Flow Assurance In Piping Systems (BANDUNG)

Jadwal Training

Flow Assurance In Piping Systems (BANDUNG) Tanggal 13 Jul 2020-16 Jul 2020 18 Agust 2020-21 Agust 2020 14 Sep 2020-17 Sep 2020 19 Okt 2020-22 ... Baca Selengkapnya

Flow Assurance In Piping Systems (BANDUNG)

Jadwal Training

Flow Assurance In Piping Systems (BANDUNG)

Tanggal

  • 13 Jul 2020-16 Jul 2020
  • 18 Agust 2020-21 Agust 2020
  • 14 Sep 2020-17 Sep 2020
  • 19 Okt 2020-22 Okt 2020
  • 16 Nop 2020-19 Nop 2020
  • 14 Des 2020-17 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :  4 days

TRAINING INTRODUCTION:
Flow assurance refers to ensuring successful and economical flow of hydrocarbon stream from reservoir to the point of sale. Flow assurance involves effectively handling many solid deposits, such as, gas hydrates, asphaltene, wax, scale, and naphthenates. In addition, it covers network modeling and transient multiphase. Flow assurance is most critical task during deep water energy production because of the high pressures and low temperature (~4 degree Celsius) involved. The financial loss from production interruption or asset damage due to flow assurance mishap can be astronomical. What compounds the flow assurance task even further is that these solid deposits can interact with each other and can cause catastrophic blockage formation in pipelines and result in flow assurance failure.

TRAINING OBJECTIVES:

  1. Understand flow assurance
  2. Know flow assurance concepts
  3. Understand flow assurance factors
  4. Know flow tube
  5. Know Flowline
  6. Know control systems
  7. Know Code and Guidelines
  8. Understand Integrity management

TRAINING MATERIAL OUTLINE:

  • System Engineering
  • Hydraulics
  • Hydraulics Emulsion
  • Hydraulics Phase Behaviour
  • Hydrocarbon Flow
  • Slugging and Liquid Handling
  • Pressure Surge
  • Line Sizing
  • Design Code and Guidelines
  • VIV and Wave Fatique
  • Steel Tube
  • Control Systems
  • Flowline
  • Hydrates, Waxes and Asphaltenes
  • Integrity Managements of Flexibles

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:
a.    Study Case

INVESTATION PRICE/PERSON :  

  • Rp 8.750.000/person (full fare) or
  • Rp 8.500.000/person (early bird, payment 1 week before training) or
  • Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.  He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Root Cause Failure Analysis (RCFA) BANDUNG

Jadwal Training

Root Cause Failure Analysis (RCFA) BANDUNG Tanggal 20 Jul 2020-23 Jul 2020 04 Agust 2020-07 Agust 2020 21 Sep 2020-24 Sep 2020 06 Okt 2020-09 ... Baca Selengkapnya

Root Cause Failure Analysis (RCFA) BANDUNG

Jadwal Training

Root Cause Failure Analysis (RCFA) BANDUNG

Tanggal

  • 20 Jul 2020-23 Jul 2020
  • 04 Agust 2020-07 Agust 2020
  • 21 Sep 2020-24 Sep 2020
  • 06 Okt 2020-09 Okt 2020
  • 03 Nop 2020-06 Nop 2020
  • 21 Des 2020-24 Des 2020

Duration
4 Days

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION:
Reliability engineering and predictive maintenance have two major objectives: preventing catastrophic failure of critical plant production systems and avoiding deviations from acceptable performance levels that result in personal injury, environmental impact, capacity loss, or poor product quality. Unfortunately, these events will occur no matter how effective the reliability program. Therefore, a viable program must include a process for fully understanding and correcting the root causes that lead to events having an impact on plant performance. The course gives a logical approach to problem solution. The method can be used to accurately define deviations from acceptable performance levels, isolate the root causes of equipment failures, develop cost-effective corrective actions that prevent recurrence. This set is a practical, step-by-step guide for evaluating most recurring and serious incidents that may occur in a plant. The purpose of RCFA & FMEA is to resolve problems that affect plant performance. It should be an attempt to fix blame for the incident. The use of RCFA & FMEA should be carefully scrutinized before undertaking a full investigation because of the high cost associated with performing such an in depth analysis.

TRAINNG MATERIAL OUTLINE :

  1. General analysis techniques: FMEA, FTA, CEA, SEA
  2. Root cause failures analysis (RCFA) methodology
  3. Safety related Issues
  4. Regulatory compliance issues
  5. Process performance
  6. Equipment design evaluation guide
  7. Equipment troubleshooting guide
  8. Equipments: Pump, Fans, Conveyors, compressors, mixer and agitators, dust collector, process rolls, gearboxes, steam traps,
  9. inverter, control valves, seals and packing
  10. Six Thinking Hats Approach
  11. RCFA Practical
  12. RCFA Class Simulation

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:

  • Study Case
  • Simulation

INVESTATION PRICE/PERSON :  

  1. Rp 8.750.000/person (full fare) or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

 

Trainer
Ir.Endra Joelianto, Ph.D.
He is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.  He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Assertive Training (BANDUNG)

Jadwal Training

Assertive Training (BANDUNG) TRAINING TIME : 06 Jul 2020-08 Jul 2020 03 Agust 2020-05 Agust 2020 07 Sep 2020-09 Sep 2020 05 Okt 2020-07 Okt ... Baca Selengkapnya

Assertive Training (BANDUNG)

Jadwal Training

Assertive Training (BANDUNG)

TRAINING TIME :

  • 06 Jul 2020-08 Jul 2020
  • 03 Agust 2020-05 Agust 2020
  • 07 Sep 2020-09 Sep 2020
  • 05 Okt 2020-07 Okt 2020
  • 02 Nop 2020-04 Nop 2020
  • 07 Des 2020-09 Des 2020

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :  3 hari

TUJUAN TRAINING :
Pelatihan ini diarahkan agar peserta memiliki “sikap asetif’’, yaitu : berani “mengatakan apa adanya“  tanpa bertujuan untuk menyakiti atau merugikan pihak lawan bicara. Sikap asertif sangat diperlukan untuk terciptanya hubungan baik dalam bekerja; sehingga para pihak tidak akan merasa mengorbankan perasaaannya; dengan demikian tercipta kondisi “Win & Win” dalam komunikasi yang terjadi.

MANFAAT YANG DIPEROLEH :
Dengan mengikuti pelatihan ini, peserta akan memperolah manfaat :

  • Mengenali “self assets & liabilities“.
  • Mengetahui dasar-dasar hubungan antar manusia.
  • Lebih memiliki kemampuan komunikasi personal.
  • Memahami komunikasi efektif sebagai suatu bentuk “win-win transaction”.
  • Memahami dasar-dasar sikap dalam interaksi (Agresive, Submisive dan ASERTIF).

CAKUPAN MATERI TRAINING:

  1. Mengenal Diri.
  2. Proses Dalam Diri Individu.
  3. Dasar-dasar Hubungan anatar Manusia.
  4. Simak Aktif dan Bicara Konstruktif.
  5. Persepsi & Komunilkasi Personal.
  6. Transaksional Analysis.
  7. Agresif, Submisif dan ASERTIF.
  8. Pengelolaan Konflik.

SASARAN PESERTA TRAINING:

  • Setiap karyawan yang berada di perusahaan.
  • Setiap level pimpinan yang bertanggung jawab untuk memberdayakan bawahannya.

INVESTATION PRICE/PERSON :    

  1. Rp 5.950.000/person (full fare)  or
  2. Rp 5.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 5.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)
  12. Field visit/ trip

INSTRUKTUR TRAINING
Drs. Awan Setiawan, BSc, PSIKOLOG, MBA., MSc. Dilahirkan di Garut, 4 September 1952. Kompetensi utama Beliau  adalah di bidang manajemen dan psikologi terapan. Pendidikan formal Beliau ditempuh di akademi instrumentasi nasional LIN/LIPI Bandung, fakultas psikologi UNPAD Bandung,management trainee LPPM Jakarta, program MBA IPPM Jakarta, dan program M.Sc. dari Jakarta institute management studies. Keahlian di bidang manajemen Beliau meliputi Bussiness Administration, Manajemen Fungsional (Manajemen Keuangan, Personalia, Umum, Pemasaran dan Produksi), keahlian bidang psikologi Beliau meliputi Sistem & Pengelolaan Bidang SDM (Pengadaan, Pengembangan, Kompensasi, Integrasi dan Pemeliharaan SDM), serta pembuatan Peraturan yang berhubungan dengan kepegawaian, Selection/Assessment/Personnel Mapping, keahlian bidang general affair(GA) Beliau meliputi Kesekretariatan, Adminstrasi, Humas, dan Rumah Tangga Kantor. Pak Awan Setiawan pernah menjadi dosen di program S1 di universitas Pasundan Bandung dan universitas nasional Pasim Bandung. Sekarang beliau dosen aktif di program S2 di universitas widyatama Bandung, universitas Maranatha Bandung dan STMIK-LIKMI Bandung. Beliau pernah bekerja di BUMN (Perum-Lembaga Penjamin Kredit), PT. RAYA INCORP (Holding Group Company), dan di PT. Gasco Brothers. Pak Awan Setiawan sudah sering menjadi trainer/pembicara/fasilitator untuk training-training industry untuk perusahaan-perusahaan di Indonesia, Beliau juga sudah sering sebagai konsultan melakukan advisor, seleksi/promosi dan juga assessment/personnel mapping untuk perusahaan di Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Zero Defect Trough Poka Yoke (JAKARTA)

Jadwal Training

Zero Defect Trough Poka Yoke (JAKARTA) Tanggal : 09-10 Juli 2020 06-07 Agustus 2020 14-15 September 2020 05-06 Oktober 2020 09-10 November 2020 14-15 Desember ... Baca Selengkapnya

Zero Defect Trough Poka Yoke (JAKARTA)

Jadwal Training

Zero Defect Trough Poka Yoke (JAKARTA)

Tanggal :
09-10 Juli 2020
06-07 Agustus 2020
14-15 September 2020
05-06 Oktober 2020
09-10 November 2020
14-15 Desember 2020

Jam Pelaksanaan :
08.30 – 17.00 WIB

Tempat :
Alternatif Hotel: Ibis Group, Amos Cozy, The Park Lane, Harris Group, hotel lainnya yang akan kami konfirmasi kemudian

Pembicara / Fasilitator (Alternatif) Zero Defect Trough Poka Yoke:

  • Sachbudi Abbas Ras, ST. MT.
  • Dr. Ir. Nofi Erni, MM.
  • M. Derajat Amperajaya

Metode Training :

  • Offline Training (Di Hotel / Training Center)
  • Online Training (Special By One Get One Free)

Fee Training (Jakarta) :
Rp. 5.950.000,-/ orang (Offline & Online Training)

Private Training :
Rp. 8.000.000,-/ orang (PASTI RUNNING)

Fee Training (Luar Kota) :
Rp. 7.000.000,-/ orang (kirim 1-5 peserta)
Rp. 12.000.000,-/ orang (Minimal 1 orang Running)
Inc : Seminar Kit, Certificate, Lunch, Snack, Souvenir

Materi  Zero Defect Trough Poka Yoke :

  1. Definisi Poka-Yoke
  2. Struktur di dalam proses produksi
  3. Metode pendekatan inspeksi
  4. Kesalahan manusia di tempat kerja
  5. Penyebab defect ditempat kerja
  6. Konsep dan Desain dari Poka-Yoke
  7. Sistem Poka-Yoke yang baik untuk diterapkan
  8. Contoh-contoh penerapan sistem Poka-Yoke
  9. Delapan prinsip-prinsip dasar improvement
  10. Metode penerapan Poka-Yoke dan Zero Defect di perusahaan
  11. Strategi mencapai Zero Defect

Manfaat Training Zero Defect Trough Poka Yoke:

  • Memahami Konsep Poka-Yoke (Mistake Proofing)
  • Memahami hubungan Manusia, Material, Mesin, Metode dan Informasi dengan Defect
  • Memahami manfaat dari penerapan sistem Poka-Yoke

Target Peserta :
Senior Manajer, Manajer Madya, Supervisor, Staff yang berkepentingan peningkatan mutu

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Service Excellent (BANDUNG)

Jadwal Training

Service Excellent (BANDUNG) Tanggal 06 Jul 2020-08 Jul 2020 05 Agust 2020-07 Agust 2020 07 Sep 2020-09 Sep 2020 07 Okt 2020-09 Okt 2020 04 ... Baca Selengkapnya

Service Excellent (BANDUNG)

Jadwal Training

Service Excellent (BANDUNG)

Tanggal

  • 06 Jul 2020-08 Jul 2020
  • 05 Agust 2020-07 Agust 2020
  • 07 Sep 2020-09 Sep 2020
  • 07 Okt 2020-09 Okt 2020
  • 04 Nop 2020-06 Nop 2020
  • 07 Des 2020-09 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   2 hari

TRAINING OBJECTIVE :
Setelah mengikuti pelatihan ini diharapkan peserta dapat memahami apa yang dibutuhkan oleh pelanggan saat ini dan mengantisipasi apa yang mereka inginkan kemudian, dimulai dengan mengukur dan memenuhi apa yang dibutuhkan, kemudian meningkatkan standar kualitas dan efektifitas dengan cara melakukan perbaikan terus menerus.

CAKUPAN MATERI TRAINING :
1.    Memahami kebutuhan pelanggan
2.    Meningkatkan pelayanan pada pelanggan
3.    Meningkatkan kualitas  diri
4.    Mempertahankan hubungan dengan pelanggan
5.    Memelihara proses bisnis
6.    Merealisasikan komunikasi yang efektif
7.    Menggalang hubungan yang baik antar karyawan
8.    Memperbaiki Citra
9.    Mewujudkan visi dan misi perusahaan melalui pelayanan

INVESTATION PRICE/PERSON :  

  1. Rp. 6.500.000/peserta (bayarpenuh) atau
  2. Rp. 6.250.000/peserta (early bird, yang membayar 1 minggusebelum training) atau
  3. Rp. 5.950.000/peserta (pesertabergroup yang terdiridari 3 pesertaataulebihdari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :
1.    Modul Training
2.    Flashdisk Training berisi materi training
3.    Sertifikat
4.    ATK: NoteBook dan Ballpoint
5.    T-Shirt
6.    Ransel
7.    Foto Training
8.    Ruang Training dengan fasilitas Full AC dan multimedia
9.    Makan siang dan 2 kali coffeebreak
10.    Instruktur yang Qualified
11.    Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Ir. Iim Takwim, MM,  sarjana lulusan Universitas Pasundan adalah Ketua Program Studi Teknik Industri pada STT Jabar serta Lecture  of  Production System, Management Information System, Simulation System, Product Design System, Product Design of Facilities, Research of Operation,  System of  Performances  Analysis, Feasibility Study of  Industries, Inventory Control and Network Planning, Performance and Productivites of Management Industries. Begitu banyak  pengalaman  profesi beliau di berbagai  bidang  industri , antara lain :
–    Production System & Procedures Plan of Manufacturing   at PT. IPTN
–    Technical Staff  of Industrial Engineering Division at PT. IPTN (Sub-Contractors,   Off-Load and Industrial Domestic Guidance
–    Assisstant  Manager of HRD  of  Textile Industry
–    Manager of Production in Garments Industry at PT. Fit-U
–    Production Manager and Junior Consultan of ISO 9001
Berbagai  topic Training dan  Scientific Work beliau,  antara lain :
–    Instructure Bar-chat and  Line Balancing Job Establishment and Grading System
–    Awareness and Introduction of   ISO 9001 : 2000 (QMS)
–    Junior of  Management Representative ISO 9001 : 2000 of Production
–    Iron Casting Technology at IRDMMI/MIDC and JICA-Jepang
–    Management Strategi and Competency
–    Total Quality Management
–    Logistic and Supply Change Management (SCM)
–    Integreted System of Industrial Management
–    Cost Of Project  and Tools Management
–    Corporate Social Responsibility
–    Six and Lean Sigma
–    Competency Of Professional-SDM, serta banyak lagi lainnya.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing
Online Learning Training

Corrosion And Scaling Prevention (BANDUNG)

Jadwal Training

Corrosion And Scaling Prevention (BANDUNG) Tanggal 06 Jul 2020-09 Jul 2020 03 Agust 2020-06 Agust 2020 07 Sep 2020-10 Sep 2020 05 Okt 2020-08 Okt ... Baca Selengkapnya

Corrosion And Scaling Prevention (BANDUNG)

Jadwal Training

Online Learning Training
Online Learning Training

Corrosion And Scaling Prevention (BANDUNG)

Tanggal

  • 06 Jul 2020-09 Jul 2020
  • 03 Agust 2020-06 Agust 2020
  • 07 Sep 2020-10 Sep 2020
  • 05 Okt 2020-08 Okt 2020
  • 02 Nop 2020-05 Nop 2020
  • 07 Des 2020-10 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVES :

  • By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more detail about corrosion and scaling mechanism, know more how to prevent corrosion and scaling, understand how to select and use chemicals, discuss and consult their specific problems they are about to bring to the class, and share experiences with others.
  • After completion of this course, participants will understand what corrosion and scaling are and their fantastic devastating potential, why and how they begin, how to detect, predict and monitor their growth, and how to control and prevent these big and serious problems. Participants will know whether or not corrosion and scaling happen in particular oil & gas field and what to do to anticipate the risks.
  • This course is designed as an effective practical shortcut to understand oil & gas field corrosion and scaling prevention, for either corrosion engineers or non corrosion engineering personnel who involve in oil & gas operations and maintenance, pipeline and asset integrity management, pipeline inspection and pigging, material purchasing, chemical selection and injection, produced water handling, hazard and HSE management, and any corrosion and scaling prevention related business activity.
  • The course content and approach are designed to suit participants of different background and different position in the company. It will be delivered as a to-the-point explanation by a professional instructor, utilizing an easy-to-understand examples and illustrations, especially the actual findings in Indonesia.

TRAINING HIGHLIGHTS :

  1. Reservoir and Wellhead Downstream Fluid Characteristics
  2. Down Hole and Wellhead Pressure and Temperature
  3. H2S, CO2, and Acidic Impurities Components
  4. Sour Corrosion and Microbial Induced Corrosion
  5. Equipment and Pipeline Leakage and Rupture by Corrosion
  6. Fluid Properties and the Scaling Tendency
  7. Equipment and Pipeline Plugging by Scaling
  8. Corrosion Monitoring and Scale Prediction
  9. Corrosion Control and Scale Prevention Methods

TRAINING MATERIAL OUTLINE :

  1. Oil, condensate, gas, and water in reservoir
  2. Reservoir fluid and the hydrocarbon PVT diagram
  3. Down hole to wellhead pressure and temperature change
  4. Corrosion and scale in tubing and wellhead downstream
  5. Corrosion and scale in produced water re-injection system and the injection well
  6. Corrosion and scale in sea water injection system
  7. Characteristics of produced water and the ionic balance
  8. The role of H2S, CO2, and acidic impurities in the surface fluid
  9. Nature of H2S corrosion, pitting and stress corrosion cracking
  10. Nature of CO2 corrosion and calcium carbonate scaling
  11. Calcium, barium and strontium scales problems
  12. Carbonate, sulfate, and silicate scales problems
  13. Sour corrosion and top of line corrosion problems
  14. Microbial induced corrosion mechanism and its related problems
  15. Corrosion caused by SRB and the pitting mechanism
  16. Corrosion caused by oxygen penetration
  17. Examples of corrosion damage and pipeline leakage
  18. Examples of scale problems and pipeline plugging
  19. Calculation of ionic balance, and corrosion and scaling indexes
  20. Prediction of corrosion and scale tendency
  21. Corrosion monitoring methods in oil & gas field
  22. Scale monitoring methods in oil & gas field
  23. Oil & gas filed corrosion and scaling prevention methods
  24. Corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals
  25. Dosage and injection methods of corrosion inhibitors
  26. Scale control with inhibitors and the selection of suitable scale inhibiting chemicals
  27. Dosage and injection methods of scale inhibitors
  28. SRB control with biocides and the selection of suitable and low risk biocide formula
  29. Dosage and injection methods of biocides
  30. Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger
  31. Dosage and injection methods of oxygen scavenger
  32. Safety in oil & gas corrosion and scaling prevention
  33. Case studies in tubing and wellhead downstream
  34. Case studies in produced water re-injection
  35. Case studies in sea water injection system

INVESTATION PRICE/PERSON :

  1. Rp 8.950.000/person (full fare) or
  2. Rp 8.750.000/person (early bird, payment 1 week before training) or
  3. Rp 8.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Bag
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Clean Development Mechanism (CDM)

Jadwal Training

Clean Development Mechanism (CDM) Tanggal 13 Jul 2020-14 Jul 2020 24 Agust 2020-25 Agust 2020 14 Sep 2020-15 Sep 2020 26 Okt 2020-27 Okt 2020 ... Baca Selengkapnya

Clean Development Mechanism (CDM)

Jadwal Training

Clean Development Mechanism (CDM)

Tanggal

  • 13 Jul 2020-14 Jul 2020
  • 24 Agust 2020-25 Agust 2020
  • 14 Sep 2020-15 Sep 2020
  • 26 Okt 2020-27 Okt 2020
  • 23 Nop 2020-24 Nop 2020
  • 14 Des 2020-15 Des 2020

Pukul
09.00-16.00 WIB

Tempat
Jakarta (Maxone Hotel Menteng, Balairung Hotel Matraman, Sentral Hotel, Haris Tebet, Gd Muamalat Institute, Ibis Manggadua, Little Amaroossa Residence, Cosmo Amaroossa, Zodiak MT. Haryono, Grand Tjokro)

PENGANTAR PELATIHAN :
Banyak orang telah mendengar tentang Kyoto Protocol, namun masih banyak pelaku industri yang belum mengetahui adanya peluang pendanaan yang bisa di dapatkan dari negara maju untuk memperbaiki kinerja lingkungan di Indonesia melalui skema CDM.

CDM (Clean Development Mechanism) program merupakan salah satu cara yang bisa di tempuh oleh 55 negara maju untuk memenuhi kewajibannya dalam rangka menurunkan gas rumah kaca (GRK). Negara maju tersebut bisa bekerja sama dengan pelaku industri di negara berkembang seperti Indonesia melalui skema CDM. Apabila pelaku industri di Indonesia, bisa menurunkan gas rumah kaca (GRK) melalui skema CDM ini maka akan di hargai sekitar 5 – 50 USD setiap ton gas CO2 (equal) yang berhasil di turunkan.

Program menurunkan GHG green house gas bisa di lakukan dengan berbagai cara misalnya dengan program fuel switching (penggantian bahan bakar) dari bahan bakar dengan emisi gas buang yang tinggi menjadi lebih rendah, atau menggantikan bahan bakar dengan biomass. Program lain yaitu methane gas capture, mengambil dan memanfaatkan gas methane baik dengan teknologi anaerobic system atau dengan program flaring.

Negara Indonesia termasuk negara dengan jumlah program CDM yang masih sedikit di bandingkan dengan China dan India. Sehingga peluang menjalankan program ini masih besar sekali, tinggal bagaimana bisa mengolah kesempatan yang ada.

Training dikemas dengan menarik dengan menghadirkan nara sumber yang sudah berpengalaman dalam dunia industri, mempersiapkan PIN (project idea note) dan mempunyai relasi yang luas terhadap international CDM consultant.

Objektivitas Pelatihan :

  • Pengenalan tentang CDM (Clean Development Mechanism) program
  • Evaluasi peluang CDM program di Industri
  • Cara mendapatkan pendanaan dari program CDM
  • Feasibility study CDM project.

Pelatihan Ini Sangat Penting Bagi :
Manager, Superintendent and Supervisor of Operational functions, Health, Safety & Environmental Senior Staff who is accountable to handle Risk Assessment report evaluation and provide guidance for the companies related to environmental and social risks exposure.

Topik Bahasan :
Training dan workshop ini disusun penyajian dan penyampaiannya secara terstruktur sebagai berikut :

  • Konsep Kyoto Protocol
  • Prinsip CDM program
  • Prosedur CDM
  • PIN (project identify note)
  • PDD (project design document)
  • Stake holder meeting
  •  List out CDM consultant

Method of Training
Training ini disajikan dan disampaikan dalam bentuk

  1. Diskusi
  2. Sharing
  3. Pelatihan study kasus

Instructor
Ir. Dwi Handaya, MK3
Praktisi industri petrokimia lebih dari 18 tahun. Menangani bidang Environmental Waste Water Treatment (WWT) lebih dari 14 tahun termasuk bidang anaerobic system. Mempunyai background dasar dari Teknik Kimia Universitas Tirtayasa Banten dan mendapatkan Magister K3-LH dari Universitas Indonesia, Jakarta. Dari pengalaman bidang anaerobic system, saat ini beliau mendevelop program CDM di berbagai sektor industri di Indonesia. Pengalaman yang luas di gabungkan dengan program CDM menjadikan pelatihan ini semakin menarik untuk di ikuti.

INVESTASI:

  • Rp.4.500.000/person (full fare) or
  • Rp.4.250.000/person (early bird, payment 1 week before training) or
  • Rp.3.950.000/person (if there are 3 persons or more from the same company)

Fasilitas Peserta

  • Modul Training
  • Flashdisk Training berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Dehydration And Glycol Regeneration (BANDUNG)

Jadwal Training

Gas Dehydration And Glycol Regeneration (BANDUNG) INTRODUCTION : The natural gas industry has recognized that dehydration is necessary to ensure smooth operation of gas transmission ... Baca Selengkapnya

Gas Dehydration And Glycol Regeneration (BANDUNG)

Jadwal Training

Gas Dehydration And Glycol Regeneration (BANDUNG)

INTRODUCTION :
The natural gas industry has recognized that dehydration is necessary to ensure smooth operation of gas transmission lines. Dehydration prevents the formation of gas hydrates and reduces corrosion. Unless gases are dehydrated, liquid water may condense in pipelines and accumulate at low points along the line, reducing its flow capacity. Therefore, the removal of the water that is associated with natural gases in vapor form is one critical step in gas processing scheme. Several methods have been developed to dehydrate gases on an industrial scale. The three major methods are: direct cooling, adsorption and absorption. Glycol and methanol injection, glycol dehydration contactor, and glycol regeneration are important issues in gas production operations.

TRAINING MATERIAL OUTLINE :

  1. Overview of the Production of Transportable and Salable Gas
  2. Legal and Safety Requirements in Gas Fuel Market
  3. Reservoir Fluid Type and the Hydrocarbon PVT Diagram
  4. Prevention of Hydrate Formation and the Dehydration Processes
  5. Hydrate Inhibitor and the Methanol and Glycol Injection
  6. Injection System and the Low Temperature Separation
  7. Dehydration in Contactor Column and Glycol Regeneration
  8. Contactor and Regenerator Plant Operation and Controls
  9. Glycol Conditioning and Glycol Losses Control
  10. Plant Maintenance and Troubleshooting

INSTRUCTOR :   Ir.Hilman Ahmad,DCE.and Associates

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION :   4 days

TRAINING TIME :

  • 21 Jul 2020-24 Jul 2020
  • 18 Agust 2020-21 Agust 2020
  • 22 Sep 2020-25 Sep 2020
  • 20 Okt 2020-23 Okt 2020
  • 17 Nop 2020-20 Nop 2020
  • 21 Des 2020-24 Des 2020

 

INVESTMENT PRICE/PERSON:

  1. Rp 8.950.000/person (full fare) or
  2. Rp 8.750.000/person (early bird, payment 1 week before training) or
  3. Rp 8.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Effective Technical Report Writing (YOGYAKARTA + KELAS KHUSUS)

Jadwal Training

Effective Technical Report Writing (YOGYAKARTA + KELAS KHUSUS) DESKRIPSI PELATIHAN Penulisan laporan (report writing) merupakan bentuk menuangkan keterampilan menerjemahkan ide/gagasan inovatif dan kreatif secara profesional ... Baca Selengkapnya

Effective Technical Report Writing (YOGYAKARTA + KELAS KHUSUS)

Jadwal Training

Jadwal Pelatihan dan training

Effective Technical Report Writing (YOGYAKARTA + KELAS KHUSUS)

DESKRIPSI PELATIHAN
Penulisan laporan (report writing) merupakan bentuk menuangkan keterampilan menerjemahkan ide/gagasan inovatif dan kreatif secara profesional kedalam suatu bentuk tulisan/laporan. Perkembangan teknik pelaporan dan penulisan laporan telah berubah dengan pesat.

Laporan harus dibuat dengan seefektif mungkin dan dapat menggambarkan apa yang ingin disampaikan. Kemampuan staff dalam membuat dan menyampaikan pelaporan dengan baik perlu diasah dengan latihan terus menerus hingga didapatkan hasil yang optimal. Dalam penyampaian laporan tersebut, diperlukan kemampuan penyampaian presentasi yang baik agar informasi yang disampaikan dapat dikemas dengan menarik sehingga audience tertarik dan menganggap bahwa informasi tersbebut patut untuk didengarkan.

Dengan pelatihan ini, diharapkan peserta dapat meningkatkan kemampuannya dalam membuat laporan sehari-hari sehingga didapatkan resume yang optimal dan dapat membantu perusahaan terkait dalam kinerja pengambilan keputusan.

TUJUAN DAN MANFAAT PELATIHAN

Setelah mengikuti pelatihan ini, peserta diharapkan mampu untuk :

  1. Memahami teknik pembuatan laporan (report writing) dengan teknik penerjemahan ide/gagasan dokumen tertulis yang efektif.
  2. Memilih dan menggunakan bahasa yang jelas, kuat dan efisien dalam pembuatan laporan guna mengajak audience mendapatkan informasi yang didapatkan dengan positif dan optimal.k
  3. Menulis dan memperbaiki dokumen dengan cepat untuk memenuhi tenggat waktu dan produktivitas yang telah ditentukan.
  4. Memahami teknik pengujian, pemeriksaan dan peninjauan dokumen lebih efektif.
  5. Melakukan identifikasi dan menghindari kegagalan dalam penulisan laporan (report writing).
    Mampu memecahkan persoalan yang berkaitan dengan penulisan laporan (report writing).

MATERI / OUTLINE PELATIHAN

1. Ruang lingkup Komunikasi dan Laporan
• Pengertian dan jenis laporan
• Urgensi penulisan laporan
• Nilai dari suatu laporan
• Tujuan dan manfaat Penulisan laporan
• Konsep Dasar Komunikasi

2. Laporan Teknik yang Efektif
• Kriteria Laporan Efektif
• Struktur Laporan Efektif
• Format Laporan Efektif

3. Tata Bahasa Penulisan Laporan
• Filosofi Bahasa Indonesia yang Baik dan Benar
• Acuan Penulisan Tata Bahasa (EYD)
• Penggunaan Paragraf
• Penggunaan Kalimat
• Penggunaan Kata
• Penggunaan Tanda Baca

4. Penampilan Kesan yang Tepat dalam penulisan laporan
• Pemilihan bahasa
• Pemilihan kata-kata yang tepat
• Pemilihan penggunaan kata ganti & kata sifat yang jelas.

5. Gaya penulisan laporan yang kolaboratif & konsultatif
• Tujuan & manfaat laporan & dokumen pada kegiatan manajemen perusahaan.
• Proses pembuatan laporan sebagai bagian proses bisnis perusahaan.
• Pembaca laporan dan alasan/tujuan pembacaan laporan

6. Teknik Penyusunan Laporan/berbagai jenis laporan : Teknik Penulisan yang Ringkas & Mudah Dipahami

7. Membuat Rincian Laporan Teknik
• Kunci dalam Membuat Laporan Teknik
• Membuat Draft
• Membuat Ringkasan Eksekutif

8. Proses perencanaan laporan
9. Proses persiapan sebelum membuat laporan
10. Proses pembuatan laporan
11. Persiapan dan pengumpulan Data Pendukung serta persiapan Observasi bahan penyusunan laporan
12. Mengedit, Mereview, dan Menyelesaikan Laporan
13. Studi kasus dan praktek pembuatan laporan

Tahun 2020
  • Mei 12-14 | 18-20
  • Juni 2-4 | 9-11 | 16-18 | 23-25 | 30-2 Juli
  • Juli 7-9 | 14-16 | 21-23 | 28-30
  • Agustus 4-6 | 11-13 | 18-19 | 25-27
  • September 1-3 | 8-10 | 15-17 | 22-24 | 29-1 Oktober
  • Oktober 6-8 | 13-15 | 20-22 | 26-28
  • November 3-5 | 10-12 | 17-19 | 24-26
  • Desember 1-3 | 8-10 | 15-17 | 22-24 | 29-31

JADWAL DAN INVESTASI PELATIHAN

  • Yogyakarta / Cavinton Hotel | Rp. 5.250.000/peserta
  • Semarang / Ibis Simpang Lima Hotel | Rp. 6.300.000/peserta
  • Malang / Ibis Malang Hotel | Rp. 6.300.000/peserta
  • Solo / Ibis Solo Hotel | Rp. 6.300.000/peserta
  • Jakarta / Ibis Kemayoran Hotel | Rp. 8.100.000/peserta
  • Surabaya / Santika Hotel | Rp. 8.100.000/peserta
  • Bandung / Serella Hotel | Rp. 8.100.000/peserta
  • Bali / Santika Hotel | Rp. 9.000.000/peserta
  • Batam / Nagoya Plaza Hotel | Rp. 9.000.000/peserta
  • Balikpapan / Ibis Hotel | Rp. 9.000.000/peserta

(biaya tersebut belum termasuk penginapan)

Catatan :

  1. Apabila mendaftarkan peserta dalam minimal jumlah kuota dengan judul dan jadwal yang sama (Jogja, Jakarta dan Bandung : Minimal 2 peserta | Semarang, Solo, Bali, Batam, Surabaya dan Malang : Minimal 3 Peserta), maka peserta / instansi terkait dapat me-request tanggal dan lokasi pelatihan sesuai dengan yang dibutuhkan.
  2. Diskon khusus bagi pengiriman dengan jumlah 3 peserta / lebih
  3. Biaya tersebut belum termasuk penginapan
  4. Biaya belum termasuk PPN 10 % (jika dikenakan*)
  5. Peserta dapat melakukan request materi sesuai dengan kebutuhan

FASILITAS PELATIHAN

  1. Sertifikat Pelatihan (Certificate)
  2. Expert Instructure
  3. Meeting Room Hotel dengan Lunch dan 2 kali Coffe Break
  4. Training kits dan Backpacks
  5. Modul Pelatihan Hard dan Softcopy
  6. USB Flashdisk
  7. Foto Group
  8. Souvenir
  9. Drop dan Pick Up selama pelatihan

METODE PELATIHAN

  • Presentasi
  • Diskusi dan Tanya Jawab
  • Studi kasus
  • Brainstorming
  • Praktek

INSTRUCTURE / FASILITATOR
Tekad Wahyono, S.Psi, M.Si, C Ht
Drs. Z. Bambang Darmadi, MM
Nur Wening, SE, M.Si, Phd
Dan tim

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Keselamatan Pelayaran (YOGYAKARTA)

Jadwal Training

Keselamatan Pelayaran (YOGYAKARTA) PENDAHULUAN : Bahwa pelayaran menempatkan nilai tertinggi pada safety first, crew kapal, kapal, manajemen keselamatan pelayaran. TUJUAN TRAINING : Peserta dapat memahami ... Baca Selengkapnya

Keselamatan Pelayaran (YOGYAKARTA)

Jadwal Training

Keselamatan Pelayaran (YOGYAKARTA)

PENDAHULUAN :
Bahwa pelayaran menempatkan nilai tertinggi pada safety first, crew kapal, kapal, manajemen keselamatan pelayaran.

TUJUAN TRAINING :
Peserta dapat memahami dan terampil dalam menangani persyaratan keselamatan pelayaran sebagai manadatory, baik oleh crew kapal maupun oleh manajemen di darat.

CAKUPAN MATERI TRAINING :

  1. Dasar regulasi keselamatan pelayaran dari IMO : Pilar-pilar regulasi keselamatan pelayaran
  2. Isu-isu keselamatan pelayaran : ship collision dan teroris terhadap pelayaran
  3. ISPS Code : Apa  yang diatur ? dan mengapa ?
  4. ISM Code : Apa yang diatur ? dan mengapa ?
  5. STCW : Apa yang diatur ? dan mengapa ?
  6. Hubungan ISPS Code- ISM Code dan STCW terhadap keselamatan dan keamanan pelayaran
  7. Audit rutin untuk merncegah kecelakaan pelayaran
  8. Rangkuman manajemen keselamatan pelayaran

TEMPAT TRAINING :Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

DURASI TRAINING :3 hari

WAKTU TRAINING :

  • 27 Jan 2021-29 Jan 2021
  • 24 Feb 2021-26 Feb 2021
  • 08 Mar 2021-10 Mar 2021
  • 28 Apr 2021-30 Apr 2021
  • 24 Mei 2021-26 Mei 2021
  • 07 Jun 2021-09 Jun 2021
  • 26 Jul 2021-28 Jul 2021
  • 23 Agust 2021-25 Agust 2021
  • 06 Sep 2021-08 Sep 2021
  • 25 Okt 2021-27 Okt 2021
  • 24 Nop 2021-26 Nop 2021
  • 21 Des 2021-23 Des 2021

HARGA INVESTASI/PESERTA :

  • Rp. 6.500.000/peserta (bayarpenuh) atau
  • Rp. 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp. 5.950.000/peserta (peserta bergroup yang terdiridari 3 peserta atau lebih dari 1 perusahaan yang sama)

 FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Drs. Cahya Purnomo, M.Sc., aktif sebagai lektor pada Akademi Maritim Yogyakarta. Selain banyak melakukan penelitian dan menulis jurnal ilmiah, beliau juga sering memberikan pelatihan/ training untuk materi angkutan laut dan ekspor-immpor /kepabeanan serta tercatat sebagai peneliti ahli angkutan laut pada Departemen Perhubungan.

Beberapa topic training beliau diantaranya :

  1. Perdagangan Internasional
  2. Pembelanjaan Perusahan Pelayaran
  3. Akuntansi Biaya Perusahaan Pelayaran
  4. Kepabeanan

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Steam Turbine: Operation, Maintenance And Troubleshooting (Bandung)

Jadwal Training

Steam Turbine: Operation, Maintenance  And Troubleshooting (Bandung) Tanggal 08 Jun 2020-11 Jun 2020 30 Jun 2020-03 Jul 2020 10 Agust 2020-13 Agust 2020 01 Sep ... Baca Selengkapnya

Steam Turbine: Operation, Maintenance And Troubleshooting (Bandung)

Jadwal Training

Steam Turbine: Operation, Maintenance  And Troubleshooting (Bandung)

Tanggal
08 Jun 2020-11 Jun 2020
30 Jun 2020-03 Jul 2020
10 Agust 2020-13 Agust 2020
01 Sep 2020-04 Sep 2020
12 Okt 2020-15 Okt 2020
09 Nop 2020-12 Nop 2020
01 Des 2020-04 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

SASARAN TRAINING :
Menambah wawasan para peserta dalam memahami turbin  secara integralistik sehingga para peserta akan :

  1. Dapat  memahami  saling  keterkaitan  antara  komponen komponen alat pada turbin.
  2. Dapat mengantisipasi akibat  yang  mungkin  terjadi dengan adanya perubahan perubahan yang sengaja atau tidak sengaja dilakukan terkait dengan turbin.
  3. Mampu  mengembangkan  diri  dalam memahami turbin uap secara baik sehingga   dapat   memikul tanggung jawab di lapangan kerja.

CAKUPAN MATERI TRAINING :
1.    Tingkat keadaan termodinamika uap.
2.    Komponen utama turbin uap, fungsi dan prinsip kerjanya.
3.    Komponen-komponen pembantu, fungsi dan prinsip kerjanya.
4.    Pembangkitan daya.
5.    Parameter operasi turbin uap.
6.    Kendala-kendala operasi.
7.    Operasi :
a.    start-up dan shut-down.
b.    kegagalan operasi (trouble-shooting) : gejala, sebab dan tindakan.
8.    Kerugian pada turbin
9.    Prestasi turbin uap
10.    Pengontrolan turbin
11.    Pelumasan turbin.
12.    Kecepatan putar kritis.
13.    Instalasi turbin dan sistem turbin.
14.    Kemerosotan turbin uap.
15.    Perawatan : routine, terjadwal, break-down.
16.    Troubleshooting.
17.    Material.
18.    Studi kasus.
19.    Diskusi.

INVESTATION PRICE/PERSON :     

  1. Rp. 8.750.000/person (full fare) or
  2. Rp. 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp. 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti bidang Coal Energy , Argonne, Chicago, Ill., USA, bidang Combustion, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy.. Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training  untuk banyak perusahaan di Indonesia seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC  SES LTD, PLTGU  BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain.  Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Analisis Vibrasi (BANDUNG)

Jadwal Training

Analisis Vibrasi (BANDUNG) PENGANTAR: Walaupun kondisi mesin dapat diketahui dengan berbagai teknik analisis seperti: emisi, akustik, analisis pelumas, analisis partikel, pemantauan korosi, termografi, dan pemantauan ... Baca Selengkapnya

Analisis Vibrasi (BANDUNG)

Jadwal Training

Analisis Vibrasi (BANDUNG)

PENGANTAR:
Walaupun kondisi mesin dapat diketahui dengan berbagai teknik analisis seperti: emisi, akustik, analisis pelumas, analisis partikel, pemantauan korosi, termografi, dan pemantauan performansi, namun analisis vibrasi merupakan kunci untuk melakukan predictive maintenance. Pada dasarnya, semua yang bergerak menghasilkan vibrasi. Mesin-mesin tertentu akan menghasilkan vibrasi yang khas, kondisi tertentu pada mesin akan menghasilkan jejak vibrasi yang khas pula. Analisis vibrasi sangat bermanfaat untuk perawatan mesin-mesin berputar, seperti: turbin uap dan gas, pompa, motor, kompresor, mesin kertas, rolling mill, mesin perkakas dan gearbox. Selain itu, analisis vibrasi juga digunakan untuk melakukan diagnosis kerusakan mesin. Bahkan teknik ini juga bisa digunakan untuk perwatan mesin-mesin reciprocating.

TUJUAN TRAINING :
Setelah selesai mengikuti training ini, peserta diharapkan akan:

  1. Mengerti dan memahami tentang prinsip diagnosis kerusakan mesin dengan vibrasi.
  2. Mengetahui cara melukakan shaft alignment.

CAKUPAN MATERITRAINING :

  1. Pendahuluan
  • Berbagai filosofi perawatan mesin
  • Penggunaan analisis vibrasi dalam perawatan
  1. Dasar-dasar Vibrasi
  • Apa yang dimaksud vibrasi,
  • Istilah-istilah: amplitudo, frekuensi, fasa,
  • Sumber-sumber vibrasi
  • Vibrasi paksa
  • Resonansi dan Derajat Kebebasan
  • Frekuensi Pengoperasian Sistem dan Frekuensi Resonansi
  • Time domain dan frequency domain
  1. Perolehan, Pengolahan dan Presentasi Data Vibrasi
  • Alat pengukur
  • Transducer dan Penggunaannya
  • Analisis Frekuensi
  • Analisis Fasa
  1. Diagnosis Kerusakan
  • Unbalance
  • Rotor Eksentrik
  • Poros Bengkok
  • Misalignment
  • Kelonggaran Mekanik (Mechanical looseness)
  • Elemen Gelinding Bantalan
  • Cacat Pada Roda Gigi
  • Cacat Sabuk
  • Masalah Kelistrikan
  • Vibrasi Akibat Aliran
  1. Shaft Alignment
  • Metode dial indikator
  • Metoda laser
  1. Balancing dan Peredaman Resonansi

SIAP SEBAIKNYA MENGIKUTI TARINING? :

Training ini ditujukan untuk :

  • Bidang maintenance
  • Bidang rotating machinery.
  • Bidang reciprocating

INSTRUCTOR :Dr. Ir. Haryadi, MT, and team

VENUE :Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION :4 days

TRAINING TIME :

  • 11 Mei 2020-14 Mei 2020
  • 15 Jun 2020-18 Jun 2020
  • 20 Jul 2020-23 Jul 2020
  • 18 Agust 2020-21 Agust 2020
  • 21 Sep 2020-24 Sep 2020
  • 19 Okt 2020-22 Okt 2020
  • 16 Nop 2020-19 Nop 2020
  • 21 Des 2020-24 Des 2020

INVESTMENT PRICE/PERSON :

  1. Rp. 8.750.000/peserta (bayar penuh) atau
  2. Rp. 8.500.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp. 8.250.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdiskcontain training material
  3. Certificate
  4. NoteBookand Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Dr. Ir. Haryadi, MT, lulusan doktor dari Jurusan Teknik Mesin ITB tahun 2011, adalah dosen aktif pada Politeknik Negeri Bandung (POLBAN) untuk mata kuliah bidang keahlian : Mekanika Fluida, Termodinamika, Mesin Fluida, Mesin Termal, Perawatan dan Perbaikan, Kontrol Proses, Boiler dan Turbin, Mesin Pendingin, Studi Kelayakan Pembangkit Listrik Tenaga Biogas  (PLTBg)

Untuk menunjang kompetensinya beliau tergabung sebagai anggota FBI (Forum Biodiesel Indonesia) dan pernah mengikuti beberapa pelatihan, antara lain:

  1. Analisis Vibasi, 2013
  2. CATIA (CAD, CAM, Analysis), IBM, 2004
  3. CANOE Advanture Program ,CANOE, 2002
  4. Commissioning and Profibus-DP- Programming of Mechatronic System, Adiro, 2000
  5. Dasar automotif, kelistrikan, engine management systems, Fontys, 1999
  6. Mechatronic and Automation Training, Adiro, 1999
  7. Andvanced training in mechatronic and automation, Adiro, 1999
  8. Boiler operator training Depnaker, 1999

Beliau juga tercatat sering kali memberikan pelatihan-pelatihan bagi dunia usaha/ industri seperti : PLTBg Hamparan-Lampung,  PT. Indonesia Power, PT. Perusahaan Gas Negara (Persero) Tbk., PT. PERTAMINA EP, Dirjen Minyak Dan Gas BumiProccess Engineer Kem ESDM, BP Migas, PT. PLN, PT. Pertamina Gas, PLTU Suralaya, Pemkab Kepulauan Anambas, PT Cirebon Power, dll.

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Process Control And Instrumentation (BANDUNG)

Jadwal Training

Process Control And Instrumentation (BANDUNG) Tanggal 08 Jun 2020-11 Jun 2020 29 Jun 2020-02 Jul 2020 10 Agust 2020-13 Agust 2020 31 Agust 2020-03 Sep ... Baca Selengkapnya

Process Control And Instrumentation (BANDUNG)

Jadwal Training

Process Control And Instrumentation (BANDUNG)

Tanggal
08 Jun 2020-11 Jun 2020
29 Jun 2020-02 Jul 2020
10 Agust 2020-13 Agust 2020
31 Agust 2020-03 Sep 2020
12 Okt 2020-15 Okt 2020
09 Nop 2020-12 Nop 2020
30 Nop 2020-03 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

OBJECTIVES :
To understand the scope and utilization of instrumentation and process control technology applicable to industry

WHO SHOULD ATTEND THIS TRAINING?:

  • Senior Technicians,
  • Production Supervisors,
  • Instrumentation Engineers & Technicians

TRAINING MATERIAL OUTLINE :

  1. Instrumentation Symbols and Nomenclature (P&I Diagram)
  2. Measuring Devices
    • Level,
    • Pressure
    • Flow &
    • Temperature
  3. Process Control Principles (Control Objectives)
  4. Feedback Control Loops, Controllers (Control modes & Types)
  5. Control Valves:
    • Types,
    • Flow Characteristics
    • Actuator Types
    • Valve Positioners
  6. Process Control Systems:
    • Control Cascade,
    • Ratio and
    • Feedforward Control
  7. Tuning Control:
    • P,
    • PI,
    • PID
  8. Alarm and Shutdown Devices
  9. Lab. Work

TRAINING DURATION : 4 days

INVESTATION PRICE/PERSON :

  • Rp. 8.750.000/person (full fare) or
  • Rp. 8.500.000/person (early bird, payment 1 week before training) or
  • Rp. 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Dr.Ir. Sutanto Hadisupadmo.MT.,IPM is a lecturer at Physics Engineering Bandung Institute of Technology (ITB), and has been as a Head of Laboratory of Industrial Instrumentation at ITB. He is former Director of Instrumentation Center and Technical Services of ITB. His education started at Engineering Physics, Bandung Institute of Technology (ITB-1977), then at Diplome Universite in Energetique, Universite de Prepignan, France (1985), Magister Engineering in Instrumentation and Control (ITB) and Doctor (ITB). He has over 20 years of experience doing training, consulting work in instrumentation, measurement, safety and process control and Mr. Sutanto has trained many training/courses for many companies in Indonesia such as PT. TOTAL Indonesie, Pertamina, PT. Petrokimia Gresik, PT. Badak LNG, PT. Pupuk Iskandar Muda, PT. Pupuk Kaltim, PT. Jaya Ancol and many others. As professional he has handled many projects in Instrumentation Process, Tools Evaluation, Transmitter, General Evaluation of Instrumentation Specification, Commercial Building Power Audit, Maintenance Management Evaluation, etc. To get more advance information and knowledge he has participated in domestic and overseas training, seminar, workshop and conference as participant or speakers.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Petty Cash Management & Administration (BANDUNG)

Jadwal Training

Petty Cash Management & Administration (BANDUNG) Tanggal 18 Mei 2020-19 Mei 2020 17 Jun 2020-18 Jun 2020 23 Jul 2020-24 Jul 2020 20 Agust 2020-21 ... Baca Selengkapnya

Petty Cash Management & Administration (BANDUNG)

Jadwal Training

Petty Cash Management & Administration (BANDUNG)

Tanggal

  • 18 Mei 2020-19 Mei 2020
  • 17 Jun 2020-18 Jun 2020
  • 23 Jul 2020-24 Jul 2020
  • 20 Agust 2020-21 Agust 2020
  • 24 Sep 2020-25 Sep 2020
  • 21 Okt 2020-22 Okt 2020
  • 18 Nop 2020-19 Nop 2020
  • 23 Des 2020-24 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVE :

  1. Mengerti dasar-dasar pengelolaan kas di dalam perusahaan
  2. Mampu berperan sebagai kontroler dalam perencanaan dan pengendalian petty cash
  3. Mampu merancang pembukuan serta menata keuangan perusahaan

TRAINING MATERIAL OUTLINE :

  1. Cash Concept and Principles
    • Cash Cycle
    • Definition
    • Cash Disbursement
    • Cash Receipt
    • Cash Requirement
    • Source of Cash
  2. Cash Flow Statement
  3. Petty Cash Features
    • Coding Petty Cash
    • Form Petty Cash
    • Petty Cash Information System
    • Petty Cash Opname
  4. Petty Cash Management
  5. Petty Cash Administration

HARGA INVESTASI/PESERTA :  

  • Rp 4.500.000/person (full fare)  or
  • Rp 4.250.000/person (early bird, payment 1 week before training)  or
  •  Rp 3.950.000/person (if there are 3 or more participants from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Achmad Fadjar, SE, MM.Ak, sarjana dan master lulusan Universitas Padjadjaran adalah praktisi serta konsultan senior dalam bidang Akunting, Finance, Marketing dan HR Training & Development. Telah lebih dari sepuluh tahun beliau sebagai praktisi dan pengajar, telah banyak membantu para klien dalam membuka wawasan dan menyelesaikan tugas-tugas pekerjaan dengan effective dan effisien. Pengalaman sekian lama telah mengantar beliau dalam penguasaan berbagai topic ilmu antara lain Effective Presentation & Negotiation Skill, Interpersonal Skill and Communication Skill , Leadership & Team Development for Management Success , SDM Berbasis Kompetensi , Outsourcing Management, Tender & Contract System , Financial & Budgeting, export-import serta banyak lagi topik lainnya.
Beberapa klien/ user yang pernah mengunakan jasa beliau : PT. Timah Tbk. PT Arun LNG, PT. Batu Bara Bukit Kendi, PT. Petrosea Tbk. , PT. Chevron Pacific Ind., PT. Freeport Ind. PT. Banpu ( Infocomindo ), PT. Medco E&P, PT. Semen Gresik ( persero ) Tbk. Petrochina Int’l, PT. Vico Indonesia, Pertamina, Cnooc Ses Ltd., PT. British Petroleum, BP Migas, PT. Pupuk Kaltim, PT. Badak NGL, PT. Inco Ind. Tbk. PT. Nusa Halmahera, PT. Kaltim Pacific Amoniak, PT. Surveyor Ind. PT. Samindo Utama Kaltim, PT. Lekomaras, PT. Nusa Halmahera Mineral, PT. Pusri, PT. Kaltim Prima Coal ( KPC ), PLN, UTSG, HESS Indonesia Pangkah Ltd, PT. Aneka Tambang, PT. Adaro Indonesia, PT. Puncak Jaya Power, PT. Sandvick SMC, PT. Rekayasa Industri, PT. Kideco Jaya Agung, PT. RedPath Indonesia, PT. Kitadin Embalut, PT. Indominco, PT. Centra Indo Teknik, PT. Arutmin, PT RedPath Indonesia, PT. Bama Bumi Sentosa, PT. Santos, PT. Indomuro Kencana Straits, PT. Jasindo, PT. Krakatau Wajatama, PT. Citic Seram Energi, PT. Kaltim Prima Industri, PT. Connoco Phillips Indonesia, Total E & P Indonesie, PT Energi Sengkang, PT. Hexindo, PT. Turbaindo Coal Mining, PT Berau Coal, Poltek Bengkalis,PT. Bank Mandiri, PT. Angkasa Pura 2, Embassy of the Kingdom of Netherlands, PT. Inspindo Mulia, Pertamina Hulu Energi ONWJ Ltd., UNDP, dll.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Natural Gas Processing – Fractination And Refregeration (BANDUNG)

Jadwal Training

Natural Gas Processing  – Fractination And Refregeration (BANDUNG) TRAINING TIME :  15 Jun 2020-18 Jun 020 20 Jul 2020-23 Jul 2020 18 Agust 2020-21 Agust ... Baca Selengkapnya

Natural Gas Processing – Fractination And Refregeration (BANDUNG)

Jadwal Training

Natural Gas Processing  – Fractination And Refregeration (BANDUNG)

TRAINING TIME : 
15 Jun 2020-18 Jun 020
20 Jul 2020-23 Jul 2020
18 Agust 2020-21 Agust 2020
21 Sep 2020-24 Sep 2020
19 Okt 2020-22 Okt 2020
16 Nop 2020-19 Nop 2020
21 Des 2020-24 Des 2020

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :    4 days

INTRODUCTION, GOAL AND OBJECTIVES :
The training material subjects are covered: physical properties, phase equilibria and  vapour liquid equilibrium calculations, water-hydrocarbon systems, natural gas gathering and plant inlet separation, acid gas treating/sweetening, dew  point control and natural gas liquids recovery. The training is designed primarily for engineers and technologists involved in the design, operation, and optimization of gas processing facilities. This training is designed to familiarize technical professionals with the design and operation of propane refrigeration loops used in typical NGL recovery and/or dewpoint control facilities, with an emphasis on design, troubleshooting and performance optimization. A working knowledge of gas compression is required. The principles of natural gas liquids fractionation and cryogenic expander operation are also discussed, including LNG and LPG operations and power recovery from LNG import terminals.

TRAINING MATERIAL OUTLINE :
Day 1:
Physical Properties

  1. Phase Equilibria and Vapour Liquid Equilibrium Calculations
  2. Natural Gas Gathering and Plant Inlet Separation
  3. Problem Solving Session:
    • Oil Characterization
    • Gas Gathering
  4. Dew Point Control and Natural Gas Liquids Recovery
  5. Gas Plant Process Dynamics and Control of Critical Loops
  6. Problem Solving Session:
    • Refrigerated Gas Plant
    • Natural Gas Liquids Fractination
    • Gas Plant Dynamics

Day 2:

  1. Water-Hydrocarbon Systems and Natural Gas Dehydration
  2. Acid Gas Treating and Sweetening
  3. Problem Solving Session:
    • Natural Gas Dehydration with Glycols
    • Acid Gas Sweetening with Amines

Day 3-4:
Fractination and processing

  1. Principles of Distillation
  2. Vapour-Liquid Equilibrium
  3. Mechanics
  4. Characteristics of Good Distillation
  5. Column Design Principles, Including Control Strategies
  6. Case : Methanol Bunyu Process and
  7. Troubleshooting

PARTICIPANTS :

  • New Engineering graduates and Technologists who need to develop an  understanding of Natural Gas Processing Principles and Technology.
  • Professionals who have been working in industry but are new to Natural Gas Processing.
  • Professionals who are familiar with Natural Gas Processing but are  unfamiliar with how process simulators can be used to improve plant  design and optimize plant profitability.

INSTRUCTOR :   Ir. Sudiharto, MT. and Team

INVESTATION PRICE/PERSON :     

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Sudiharto, MT,  is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and  expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003. Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi,  blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM  and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :
1.    Electric Submercible Pump, Problem and Trouble Shooting Mecanism
2.    Crude Oil Analysis
3.    Drilling, Production and Workover Strategy
4.    Well Workover and Completion Stretegy
5.    Petroleum Finance, Acconting and Reservoir Management
6.    Plan of Development in Oil and Gas Industries
7.    Pressure Control for Drilling Engineer
8.    Plan of Development (POD) & Authorization For Expenditures (AFE)
9.    Management Skills Secretary Petroleum Gas and Oil Industries
10.    Pressure Transient Analysis and Well Testing Data Interpretation
11.    Oil Production System and Operation
12.    Formation Damaged and Well Stimulation
13.    Simulasi Reservoir for Petroleum Engineer
14.    Oil and gas transportation/measurement, etc

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2026

Info Seminar | Jadwal Seminar