9.750.000/person (full fare) or
2. Rp 9.500.000/person (early bird, payment 1 week before training) or
3. Rp 9.250.000/person (if there are 3 or more participants from the same company)

FASILITAS UNTUK PESERTA :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Didi Sugandi Bc.M (Course Leader) and his partners: Ir. Eddy Bachri MK3 and Ir. Arseno Prijatman MK3. Didi Sugandi was graduated as Petroleum Engineer, 40 years (1970-2010) ‘hands-on’ work experience in Oil/Gas/Geothermal Exploration & Production Companies (Stanvac Pendopo South Sumatera, Huffco/Vico East Kalimantan, Karaha Bodas Company/KBC Garut West Java, Sumitomo Corp. Pangalengan West Java, JOB Pertamina-Gulf Jambi) in various departments (Production, HRD, HSE) include 1 (one) month (1983) as Flopetrol Production Well Testing Trainee in Total Indonesie (Offshore Oil/Gas Company) Handil Field East Kalimantan and 6 months (1996) as HSE Consultant at Lasmo Oil PLC Malacca Strait (Offshore Oil/Gas Company) and 7 years (2003-2010) as HSE Consultant/Auditor/Trainer of PT Surveyor Indonesia in Drilling and Completion Dept. PT Caltex/Chevron Pacific Indonesia (CPI) Sumatera Operations Area. He has also 18 years experience (1992-2010) as a Petroleum, HSE, Human Resources & Security Trainer both In-House and Public Trainings.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Heavy Equipment Management (BANDUNG)

Jadwal Training

Heavy Equipment Management (BANDUNG) TUJUAN TRAINING: Agar peserta memahami bagaimana memilih, mengatur, pembuatan jadwal pemakaian alat berat. CAKUPAN MATERI TRAINING : Pedahuluan Alat berat pada ... Baca Selengkapnya

Heavy Equipment Management (BANDUNG)

Jadwal Training

Heavy Equipment Management (BANDUNG)

TUJUAN TRAINING:
Agar peserta memahami bagaimana memilih, mengatur, pembuatan jadwal pemakaian alat berat.

CAKUPAN MATERI TRAINING :

  1. Pedahuluan
  2. Alat berat pada industri
  3. Klasifikasi alat berat
  4. Alat Penggerak (Tractor)
  5. Klasifikasi
  6. Komponen utama
  7. Cara kerja
  8. Pemilihan dan penentuan kapasitas
  9. Alat Gusur (Bulldozer)
  10. Klasifikasi
  11. Komponen utama
  12. Cara kerja
  13. Pemilihan dan penentuan kapasitas
  14. Alat-alat gali (Excavator)
  15. Klasifikasi
  16. Komponen utama
  17. Cara kerja
  18. Pemilihan dan penentuan kapasitas
  19. Mekanikal Alat berat
  20. Penggerak mula alat berat
  21. Sistem pelumasan dan pendinginan
  22. Sistem hidrolik dan pneumatik

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?:
Engineer & Operator serta semua pihak yang ingin memahami topik ini.

INSTRUCTOR : Ir. Syahbardia, MT. dan Tim

VENUE :Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION :4 days

TRAINING TIME :
07 Sep 2021-10 Sep 2021
04 Okt 2021-07 Okt 2021
01 Nop 2021-04 Nop 2021
29 Nop 2021-02 Des 2021

INVESTMENT PRICE/PERSON :

  • Rp. 8.500.000/person (full fare) or
  • Rp. 8.250.000/person (early bird, payment 1 week before training) or
  • Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisimateri training
  3. Sertifikat
  4. ATK: NoteBookdan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training denganfasilitas Full AC dan multimedia
  9. Makansiangdan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasiuntukpesertadari hotel penginapanke hotel tempat training – PP (jikapeserta minimal dari satu perusahaanada 4 peserta)

INSTRUKTUR TRAINING
Ir.SYAHBARDIA, MT. alumni dari teknik mesin Institut teknologi Bandung, ITB (sarjana), dan teknik material ITB untuk program magister. Beliau pernah menjadi dosen di Politeknik ITB/POLBAN dan sekarang Beliau menjadi dosen di jurusan teknik di universitas Pasundan, Bandung. Beliau memiliki pengalaman lapangan praktis sebagai mechanical engineer ketika beliau bekerja, seperti di IPTN, PINDAD, dan PAL. Ir. Syahbardia,MT. sudah sering menjadi instruktur di training-training industri untuk perusahaan-perusahaan di Indonesia. Diantara judul-judul yang Beliau sampaikan adalah Predictive and Preventive Pump Maintenance, Compressor Characteristic Maintenance & Troubleshooting, Rotary Equipment Maintenance, Lubrication, Operation, Maintenance and Trouble Shooting, Materials Selection and Knowledge for Engineers, Centrifugal Compresor & Steam Turbine Performance, Welding Inspection, Turbine & Generator Operation, Boiler Water Treatment, Pump Operation and Maintenance, Electrical Motor Control System, Corrosion and Cathodic Protection, Fluid Flow Measurement, Generator Preventive Maintenance, Heavy Equipment Management, Preventive and Predictive Maintenance, dan lain-lain.

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Petroleum Engineering For Non Petroleum Engineers (BANDUNG)

Jadwal Training

Petroleum Engineering For Non Petroleum Engineers (BANDUNG) Tanggal 27 Sep 2021-29 Sep 2021 04 Okt 2021-06 Okt 2021 03 Nop 2021-05 Nop 2021 01 Des ... Baca Selengkapnya

Petroleum Engineering For Non Petroleum Engineers (BANDUNG)

Jadwal Training

Petroleum Engineering For Non Petroleum Engineers (BANDUNG)

Tanggal

  • 27 Sep 2021-29 Sep 2021
  • 04 Okt 2021-06 Okt 2021
  • 03 Nop 2021-05 Nop 2021
  • 01 Des 2021-03 Des 2021

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain. Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

Harga

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Tas
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

SASARAN TRAINING :
Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  1. Memahami prinsip-prinsip dasar eksploitasi minyak, gas bumi yang dikenal sebagai teknologi perminyakan.
  2. Melakukan diagnosis sederhana dan memahami pengelolaan data operasi perminyakan, seperti data geologi produksi, data batuan dan fluida reservoir, data produksi, data operasi pemboran bahkan data analisis keekonomian.
  3. Membuat analisis sederhana terhadap data tersebut dan melakukan pengolahannya dengan mempergunakan metoda standar dalam teknologi perminyakan.
  4. Melakukan perhitungan-perhitungan kuantitatif sederhana dari seluruh data perolehan operasi perminyakan : geologi produksi, evaluasi data formasi produktif, data reservoir, data pemboran, data produksi bahkan data keekonomian.

PRE-REQUISITE :
Latar belakang beragam : Operator, Sr. Operator, Engineering dan Non Engineering, Support Personel

CAKUPAN MATERI TRAINING :

  1. Pengertian Tentang Data Teknik Operasi Perminyakan dan Teknik Pengelolaannya
    • Data Geologi Produksi
    • Data Teknik Reservoir
    • Data Teknik Pemboran
    • Data Teknik Produksi
    • Data Analisis Keekonomian
  2. Reservoir Hidrokarbon
    • Kondisi Terbentuknya Reservoir
    • Tekanan dan Temperatur Reservoir
    • Fluida Reservoir
    • Batuan Reservoir
  3. Evaluasi Formasi Reservoir Hidrokarbon
    • Penentuan Formasi Permeabel
    • Penentuan Porositas Batuan
    • Penentuan Saturasi Fluida
    • Penentuan ketebalan Reservoir Rata-rata
    • Peralatan yang Terkait dengan Pelaksanaan Evaluasi Formasi
  4. Pemboran Sumur Minyak
    • Operasi
    • Biaya
    • Complesion
    • Fluida Pemboran
    • Data Akuisisi
    • Optimasi Pemboran
    • Problema Khusus Pemboran
    • Peralatan yang Terkait dengan Pelaksanaan Pemboran
  5. Perkiraan Cadangan
    • Volume In-place
    • Ketebalan Batuan
    • Peta Iso Porositas
    • Peta iso Kapasitas
    • Recovery Factor (Faktor Perolehan)
  6. Cara Produksi Reservoir Minyak Bumi
    • Inflow Performance Relationship
    • Primary Recovery Technology
    • Enhanced Oil Recovery Technology
    • Peralatan yang Terkait dengan Fasilitas Produksi di Bawah Permukaan
  7. Fasilitas Produksi di Permukaan
    • Field Processing Unit
    • Sistem Pemipaan Minyak Bumi
    • Peralatan yang Terkait dengan Fasilitas Produksi di Permukaan
  8. Analisa Kinerja Reservoir
    • Perolehan Reservoir Gas
    • Perolehan Primer Reservoir Minyak
    • Efisiensi Perolehan Minyak
    • Keseimbangan Materi
    • Peramalan Kinerja Produksi
  9. Prinsip-prinsip Dasar Analisis Keekonomian
    • Parameter Utama Analisis Keekonomian
    • Net Present Value
    • Internal Rate of Return
    • Pay Out Time
    • Profit to Invesment Ratio
    • Beberapa Contoh Kasus

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Petroleum Plant & Pipeline Security Management (BANDUNG)

Jadwal Training

Petroleum Plant & Pipeline Security Management (BANDUNG) Tanggal 21 Jul 2021-23 Jul 2021 18 Agust 2021-20 Agust 2021 30 Agust 2021-01 Sep 2021 20 Okt ... Baca Selengkapnya

Petroleum Plant & Pipeline Security Management (BANDUNG)

Jadwal Training

Petroleum Plant & Pipeline Security Management (BANDUNG)

Tanggal
21 Jul 2021-23 Jul 2021
18 Agust 2021-20 Agust 2021
30 Agust 2021-01 Sep 2021
20 Okt 2021-22 Okt 2021
15 Nop 2021-17 Nop 2021
13 Des 2021-15 Des 2021

Jam Pelaksanaan
08.30-16.30 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Dr. Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager, at PT. MMS, PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.

INVESTATION PRICE/ PERSON :  

  1. Rp 6.950.000/person (full fare)  or
  2. Rp 6.750.000/person (early bird, payment 1 week before training) or
  3. Rp 6.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified and experienced instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

TRAINING INTRODUCTION :
As energy transportation facility, pipelines are very vulnerable to intrusion, vandalism, sabotage and terrorist attack. The pipeline along ROW may be damaged with explosives or by other mechanical means causing flows to disrupt resulting in a release of pipeline flammable contents. On the other hand, computer control systems or SCADA could also be cyber-attacked by intruders leading to significant flow disruption. Since pipelines supply fuel for industry, transportation, power plants, manufactures, and other commercial uses, serious disruption of a pipeline network poses additional downstream risk.

Plant and pipeline security management is one of the most current and modern integrated management system to insure pipeline safety from third party threat and possibly damaging action in particular for onshore and cross-country pipeline system. It covers detail risk assessment and mitigation plan on both plants and pipeline system.
In this training course, “Security Vulnerability Assessment Methodology for the Petroleum and Petrochemical Industries” prepared by API and the National Petrochemical & Refiners Association (NPRA), and “Security Guidelines: Natural Gas Industry, Transmission and Distribution”, prepared by American Gas Association, USA will be used as major references. To enhance the training, as lesson learnt, various special cases study of pipeline and plants people affected accident around the world will be presented in details.

TRAINING MATERIAL OUTLINE :

  1. Understanding the psychology of destructive behavior
  2. Setting the context and boundaries and asset characterization
  3. Identifying the hazard and threat assessments (identify known or perceived adversaries)
  4. Criticality assessments (determine criticality)
  5. Vulnerability assessments (identify security weaknesses)
  6. Risk assessments (determine risks based on threat, vulnerability and consequence assessment findings)
  7. Strategy for sound risk mitigation (determine and implement appropriate risk reduction countermeasures)
  8. Monitor, reassess, and modify (security risk management is an ongoing effort)

TRAINING BENEFIT :
Knowledge and skill obtained from the training will be useful to set up the strategy to maintain pipeline safety and integrity from possible third party damaging activities. It introduces a new perspective on pipeline safety management that will provide invaluable benefit to pipeline owners, operators and other concerned parties.

WHO SHOULD ATTEND THIS TRAINING?
Plant and Pipeline Operators, Supervisors, Engineers and Managers

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Effluent Produced Waste Water (YOGYAKARTA)

Jadwal Training

Effluent Produced Waste Water (YOGYAKARTA) Tanggal 01 Nop 2021-04 Nop 2021 29 Nop 2021-02 Des 2021 Tempat Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta ... Baca Selengkapnya

Effluent Produced Waste Water (YOGYAKARTA)

Jadwal Training

Effluent Produced Waste Water (YOGYAKARTA)

Tanggal
01 Nop 2021-04 Nop 2021
29 Nop 2021-02 Des 2021

Tempat
Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

TRAINING DURATION :    4 days

INTRODUCTION:
Produced water is the largest single fluid stream in exploration and production operations. It consists of formation water, or flood water previously injected in to the formation. Generally, produced water may be injected with minimal treatment. If the injected water contains solids large enough to plug the formation, injectivity will decline. Downhole solids contributing to plugging may include not only the solids escaping filtration, but solids generated after water treatment (eg corrosion, scale, and bacterial products). Consequently, stringent corrosion inhibition, scale inhibition and bacterial control, as well as filtration, may be required for matrix rate injection. The course content and approach are designed to suit participants of different background and different position in the company. It will be delivered as a to-the-point explanation by a professional instructor, utilizing an easy-to-understand examples and illustrations, especially the actual cases in Indonesia.

WHAT WILL YOU LEARN FROM THIS TRAINING?:
By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more detail about many aspects of produced water handling and reinjection, know more how to treat the water and control corrosion, scaling, and bacterial action, understand how to select and use chemicals for treatment and operation of each equipment used for treatment, discuss and consult their specific problems they are about to bring to the class, and share experiences with others. After completion of this course, participants will understand what produced water is and its fantastic devastating potential to surface facility, well, and formation, how to predict and monitor its characteristics, why and how to perform treatment before reinjection, and how to control and prevent these big and serious problems caused by produced water in the oil & gas field. Participants will know what the minimum requirements for produced water before reinjection and what to do to achieve that requirements.

TRAINING MATERIAL OUTLINE:

  1. Understand produced water chemistry
  2. The suspended oil, dissolved oil and dissolved gases
  3. Bacteriological matter and added materials
  4. Suspended solid removal
  5. Suspended oil removal
  6. Chemical treating for control of bacteria
  7. Chemical treating for the control of scale
  8. Corrosion control techniques and the use of biocides
  9. Corrosion and bacterial problems
  10. Mineral scale formation
  11. Equipment and pipeline plugging
  12. Injection well and formation plugging
  13. The method and operation of produced water treatment for reinjection
  14. For either surface operation engineers or subsurface petroleum engineers, and anyone who involve in produced water handling, treatment, and related business activity.

INVESTMENT PRICE/PERSON :

  • Rp. 8.500.000/person (full fare) or
  • Rp. 8.250.000/person (early bird, payment 1 week before training) or
  • Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with Full AC facilities and multimedia
  • Lunch and twice coffeebreak every day of training
  • Qualified Instructor
  • Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. M. Syahri, MT, Ph.D  is alumnus from UPN “Veteran” Yogyakarta (UPNYK) and Institute of Technology (ITB) department of Chemical Engineering. Also alumnus from University Kebangsaan Malaysia (UKM) department Mechanical and Material Engineering. He has been as researcher at Oil and Gas; Renewable Energy Laboratory  UPNYK, he is also being as Senior Surface Facility Engineer in some project and Training Instructor. Some projects have been handled by him such as Senior Surface Facility Engineer, Plant of Development TAC Ramba-Pertamina Field, Sumbagsel (2008); Plant of Further Development East Pamanukan Field, Pertamina DOH Cirebon – Rainbow  Emerald (2007); Plant of Further Development Nglobo Field, Pertamina DOH JBT – Cepu (2005); Plant of Further Development Ketaling Barat Field, Pertamina DOH Sumbagteng – Jambi (2005); Also as Reviewer Team BP MIGAS, East Kalimantan Gas Deliverability  (Vico, Chevron, TOTAL) (2007). He also gave many courses to the companies, such as: Basic Ammonia Storage, Transfer Equipment and Major Hazards Impact; Dehydration  Process (Oil and Gas Operation); Clean Water Processing & Treatment for Industrial Application; Principle of Chemical Process Industry for non Engineer; Boiler Feed Water Treatment & Trouble shooting; Hazarous Materials Safe Handling; Basic Principle For steam Reformer, Shift Reaction, Operability Problem & trouble shooting; CO2 Removal Technology (Absorber, Striper) Trouble shooting and Operability impact; Catalitic Reactor in Ammonia Industry (Desulfurizer, Methanator, Steam Reformer, Ammonia Converter); Basic Fundamental Ammonia Synthesis, ARU And Process in Middle End Area; Inspection of Insulated Pipes Defects and Repairs Techniques; Emergency Handling in Ammonia Industry; etc.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Mekatronika (BANDUNG)

Jadwal Training

Mekatronika (BANDUNG) Tanggal 13 Jul 2021-16 Jul 2021 10 Agust 2021-13 Agust 2021 31 Agust 2021-03 Sep 2021 12 Okt 2021-15 Okt 2021 16 Nop ... Baca Selengkapnya

Mekatronika (BANDUNG)

Jadwal Training

Mekatronika (BANDUNG)

Tanggal

13 Jul 2021-16 Jul 2021
10 Agust 2021-13 Agust 2021
31 Agust 2021-03 Sep 2021
12 Okt 2021-15 Okt 2021
16 Nop 2021-19 Nop 2021
14 Des 2021-17 Des 2021

VENUE
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION
4 days

LATAR BELAKANG:
Tidak semua hal bisa dilakukan manusia dengan nilai yang efektif, efisien, dan aman. Oleh karena itu, penggunaan dan penguasaan bidang robotika adalah sebuah keniscayaan. Perkembangan industri (industri otomotif, industri farmasi, industri permesinan untuk proses otomasi, atau industri-industri yang menghendaki tenaga perawatan alat-alat produksinya atau bahkan industri jasa/servis peralatan mekanis/otomatis) menuntut tersedianya sumber daya manusia yang menguasai teknologi otomatisasi alias robot. Mobil ada mekanik, pesawat, kipas angin, AC, dsb., semua ada kemampuan otomatisnya. Teknologi tersebut merupakan pengembangan teknologi yang terintegrasi meliputi Medical Technology, CNC Technology dan Renewable Energy yaitu yang disebut dengan Teknik Mekatronika. Mekatronika, singkatan dari mekanik dan elektronika, suatu bidang khusus yang membahas mengenai otomasi, kini kian dibutuhkan. Namun dalam perkembangannya mempunyai cakupan yang lebih luas yaitu, suatu bidang yang mengintegrasikan teknik mesin, elektronika, perangkat keras dan perangkat lunak komputer, komunikasi, ilmu bahan, mikroelektronika, juga kecerdasan buatan. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Mekatronika.

SASARAN PESERTA:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang otomatisasi industri pada industri manufaktur dan industri minyak.

OUPUT TRAINING:
a.    Pemahaman tentang prinsip kerja dari beberapa aktuator mekanik dan elektrik (silinder pneumatik, silinder hidrolik, motor steper dan solenoid), prinsip pengontrolan secara mekanik, elektrik, dan programmable, pemrograman dan kontrol otomatis dengan menggunakan PLC.
b.    Keahlian dalam melakukan indiviual test, troubleshooting dan commissioning dari sistem kontrol otomatis.

CAKUPAN MATERI TRAINING:

  1. Struktur dari Sistem
    Pengertian mekatronika, struktur hardware dari sistem, kontrol desentral (4 PLC), sistem komunikasi (I/O-comm), penjelasan tentang fungsi dari modul, penjelasan tentang aliran material.
  2. Teat Individu dan Comissioning
    Pengertian komisioning, penyetelan reed switch dan sensor, penyetelan elemen mekanik, penyetelan aktuator pneumatik, deskripsi dari hubungan kabel, pelepasan hubungan kabel pada modul PLC, komisioning dari sistem.
  3. Pemograman
    • Dasar elektronika digital (Gerbang AND, OR, NOT, XOR, NOR, NAND dan R-S Flip-Flop)
    • Fungsi dari katup pneumatik
    • Pemrograman dengan bahasa function block diagram (FBD), statement list (STL), dan ladder diagram.
  4. Struktur PLC
    Struktur dari PLC, kegunaan CP-342-5 (WINCC-network), data teknis dari PLC S7 CPU 314 IFM, definisi hardware (with STEP 7)
  5. Struktur Program
    • Penjelasan tentang organization block (OB), dan function (FC)
    • Pemrograman OB dan FC, test program pada module,

INVESTMENT PRICE/PERSON :

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified 
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Aris Suryadi, MT  adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti  Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2026

Info Seminar | Jadwal Seminar