Jadwal Training 2024

Pengendalian Limbah B3

Jadwal Training

Pengendalian Limbah B3 Tanggal 10-11 Desember 2018 09-10 Januari 2019 Pukul 09.00-17.00 WIB Tempat Aryaduta Hotel Semanggi/Swiss-Belhotel, Jakarta Investasi Disertai dalam undangan training. Menurut Peraturan ... Baca Selengkapnya

Pengendalian Limbah B3

 

Pengendalian Limbah B3

Tanggal
10-11 Desember 2018
09-10 Januari 2019

Pukul
09.00-17.00 WIB

Tempat
Aryaduta Hotel Semanggi/Swiss-Belhotel, Jakarta

Investasi
Disertai dalam undangan training.

Menurut Peraturan Pemerintah No. 74 tahun 2001 dan No. 18 tahun 1999, Bahan Berbahaya dan Beracun (B3) dan limbah B3 adalah bahan/limbah yang karena sifat, konsentrasi atau jumlahnya berbahaya bagi tenaga kerja dan dapat membahayakan lingkungan. Upaya pengelolaan dan pengendalian B3 dan limbah B3 harus dilakukan untuk mencegah dan mengedalikan dampak lingkungan yang akan muncul sebagai konsekuensi atas penggunaan bahan ini.

Berbagai upaya dengan segala jenis metode yang diterapkan  dari setiap lembaga/industri mungkin sudah rutin dilakukan dan dikendalikan yang berhubungan dengan B3 ini, tetapi mungkin tetap saja memperoleh tantangan dari pihak-pihak yang berkepentingan. Tak jarang, aparat hukum dan media massa turut terlibat dengan isu B3 ini yang berakibat pada konflik in interest. Bagaimana mengatasi keadaan non-teknis ini menjadi peluang bagi pengusaha untuk meminimalkan budget pengelolaan yang sesuai dengan peraturan??

Pelatihan ini sedikit akan membahas B3, limbah B3 dan porsi terbesarnya adalah untuk mengetahui teknik pengendalian B3 ditinjau dari segi hokum. Dalam pelatihan ini juga akan diberikan panduan teknis supaya tenaga kerja di lapangan dapat melakukan penanganan B3 dengan aman, efisien dan berkenan dengan peraturan yang berlaku sehingga beban financial dapat dikontrol dengan lebih terperinci. Selama session pelatihan, peserta juga akan memperoleh contoh-contoh kasus untuk memperdalam pengetahuan dalam mengelolah B3 dan limbahnya.

Target peserta: Staff/Operator produksi, Environment Officer, K3/safety officer, Staff purchasing, petugas laboratorium dan profesional lainnya yang terlibat dalam pengelolaan administrasi dan teknis B3 dan limbah B3.

Sasaran :

  1. Memahami B3, limbah B3 dan jenis-jenisnya menurut perundang-undangan yang berlaku
  2. Memahami karakteristik B3 dan limbahnya dengan identifikasi bahaya
  3. Memahami dan mengetahui cara penerapan simbol dan label B3 dan limbah B3 menurut standard yang berlaku
  4. Mengetahui teknik pengelolaan dan pengendalian B3 dan limbah B3 dengan efektif dan berbiaya murah.
  5. Memahami MSDS dan bagaimana cara mereplikasikannya dengan cara yang lebih sederhana.
  6. Mengetahui jenis-jenis alat K3 yang berhubungan dengan pengelolaan B3 dan limbah B3.

Pokok Bahasan:

  1. Diskusi dan pemahaman singkat:
    • B3 dan limbah B3 menurut peraturan perundang-undangan
    • Peraturan lain yag terkait
    • Simbol dan label
  2. Karakteristik B3 dan limbah B3 dan bagaimana Identifikasi bahayanya.
  3. Teknik da metoda Pengendalian B3 dan limbah B3
    • Pengendalian teknis/operasional
    • Kisah sukses penerapan metode yang ramah serta tidak mencemari lingkungan
    • Pengendalian dokumen B3 dan limbah B3
    • Pemahaman dan cara Pemakaian Alat Pelindung Diri yang benar
  4. Lembar Material Safety Data Sheet (MSDS)
    • Memahami MSDS
    • Informasi apa saja yang patut dimengerti dan mengetahui cara penginformasiannya yang efektif.
    • Contoh-contoh
  5. Penanganan Limbah B3
    • Persyaratan teknis dan administrasi pengelolaan limbah B3
    • Penanganan limbah B3 menurut konsep “from cradle to grave”
    • Informasi usaha terkait Pengelolaan Limbah Industri di Indonesia

Metode Pelatihan
Pelatihan ini akan dilakukan dengan metode interaktif yang menyerupai semi-workshop dimana peserta akan langsung diajak mendiskusikan setiap topic yang disajikan, diberi contoh aplikasi terkini dan telah teruji, serta sharing informasi tentang hal-hal yang bersifat praktis dan administrasi dalkam usaha pengelolaan B3 dan limbah B3.

Facilitator :

Encep Heryani, M.Si

Encep Heryani adalah lulusan dari Universitas Pakuan Bogor Jurusan biologi dan AKTA IV Jakarta dan menyandang gelar terakhir Magister Sains (M.Si). Berangkat karir dari bawah mulai tahun 1986 sebagai analis mikrobilogi selama 17 tahun di perusahaan baby milk formula yang ada di Citeureup Bogor, kemudian bekerja di perusahaan susu infant formula lisensi Jepang menjabat Supervisor Quality Assurance selama 3 tahun dan lanjut memimpin Quality selama 8 tahun dan terakhir Memimpin Produksi di perusahaan makanan kesehatan untuk orang diabet sampai tahun 2018.

Di Perusahaanya menjadi karyawan teladan dan fasilitator terbaik continuos improvement, meraih prestasi terbaik dalam kontes practical problem solving, the best trainer and author education and training. Dan sebagai anggota PERMI (Perhimpunan Mikrobiologi Indonesia)

Encep Heryani, dari tahun 1986 sampai dengan sekarang adalah sebagai praktisi di perusahaan, hampir 100 training pernah diikuti baik training dalam negeri maupun di luar negeri (Singapura dan Japan), sebagai Auditor TPM Autonomous Maintenance juga Auditor 5S/5R, SJH, GM5P, ISO 9001 dan 22000, SMK3 dll. Sebagai Trainer dari tahun 2015 dengan materi Trainer  kurang lebih 41 judul yang berkaitan dengan Pengendalian dan pengawasan Mutu Pangan, Analisis data Lab, Pengendalian dan persyaratan dokumen, Penanganan limbah, Validasi, Safety/K3 laboratorium, TPM, Halal, analisis mikrobiologi, kaizen, dll.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Authorised Gas Testing (BANDUNG)

 

Authorised Gas Testing (BANDUNG)

TRAINING TIME :
19 Nov 2018-22 Nov 2018
03 Dec 2018-06 Dec 2018

VENUE
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION
4 days

OVERVIEW:
Gas tersting onvolves testing for oxygen, toxic and flammable gases using portable gas detection equipment and is an integral part of establishing safe system of work. The authorised gas testing (AGT) e-learning course covers: gas testing procedure and practices, the procedural requirements for gas testing, the teory of combustion, characteristics of gas mixtures and the use of portable gas testing equipment. The course provides the underpinning knowledge to support competence and when combined with the supplementary practical and workplace assessment, can provide a complete methode to achieve AGT certification.

WHO SHOULD ATTEND THIS TRAINING?:
The course is aimed at personnel who will be involved in gas testing activities, authorised gas testers or those requiring knowledge of gas testing practices.

FEATURES:

  1. Provides underpinning knowledge for the AGT1 unit of competence
  2. Proven generic course used by many leading oil and gas companies
  3. Case studies based on real life incidents
  4. Continous assessment throughout course
  5. Automatic remediation of incorrectly answered questions
  6. Interactive worked examples based on workplace scenarios
  7. High quality illustration-based animations
  8. Can be tailored to reflect a specific company’s procedures and methods
  9. Integrated trainee results management system

TRAINING MATERIAL OUTLINE:

  1. introduction to gas testing
    • Aims
    • Introduction
    • What is gas testing
    • Why is gas testing carried out
    • Case study
    • Who carries out gas testing
    • When is gas testing carried out
    • Terminology
    • Abbreviations
    • summary
  2. flammable gases
    • aims
    • the chemistry of fire
    • lower explosive limit
    • upper explosive limit
    • explosive range
    • common gases
    • explosions
    • explosions summary
    • summary
  3. toxic gases
    • aims
    • toxic gases & vapours
    • workplace exposure limit (WEL)
    • toxic gases
    • other toxic gases
    • detecting toxic gases
    • hydrogen sulphide (H2S)
    • characteristics of H2S
    • odour
    • concentration of H2S
    • effects of H2S on equipment
    • asphyxiants
    • long term health impacts
    • personal protective equipment – regulatory requirements
    • selecting PPE – controlling risks from hazardous gases
    • selecting PPE – fitting and ergonomic factors
    • use and maintenance of personal protective equipment
  4. properties  of gases
    • aims
    • gas clouds movement
    • gas behaviour
    • physical prperties
    • relative density
    • velocity
    • temperature
    • pressure
    • dispersion
    • enclosed areas
    • outdoor areas and open structures
    • summary
  5. portable gas detection equipment
    • aims
    • portable and personal gas detectors
    • types of portable and personal gas detectors
    • gas detector principles of operation
    • catalytic detectors – disadvantages
    • gas detectors principles of operation
    • infrared (IR) detectors – principles of operation
    • infrared (IR) detectors – advantages and disadvantages
    • inert atmospheres
    • portable gas detectors – sampling
    • when to use an aspirated detector
    • portable gas detectors – basic checks
    • portable gas detectors – general considerations
    • portable gas detectors – temperature effects
    • limitations of portable gas detectors
    • erratic indications
    • environments that affect readings
    • off-scale readings
    • aspirated detector tubes
    • aspirated detector tubes – operation
    • warning systems
    • flammable gas alarm limits
    • toxic gas alarm limits
    • oxygen  gas alarm limits
    • personal gas detector
    • fixed gas detectors
    • fixed gas detectors – positioning
    • summary
  6. gas testing procedures
    • aims
    • process plant
    • hazardous areas
    • zone 0
    • zone 1
    • zone 2
    • gas testing in support of work activities
    • the permit to work system – initial gas tests
    • the permit to work system – repeat gas tests
    • permit to work – continous gas monitoring
    • permit to work – validity of gas tests
    • practical gas testing
    • practical gas testing – evaluation
    • practical gas testing – considerations
    • practical gas testing – air movement
    • practical gas testing – HVAC flow paths
    • practical gas testing – dealing with a suspected leak
    • case study
    • limitations of protective systems
    • summary

INVESTATION PRICE/PERSON :  

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Bambang Pamudji, B.Sc.,SE. has much real experiences, he is former Senior Health and Safety staff at PT. Pupuk Sriwidjaja,PUSRI(Urea Fertilizer Manufacturer) Palembang. He was born in Pasuruan East Java, 14 March 1950. He got his B.Sc in Public Health from APK Surabaya in 1971 and was graduated from Economic Management Sriwidjaja University, UNSRI, Palembang in 1996. He has certificates in Health, Safety, and Environment (HSE) from Depnakertrans RI/Institutions and Universities in Indonesia, institutions and Universities in UK, and National Safety Council. Experienced in setting up Health and Safety Management System documentation and its application. Experienced internal lead auditor SMK3 in PT. Pupuk Sriwidjaja, and External lead auditor SMK3 for Indonesian Association Fertilizer Producer. He has been teaching industrial training classes for many classes related to topics of his competencies, HSE. Many participants from many companies in Indonesia have participated in his training classes

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Onshore Drilling Safety Operations / HSE Aspects in Onshore Drilling Operations For Managers And Superintedents (BANDUNG)

 

Onshore Drilling Safety Operations / HSE Aspects in Onshore Drilling Operations For Managers And Superintedents (BANDUNG)

Tanggal

  • 05 Sep 2018-07 Sep 2018
  • 29 Oct 2018-31 Oct 2018
  • 07 Nov 2018-09 Nov 2018
  • 26 Dec 2018-28 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING MATERIAL OUTLINE :

  1. Principles of Modern HSE Management in Onshore Drilling Operations
  2. Introduction to RI Government Safety Laws and Regulations :
    • Undang-Undang No. 1 tentang Keselamatan Kerja
    • MIGAS Mining Police Ordinance/Mijn Politie Reglement Gazette 1930 No. 341
    • Peraturan Menteri Pertambangan dan Energi No. 02.P/20/M.PE/1990 tentang Keselamatan Kerja Pada Eksplorasi dan Eksploitasi Sumber Daya Panas Bumi
  3. Indonesia National Standard (SNI 13-6910-2002) about Implementation of Onshore Drilling for Safe Conduct in in Indonesia
  4. Roles and Responsibilities of Managers/Superintendents in Onshore Drilling HSE Operations :
    • Management Commitment and HSE Policy
    • Planning
    • Implementation and Operation
    • Checking and Corrective Action
    • Management Review
  5. General HSE Promotions in Onshore Drilling Operations
  6. Case Study (Review of Real Accidents in Onshore Drilling Operations, and will be connected to Managers/Superintendents’s Functions, Roles and Responsibilities)
  7. Safety Films/VCD Display, Group Assignments, Presentations and Discussions
  8. Pre-Test and Post-Test ; Course Evaluation

TRAINING DURATION : 3 days

INVESTATION PRICE/PERSON :  

  • Rp 6.500.000/person (full fare)  or
  • Rp 6.250.000/person (early bird, payment 1 week before training) or
  • Rp 5.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Didi Sugandi,Bc.M was born in Bandung August 21, 1950. He studied at Akademi Minyak dan Gas Bumi (AKAMIGAS) / Oil & Natural Gas Academy, Cepu, Central Java (1973-1977), graduated as Bachelor of Petroleum Engineering (Bakaloreat Minyak or Bc. M), under sponsorship or study assignment of PT Stanvac Indonesia and he also studied at University of Pembangunan Nasional (UPN) Veteran, Yogyakarta (1986-1991), graduated as Petroleum Engineer (Ir.), under sponsorship or study assignment of Huffco/VICO Indonesia. His work experiences is 39 years in oil and gas companies and 1 year in geothermal, detailly as follows:

  1. 1970 – 1981 : PT Stanvac Indonesia Pendopo, South Sumatera (Production Dept., Study Assignment at AKAMIGAS Cepu, Safety & Equipment Inspection Dept.)
  2. 1981 – 1997 : Huffco / VICO Indonesia, East Kalimantan (Production Dept., Manpower Planning & Development, Study Assignment at UPN Veteran Yogyakarta, Production Dept., Loss Prevention & Environment Dept./LPED, HSE System Dept.)
  3. 1997 – 1998 : Karaha Bodas Company (KBC-Geothermal Drilling Project, Garut, West Java, HSE Dept.) & Sumitomo Corporation (Geothermal Power Plant Construction Project, Pangalengan, West Java, HSE Dept.)
  4. 1999 – 2002 : JOB Pertamina-Gulf Resources, Jambi, Sumatera, HSE Dept. (under contract services of SUCOFINDO Main Office Jakarta & PT Guna Persada Engineering)
  5. 2003 – now : Caltex/Chevron Pacific Indonesia (CPI), Riau, Sumatera, HES Management System Audit Project in Drilling & Wellwork Operations (under contract services of PT Surveyor Indonesia – Pekanbaru)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Managing Contractor Safety (BANDUNG)

 

Managing Contractor Safety (BANDUNG)

Tanggal

  • 27 Aug 2018-29 Aug 2018
  • 24 Sep 2018-26 Sep 2018
  • 31 Oct 2018-02 Nov 2018
  • 26 Nov 2018-28 Nov 2018
  • 26 Dec 2018-28 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
Based on “KOMPAS” Newspaper (Thursday, December 5, 2002), an average of 8 workers are killed on the job each working day in Indonesia. Also many of the world’s major accidents over the past 10 years involved contractors costing proprietors in excess of US$ 20,000,000,000.

TRAINING OBJECTIVES :
To prepare organizations in reducing their costs through professional and prudent management skills, approach and control techniques, including the management and control of contractor or business partner personnels. This significant and valuable course stresses learning and applying professional management skills to managing contractor safety function including occupational health and environmental aspects in your organization.

TRAINING MATERIAL OUTLINE :

  1. The need for managing safety or HSE in contractual relationships
  2. Fundamental concepts of loss control management
  3. Job planning and bid invitation preparations
  4. The contractor selection process
  5. Contractor performance measurement and monitoring
  6. Contract close-out and turnover
  7. Contractor HSE Management System
  8. Case Study / Exercises, Group discussions and presentations
  9. Pre-Test, Post-Test and Course evaluation.

WHO SHOULD ATTEND ?
Course participants are Safety/HSE/SHE/EHS/Loss Control/Loss Prevention Professionals, Contract Administrators or Legal Professionals, Procurement Professionals, or anyone who has to manage and work with contractors or business partners.

TRAINING DURATION :   3 days

INVESTATION PRICE/PERSON :  

  1. Rp 6.500.000/person (full fare)  or
  2. Rp 6.250.000/person (early bird, payment 1 week before training) or
  3. Rp 5.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Didi Sugandi,Bc.M was born in Bandung August 21, 1950. He studied at Akademi Minyak dan Gas Bumi (AKAMIGAS) / Oil & Natural Gas Academy, Cepu, Central Java (1973-1977), graduated as Bachelor of Petroleum Engineering (Bakaloreat Minyak or Bc. M), under sponsorship or study assignment of PT Stanvac Indonesia and he also studied at University of Pembangunan Nasional (UPN) Veteran, Yogyakarta (1986-1991), graduated as Petroleum Engineer (Ir.), under sponsorship or study assignment of Huffco/VICO Indonesia. His work experiences is 39 years in oil and gas companies and 1 year in geothermal, detailly as follows:

  1. 1970 – 1981 : PT Stanvac Indonesia Pendopo, South Sumatera (Production Dept., Study Assignment at AKAMIGAS Cepu, Safety & Equipment Inspection Dept.)
  2. 1981 – 1997 : Huffco / VICO Indonesia, East Kalimantan (Production Dept., Manpower Planning & Development, Study Assignment at UPN Veteran Yogyakarta, Production Dept., Loss Prevention & Environment Dept./LPED, HSE System Dept.)
  3. 1997 – 1998 : Karaha Bodas Company (KBC-Geothermal Drilling Project, Garut, West Java, HSE Dept.) & Sumitomo Corporation (Geothermal Power Plant Construction Project, Pangalengan, West Java, HSE Dept.)
  4. 1999 – 2002 : JOB Pertamina-Gulf Resources, Jambi, Sumatera, HSE Dept. (under contract services of SUCOFINDO Main Office Jakarta & PT Guna Persada Engineering)
  5. 2003 – now  : Caltex/Chevron Pacific Indonesia (CPI), Riau, Sumatera, HES Management System Audit Project in Drilling & Wellwork Operations (under contract services of PT Surveyor Indonesia – Pekanbaru)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

HSE For Oil And Gas (JAKARTA + LUAR KOTA)

 

HSE For Oil And Gas (JAKARTA + LUAR KOTA)

DESKRIPSI PELATIHAN
Perusahaan oil and gas dalam menjalankan operasinya tentunya memiliki resiko yang tinggi, sehingga perusahaan terkait tentunya harus memperhatikan secara detail aspek kesehatan dan keselematan para staffnya, terutama bagi para staff bagian produksi. Kecelakaan kerja yang terjadi tidak hanya merugikan staff yang bersangkutan namun juga mendatangkan dampak kerugian bagi perusahaan terkait, baik dalam bidang keuangan maupun kinerja. Reputasi perusahaan juga akan mendapatkan pengaruh buruk dari kejadian kecelakaan tersebut. Kepercayaan masyarakat dan pemerintah terhadap perusahaan terkait tentunya akan menurun dan mempersulit pelaksanaan / operasional izin penambangan.

Oleh sebab itu, perusahaan memerlukan sistem manajemen terpadu guna meningkatkan efektivitas perlindungan keselamatan dan kesehatan staff / pekerja secara terencana dan terevaluasi. Optimalisasi fungsi health, safety & environment (HSE) pada perusahaan akan memberikan rasa nyaman, aman dan efisien kepada para pekerja yang dapat menguntungkan perusahaan karena peningkatakan produktivitas pekerjanya.

Setelah mengikuti training ini diharapkan peserta mampu untuk :

  1. Memahami pengelolaan dan efisiensi sistem manajemen HSE perusahaan oil and gas
  2. Meningkatkan kemampuan pemecahan masalah dan perencanaan dalam bidang HSE Oil Gas

MATERI / OUTLINE PELATIHAN
1. Sistem Manajemen HSE
a. Ruang Lingkup / Konsep
b. Peran
c. Manfaat
2. Tahapan dan Strategi dalam Identifikasi potensi bahaya dan resiko Perusahaan Oil and Gas
3. Standar penerapan sistem manajemen HSE (Regulasi pemerintah, OHSAS 18001)
4. Perencanaan dan sosialisasi program HSE kepada Pekerja / Staff
5. Sistem kendali mutu HSE secara efisien & efektif
6. Pelaporan
7. Investigasi
8. Tahapan membangun emergency respon system dalam mitigasi HSE
9. Studi kasus dan diskusi

JADWAL DAN INVESTASI PELATIHAN

  • Yogyakarta / Cavinton Hotel | Rp5.250.000/peserta | Rp6.300.000/peserta
  • Semarang / Ibis Simpang Lima Hotel | Rp5.900.000/peserta
  • Malang / Ibis Malang Hotel | Rp5.900.000/peserta
  • Solo / Ibis Solo Hotel | Rp5.900.000/peserta
  • Jakarta / Ibis Kemayoran Hotel | Rp7.000.000/peserta
  • Surabaya / Santika Hotel  | Rp7.000.000/peserta
  • Bandung / Serella Hotel | Rp7.000.000/peserta
  • Bali / Santika Hotel | Rp8.100.000/peserta
  • Batam / Nagoya Plaza Hotel | Rp8.100.000/peserta
  • Balikpapan / Ibis Hoel | Rp8.100.000/peserta

(non residential)
Agustus 29-31
September 5-7 | 12-14 | 19-21 | 26-28
Oktober 3-5 | 10-12 | 17-19 | 24-26 | 28-30
November 7-9 | 14-16 | 21-23 | 28-30
Desember 5-7 | 12-14 | 19-21 | 26-28

FASILITAS PELATIHAN

  1. Sertifikat Pelatihan (Certificate)
  2. Expert Instructure
  3. Meeting Room Hotel dengan Lunch dan 2 kali Coffe Break
  4. Exclusive Training kits dan Backpacks
  5. Modul Pelatihan Hard dan Softcopy
  6. USB Flashdisk
  7. Foto Group Soft & Hard Copy
  8. Souvenir
  9. Transportasi selama Pelatihan (bandara dan Penginapan Ke Lokasi Pelatihan).

METODE PELATIHAN
•    Presentasi
•    Diskusi  dan Tanya Jawab
•    Studi kasus
•    Brainstorming
•    Praktek

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Modern Safety And Loss Control Management (BANDUNG)

 

Modern Safety And Loss Control Management (BANDUNG)

Tanggal

  • 03 Sep 2018-06 Sep 2018
  • 02 Oct 2018-05 Oct 2018
  • 05 Nov 2018-08 Nov 2018
  • 03 Dec 2018-06 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
Some managers do not understand how much accidents and other loss-producing events really cost. Wearing the blinders of traditional thinking in the area of accidents, they are likely to see only the costs of medical treatment and workers compensation. What is worse, they may accept these as the envitable costs of “doing business”, or assume that accident costs are borne by the insurance carrier. Even fewer managers understand that the same factors which are creating understand are also creating production losses as well as quality and cost problems. To understand the modern safety and loss control management is to take the significant steps in the identification, assessment and control of all losses.

TRAINING OBJECTIVES :
After attending this course, the course participants will be able to :

  1. Understand the Republic Indonesia / Government & International Safety Regulations
  2. Implement modern safety and loss control management principles .
  3. Analyze the real causes , cost of accidents and other losses, and a functional framework for analyzing their sources and controlling their effects.
  4. Conduct professional management approach to provide operational strategies for improving overall management.

TRAINING MATERIAL OUTLINE :

  1. Introduction to R.I. Government and International Safety Regulations.
  2. The Modern Evolution of Safety Management
  3. The Causes and Effects of Loss
  4. Management Control of Loss
  5. Planned Inspections
  6. Personal and Group Communications
  7. Leadership and Employee Training
  8. Principles of Occupational Health
  9. Fire Loss Prevention and Control
  10. Principles of Accident/Incident Investigation
  11. Property Damage and Waste Control
  12. Case Study, Group Discussions and Presentations, Safety Film/VCD Shows
  13. Pre-Test, Post-Test and Course Evaluation

WHO SHOULD ATTEND ?
Managers, Superintendents and Supervisors of all Departments, such as Production, Maintenance, Logistics, Engineering, Safety/HSE/SHE/EHS/Loss Control/Loss Prevention, Medical, Utilities and Services, Security, Personnel/Human Resources and who ever concern with the Safety and Loss Control aspects.

TRAINING DURATION : 4 days

INVESTATION PRICE/PERSON :

  1. Rp 7.750.000/person (full fare)  or
  2. Rp 7.500.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Didi Sugandi,Bc.M was born in Bandung August 21, 1950. He studied at Akademi Minyak dan Gas Bumi (AKAMIGAS) / Oil & Natural Gas Academy, Cepu, Central Java (1973-1977), graduated as Bachelor of Petroleum Engineering (Bakaloreat Minyak or Bc. M), under sponsorship or study assignment of PT Stanvac Indonesia and he also studied at University of Pembangunan Nasional (UPN) Veteran, Yogyakarta (1986-1991), graduated as Petroleum Engineer (Ir.), under sponsorship or study assignment of Huffco/VICO Indonesia. His work experiences is 39 years in oil and gas companies and 1 year in geothermal, detailly as follows:

  1. 1970 – 1981 : PT Stanvac Indonesia Pendopo, South Sumatera (Production Dept., Study Assignment at AKAMIGAS Cepu, Safety & Equipment Inspection Dept.)
  2. 1981 – 1997 : Huffco / VICO Indonesia, East Kalimantan (Production Dept., Manpower Planning & Development, Study Assignment at UPN Veteran Yogyakarta, Production Dept., Loss Prevention & Environment Dept./LPED, HSE System Dept.)
  3. 1997 – 1998 : Karaha Bodas Company (KBC-Geothermal Drilling Project, Garut, West Java, HSE Dept.) & Sumitomo Corporation (Geothermal Power Plant Construction Project, Pangalengan, West Java, HSE Dept.)
  4. 1999 – 2002 : JOB Pertamina-Gulf Resources, Jambi, Sumatera, HSE Dept. (under contract services of SUCOFINDO Main Office Jakarta & PT Guna Persada Engineering)
  5. 2003 – now : Caltex/Chevron Pacific Indonesia (CPI), Riau, Sumatera, HES Management System Audit Project in Drilling & Wellwork Operations (under contract services of PT Surveyor Indonesia – Pekanbaru)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

HSE Work Practices At Confined Space (BANDUNG)

 

HSE Work Practices At Confined Space (BANDUNG)

(Bekerja Yang Sehat, Selamat dan Peduli Lingkungan pada Ruangan Terbatas/Tertutup)

INTRODUCTION :
Ada beberapa kecelakaan fatal (orang meninggal dunia) yang pernah terjadi dilapangan eksplorasi dan produksi (EP) minyak dan gas bumi di Indonesia dimana “sang korban” lagi memasuki dan/atau bekerja diruang tertutup/terbatas (Confined Space), antara lain :

  1. Di terminal/jetty (Kaltim, sekitar tahun 1980an), siang hari, setelah barge berisi solar dipompakan ketanki solar didarat, seorang teknisi masuk kedalam barge untuk memeriksa kondisi bagian dalam dinding barge (compartment), rekan-rekannya yang diluar barge heran karena teknisi tadi sudah +/-2 jam tidak muncul dari dalam barge. Kemudian petugas Safety memakai APD lengkap masuk kedalam barge/kompartemen, ternyata teknisi ditemukan sudah meninggal.
  2. Di Stasiun Pengumpul Pusat/SPP (Kaltim, sekitar tahun 1985an), tengah malam, seorang operator produksi naik keatas atap tanki produksi untuk mengukur/memastikan tinggi minyak dalam tanki jenis terapung (floating roof tank) kapasitas 10.000 barrel. Beberapa saat kemudian, rekannya dari ruang operator memanggilnya berulangkali via radio/handy talky tapi tidak ada menjawab. Kemudian 2 petugas Safety dengan APD lengkap menyusul naik ke atap tanki, ternyata operator tersebut ditemukan sudah meninggal diatas atap tanki terapung.
  3. Disumur minyak yang sedang ditest atau Well Testing (Kaltim, kwartal kedua tahun 2011), operator (“A”) bermaksud mengukur tinggi cairan dalam tanki dengan mengunakan tongkat atau stick, kemudian stick nya terjatuh masuk kedalam tanki, “A” masuk kedalam tanki untuk mengambil stick tadi, dan tidak bisa keluar, datang “B” masuk tanki untuk menolong “A”, juga tidak keluar, datang lagi “C” masuk untuk menolong, juga tidak bisa keluar dari tanki, datang lagi “D”. Ternyata 3 orang meninggal dunia (“A”, “B” dan “C”), sedangkan “D” pingsan dan masih bisa tertolong dirumahsakit.

Dari kejadian-kejadian fatal diatas membuktikan bahwa memasuki dan/atau bekerja dalam confined space adalah merupakan kegiatan yang mengandung bahaya dan risiko tinggi yang akan berakibat fatal bagi siapapun. Untuk itu diperlukan pengetahuan, training, pengalaman, latihan/praktek/simulasi bagaimana cara bekerja dalam confined space agar setiap petugas/orang tetap sehat, selamat dan tidak mencemari/merusak lingkungan disekitar confined space.

TRAINING OBJECTIVES :

Selama dan setelah mengikuti pelatihan ini, maka para peserta dapat :

  1. Mengetahui, memahami dan melaksanakan prinsip-prinsip dasar manajemen pengendalian rugi sehingga akibat dari suatu kerugian (seperti kecelakaan, kebakaran, pencemaran lingkungan, dll) bisa diminimalisir.
  2. Mengetahui, memahami dan melaksanakan Job Safety Analysis (JSA) dan Confined Space Entry & Work Permit untuk pekerjaan-pekerjaan yang terkait dengan Confined Space.
  3. Mengetahui,memahami dan melaksanakan “13 Minutes HIRARC” (Hazard Identification, Risk Assessment & Risk Control) untuk pekerjaan-pekerjaan yang terkait dengan Confined Space.
  4. Mengetahui, memahami dan mampu menggunakan alat-alat/peralatan/instrument yang dipakai dalam pekerjaan di Confined Space, antara lain seperti : Explosive Meter/Multi Gas Detector, SCBA, H2S Personal Monitor, APAR, Blower, dll.
  5. Mengetahui, memahami dan mampu memasuki dan/atau bekerja dalam Confined Space dengan cara dan peralatan yang benar dan sesuai, sehingga dirinya maupun orang lain, tetap sehat dan selamat serta tidak tejadi gangguan atau pencemaran terhadap lingkungan.

TRAINING MATERIAL OUTLINE :

  1. Prinsip-Prinsip Dasar Manajemen Pengendalian Rugi :
  • Sejarah/Kronologis istilah HSE, Loss Prevention, Loss Control.
  • Definisi : accident, incident, near miss, safety.
  • Accident Ratio Study ; Teori Gunung Es (Ice Berg).
  • Loss Causation Model ; Pre-Contact Control, Contact Control, Post-Contact Control.
  1. Ruang Tertutup/Terbatas atau Confined Space (Pengertian/Definisi; Jenis-Jenisnya ; Dll.).
  2. Pencegahan dan Penanggulangan Kebakaran Pada Confined Space :
  • Teori segitiga api ; Jenis-jenis/kelas kebakaran
  • Teknik pencegahan kebakaran, Media dan alat pemadam kebakaran, Teknik penanggulangan kebakaran
  1. Izin Memasuki dan Bekerja Dalam Confined Space (Confined Space Entry and Work Permit) :

Catatan : akan membahas formulir permit ini yang dipunyai oeh Tuan Rumah/User seperti terminologi-terminologinya, cara-cara pengisian formulir, dokumen-dokumen pendukung yang harus dilampirkan (seperti Work Order, Program kerja, JSA, dll), pihak-pihak yang terkait dalam proses work permit, dan lain sebagainya).

  1. Analisa Keselamatan Bekerja atau Job Safety Analysis (JSA) untuk pekerjaan didalam Confined Space. CATATAN : setelah diberi teori tentang JSA, maka peserta training akan dibagi dalam 4 atau 5 kelompok @ 4-5 orang/kelompok untuk membuat JSA untuk 4-5 jenis pekerjaan yang berbeda antara satu job dengan job lainnya :
  • Membersihkan/mengosongkan sludge dari dalam/dasar Tanki Produksi di SPP.
  • Memperbaiki/mengelas plat dasar tanki minyak yang rusak/bocor di SP.
  • Membersihkan bagian dalam tanki lumpur (Mud Tank) dilokasi Rig Pemboran.
  • Memperbaiki/mengelas dinding bagian dalam dari Separator 3 Fasa (3 Phase) di SP.
  • Memperbaiki/mengelas plat dasar tanki solar (Diesel Fuel Tank) di Terminal BBM.

Atau Tuan Rumah/User dipersilahkan juga untuk memberikan tugas-tugas Confined Space lainnya. Kemudian JSA ini dipresentasikan oleh masing-masing kelompok dan didiskusikan bersama.

  1. “13 Minutes HIRARC” (Hazard Identification, Risk Assessment & Risk Control) :
  • Identifikasi Bahaya-Bahaya yang potensial pada pekerjaan-pekerjaan dalam Confined Space.
  • Penilaian Risiko dari bahaya-bahaya potensial tersebut terhadap HSE, apakah termasuk Risiko Rendah (Low Risk), Risiko Menengah (Medium Risk) atau Risiko Tinggi (High Risk).
  • Pengendalian Risiko, bagaimana mengendalikan atau mengontrol risiko-risiko tersebut agar tidak terjadi kerugian-kerugian seperti penyakit akibat kerja, kecelakaan kerja, kebakaran, pencemaran lingkungan, dan lain sebagainya.

CATATAN : para peserta training akan dibagi dalam kelompok seperti pada butir 5 diatas dan diberi tugas membuat “13 Minutes HIRARC” untuk 5 jenis pekerjaan Confined Space seperti pada butir 5.1. sampai dengan 5.5.) kemudian dipresentasikan oleh masing-masing kelompok dan didiskusikan bersama.

  1. Peralatan-Peralatan dan Alat Pelindung Diri (APD) untuk memasuki dan bekerja dalam Confined Space, bagaimana cara bekerjanya dan bagaimana cara menggunakannya, antara lain : Explosive Meter/Multi Gas Detector, Self Contained Breathing Apparatus (SCBA), Respiratory Protection Equipment, Personal H2S Monitor, Safety/Gas Explosion Proof Flashlight, Safety Belt, Full Body Harness, Bug Blower, APAR Dry Powder/Dry Chemical Kelas ABC ukuran 20 Lbs atau 10 Kg, Wheeled Fire Extinguisher Dry Powder/Dry Chemical Kelas ABC ukuran 150 Lbs, dan lain sebagainya.
  2. Pemutaran film/video yang terkait dengan Confined Space termasuk beberapa Case Study.
  3. Praktek atau latihan/simulasi “Memasuki dan Bekerja Dalam Confined Space” (pada hari ketiga training atau dari jam 8 sd 11.30 pagi, jam 12 – 13.00 istirahat, jam 13 sd 16.00 kembali kekelas, bila tidak memungkinkan kembali kekelas, maka bisa tetap dilapangan untuk mengevaluasi praktek tsb). Tuan Rumah/User menyediakan fasilitas dan peralatan-peralatan, antara lain sebagai berikut :
  • Satu tanki kosong (bentuk silinder atau segiempat) atau Separator/FWKO yang IDLE (TIDAK DIPAKAI, kapasitas terserah asal 1 – 3 orang bisa masuk dalam keadaan berdiri tegak. Lokasinya DIUSAHAKAN JANGAN YANG DI SP (Stasiun Pengumpul) ATAU SPP (Stasiun Pengumpul Pusat), MUNGKIN YANG ADA DI JUNK YARD.
  • Peralatan-peralatan dan APD seperti pada butir 7 ditambah tali tambang (manila rope) ukuran diameter 1 inchi & panjang 10 meter serta Kotak P3K.

CATATAN : dalam latihan ini Fasilitator Training akan dibantu seorang Asisten. Diskusi2 dan Tanya jawab akan dilakukan pada saat latihan praktek ini. Siang harinya semua kembali kedalam kelas untuk diskusi lebih lanjut dan evaluasi pelatihan, Post-Test, dll.

  1. Pre-Course Assessment (Pre-Test) dan Post-Course Assessment (Post-Test), Evaluasi Pelatihan.

WHO SHOULD ATTEND? :
Para Team Leader (Foreman, Supervisor) termasuk Pekarya/Mitra Kerja dari berbagai Bagian/Departemen (Drilling, Perawatan Sumur atau WO/WS, Produksi, Pemeliharaan/Maintenance, Construction/Fabrication/Welding, HSE/K3LL, Materials/Logistics, dll) yang terkait dengan pekerjaan pada Confined Space.

INSTRUCTOR :Ir. Didi Sugandi, Bc. M and Team

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION :   3 days

TRAINING TIME :

  • 12 Sep 2018-14 Sep 2018
  • 17 Oct 2018-19 Oct 2018
  • 14 Nov 2018-16 Nov 2018
  • 12 Dec 2018-14 Dec 2018

INVESTMENT PRICE/PERSON:

  • Rp 6.500.000/person (full fare) or
  • Rp 6.250.000/person (early bird, payment 1 week before training) or
  • Rp 5.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Didi Sugandi,Bc.M was born inBandung August 21, 1950. He studied at Akademi Minyak dan Gas Bumi (AKAMIGAS)/ Oil & Natural Gas Academy, Cepu, Central Java (1973-1977), graduated as Bachelor of Petroleum Engineering (Bakaloreat Minyak or Bc. M), under sponsorship or study assignment of PT Stanvac Indonesia and he also studied at University of Pembangunan Nasional (UPN) Veteran, Yogyakarta (1986-1991), graduated as Petroleum Engineer (Ir.), under sponsorship or study assignment of Huffco/VICO Indonesia. His work experiences is 39 years in oil and gas companies and 1 year in geothermal, detailly as follows:

  1. 1970 – 1981 : PT Stanvac Indonesia Pendopo, South Sumatera (Production Dept., Study Assignment at AKAMIGAS Cepu, Safety & Equipment Inspection Dept.)
  2. 1981 – 1997 : Huffco / VICO Indonesia, East Kalimantan (Production Dept., Manpower Planning & Development, Study Assignment at UPN Veteran Yogyakarta, Production Dept., Loss Prevention & Environment Dept./LPED, HSE System Dept.)
  3. 1997 – 1998 : Karaha Bodas Company (KBC-Geothermal Drilling Project, Garut, West Java, HSE Dept.) & Sumitomo Corporation (Geothermal Power Plant Construction Project, Pangalengan, West Java, HSE Dept.)
  4. 1999 – 2002 : JOB Pertamina-Gulf Resources, Jambi, Sumatera, HSE Dept. (under contract services of SUCOFINDO Main Office Jakarta & PT Guna Persada Engineering)
  5. 2003 – now : Caltex/Chevron Pacific Indonesia (CPI), Riau, Sumatera, HES Management System Audit Project in Drilling & Wellwork Operations (under contract services of PT Surveyor Indonesia – Pekanbaru)

Chronology of Job Position’s Career of Ir. Didi Sugandi,Bc.M is as follows:

Helper (2 years) à Prod. Operator III (1 year) à Study Assignment at AKAMIGAS Cepu (3   yrs) à Prod. Technician I ( 1.5 yrs) à Safety & Fire Protection Supv. (3.5 yrs) à Asst. Prod. Supv. (2 yrs) à Prod. Supv. (2 yrs) à Sr. Prod. Supv. (2 yrs) àStudy Assignment at UPN Veteran (4.5 yrs) àHead Prod. Supv. (1 year) àProd. Superintendent (2 years) à Loss Prev. & Env. Dept. Head (3 yrs) à HSE Superintendent (1 year) à Safety Manager (1 year) à Sr. Manager HSE (1 year) à HSE Advisor ( 2 yrs) à Continuous Drilling Safety Audit Coordinator (3.5 yrs) à Drilling & Completion Safety Management System Audit Coordinator (3.5 years).

Starting from 1992 till now (in his offschedule of work), Ir. Didi Sugandi,Bc.M being trainer,consultant, auditor and specialist on HSE topics for many companies in Indonesia.

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Working At Height (BANDUNG)

 

Working At Height (BANDUNG)

TRAINING TIME :  

  • 20 Aug 2018-21 Aug 2018
  • 20 Sep 2018-21 Sep 2018
  • 15 Oct 2018-16 Oct 2018
  • 22 Nov 2018-23 Nov 2018
  • 20 Dec 2018-21 Dec 2018

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :  2 days

BACKGROUND:
Employee may need work in elevation situations. The tasks can be as simple as changing a light bulb or difficult as painting chimney or tower erection. Both of these work situations require fall protection for the employee while the job is being done. At greater heights, as in construction or utility work fall protection becomes mandatory under most safety regulations. Company can use many methods to prevent employees from falling.

TRAINING BENEFITS:
The purpose of this workshop is to give you the basic knowledge and skills to preventing workers from experiencing disastrous accidental fall from elevations.

OBJECTIVES:  
This presentation will discuss:

  • The working conditions that prompt use of fall protection
  • Options that are available to protect workers from falls

At the end of this topic, you will be able to:

  • List at least four methods of fall protection available for protecting workers
  • State the main criteria that prompts use of fall protection for construction workers

THIS TRAINING IS DESIGNED FOR:

  1. Manager K3/ staff K3
  2. Inspector LK3
  3. HSE Manager/ Engineer/ Supervisor
  4. Plant Manager
  5. Maintenance Manager/ Engineer
  6. Process facility manager/ Engineer
  7. Field manager/ engineer
  8. Contractor
  9. The other person who interested in

TRAINING MATERIAL OUTLINE:

  1. Duty to Have Fall Protection.
  2. Controlled Access Zones –
  3. Safety Monitoring Systems
  4. Covers
  5. Protection From Falling Objects
  6. Fall Protection Plan
    • Management leadership and employee participation
    • Hazard identification and assessment
    • Hazard prevention and control
    • Information and training
    • Evaluation of program effectiveness
  7. Training Requirements
    • Location of sources and potentially hazardous areas
    • Health effects and current and proposed standards
    • Extent of exposure compared to standards, common sources and background
    • Required SOP’s and controls
    • Optional controls employees may use
  8. Retraining

TRAINING METHODS:
The training is provided in the form of exposition, discussion, and case studies

INVESTATION PRICE/PERSON :    

  • Rp 3.950.000/person (full fare)  or
  • Rp 3.750.000/person (early bird, payment 1 week before training)  or
  • Rp 3.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Bambang Pamudji, B.Sc.,SE. has much real experiences, he is former Senior Health and Safety staff at PT. Pupuk Sriwidjaja,PUSRI(Urea Fertilizer Manufacturer) Palembang. He was born in Pasuruan East Java, 14 March 1950. He got his B.Sc in Public Health from APK Surabaya in 1971 and was graduated from Economic Management Sriwidjaja University, UNSRI, Palembang in 1996. He has certificates in Health, Safety, and Environment (HSE) from Depnakertrans RI/Institutions and Universities in Indonesia, institutions and Universities in UK, and National Safety Council. Experienced in setting up Health and Safety Management System documentation and its application. Experienced internal lead auditor SMK3 in PT. Pupuk Sriwidjaja, and External lead auditor SMK3 for Indonesian Association Fertilizer Producer. He has been teaching industrial training classes for many classes related to topics of his competencies, HSE. Many participants from many companies in Indonesia have participated in his training classes.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pressure Safety Valve : Selection And Sizing (BANDUNG)

 

Pressure Safety Valve : Selection And Sizing (BANDUNG)

Tanggal

03 Sep 2018-05 Sep 2018
29 Oct 2018-31 Oct 2018
05 Nov 2018-07 Nov 2018
26 Dec 2018-28 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING  OBJECTIVES:
The function of a pressure safety valve is to protect pressure vessels, piping systems, exchanger, boiler and other equipment from pressures exceeding their design pressure by more that a fixed predetermined amount. The permissible amount of overpressure is covered by various codes and is a function of the type of equipment and the conditions causing the overpressure. Failure of safety valve can cause cathastropic accident. Periodically inspection, testing and repair is one of the most important element that the safety valve work properly.This course explains how safety valve and relief functions and how to maintains and ensure long life operation.

TRAINING MATERIAL OUTLINE :

  1. PSV type and application
  2. Recognize manufacture type and size
  3. Operation, performance and opening characteristic .
  4. Recognizing, part, component and materials
  5. Assembly
  6. PSV degradation material
  7. Painting and surface preparation
  8. Periodic checking, testing and readjusting

WHO SHOULD ATTEND THIS TRAINING?:
This course is designed for  technicians who use, select, install and service of pressure safety valve or everyone who want to know this topic.

TRAINING DURATION :  3 hari

INVESTATION PRICE/PERSON :    

  1. Rp.5.950.000/person (full fare) or
  2. Rp. 5.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 5.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Budi Lukman Hakim,MT. lulusan dari  teknik mesin ITB dengan konsentrasi di teknik material. Beliau memiliki pengalaman praktis seperti menjadi Engineering Adviser & Business Development, Project Manager/ Focal Point, Engineering & Business Development Manager, QA/QC Manager, Turbocharger Gas Turbine maintenance and Oob Wheel Assembly Fabrication di ConocoPhillips Indonesia, Valve Maintenance and Repair Service di ConocoPhillips Indonesia, Electrical & Instrument Maintenance service Project at BP LNG Tangguh, Valves Maintenance & management service Project STC 0136 & 0265 at west java offshore, Darajat Unit III Power Plant & Steamfield Geothermal Project, Suban Phase 2 Gas Project Conoco Phillips, LPG & Sulfur Recovery Pertamina Cilacap Project, Balongan Blue Sky Project, Mechanical Valves Partnering di chevron pacific Indonesia, Piping Instalations & maintenance for Shutdown project – Pertamina UP II Dumai, Maintenance of Piping Installations in South Sumtera (Grissik), dll, Beliau juga mengajar sebagai dosen di kampus swasta di jawa barat. Pengalaman praktis beliau akan didiskusikan dengan peserta training di kelas-kelas training Beliau.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

HAZOPS (Hazard And Operability Studies) BANDUNG

 

HAZOPS (Hazard And Operability Studies) BANDUNG

Tanggal

  • 16 Oct 2017-19 Oct 2017
  • 20 Nov 2017-23 Nov 2017
  • 05 Dec 2017-08 Dec 2017

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

OVERVIEW:
Hydrocarbon processing industry is categorized as a high risk industry due to the hazards containing either in the material processed or the operations used in its facilities. Because of its vulnerability, a simple event, either man-made or natural one may lead to significant disasters. Flixborough, Bhopal, Piper Alpha disasters are classic examples of major accident causing serious loss of life and/or property. A deep understanding on safety related aspects of the materials and processes or operations implemented in hydrocarbon facilities is therefore critical to operate this kind of industry in safe manner and preventing it to go wrong. The course provides a thorough understanding of the HAZOP techniques and experience of their application. Legislation and best practice require companies to proactively manage health and safety of employees and public. The HAZOP Technique is a widely used method of identifying hazards and operability problems, providing the foundation for the risk assessment process. HAZOP can reduce pre and post start-up modifications and improve productivity and product quality. On course, the lectures are underpinned by syndicate exercises.

OBJECTIVES:

  1. Give an appreciation of the risk management process to position HAZOP within that process
  2. Provide an in-depth understanding and experience of the various HAZOP techniques and their correct s.

TRAINING MATERIAL OUTLINE:
Day 1 :
1.    Introduction and course objectives
2.    Basic Surface Safety System
3.    Process Variable & Component Operating Conditions
4.    Undesirable Events

Day 2 :
1.    Protection Concept
2.    Process Safety System & Devices
3.    Predictive Process Hazard Analysis (PHA) techniques and methodologies
4.    Overview of the HAZOP process Risk ranking at the HAZOP study

Day 3 :
1.    HAZOP process in detail including the follow up and review process
2.    Introduction to technique for procedural HAZOP
3.    The role of the chairman, secretary and the team members
4.    Workshop-exercise HAZOP

Day 4 :
1.    Workshop-simulation HAZOP including discussion of results 2
2.    HAZOP actions/recommendations and HAZOP reports
3.    Advantages and disadvantages of the HAZOP technique
4.    Pointers for effective HAZOP Course review including question and answer

WHO SHOULD ATTEND THIS TRAINING?:
Course is aimed at all those concerned with the safe and efficient performance of potentially hazardous Plant and operations:
1.    Managers
2.    Process Engineers
3.    Instrument Engineers
4.    Structure Engineers
5.    Electrical Engineers
6.    Mechanical Engineers
7.    Safety and Environment Engineers
8.    Plant Operators

INVESTATION PRICE/ PERSON :     
1.    Rp 7.500.000/person (full fare)  or
2.    Rp 7.250.000/person (early bird, payment 1 week before training)  or
3.    Rp 6.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. In Jumanda Kasdadi, MT is graduated from Chemical Engineering Bandung Institute of Technology (ITB)and now he is lecturer at chemical engineering poltek ITB (Polban).  Ir. In Jumanda Kasdadi, MT has experienced to be instructors at industrial training more than 13 years, both either  inhouse training or public training. Trainings that delivered by him for many companies  such as for oil and gas, for mining, for manufacture and etc. held in some cities in Indonesia like Jakarta, Bandung, Batam and others.

Beside training, Ir.Injumanda Kasdadi,MT also have experiences at some professional engineering working such as:

  1. Risk Assessment at oil & gas
  2. Project of Processing at process design
  3. Facility for waste handling
  4. Piping and feasibility study of pipeline in onshore and offshore
  5. And others

This much valuable experiences will be shared to participants in training class.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Ergonomics for Excellent HSE Management

 

Ergonomics for Excellent HSE Management

Tanggal
30-31 Oktober 2017

Tempat
Amaris Hotel – Mampang / Amaris Hotel La Codefin Kemang

Investasi
Rp. 3850000,- (Group; REG for 3 person/more; payment before 23 Oct 2017)
Rp. 4050000,- (Early Bird; REG before 16 Oct 2017; payment before 23 Oct 2017)
Rp. 4550000,- (On The Spot; payment at the latest 30 Oct 2017)
Rp. 4925000,- (Full fare)

Latar Belakang
Without ergonomics, HSE management is not enough. Ungkapan ini telah disampaikan oleh berbagai pakar dan praktisi HSE (Health, Safety dan Enviroment) atau K3L. Berbagai permasalahan HSE sering muncul, mulai dari near-miss hingga kecelakaan fatal, karena tidak diperhatikannya berbagai faktor manusia di berbagai lini operasi perusahaan (misalnya logistik, produksi, maintenance, pekerjaan kantor, dsb). Sentuhan ergonomi diperlukan dalam manajemen HSE.

Sayangnya, ergonomi sering disalah-artikan. Ergonomi dianggap mahal dan hanya dikaitkan dengan aspek kenyamanan kerja atau bagian kecil dari aspek industrial hygiene.  Padahal, tujuan ergonomi selaras dengan tujuan manajemen HSE yakni untuk menciptakan sistem kerja yang aman, sehat dan bahkan lebih produktif.  Dengan ergonomi, sistem kerja dipastikan dirancang sedemikian rupa dengan memperhatikan variasi pekerja dalam hal kemampuan dan keterbatasan (fisik, psikis, dan sosio-teknis). Semua rancangan dilakukan dengan pendekatan human-centered design (HCD), baik pada alat, mesin, tempat kerja, prosedur kerja, sistem informasi dan sistem organisasi.  Yang tentu semua itu akan membawa manfaat bagi bisnis perusahaan, karena ergonomic is economic.

Kenyataan di industri, banyak sekali sistem kerja yang tidak dirancang secara ergonomi yang harus menjadi perhatian dalam manajemen HSE. Kondisi berikut menunjukkan beberapa indikasi berikut:

  1. Sering terjadi accident atau near-accident
  2. Pekerja sering melakukan kesalahan (human error)
  3. Pekerja mengeluhkan adanya nyeri atau sakit pada leher, bahu, punggung, atau pinggang
  4. Pekerja terlalu cepat lelah dan butuh istirahat yang panjang
  5. Alat kerja atau mesin yang tidak sesuai dengan fisik pekerja
  6. Posisi kerja yang sering membungkuk dan menjangkau
  7. Lingkungan kerja yang tidak teratur, bising, pengap, atau redup
  8. Pekerja mengeluhkan beban kerja (fisik dan mental) yang berlebihan
  9. Komitmen kerja yang rendah
  10. Rendahnya partisipasi pekerja dalam sistem sumbang saran

Jika indikasi tersebut ditemui di perusahaan Anda, maka perusahaan Anda membutuhkan evaluasi dan intervensi ergonomi. Manajemen HSE sangat berperan untuk memulai suatu perubahan di perusahaan (menjadi champion) dengan melakukan pemetaan dan mengukur besaran resiko ergonomi yang ada saat ini untuk kemudian disampaikan kepada pimpinan puncak.

Sasaran
Secara spesifik, workshop ini diarahkan agar peserta:

  1. Mampu memahami dengan baik konsep prinsip-prinsip ergonomi dan peran utamanya dalam manajemen HSE
  2. Mampu memahami berbagai faktor resiko ergonomi beserta dampaknya, serta mampu mengkuantifikasinya
  3. Mampu melakukan evaluasi ergonomi (ergonomic assessment) dalam setiap aspek lini operasional perusahaan

Outline
Workshop ini akan membekali Anda dengan konsep dan teknik terbaru Ergonomi berupa:

  1. Filosofi ergonomi
  2. Faktor resiko ergonomi
  3. Musculoskeletal disorders
  4. Evaluasi penanganan material secara manual
  5. Evaluasi lingkungan fisik kerja
  6. Metode-metode ergonomics assessment (Nordic Questionnaire, REBA, QEC, HR-reserved)

Metode Penyampaian Workshop
Pelatihan ini akan sarat dengan pembahasan konsep, teknik-teknik dan disertai contoh penerapannya dalam praktek. Studi kasus yang disiapkan khusus oleh instruktur akan dimanfaatkan secara penuh untuk meningkatkan efektivitas workshop ini. Secara rinci, komposisi workshop ini adalah sebagai berikut :
•    Konsep (teori)         : 40%
•    Latihan/Simulasi   : 40%
•    Studi Kasus               : 20%

Target Peserta

  • Staf dan manajer K3L/HSE perusahaan, termasuk safety officer maupun industrial hygienist
  • Praktisi K3L

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

H2S Awareness (BANDUNG)

Jadwal Training

H2S Awareness (BANDUNG) TRAINING MATERIAL OUTLINE : Introduction to H2S Awareness Physical Properties and Chemistry of Hydrogen Sulfide (H2S) Hydrogen Sulfide in the Oil & ... Baca Selengkapnya

H2S Awareness (BANDUNG)

 

H2S Awareness (BANDUNG)

TRAINING MATERIAL OUTLINE :

  1. Introduction to H2S Awareness
  2. Physical Properties and Chemistry of Hydrogen Sulfide (H2S)
  3. Hydrogen Sulfide in the Oil & Gas Industry
  4. Hydrogen Sulfide (H2S) Sources and Hazards (H2S effect to individuals, metals, polymers, etc)
  5. Proper donning, doffing, and storage of SCBA
  6. Protection against H2S hazards
  7. Gas Detection Methods and Detection of H2S
  8. Personal Protective Measures
  9. Contingency Plans & Rescue Response including First Aid
  10. Emergency Response and Rescue Procedures
  11. Safe Working Procedures
  12. Toxicology (toxicity levels, exposure limits, etc)
  13. Acute and chronic effects of exposure
  14. Respiratory protection&self contained breathing apparatus (SCBA)
  15. Discussion, Case Study and Film

INSTRUCTOR:   Ir. In Jumanda Kasdadi, MT. and Team

VENUE :Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION:   3 days

TRAINING TIME: 

  • 06 Sep 2017-08 Sep 2017
  • 04 Oct 2017-06 Oct 2017
  • 20 Nov 2017-22 Nov 2017
  • 27 Dec 2017-29 Dec 2017

INVESTATION PRICE/ PERSON :

  • Rp. 5.950.000/peserta (bayarpenuh) atau
  • Rp. 5.750.000/peserta (early bird, yang membayar 1 minggusebelum training) atau
  • Rp. 5.500.000/peserta (pesertabergroup yang terdiridari 3 pesertaataulebihdari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. In Jumanda Kasdadi, MT is graduated from Chemical Engineering Bandung Institute of Technology (ITB)and now he is lecturer at chemical engineering poltek ITB (Polban).  Ir. In Jumanda Kasdadi, MT has experienced to be instructors at industrial training more than 15 years, both either  inhouse training or public training. Trainings that delivered by him for many companies  such as for oil and gas, for mining, for manufacture and etc. held in some cities in Indonesia like Jakarta, Bandung, Batam and others.

Beside training, Ir.Injumanda Kasdadi,MT also have experiences at some professional engineering working such as:

  • Risk Assessment at oil & gas
  • project of Processing at process design
  • Facility for waste handling
  • Piping and feasibility study of pipeline in onshore and offshore
  • And others

This much valuable experiences will be shared to participants in training class.

 

 

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pemahaman Penerapan Integrasi ISO 9001, SMK3, COC

 

Pemahaman Penerapan Integrasi ISO 9001, SMK3, COC

Tanggal
19-20 September 2017

Tempat
Ashely Hotel / Amaris Hotel La Codefin Kemang

PENTINGNYA COC DAN VLK
Saat ini sertifikat ISO 9001, CoC (Chain Of Custody) FSC (Forest Stewardship Council)  dan SMK3 (PP NO 50 2012) sudah menjadi  persyaratan dari buyer jika perusahaan kayu ingin memperoleh kontrak atau order. Munculnya sikap konsumen tersebut berawal dari kesadaran bahwa kondisi lingkungan terutama hutan semakin memprihantinkan dimana jumlah hutan dan kualitas hutan sejaa tahun 1980an cenderung menurun. Hal tersebutlah yang membuat industri kayu harus menerapkan sistem manajemen Chain  of Custody  (CoC) standar FSC (Forest Stewardship Council), SMK3 Dan ISO 9001.

TUJUAN 

Program bertujuan membantu perserta pelatihan  untuk :

  1. Memahami pentingnya COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  2. Memahami persyaratan persyaratan COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  3. Memahami tahapan dan teknik penerapan COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  4. Memahami sistem dokumentasi COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)

MATERI PELATIHAN
Materi Pelatihan yang akan disampaikan mencakup sebagai berikut :

NoJudul MateriSilabus
1Pemahaman Dasar – dasar COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  1. Kebutuhan Dan Masalah Perdagangan hasil Hutan
  2. Sejarah COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  3. Definisi COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  4. Lingkup COC FSC, ISO 9001  DAN SMK3 (PP 50 2012
  5. Manfaat COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  6. Pentingnya Peduli Dan Paham COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
2Penerapan  Integrasi Persyaratan persyaratan COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  1. Prinsip Prinsip COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  2. Pemahaman per Kriteria,  Indiikator, Verifier  COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  3. Integrasi antara COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  4. Pedoman Penerapan dan contoh penerapan
  5. Sertifikasi COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
4Sistem Dokumentasi COC FSC, ISO 9001  DAN SMK3 (PP 50 2012)
  1. Pengertian dokumentasi
  2. Pendekatan hirarki dokumentasi
  3. Persyaratan sistem dokumentasi
  4. Format Dan bentuk sistem dokumentasi
  5. Tahapan Dan metoda penyusunan dan penerapan  sistem dokumentasi
  6. Contoh contoh sistem dokumentasi
5Pengenalan Peraturan dan Perundang-undangan terkait COC FSC, ISO 9001  dan  SMK3 (PP 50 2012)
  1. Peraturan terkait Perijinan
  2. Peraturan terkait Bahan baku Kayu
  3. Peraturan terkait Manajemen Pabrik
  4. Peraturan Terkait K3
6Tahapan dan Metoda Perancangan dan Penerapan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
  1. Tahapan Perancangan
  2. Metoda Perancangan
  3. Tahapan Penerapan
  4. Metoda Penerapan
  5. Hambatan  Hambatan Perancangan dan Penerapan ISO 9001, CoC FSC dan SMK3
7Test Awal (pre test)
  1. Tujuan untuk mengetahui kondisi awal wawasan dan pengetahuan   awal setiap peserta, mengukur beberapa kesenjangan pengetahuan peserta, dimana dapat menjadi bahan pembahasan  selama pelatihan
  2. Diberikan soal berupa 10 soal, terdiri dari soal memilih (multiple Choice) dan soal essay (jawaban terbuka)
8Test Akhir (Post test)
  1. Tujuan untuk mengetahui tingkat penerimaan peserta (penyerapan) terhadap materi pelatihan yang telah disampaikan  dan  tingkat efektivitas hasil pelatihan
  2. Diberikan soal berupa 20 soal, terdiri dari soal memilih (multiple Choice) dan soal essay (jawaban terbuka)

 

METODA

Pelatihan  dijalankan dengan metoda :

  1. Penyampaian materi
  2. Diskusi
  3. Contoh Penerapan
  4. Workshop/simulasi

HASIL AKHIR
Dari  Program yang dijalankan diharapkan hasil yang akan dicapai adalah :

  1. Peserta  memahami persyaran integrasi COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
  2. Peserta memahami metoda dan tahapan Penerapan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)

 JADWAL  PELATIHAN
Pelatihan dilakukan selama 2 (dua) hari dengan jadwal pelatihan sebagai berikut :

 Waktu Agenda Pelatihan
Hari Pertama
08.15 – 08.30Pembukaan & Test awal Peserta Pelatihan
08.30 – 09.00Dasar dasar COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
09.00 – 10.00Dasar Dasar COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
10.00 – 10.15Istirahat
10.15. – 11.00Persyaratan persyaratan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
11.00 – 12.00Persyaratan persyaratan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
12.00 – 13.00Istirahat
13.00 – 14.00Persyaratan persyaratan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
14.00 – 15.00Workshop  studi kasus Persyaratan persyaratan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
15.00 – 15.15Istirahat
15.00 – 16.30Pengenalan Peraturan dan Perundang-undangan terkait COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
Hari kedua
08.15 – 08.30review materi hari pertama
08.30 – 09.00Persyaratan persyaratan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
09.00 – 10.00Persyaratan persyaratan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
10.00 – 10.15Istirahat
10.15. – 11.00Sistem Dokumentasi COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
11.00 – 12.00Persyaratan persyaratan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
12.00 – 13.00Istirahat
13.00 – 14.00Persyaratan persyaratan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
14.00 – 15.00Workshop  studi kasus Persyaratan persyaratan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
15.00 – 15.15Istirahat
15.15 – 16.00Tahapan dan Metoda Perancangan dan Penerapan COC FSC, ISO 9001  dan SMK3 (PP 50 2012)
16.00 – 16.30Test Akhir/Post Test

 

INSTRUKTUR/TRAINER

Thomas Hidayat Kurniawan, Ir, MM.

Trainer dan Konsultan Sistem Manajemen Chain Of Custody (CoC) standar FSC (Forest Stewarship Council) dan LEI (Lembaga Ekolabel Indonesia), Ahli K3 Umum (Penunjukan Menteri Tenaga Kerja ), Occupational Health and Safety  Management System OHSAS 18001, SMK3 PP 50 2012 (Certified Consultant  by DK3N, Experienced Consultant and Trainer), Environmental   Management System ISO 14001 (Auditor TUV Rheinland, Experienced Consultant and Trainer, Sistem Manajemen Mutu ISO 9001 Quality Management System ISO 9001 (Certified Auditor By IRCA No LA 485, Experienced Consultant and Trainer

Berpengalaman dalam Sistem Manajemen Chain Of Custody (CoC) atau lacak Balak   selama 11 tahun. Standar CoC yang dikuasai adalah standar FSC (Forest Stewardship Council), Standar LEI (Lembaga Ekolabel Indonesia), Standar VLO (Verification Legal Origin – TFF FORM), standar VLO/VLC Smartwood Rain Forest Alliance, Standar VLK (Verifikasi Legaitas Kayu) Depertemen Kehutanan, Standar PEFC (Pan Europa Forest Certification). Selain itu diakui sebagai auditor dengan   dengan  dokumen nomor LEI-AP/04-0400,  Rain Forest Alliance Recognize, NO 473/T/NP/pusdiklat/2011. Mendapat  ilmu manajemen industri kehutanan   saat menjalani pendidikan S1 Fakultas Kehutanan di Institut Pertanian Bogor. Pengetahuan dan ilmu Sistem Manajemen diperdalam saat Kuliah Magister Manajemen (S2) di Institut Pertanian Bogor. Pengalaman sebagai trainer dan konsultan CoC  telah   menangani berbagai perusahaan dan lembaga, baik swasta Nasional, Multinasional dan pemerintah, sebanyak lebih dari 80   perusahaan/Lembaga.  Perusahaan yang sudah ditangani sebagai trainer sebanyak lebih dari 30 perusahaan. Sebagai Konsultan sudah menangani  30 perusahaan. Untuk proses audit pernah melakukan audit pada 26  perusahaan. Selain itu memilki  jaringan dengan beberapa Lembaga Sertifikasi karena pernah melakukan proses audit   atas nama Lembaga Sertifikasi  BMTRADA,  Mutu Agung Lestari, TUV Rheinland International, Smartwood Rain Forest Alliance, BSI Management System (Verificator SOP RSPO).  Sebaga Auditor pernah bergabung di PT TUV Rheinland International,dan  PT Mutu Agung Lestari (BM Trada). Memiliki pengalaman bekerja dengan konsultan International South Pole Carbon Asset Management AG Swizerland , dalam proyek Crabon Trade REDD di Papua Nuigini dan Proyek AF RF di Philipina.

Price

Rp. 3.850.000,- (Group; REG for 3 person/more; payment before 12 Sep 2017)
Rp. 4.050.000,- (Early Bird; REG before 5 Sep 2017; payment before 12 Sep 2017)
Rp. 4.550.000,- (On The Spot; payment at the latest 19 Sep 2017)
Rp. 4.925.000,- (Full fare)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Hot Work (BANDUNG)

Jadwal Training

Hot Work  (BANDUNG) Tanggal 07 Aug 2017-09 Aug 2017 20 Sep 2017-22 Sep 2017 18 Oct 2017-20 Oct 2017 06 Nov 2017-08 Nov 2017 27 ... Baca Selengkapnya

Hot Work (BANDUNG)

 

Hot Work  (BANDUNG)

Tanggal

  • 07 Aug 2017-09 Aug 2017
  • 20 Sep 2017-22 Sep 2017
  • 18 Oct 2017-20 Oct 2017
  • 06 Nov 2017-08 Nov 2017
  • 27 Dec 2017-29 Dec 2017

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION / BACKGROUND :
There were many lost-time and fatality accidents during hot work jobs especially in oil/gas exploration and production activities. The accident causes were various such as human factors (inadequate knowledge, skill and training, etc.), job factors (inadequate supervision, procedures and proper equipment, etc.) and lack of management (inadequate HSE program, program standards and compliance to program standards, etc.). By attending and implementing consistently the contents of this training course, the above accidents can be prevented.

TRAINING OBJECTIVES AND BENEFITS:
After attending this interesting and valuable training course, the participants will be able to :

  • Know, understand and implement the Basic Principles of Loss Control management
  • Conduct or perform hot work jobs without harm/injury/damage to PEME (People, Equipment, Materials & Environment)
  • Know, understand and prepare all requirements before, during and after hot work jobs.

TRAINING MATERIAL OUTLINE :

  1. Introduction and Background/History/Statistics of the Fatality Accidents due to Hot Work Jobs
  2. Introduction to Basic Principles of Loss Control Management
  3. Introduction to Hot Work Jobs (Definition, Purposes, Personnel Qualification, etc.)
  4. Basic Theory & Application of Fire Prevention and Fire Control
  5. Hot Work Permit and Other Work Permits
  6. Hot Work Allied Equipment
  7. Standard Operating Procedure (SOP) for Various Hot Work Jobs, such as :
    • Hot-Tapping Jobs at Flammable Fluid Storage Tanks
    • Hot-Tapping Jobs at Flammable Fluid Flow Lines & Pipe Lines
    • Hot-Tapping Jobs at Flammable Fluid Equipment & Pressure Vessels (Separators, Heater Treaters, Free Water Knock Outs, Gas Boots/Gas Scrubber/Gas Dryer,etc.)
    • Storage Tank Cleaning, Ventilation and Repairing
    • Other Oil/Gas Wells Drilling, Production and Maintenance/Service Activities
  8. Basic Knowledge of HSE Aspects in Welding and Cutting Jobs
  9. Introduction to Job Safety Analysis (JSA)
  10. Display of Hot Work Jobs Films/VCD
  11. Case Study (One Case Study/Day/Group or 5 course participants, each group has to conduct presentation in front of class and will be discussed with other groups)
  12. Pre-Course Assessment (Pre-Test) ; Post-Course Assessment (Post-Test)
  13. Summary and Evaluation of Training Course

WHO SHOULD ATTEND ?
Technicians, Welders, Group Leaders/Foremen, Supervisors, Authorized Work Permit Issuers from Drilling Department, Production Department, Maintenance Department, Welding & Fabrication Department, HSE/SHE/EHS/HES/K3LL Department, Construction Department and whoever to be involved in hot work jobs.

TRAINING DURATION :
3 days

INVESTATION PRICE/PERSON :

  • Rp 6.500.000/person (full fare)  or
  • Rp 6.250.000/person (early bird, payment 1 week before training) or
  • Rp 5.950.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Didi Sugandi, Bc.M.
Petroleum Engineer, 40 years (1970-2010) ‘hands-on’ work experience in Oil/Gas/Geothermal Exploration & Production Companies (Stanvac Pendopo South Sumatera, Huffco/Vico East Kalimantan, Karaha Bodas Company/KBC Garut West Java, Sumitomo Corp. Pangalengan West Java, JOB Pertamina-Gulf Jambi) in various departments (Production, HRD, HSE) include 1 (one) month (1983) as Flopetrol Production Well Testing Trainee in Total Indonesie (Offshore Oil/Gas Company) Handil Field East Kalimantan and 6 months (1996) as HSE Consultant at Lasmo Oil PLC Malacca Strait (Offshore Oil/Gas Company) and 7 years (2003-2010) as HSE Consultant/Auditor/Trainer of PT Surveyor Indonesia in Drilling and Completion Dept. PT Caltex/Chevron Pacific Indonesia (CPI) Sumatera Operations Area. He has also 18 years experience (1992-2010) as a Petroleum, HSE, Human Resources & Security Trainer both In-House and Public Trainings.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Hazardous Material Safe Handling (BANDUNG)

 

Hazardous Material Safe Handling (BANDUNG)

Tanggal

  • 28 Aug 2017-31 Aug 2017
  • 04 Sep 2017-07 Sep 2017
  • 02 Oct 2017-05 Oct 2017
  • 27 Nov 2017-30 Nov 2017
  • 11 Dec 2017-14 Dec 2017

Pukul
09.00- 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
Many chemical substances are beneficial and essential for our existence. They may be poisonous, flammable, explosive, radioactive, water reactive, corrosive, or they may posses some other property that is cause for regarding them as dangerous. Using the jargon of emergency-response personnel, they are fittingly referred to as hazardous materials. Hazardous materials often harm to people, destroy property and wreak substantial health and environmental damage, so the hazardous materials should be safely handled, transported and stored.

TRAINING OBJECTIVES :
After attending this course, the participants will be able to :

  1. Develop actual skills in hazardous materials handling.
  2. Identify hazardous materials and create an environment of high safety awareness.
  3. Set-up emergency response procedures, organize emergency drills.
  4. Prevent accidental losses caused by mishandling of hazardous materials.

TRAINING MATERIAL OUTLINE :

  1. Government HSE Regulations on Hazardous Materials Handling.
  2. Hazardous Materials in the Workplace
  3. Principles of Occupational Health and Toxicology
  4. Planned Safety Inspections
  5. Identification and Labelling
  6. Material Safety Data Sheet ( MSDS )
  7. Hazardous Materials Storage
  8. Emergency Response Planning
  9. Hazardous Materials Safety Audit
  10. Waste Disposal Control
  11. Hazardous Materials Transportation Safety Procedures
  12. Case Study, Group Discussions & Presentations, Safety Films/VCD Shows
  13. Pre-Test, Post-Test, Course Evaluation.

WHO SHOULD ATTEND ?
Supervisors, Foremen, Technicians, Transportation Equipment Drivers of Deparments who are responsible for Hazardous Materials Handling, including Safety/HSE/SHE/EHS personnel, Laboratory, Logistics/Warehouse or anyone who has to manage Hazardous Materials Safe Handling.

INVESTATION PRICE/PERSON :

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FASILITAS UNTUK PESERTA :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Didi Sugandi Bc. M
He has 38 years hands-on work experiences in Oil/Gas/Geothermal Exploration and Production Companies, 17 years in Production Department with the last position as Production Superintendent, 1 year in Manpower Planning & Development, and 17 years in Health, Safety & Environment (HSE) Department with the last position as Senior Manager HSE. Also he has 10 years experiences as a HSE Trainer/Instructor/Lecturer/Facilitator/Advisor/Consultant/Auditor for various companies and industries, both In-House Trainings and Public Trainings such as Oil/Gas/Geothermal PSC/JOB/TAC, Petrochemicals, Fertilizer Plants, LNG Plants, Power Plants/PLN, Cement Factories, Rubber Industries, Electronic Industries,Agrobusiness Industries, Chemicals Storage & Transportation Companies, Hospitals/Rumah Sakit Umum/Puskesmas especially for Physicians, Paramedics and Nurses, etc. And also as Guest HSE Lecturer at Seminars and Lectures in some Universities/Academy in Indonesia. His formal educational background is Bachelor Degree (Bc. M) from Oil & Natural Gas Academy (AKAMIGAS) Cepu , graduated in 1977 (Study Assignment under PT. STANVAC INDONESIA Sponsorship) and Petroleum Engineer (Ir.) from University of Pembangunan Nasional (UPN) VETERAN Yogyakarta, graduated in 1991 (Study Assignment under HUFFCO/VICO INDONESIA Sponsorship).

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

2024

informasi-seminar.com | infoseminar.co.id