Intenal Audit HSE (JAKARTA)

Jadwal Training

Intenal Audit HSE (JAKARTA) Training based Performance, “Continual Improvement” TRAINING TIME :   26 Jul 2017-27 Jul 2017 09 Aug 2017-10 Aug 2017 27 Sep 2017-28 ... Baca Selengkapnya

Intenal Audit HSE (JAKARTA)

Jadwal Training

Intenal Audit HSE (JAKARTA)

Training based Performance, “Continual Improvement”

TRAINING TIME :  

  • 26 Jul 2017-27 Jul 2017
  • 09 Aug 2017-10 Aug 2017
  • 27 Sep 2017-28 Sep 2017
  • 25 Oct 2017-26 Oct 2017
  • 08 Nov 2017-09 Nov 2017
  • 28 Dec 2017-29 Dec 2017

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   2 days

PENGANTAR PELATIHAN
Penerapan sistem manajemen terintegrasi Sistem Manajemen Lingkungan (ISO 14001:2004) dan Sistem Manajemen Keselamatan dan Kesehatan Kerja (OHSAS 18001:2007) akan memberi manfaat diantaranya:

  1. Peta bisnis yang terkait aspek lingkungan dan K3 lebih simpel
  2. Potensi penghematan biaya karena penggunaan sumber daya yang lebih efisien
  3. Hilangnya duplikasi dokumentasi
  4. Mengurangi jumlah audit
  5. Peningkatan produktivitas sistem, dsb.

Sebagai salah satu bagian penting dalam Sistem Manajemen Terintegrasi, Audit merupakan alat untuk mengetahui apakah sistem manajemen terintegrasi yang dibentuk dan diterapkan perusahaan sudah memenuhi standar Sistem Manajemen Lingkungan (ISO 14001:2004) dan Sistem Manajemen Keselamatan dan Kesehatan Kerja (OHSAS 18001:2007). Disamping itu audit bertujuan untuk mengetahui apakah sistem manajemen terintegrasi di perusahaan berjalan secara efektif.

Temuan audit internal akan menjadi masukan penting untuk management review yang merupakan forum untuk menilai dan memberikan arah untuk penerapan sistem selanjutnya. Dengan demikian audit internal sebaiknya difokuskan untuk melakukan perbaikan berkelanjutan (continual improvement). Pelatihan ini dirancang untuk mempersiapkan dan meningkatkan kemampuan auditor internal agar mampu melakukan audit sistem manajemen terintegrasi berdasarkan standar audit yang baru yaitu ISO 19011:2002.

Tujuan Program :

  1. Memahami persyaratan ISO 14001:2004, OHSAS 18001:2007 tentang pelaksanaan Audit Internal
  2. Memahami pendekatan audit sesuai dengan ISO 19011:2002
  3. Mampu mengidentifikasi kebutuhan Kompetensi Auditor
  4. Mampu menyusun rencana dan Program Audit Internal
  5. Mampu melakukan Audit Internal dengan pendekatan proses
  6. Mampu menyusun Laporan Audit terhadap sistem manajemen terintegrasi dan kinerja bisnis
  7. Mampu mengidentifikasi potensi improvement dari hasil Audit Internal.

Objektifitas Pelatihan :
Diharapkan setelah mengikuti training, peserta :

  • Mampu merencanakan program audit internal pada sistem manajemen terintegrasi
  • Mampu mengidentifikasi dokumen dan sumber daya dalam melaksanakan audit internal
  • Mampu melakukan persiapan audit internal
  • Mampu melakukan audit internal di semua unit dan persyaratan sistem manajemen terintegrasi
  • Mampu melaporkan pelaksanaan audit internal
  • Mampu bekerjasama dan mendukung Kepala Auditor/ Wakil Manajemen.

Pelatihan Ini Sangat Penting Bagi :
Kandidat Wakil Manajemen, Tim Implementasi ISO 14000/ OHSAS 18000, Manager, Supervisor, Engineer, Praktisi di bidang continuous improvement/ produksi & operasi dan semua pihak yang terkait dengan proses improvement.

Topik Bahasan :
Training dan workshop ini disusun penyajian dan penyampaiannya secara terstruktur sebagai berikut :

  1. REVIEW PERSYARATAN STANDAR ISO 14001:2004 DAN OHSAS 18001:2007 DAN DOKUMENTASI SISTEM MANAJEMEN TERINTEGRASI
  2. PERSYARATAN AUDIT PADA ISO 19011:2002
  3. KOMPETENSI DAN KRITERIA PEMILIHAN AUDITOR
  4. SIKLUS AUDIT : MENGORGANISASI PROGRAM AUDIT INTERNAL
  5. TANGGUNG JAWAB ORANG-ORANG YANG TERLIBAT DALAM PROGRAM AUDIT INTERNAL
  6. PERSIAPAN AUDIT
  7. PERSIAPAN CEK LIST
  8. RAPAT PEMBUKAAN
  9. PENYELENGGARAAN AUDIT
  10. SAMPLING DALAM AUDIT
  11. ASPEK KEMANUSIAAN SELAMA PROSES AUDIT
  12. TEKNIK WAWANCARA
  13. BUKTI OBYEKTIF DAN KETIDAKSESUAIAN
  14. RAPAT PENUTUP
  15. TINDAKAN PERBAIKAN DAN VERIFIKASI LANJUTAN
  16. PELAPORAN AUDIT
  17. DOKUMENTASI AUDIT
  18. SELEKSI, TRAINING DAN KUALIFIKASI DARI INTERNAL AUDITOR
  19. RAPAT TINJAUAN MANAJEMEN
  20. ROLE-PLAY AUDIT

Method of Training
Training ini disajikan dan disampaikan dalam bentuk ceramah dan diskusi

Course Instructors
Yuwono D. Sucipto
Memiliki pengalaman sebagai Quality Management Consultant sejak 1996 dan pernah menempati posisi Training Manager di salah satu proyek World Bank. Beberapa topik unggulan yang beliau bawakan di dunia training diantaranya Internal Quality Audit, Implementation of ISO 9000, Implementation of ISO 14000, Implementation of OHSAS 18000, dan Integrated of ISO 9000, ISO 14000 and OHSAS 18000. Ruang lingkup pengalamannya selain di bidang pelatihan juga sebagai Konsultan Pendamping dalam menerapkan dan mendapatkan penghargaan sertifikasi ISO 9000/ ISO 14000/ OHSAS 18000 selain itu beliau adalah Technical Expert dari Singapore Accreditation Council (SAC)-Badan Akreditasi Nasional Singapura. Sepanjang pengalamannya di dunia training & consultant, beliau membantu di beberapa perusahaan ternama seperti: Panasia Grup, Argo Pantes Grup, Salim Grup, PT. Himalaya, PT. CGN, PT. Industri Sandang Nusantara, perusahaan-perusahaan ADIDAS Group, PT. Anugerah Citra Abadi, PG. Kebon Agung, Universitas Budi Luhur, STMT Trisakti, PT. Kereta Api Indonesia (KAI), PT. Jamsostek, API (Asosiasi Pertekstilan Indonesia), APINDO (Asosiasi Pengusaha Indonesia), beberapa Direktorat Departemen Pendidikan Nasional Republik Indonesia, PT. Medco Energi, PLTU Tarahan, PT. Kaefer Krazu, Security Services dan sebagainya. Yuwono D. Sucipto adalah lulusan ITT/ STTT (Sekolah Tinggi Teknologi Tekstil), Bandung dan Magister Manajemen dari STIE IPWI, Jakarta, serta Lead Auditor of ISO 9000/ ISO 14000/ OHSAS 18000.

INVESTATION PRICE/ PERSON :   

  • Rp 3.950.000/person (full fare)  or
  • Rp 3.750.000/person (early bird, payment 1 week before training)  or
  • Rp 3.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Generator Excitation System (BANDUNG)

Jadwal Training

Generator Excitation System (BANDUNG)  TRAINING MATERIAL OUTLINE : 1.    Introduction to Synchronous Generators a.    What is a synchronous generator? b.    Basic synchronous genartor theory c.   ... Baca Selengkapnya

Generator Excitation System (BANDUNG)

Jadwal Training

Generator Excitation System (BANDUNG)

 TRAINING MATERIAL OUTLINE :
1.    Introduction to Synchronous Generators
a.    What is a synchronous generator?
b.    Basic synchronous genartor theory
c.    The componen parts of a synchronous generator
d.    Synchronous generator examples

2.    Introduction to Excitation Systems:
a.    What is an Excitation System?
b.    Basic Excitation Theory
c.    Why do we need one?
d.    Excitation system examples

3.    Brushless / rotating excitation systems
a.    What is brushless excitation ?
b.    Brushless and rotating – what’s the difference?
c.    Advantages and disadvantages
d.    Case studies

4.    Static Excitation System
a.    What is Static Excitation ?
b.    Advantages and disadvantages
c.    Case studies

5.    The Capability Diagram (Operating Chart)
a.    What does the capability diagram tell us?
b.    Different types of Diagram
c.    The under Excitation limiter
d.    The over Excitation limiter
e.    Case Studies

6.    Excitation System Components
a.    The PMG / HFA
b.    The Exciter
c.    The Reciter
d.    The Static rectifier
e.    The excitation transformer
f.    AVR Output Stages
g.    Component Examples

7.    Closed Loop Control Theory
a.    Genarator Voltage Control
b.    Field Current control
c.    The Tansfer Function Diagram

8.    Parallel Operation of Generators
a.    Problems With Parallel Operation
b.    Droop (Compounding) AVR Control
c.    Reactive Load Sharing
d.    Power Factor Control
e.    Mvar Control
f.    Power Syste, Stabilisers

9.    Commissioning Operation and Maintenance
a.    Excitation System Commissioning
b.    What happens When it Goes Wrong
c.    Transmission Company Compliance
d.    Troubleshooting
e.    Preventive Maintenance
f.    Excitation Performance Evaluation

10.     Excitation System Standards
IEEE std 421.2 – Guide for Identification, Testing, and Evaluation of the Dynamic

11.     Performance of Excitation Control System
IEEE Std 421.5 – Recommended Practice For Excitation System Models

INSTRUCTOR :   Ir. Hasan Surya, MT. and Team

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION : 4 days

TRAINING TIME :

  • 22 Aug 2017-25 Aug 2017
  • 05 Sep 2017-08 Sep 2017
  • 03 Oct 2017-06 Oct 2017
  • 06 Nov 2017-09 Nov 2017
  • 19 Dec 2017-22 Dec 2017

INVESTMENT PRICE/PERSON:

  1. Rp 7.950.000/person (full fare) or
  2. Rp 7.750.000/person (early bird, payment 1 week before training) or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN) and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Inventory Management For Raw Material (BANDUNG)

Jadwal Training

Inventory Management For Raw Material (BANDUNG) Tanggal 14 Aug 2017-16 Aug 2017 04 Sep 2017-06 Sep 2017 02 Oct 2017-04 Oct 2017 20 Nov 2017-22 ... Baca Selengkapnya

Inventory Management For Raw Material (BANDUNG)

Jadwal Training

Inventory Management For Raw Material (BANDUNG)

Tanggal

  • 14 Aug 2017-16 Aug 2017
  • 04 Sep 2017-06 Sep 2017
  • 02 Oct 2017-04 Oct 2017
  • 20 Nov 2017-22 Nov 2017
  • 27 Dec 2017-29 Dec 2017

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :    3 days

PENGANTAR:
Inventory mendukung keberlangsungan produksi dan pemenuhan permintaan konsumen. Ini berarti inventory diperlukan untuk menekan biaya kehilangan kesempatan. Di satu sisi, inventory membutuhkan tempat, pemeliharaan dan penyediaan. Dua sisi inventory ini menuntut perusahaan merencanakan inventory secara optimal sehingga biaya inventory secara total rendah, baik dari sisi penyediaan maupun dari sisi kehilangan persediaan. Permasalahan inventory menjasi semakin kompleks, ketika setiap barang yang disimpan memiliki karakteristik yang beragam. Selain itu, setiap fase produksi membutuhkan inventory yang beragam. Training ini akan membahas beragam aspek manajemen inventory untuk memperoleh kebijakan inventory yang optimal di setiap fase produksi: peramalan kebutuhan, bahan baku (sebelum produksi), work in process (dalam fase produksi) dan produk akhir (pasca produksi) dengan beragam karakteristik barang yang disimpan.

TRAINING MATERIAL OUTLINE:
A.    Demand Forecasting in a Supply Chain
1.    The Role of Forecasting in Supply Chain
2.    Characteristics of Forecasts
3.    Component of Forecast and Forecasting Methods
4.    Basic Approach to Demand Forecasting
5.    Time Series Forecasting Methods
6.    Measures of Forecast Error

B.    Aggregate Planning in a Supply Chain
1.    The Role of Aggregate Planning in a Supply Chain
2.    The Aggregate Planning Problem
3.    Aggregate Planning Strategies
4.    Aggregate Planning Using Linear Programming
5.    Aggregate Planning in Excel
6.    Implementing Aggregate Planning in Practice

C.    Managing Uncertainty in a Supply Chain : Safety Inventory
1.    The Role of Safety Inventory in a Supply Chain
2.    Determining Appropriate Level of Safety Inventory
3.    Impact of Supply Uncertainty of Safety Inventory
4.    Impact of Aggregation of Safety Inventory
5.    Impact of Replenishment Policies on Safety Inventory
6.    Estimating and Managing Safety Invetory in Practice

D.    Optimizing the Inventory Policy
1.    For Raw Material
2.    For Work In Process
3.    For Final Goods
4.    For Persihable Items

E.    Cost Analysis for Inventory
1.    Types of Cost Analysis
2.    Cost-Effectiveness
3.    Key Attributes of Cost Analysis

WHO SHOULD ATTEND THIS TRAINING?:
Manager and staff of : Inventory planner, Warehouse Managers and Staffs

INVESTATION PRICE/PERSON :     

  • Rp 5.950.000/peserta (bayar penuh)  atau
  • Rp 5.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp 5.500.000/peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Singgih Saptadi, ST.MT.  adalah Master lulusan Teknik Industri ITB yang juga merupakan dosen tetap Teknik Industri UNDIP. Pernah menjabat Kepala Laboratorium Sistem Produksi dan Kepala Laboratorium Sistem Pendukung Keputusan Universitas Diponegoro. Bidang keahlian Beliau adalah Manajemen Operasi, Analisis dan Perancangan Pabrik, Manajemen pemeliharaan, Manajemen Resiko, Analisis Keputusan, Pengambilan Keputusan Multi-Kriteria, Supply-Chain Management Pemodelan dan Simulasi Sistem Industri, E-Business, Perencanaan dan Perancangan Sistem Perusahaan serta Perencanaan Strategis Sistem Informasi. Dengan kompetensi tersebut, Beliau terlibat dalam kegiatan konsultansi di Bank Indonesia, Pertamina, BRI, BNI, Holcim, Conoco Phillips, Freeport dan beberapa industri lainnya, termasuk perguruan tinggi. Selain itu, Beliau banyak memberikan pelatihan untuk industri dalam bidang-bidang kompetensi tersebut

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Performance Analisys And Operating Of Generator Set For Senior Operator And Engineer (BANDUNG)

Jadwal Training

Performance Analisys And Operating Of Generator Set For Senior Operator And Engineer (BANDUNG) Tanggal   27 Nov 2017-30 Nov 2017 19 Dec 2017-22 Dec 2017 ... Baca Selengkapnya

Performance Analisys And Operating Of Generator Set For Senior Operator And Engineer (BANDUNG)

Jadwal Training

Performance Analisys And Operating Of Generator Set For Senior Operator And Engineer (BANDUNG)

Tanggal  

  • 27 Nov 2017-30 Nov 2017
  • 19 Dec 2017-22 Dec 2017
  • 15 Jan 2018-18 Jan 2018
  • 19 Feb 2018-22 Feb 2018
  • 19 Mar 2018-22 Mar 2018
  • 16 Apr 2018-19 Apr 2018
  • 28 May 2018-31 May 2018
  • 05 Jun 2018-08 Jun 2018
  • 16 Jul 2018-19 Jul 2018
  • 13 Aug 2018-16 Aug 2018
  • 17 Sep 2018-20 Sep 2018
  • 15 Oct 2018-18 Oct 2018
  • 19 Nov 2018-22 Nov 2018
  • 18 Dec 2018-21 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION:
This training will be presented for the senior operator or junior supervisor or engineer  or those who handle of electrical power generating in industries or mining. It is known that the electrical energy required by industries supplied from outside by PLN in Indonesia. But the electric energy industry required for 24 hours a day is not guaranteed to be supplied by PLN. Therefore, every industry is requiring a backup generator, called the stand-by generator. Where there are some industries or mines have themselves generators to produce electrical energy to be consumed by themselves. So the condition of the performance of the power generator must be analyzed and how the operation of the generator is properly and efficiently to serve the production process. During the training, presentation of the materials will be presented in a comprehensive manner, through the method of presentation of these things easily lead to a more complex, and practically based to a critical analysis.

TRAINING OBJECTIVES:
After completing this training, at the end of the activities you will be able to explain clearly about the analysis, performance, operation of the electrical generator in the industry.

TRAINING MATERIAL OUTLINE:
1.    Function of generator parts
2.    Electromotive force voltage
3.    Characteristics of no load
4.    Characteristics of short circuit
5.    Characteristics of loading and efficiency
6.    Excitation systems
7.    Voltage regulation and its controls
8.    Generator protection
9.    Parallel of generator
10.    Load sharing and the V of the generator
11.    Hybrid generation

TRAINING METHOD:
1. Question – answer
2. discussion
3. Adult education.
4. Presentation is associated with the experience of participants

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Brayan Munthe was born in May 26th 1954. He got his education from electrical engineering IKIP Padang, then diploma of technical teacher training Hawthorn Institute of Education, Melbourne, and his master program from electrical engineering universitas gadjah mada, UGM Yogyakarta. He has followed many courses in Indonesia and also abroad to improve his capabilities. He is lecturer at politeknik TEDC and also at electrical department technical education development center Bandung. He has field experiences because he has done some projects in some companies in Indonesia related to his competencies.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Design Of Heating, Ventilation And Air Conditioning System (BANDUNG)

Jadwal Training

Design Of Heating, Ventilation And Air Conditioning System (BANDUNG) Tanggal 21 Aug 2017-25 Aug 2017 04 Sep 2017-08 Sep 2017 02 Oct 2017-06 Oct 2017 ... Baca Selengkapnya

Design Of Heating, Ventilation And Air Conditioning System (BANDUNG)

Jadwal Training

Design Of Heating, Ventilation And Air Conditioning System (BANDUNG)

Tanggal

  • 21 Aug 2017-25 Aug 2017
  • 04 Sep 2017-08 Sep 2017
  • 02 Oct 2017-06 Oct 2017
  • 30 Oct 2017-03 Nov 2017
  • 04 Dec 2017-08 Dec 2017

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   5 days

ABOUT THIS COURSE:
Heating, Ventilation, and Air-Conditioning (HVAC) Systems cover treatment of air providing for a conditioning space depending on the purpose. Their system designs cover the fundamentals and practical applications for understanding and designing systems of all HVAC systems. The comprehensive coverage of the basic theory, latest terminology, system analysis, optimization concept, and calculation methods to make this the most complete course available today in achieving an economical system.

THIS COURSE OFFERS:
Basics of HVAC to give comprehensively understanding in reducing energy cost. Project exercises are included in this course to give completely engineering economical senses.

BENEFITS:

  • Enable to analyze and recommend the most effective solution available in Mechanical System Design for Building.
  • Enable to utilize energy as possible as saving
  • Familiar and better understanding of all aspects relating to efficient HVAC system in building.

WHO SHOULD ATTEND THIS TRAINING?:
a. Technicians
b. ME engineers
c. Architects
d. And other who responsible for selecting, design mechanical equipments for building

TRAINING MATERIAL OUTLINE :
1. Heat and Air Treatment
a. Basics of Heat and Measurement
b. Thermodynamic Properties
c. Thermodynamic Process
d. Mass Conservation
e. Energy Conservation
f. Psychrometrics
g. Evaporative Cooling
h. Sensible Cooling
i. Latent Cooling
j. Heating Process
k. Heat and Mass Balance
l. Unit of Refrigeration
m. Unit Systems and Conversion

2. Refrigerant and Environment
a. Global Issues in Environment
b. Montreal Protokol
c. Kyoto Protokol
d. Halocarbon Compounds
e. Inorganic Compounds
f. Hydrocarbons
g. Azeotropes
h. Naming Rule for Refrigerants
i. Refrigerant Requirements and Desirable Qualities
j. Basis of Choice of Refrigerant
k. Secondary Refrigerant

3. Refrigeration Systems
a. Vapor Compression Cycle
b. Vapor Absorption Cycle
c. Evaporative Cooling
d. Cooling Tower
e. Storage System

4. Cooling Load Estimation
a. Health and Comfort Criteria
b. Thermal Comfort
c. Air Quality
d. Weather Data
e. Design Condition
f. Internal Load
g. External Load
h. Load Estimation Methods
i. CLTD, CLF, SCL

5. Thermal and Water Vapor Transmission
a. Building Envelope
b. Overall Thermal Resistance
c. Wood Frame Waals
d. Mansory Wall
e. Ceiling
f. Roof
g. Door
h. Window

6. Ventilation and Infiltration
a. Types of Air Exchange
b. Ventilation and Thermal Load
c. Ventilation and Indoor Air Quality
d. Driving Mechanism
e. Airflow Through Openings
f. Natural Ventilation Flow Rates
g. Infiltration
h. Air Leakage
i. Calculation Air Exchange

7. Fenestration
a. Cooling Load through Glass
b. Energy Flow
c. Air Movement
d. Shading
e. Daylighting from Fenestration

8. Air-Conditioning Systems
a. Thermal Distribution System
b. Classic Single-Zone System
c. Outdoor-Air Control
d. Single-Zone Systems
e. Mutiple-Zone Systems
f. Therminal Reheat Systems
g. Dual-Duct or Multizone System
h. Water Systems
i. Unitary Systems

9. Fan and Duct System
a. Basic of Fluid Mechanics
b. Conveying Air
c. Pressure Drop in Duct
d. Design of Duct System
e. Velocity Method
f. Equal-Friction Method
g. Optimization of Duct Systems
h. System Balancing
i. Centrifugal Fans and Their Characteristics
j. Fan Laws
k. Air Distribution in Rooms
l. Circular and Plane Jets
m. Diffussers and Induction

10. Pump and Piping System
a. Water and Refrigerant Piping
b. Comparison of Water and Air as Heat-Conveying Media
c. Water Heater
d. Heat Distribution from Hot-Water System
e. High-Temperature Water Systems
f. Available Pipe and Tubing
g. Pressure Drop in Water Piping Installation
h. Pressure Drop in Refrigerant Piping Installation
i. Pump Characteristic and Selection
j. Design of a Water-Distribution System
k. Sizing the Expansion Tank

11. Optimization in System Selection
a. Strategy to find the best solution
b. How to Obtain an Efficient HVAC System
c. When Water-Cooled Chiller Chosen
d. When Air-Cooled Chiller Chosen
e. Air Distribution Selection
f. Water Piping Distribution Selection
g. Cooling Tower Selection

TRAINING DURATION : 5 days

INVESTATION PRICE :

  • Rp 9.500.000/person (full fare)  or
  • Rp 9.250.000/person (early bird, payment 1 week before training) or
  • Rp 8.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
DR. Ir. I Made Astina, M.Eng. is currently assistant professor of mechanical Engineering, Faculty of Mechanical and Aerospace Engineering ITB. He graduated from Mechanical Engineering Department ITB in 1992. Prior to his Ph.D. obtainment in Engineering (thermodynamics, school of science for open and environmental systems) from Keio University Tokyo, Japan in 2004, he received Master of Science in Engineering (mechanical engineering department) from the same university in 1997. His researches concern on thermodynamic, development of new thermal systems, thermodynamic cycles, air conditioning and refrigeration systems. His papers were published in international and national journals, besides he also presents his papers in international and national seminars. Besides teaching at the university, he also has experiences to give short courses for industrial practical engineers and publics and to collaborate practical consultant works.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Petugas Penyelamat (Rescuer) Ruang Terbatas (BANDUNG)

Jadwal Training

Petugas Penyelamat (Rescuer) Ruang Terbatas (BANDUNG) WAKTU TRAINING: 14 Aug 2017-16 Aug 2017 04 Sep 2017-06 Sep 2017 02 Oct 2017-04 Oct 2017 22 Nov ... Baca Selengkapnya

Petugas Penyelamat (Rescuer) Ruang Terbatas (BANDUNG)

Jadwal Training

Training K3 Safety

Petugas Penyelamat (Rescuer) Ruang Terbatas (BANDUNG)

WAKTU TRAINING:

  • 14 Aug 2017-16 Aug 2017
  • 04 Sep 2017-06 Sep 2017
  • 02 Oct 2017-04 Oct 2017
  • 22 Nov 2017-24 Nov 2017
  • 27 Dec 2017-29 Dec 2017

TEMPAT TRAINING:  di Bandung

DURASI TRAINING: 30 jam pelajaran@45 menit atau 3 (tiga) hari (jam 08.00 – 17.00)

LATAR BELAKANG:
Program ini akan membahas bahaya, peralatan dan prosedur untuk bekerja dengan aman di lingkungan ruang terbatas. Peserta pelatihan akan memperoleh pengetahuan dan keterampilan melalui kombinasi presentasi ceramah, diskusi kelompok, dan latihan praktis individu dan tim.

TUJUAN TRAINING:
Agar peserta mampu bekerja secara aman di ruang terbatas (confined space) dan melaksanakan prosedur kerja sesuai dengan program memasuki ruang terbatas dalam rangka pencegahan kecelakaan kerja dan penyakit akibat kerja serta kegiatan keselamatan kerja dan kesehatan kerja lainnya.

Agar peserta memiliki pengetahuan dan keterampilan yang dibutuhkan untuk melakukan tindakan penyelamatan pada keadaan darurat di ruang terbatas. Peserta pelatihan akan menerima pelatihan dan sertifikasi yang sesuai untuk Petugas yang memasuki ruang terbatas dan Petugas Keselamatan untuk ruang terbatas.

PERSYARATAN  PESERTA:
Berpendidikan minimal SMA/SMU, pengalaman kerja sekurang – kurangnya 2 (dua) tahun pada kegiatan industri yang bekerja di ruang terbatas / tertutup.
Peserta pelatihan harus dalam keadaan kesehatan yang baik dan diharapkan untuk berpartisipasi dalam semua persyaratan pelatihan fisik.

CAKUPAN MATERI :
A.    KELOMPOK DASAR
1.    Peraturan perundang – undangan K3 di ruang terbatas (4 JP)
2.    Dasar – dasar K3 di ruang terbatas (3 JP)

B.    KELOMPOK INTI
1.    Prosedur ijin kerja di ruang terbatas (3 JP)
2.    Prosedur tanggap darurat dan komunikasi di ruang terbatas (4 JP)
3.    P3K di ruang terbatas (3 JP)
4.    Alat pelindung diri / APD di ruang terbatas dan alat bantu pernapasan (3 JP)
5.    Teknik penyelamatan (4 JP)

C.    EVALUASI
1.    Teori (2 JP)
2.    Praktek lapangan (pemasangan fasilitas penyelamatan) (4 JP)

METODE PEMBELAJARAN:   Ceramah, diskusi kelompok, penugasan praktek: pemasangan fasilitas penyelamatan

INSTRUKTUR:  instruktur training ini adalah praktisi dan akademisi dan dari Kemenakertrans RI

HARGA INVESTASI/PESERTA:   

  • Rp 5.250.000(bayar penuh) atau
  • Rp 5.000.000, early bird,yang membayar 2 minggu sebelum training, atau
  • Rp 4.750.000, harga group,jika ada 3 peserta dari perusahaan yang sama

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat dari Kemenakertrans RI, kartu anggota K3 dan SKP(Surat Keputusan Penunjukkan dari Kemenakertrans RI) (disesuaikan dengan ketentuan yang berlaku dari kemenakertrans RI)
  4. ATK: Blocknote dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruangan Training fasilitas Full AC dan multimedia
  9. Lunch dan dua kali coffeebreak
  10. Instruktur yang qualified dari kemenakertrans RI dan dari praktisi serta akademisi
  11. Transportasi untuk peserta dari penginapan peserta ke hotel tempat training PP (jika minimal peserta dari satu perusahaan yang sama ada 4 peserta)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Material Handling & Packaging (BANDUNG)

Jadwal Training

Material Handling & Packaging (BANDUNG) Tanggal 24 Jul 2017-27 Jul 2017 31 Jul 2017-03 Aug 2017 25 Sep 2017-28 Sep 2017 23 Oct 2017-26 Oct ... Baca Selengkapnya

Material Handling & Packaging (BANDUNG)

Jadwal Training

Material Handling & Packaging (BANDUNG)

Tanggal

  • 24 Jul 2017-27 Jul 2017
  • 31 Jul 2017-03 Aug 2017
  • 25 Sep 2017-28 Sep 2017
  • 23 Oct 2017-26 Oct 2017
  • 20 Nov 2017-23 Nov 2017
  • 18 Dec 2017-21 Dec 2017

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVE :
The program provides the participants with basic concept and practical knowledge of materials handling & packaging system, and to enhance participants professional competence in their day to day activity to handle the company’s materials in an effective and efficient manner. By attending this course the participants will have a lot of knowledge and techniques of what, when and how much to move, store and pack materials effectively and efficiently.

TRAINING MATERIAL OUTLINE :
1. Introduction to Material Handling

2. Metallic Materials
a. Standardization
b. Composition
c. Utilization

3. Material Handling Equipment Tools & Accessories
a. Chains & Tackles
b. Links & Hooks
c. Pallets
d. Wire rope & sling

4. Forklift Trucks Operation and Maintenance
a. Forklift Types
b. How Many Forklift be need?
c. Daily Maintenance Troubleshoot

5. Packaging
a. The Role of Packaging
b. What is packaging
c. Package Materials
d. Package Selection

6. Crane Operations
a. Types & Utilization
b. Safety Operation
c. Handle Goods & Containers

WHO SHOULD ATTEND THIS TRAINING?:
All Materials personnel who work Warehouse Purchasing, Inventory Control & Operations whom responsible in move and store materials and keeping stocks. They will get assurance that this course is a very useful souce of information, which they need in their jobs.

TRAINING DURATION : 4 days

INVESTATION PRICE/PERSON :

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Cahyadi Nugraha, MT. is a professional instructor in Logistic Management (topics : procurement/purchasing, inventory control, warehousing, distribution, and supply chain management); Production and Operation Management, Management Information System, Simulation Modelling, and Information Technology. He is undergraduate and master’s from Industrial Management and Engineering ITB. He also teaches in Institut Teknologi Nasional and ITB, and as consultant for several companies and government institutional. Their clients : PT. Timah Tbk. PT Arun LNG, PT. Batu Bara Bukit Kendi, PT. Chevron Pacific Indonesia,  PT. Freeport Indonesia, PT. Medco E&P,  PT. Semen Gresik (persero) Tbk.,  PT. Freefort, PT. Petrochina International,   PT. Vico Indonesia,  PT. Pertamina,  Cnooc Ses Ltd.,  PT. British Petroleum, PT. Pupuk Kaltim,  PT. Badak NGL,  PT. Kaltim Pacific Amoniak,  PT. Bogasari, PT. Lekomaras,  PT. Kaltim Prima Coal (KPC),  PT. Star Energi, PT. Siemens, PT. Transportasi Gas Indonesia, PT. Alumina, PT. Aneka Tambang, PT. Mina Mas, PT. Bank Mutiara, PT. Bank Mandiri, PT. Pikiran Rakyat, Departemen Perindustrian RI, Pemda TK II Kota Bandung, Departemen Perhubungan, Kementerian Negara Koperasi dan UKM, Depdagri, etc.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Grounding System And Lighting Protection (BANDUNG)

Jadwal Training

Grounding System And Lighting Protection (BANDUNG) Tanggal 28 Aug 2017-31 Aug 2017 12 Sep 2017-15 Sep 2017 10 Oct 2017-13 Oct 2017 13 Nov 2017-16 ... Baca Selengkapnya

Grounding System And Lighting Protection (BANDUNG)

Jadwal Training

Grounding System And Lighting Protection (BANDUNG)

Tanggal

  • 28 Aug 2017-31 Aug 2017
  • 12 Sep 2017-15 Sep 2017
  • 10 Oct 2017-13 Oct 2017
  • 13 Nov 2017-16 Nov 2017
  • 04 Dec 2017-07 Dec 2017

Tempat   
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INVESTATION PRICE/PERSON :

  1. Rp 8.950.000/person (full fare)  or
  2. Rp 8.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 8.500.000/person (if there are 3 or more participants from the same company)

OBJECTIVES :
Pelatihan ini ini memberikan pengetahuan dan wawasan mengenai grounding dalam sistem distribusi tenaga listrik. Pelatihan ditekankan pada perencanaan system pentanahan dan perlindungan peralatan dari tegangan lebih petir, operasi dan proteksi sistem distribusi.

TRAINING MATERIAL OUTLINE :

  1. Basic Concepts
    • Purpose of Grounding,
    • Basic Safety Concepts,
    • Terms and Definition
  2. Safety Standards
    • Permissible Body Currents,
    • Permissible Touch and Step Voltages,
    • Design Considerations
  3. Grounding Practices
    • Standards (National/IEEE/IEC),
    • Grounded vs. Ungrounded,
    • Distribution Grounding Electrodes
  4. Ground Potential Rise Calculations
    • Fault Current Distribution,
    • Modeling/Analysis Requirements,
    • Thevenin Equivalent at Neutral, Transmission and Distribution System Interaction, High Impedance Faults
  5. Soil Modeling
    • Soil Structure ,
    • Soil Measurement Techniques,
    • Soil Resistivity Models,
    • Measurement Interpretation
  6. Ground Measurements
    • Fall of Potential Method,
    • The Smart Ground Multimeter,
    • Ground Integrity Tests,
    • Transferred and Induced Voltage Measurements
  7. Distribution System Transients
    • Fault Transients,
    • Lightning,
    • Switching,
    • Ferroresonance,
    • Impact of Grounds – Voltage Sags/Swells,
    • Impact on Power Quality
  8. Lightning Protection
    • Lightning Overvoltages,
    • Mechanisms of Lightning,
    • Lightning Characteristics,
    • Over Voltage Protection,
    • Insulation Coordination,
    • Protection of RTUs
  9. Fault Detection and Isolation
    • Low Impedance Faults,
    • High Impedance Faults,
    • Faulted Circuit Indicators,
    • Fault Distance Indicators

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Pelatihan ini diberikan pada para teknisi, operator maupun supervisor yang bekerja dibidang ketenaga listrikan di industri untuk menangani masalah operasi, instalasi dan pemeliharaan system pentanahan dan proteksi petir

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electrical Power System Analysis Using ETAP (BANDUNG)

Jadwal Training

Electrical Power System Analysis Using ETAP (BANDUNG) Tanggal 21 Aug 2017-24 Aug 2017 04 Sep 2017-07 Sep 2017 02 Oct 2017-05 Oct 2017 14 Nov ... Baca Selengkapnya

Electrical Power System Analysis Using ETAP (BANDUNG)

Jadwal Training

Electrical Power System Analysis Using ETAP (BANDUNG)

Tanggal

  • 21 Aug 2017-24 Aug 2017
  • 04 Sep 2017-07 Sep 2017
  • 02 Oct 2017-05 Oct 2017
  • 14 Nov 2017-17 Nov 2017
  • 11 Dec 2017-14 Dec 2017

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVES :
Pelatihan ini bertujuan meningkatkan pengetahuan dan wawasan mengenai analisa system tenaga. Untuk mensimulasikan hasil Analisa digunakan software Aplikasi ETAP. Pelatihan ditekankan pada analisa pada jaringan tenaga listrik Tegangan menengah hingga tegangan rendah yang meliputi Studi Aliran daya, Analisa Hubung singkat, Analisa Transien dan Harmonisa sehingga setelah mengikuti pelatihan peserta akan dapat :

  • Meningkatkan pengetahuan dan wawasan mengenai kondisi operasi Sistem Tenaga
  • Melakukan analisa Aliran Daya menggunakan ETAP
  • Melakukan Analisa Hubung Singkat menggunakan ETAP
  • Melakukan Analisa Motor Starting menggunakan ETAP
  • Melakukan Analisa Transient menggunakan ETAP
  • Melakukan Studi Harmonisa dan menentukan ukuran Filter

TRAINING MATERIAL OUTLINE :
1. Electric power grid representation and characteristic
(System overview, Elements of Electrical Power System, per-unit System)

2. Building One-Line Diagram Using ETAP
(Add Elements, Select & Deselect Elements, Element and Connector Colors, Relocate Elements, Cut, Copy, & Paste, Size, Symbol, & Orientation, Protective Devices, Nodes & Buses, Group & Ungroup, Composite Networks)

3. Load Flow Calculation Methods
(Newton-Raphson, Fast-Decoupled, Gaus-Siedel)

4. Load Flow Study Using ETAP
(Load Flow Toolbar, Load Flow Study Case Editor, Load Flow Display Options, Load Flow Calculation Methods, Load Flow Required Data, Load Flow Output Reports)

5. Fault Calculation Methods
(Impedance Methode, Symetrical Component Methode)

6. Short-Circuit Analysis
(Short-Circuit Toolbar, Short-Circuit Study Case Editor, Short-Circuit Display Options, Short-Circuit Required Data, Short-Circuit Output Reports)

7. Motor Starting Analysis
(Motor Starting Methods, Motor Starting Calculation)

8. Motor Starting Analysis Using ETAP
(Motor Starting Toolbar, Motor Starting Study Case Editor, Info Page, Model Page, Time Event Pages, Add Action by Starting Category, Add Action by Load, Motor Starting Display Options, Motor Starting Calculation Methods, Motor Starting Required Data, Motor Starting Output Reports, Motor Starting Time Slider Toolbar)

9. Transient Stability Anaysis
(Purpose for Performing Transient Stability Study, Power System Stability Definition, Stability Limits)

10. Transient Stability Anaysis Using ETAP
(Transient Stability Toolbar, Transient Stability Study Case Editor, Info Page, Events Page, Dyn Model Page, Transient Stability Plots, Transient Stability Required Data, Transient Stability Output Reports, Transient Stability Time Slider Toolbar)

11. Harmonic Analysis
(Definition, Harmonic Parameters, Harmonic Sources)

12. Harmonic Analysis Using ETAP
(Harmonic Analysis Toolbar, Harmonic Analysis Study Case Editor, Harmonic Analysis Display Options, Harmonic Analysis Calculation Methods, Harmonic Analysis Required Data, Harmonic Analysis Output Reports, Harmonic Analysis Order-Slider, Harmonic Analysis Frequency-Slider)

WHO SHOULD ATTEND THIS TRAINING?
Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Practice session
  12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Trainer
Ir. Hasan Surya, MT.
He is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at  Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN) and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences and now he is ready to share his knowledge and experiences to industrial world throught training class.

INVESTATION PRICE/ PERSON :

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Preventive & Predictive Maintenance (PPM) BANDUNG

Jadwal Training

Preventive & Predictive Maintenance (PPM) BANDUNG Tanggal 21 Aug 2017-24 Aug 2017 04 Sep 2017-07 Sep 2017 02 Oct 2017-05 Oct 2017 13 Nov 2017-16 ... Baca Selengkapnya

Preventive & Predictive Maintenance (PPM) BANDUNG

Jadwal Training

Preventive & Predictive Maintenance (PPM) BANDUNG

Tanggal

  • 21 Aug 2017-24 Aug 2017
  • 04 Sep 2017-07 Sep 2017
  • 02 Oct 2017-05 Oct 2017
  • 13 Nov 2017-16 Nov 2017
  • 04 Dec 2017-07 Dec 2017

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVE :
Preventive and predictive maintenance is a maintenance system which very reliable to prevent some sudden troubles or breakdown that may happened on factory’s tools/equipments. The sudden troubles are very potential things that caused a big loss in production process. The effects of this problem are some failure to achieve production target, the lack of personnel, unprepared spare parts, etc. Preventive and predictive maintenance application system starts from standard arranging, activity planning, realization supervising, and, as the finish line is, evaluating and analyzing the maintenance’s result.

WHO SHOULD ATTEND THIS TRAINING?
This special course is designed for manager, supervisor, engineer, planer, foreman, and technician. Also, for those who are in operations, engineering and purchasing division and who would like to acquire an understanding of how the quality of the maintenance function affects their function.

WHAT WILL THE PARTICIPANT GET?
After completing this course, participants will be able to:

  • Develop, implement and supervise the preventive and predictive maintenance program
  • Economize the time, money and company’s resources by using sophisticated technique and method in order to optimize the affectivity of maintenance.
  • Prevent the company’s equipment and tools from damage and make the machine’s living period longer.
  • Decrease the down time
  • Increase the profit

TRAINING MATERIAL OUTLINE :
1. Why Preventive & Predictive Maintenance

  • Apprising maintenance performance and effectiveness
  • Typical maintenance controls
  • Reactive maintenance
  • Anticipative maintenance
  • Ascertainment of equipment condition
  • The need for preventive maintenance
  • Why preventive maintenance
  • Preventive Predictive maintenance objectives
  • Preventive Predictive maintenance prerequisites
  • Preventive maintenance feasibility analysis
  • Policies
  • PM program functions
  • Cost impact
  • Saving potential

2. Developing the Preventive Predictive Maintenance Program

  • Assignment of organizational responsibilities typical maintenance functional assignments operational concepts
  • Equipment to be included
  • Equipment inventory sheet – examples
  • Equipment numbering concepts
  • The PM work order
  • Developing the inspection sheet
  • ECS rating sheet as cross reference
  • Sample of equipment components
  • Spare parts and material needs
  • Inspection sheet examples
  • Determining the frequency cycle
  • Frequency cycle examples
  • Scheduled frequency overview
  • Developing job safety practices – typical examples
  • Considering manual versus computerization
  • Predictive maintenance can determine maintenance requirement
  • Predictive maintenance and its applied techniques as part of the PM program
  • Vibration analysis
  • Wear particle analyzing
  • Thermography

3. IMPLEMENTATION OF PREVENTIVE MAINTENANCE PROGRAM

  • Job planning
  • The planning function
  • Planning, Service to do
  • Job planning prerequisite
  • Planners qualifications
  • Duties and responsibilities of planners
  • The hob package
  • Line supervisors qualifications
  • Planning permits Us, to forecast, communicate and measure
  • What job should be planned
  • Time required to perform work…labor content
  • Standard defined
  • Consistency of estimating
  • Estimating methods
  • Work backlog
  • Scheduling of maintenance work
  • PERT and CPM as scheduling tools
  • Loading of the PM work order
  • Load leveling
  • Weekly scheduling
  • Manpower requirements forecasting
  • Forecasting by crew
  • Forecasting by department
  • Weekly schedule – Computer and manual example
  • Training of personnel

4. CONTROLLING THE PREVENTIVE PREDICTIVE MAINTENANCE PROCESS

  • Preventive maintenance administration
  • Planned maintenance
  • Special tools and equipment
  • Service user coordination
  • Equipment availability
  • Service user notification – examples
  • Automotive notification – examples
  • Control reporting
  • What should be included
  • Schedule for supervisor
  • Schedule for supervisor service user
  • Overdue for maintenance and service user
  • Missed PM report for maintenance and service user
  • Complete PM’s
  • Summary report of all PM’s completed
  • Listing of all PM’s set-up in program
  • Planning and scheduling index example
  • Assurance of work performed
  • Conformance and auditing
  • Feedback evaluation/corrective action cycle

5. EXAMINING RESULTS

  • Effectiveness of the preventive maintenance program
  • Refining the PM program
  • 3 Correlating preventive maintenance to breakdown maintenance
  • Measuring and appraising the PM program
  • Equipment history
  • Analyzing equipment failures
  • Some relevant maintenance control indices

6. APPLICATION EXERCISE

  • How to organize, develop and implement a successful preventive maintenance program summary
  • Adapting the PM concept at your location
  • Hands-on exercise

INVESTATION PRICE/ PERSON :  

  1. Rp 7.750.000/person (full fare)  or
  2. Rp 7.500.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flashdisk Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Dr. Ir. Edy Suwondo is a lecturer at the Aerospace Engineering Department, Institute Technology of Bandung (ITB) and a member of the Aircraft Design, Operation and Maintenance Research Group, ITB. He has been working in the area of maintenance since 1992. His expertise is in Reliability Centered Maintenance, Reliability Control Program, Maintenance Planning and Life Cycle Costing. He has conducted various research in those area at GMF AeroAsia, Royal Dutch Airlines (KLM), Nusantara Turbine and Propulsion (PT NTP) and Indonesian Aerospace Company (IAe). He involves also in various projects in his research group. Mr. Edy Suwondo received his bachelor degree from the Aerospace Engineering ITB and his doctor degree from Aerospace Engineering, Delft University of Technology (TU Delft), The Netherlands. His doctor research was in the applications of Life Cycle Costing in maintenance area.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Elemen Mesin: Design, Maintenance And Troubleshooting (JAKARTA)

Jadwal Training

Elemen Mesin: Design, Maintenance And Troubleshooting (JAKARTA) TRAINING TIME :  14 Aug 2017-16 Aug 2017 18 Sep 2017-20 Sep 2017 16 Oct 2017-18 Oct 2017 ... Baca Selengkapnya

Elemen Mesin: Design, Maintenance And Troubleshooting (JAKARTA)

Jadwal Training

Elemen Mesin: Design, Maintenance And Troubleshooting (JAKARTA)

TRAINING TIME : 

  • 14 Aug 2017-16 Aug 2017
  • 18 Sep 2017-20 Sep 2017
  • 16 Oct 2017-18 Oct 2017
  • 13 Nov 2017-15 Nov 2017
  • 18 Dec 2017-20 Dec 2017

VENUE :   Jakarta( Hotel  Ibis Arcadia/Hotel Harris Tebet/Hotel  Oak Tree/Setiabudi Building 2)

TRAINING DURATION :   3 days

PENDAHULUAN:
Elemen mesin adalah bagian mesin yang melakukan tugas untuk Memenuhi tujuan tertentu bersifat dan bekerja secara mekanik. Tugas dan fungsi elemen mesin adalah mendukung atau menahan elemen mesin lainnya bersifat statis dan atau mentransmisikan power dari sumber tenaga ke elemen lainnya bersifat dinamis. Elemen mesin yang Mendukung sebuah system mekanik bersifat dinamis antara lain: poros transmisi, bearing, roda gigi, chain, belt, rem, kopling, system pelumasan dll. Secara umum dalam pelatihan ini akan dibahas tentang besaran power, kecepatan dan besaran torsi yang dapat dipindahkan oleh sebuah system mekanik. Juga dibahas perawatan yang perlu dilakukan dalam system mekanik dan gangguan ataupun kegagalan yang paling sering terjadi dalam system mekanik. Disamping hal di atas juga akan didiskusikan tentang system pelumasan dalam elemen mesin, dan gangguan-gangguan yang mungkin terjadi, serta kegagalan dalam system pelumasan.

PESERTA TRAINING:
Peserta training adalah mereka yang mempunyai latar belakang pendidikan teknik, utamanya teknik mekanik, baik sarjana maupun pendidikan menengah kejuruan. Karyawan perusahaan yang menangani peralatan mekanik baik sebagai operator maupun sebagai tenaga perawatan dan perbaikan.

TUJUAN:
Setelah mengikuti training ini diharapkan peserta mampu:

  • Mampu menganalisis power, beban, torsi dan kecepatan yangda tiap elemen mesin.
  • Mampu menganalisis penyebab kegagalan dan cacat serta yang terjadi elemen mesin.
  • Memahami sistem pelumasan pada tiap elemen mesin.

CAKUPAN MATERI TRAINING:
1.    Pre test
2.    Elemen mesin
3.    Transmisi poros
4.    Gear transmission
5.    Planetary gear transmission
6.    Belt transmission
7.    Chain transmission
8.    Coupling transmission
9.    Bearing
10.    Lubricating system
11.    Maintenance transmisi mekanik
12.    Post test

METODE TRAINING:
1.    Studi kasus
2.    Ceramah
3.    diskusi

INSTRUCTOR :   Dr.Ir. Drs. Agus Edy Pramono, M.Sc. and Team

INVESTATION PRICE/ PERSON :     
1.    Rp 5.950.000/person (full fare)  or
2.    Rp 5.750.000/person (early bird, payment 1 week before training)  or
3.    Rp 5.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)
12.    Calculator

TRAINING INSTRUCTOR
Dr.Ir.Drs. Agus Edy Pramono, M.Sc. lahir di Madiun, 06 September 1959. Beliau lulusan doktor(S3) dari teknik metalurgi dan material universitas Indonesia, magister material science universitas Indonesia dan sarjana teknik mesin universitas Indonesia. Beliau dosen di jurusan teknik mesin Politeknik Negeri Jakarta. Selain di Politeknik Negeri Jakarta, Beliau juga dosen di teknik mesin universitas pancasila, dosen di teknik industri UPN Veteran Jakarta, dosen di teknik mesin politeknik gajah tunggal (patigat) Tangerang. Sudah lebih dari 20 tahun Beliau aktif sebagai Instruktur Training Industri (industrial training) bidang Teknik dan Manajemen Perawatan untuk industri atau perusahaan-perusahaan yang ada di Indonesia. Lebih dari 50 jenis dan variasi judul terkait bidang kompetensi Beliau yang pernah Beliau sampaikan di kelas training industri dengan peserta berasal dari banyak perusahaan di Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Analisa Ekonomi Makro (KELAS KHUSUS + YOGYAKARTA)

Jadwal Training

Analisa Ekonomi Makro Analisa dalam teori ekonomi memiliki sifat yang lebih menyeluruh / global. Ekonomi makro lebih memperhatikan pada tindakan konsumen secara keseluruhan, kegiatan keseluruhan ... Baca Selengkapnya

Analisa Ekonomi Makro (KELAS KHUSUS + YOGYAKARTA)

Jadwal Training

Analisa Ekonomi Makro

Analisa dalam teori ekonomi memiliki sifat yang lebih menyeluruh / global. Ekonomi makro lebih memperhatikan pada tindakan konsumen secara keseluruhan, kegiatan keseluruhan pengusaha dan perubahan keseluruhan kegiatan ekonomi.

Peristiwa dalam makro ekonomi muncul dari interaksi banyak individu yang mencoba memaksimalkan kemakmurannya. Karena variabel agregat adalah jumlah variabel-variabel yang mendeskripsikan keputusan-keputusan individu, studi makro ekonomi didasarkan pada landasan-landasan mikro ekonomi.

Meskipun ekonomi makro merupakan bidang pembelajaran yang luas, ada dua area penelitian yang menjadi ciri khas disiplin ini: kegiatan untuk mempelajari sebab dan akibat dari fluktuasi penerimaan negara jangka pendek (siklus bisnis), dan kegiatan untuk mempelajari faktor penentu dari pertumbuhan ekonomi jangka panjang (peningkatan pendapatan nasional).

Persoalan pokok dalam Perekonomian

  1. Pertumbuhan : perkembangan kegiatan dalam perekonomian yang menyebabkan barang dan jasa yang diproduksikan dalam masyarakat bertambah. (masalah dalam jangka panjang).
  2. Ketidakstabilan kegiatan ekonomi. Pendapatan nasional potensial, yaitu tingkat pendapatan nasional yang dicapai apabila tenaga kerja sepenuhnya digunakan.
  3. Pengangguran adalah suatu keadaan dimana seseorang yang tergologn dalam angkatan kerja ingin mendapatkan pekerjaan tetapi dapat memperolehnya
  4. Kenaikan harga-harga (inflasi) : suatu proses kenaikan harga-harga yang berelaku dalam suatu perekonomian.
  5. Neraca pembayaran : suatu ringkasan pembukuan yang menunjukkan aliran pembayaran yang dilakukan dari negara-negara lain ke dalam negeri, dan dari dalam negeri ke negara2 lain dalam satu tahun tertentu.

TUJUAN DAN MANFAAT PELATIHAN

Setelah mengikuti pelatihan ini, peserta diharapkan mampu untuk :

  1. Mengerti dan memahami peran kebijakan fiskal dalam kerangka perekonomian nasional
  2. Mengerti dan memahami pengaplikasian konsep dan perangkat analisa yang sesuai untuk mendukung analisa suatu kebijakan fiskal.
  3. Memahami konsep dan teori ekonomi makro;
  4. Memahami indikator-indikator ekonomi makro;
  5. Melakukan analisa pasar keuangan, pasar barang, dan Pengantar ke IS-LM
  6. Melakukan analisa pasar tenaga kerja;
  7. Melakukan analisa pasar keuangan, pasar barang, dan pasar tenaga kerja dalam implementasinya (analisis jangka pendek dan jangka panjang);
  8. Memahami kebijakan ekonomi makro (kebijakan fiskal, moneter, dan sektor riil).

MATERI / OUTLINE PELATIHAN

  1. Pengantar Teori Ekonomi Makro (macro economic)
  2. Konsep Ekonomi Makro (macro economic)
  3. Pengeluaran dan Pendapaatn
  4. Pengangguran
  5. Inflasi dan Deflasi
  6. Indikator Ekonomi Makro (macro economic)
  7. Model Ekonomi Makro
  8. Permintaan Agregat
  9. Penawaran Agregat
  10. IS-LM
  11. Pendekatan Analitik
  12. Pengantar ke Perekonomian Terbuka/Ekonomi Internasional
  13. Kebijakan Ekonomi Makro (macro economic)
  14. Permasalahan dalam Ekonomi Makro
  15. Studi kasus dan diskusi

JADWAL DAN INVESTASI PELATIHAN

  • Yogyakarta / Cavinton Hotel | Rp5.250.000/peserta | Rp6.300.000/peserta
  • Semarang / Ibis Simpang Lima Hotel | Rp5.900.000/peserta
  • Malang / Ibis Malang Hotel | Rp5.900.000/peserta
  • Solo / Ibis Solo Hotel | Rp5.900.000/peserta
  • Jakarta / Ibis Kemayoran Hotel | Rp7.000.000/peserta
  • Surabaya / Santika Hotel  | Rp7.000.000/peserta
  • Bandung / Serella Hotel | Rp7.000.000/peserta
  • Bali / Santika Hotel | Rp8.100.000/peserta
  • Batam / Nagoya Plaza Hotel | Rp8.100.000/peserta
  • Balikpapan / Ibis Hotel | Rp8.100.000/peserta
  • (non residential)

Alternative Tanggal :

  • 25-27 Juli 2017
  • 1-3 Agustus 2017
  • 8-10 Agustus 2017
  • 14-16 Agustus 2017
  • 22-24 Agustus 2017
  • 29-31 Agustus 2017
  • 5-7 September 2017
  • 12-14 September 2017
  • 18-20 September 2017
  • 26-28 September 2017
  • 3-5 Oktober 2017
  • 10-12 Oktober 2017
  • 17-19 Oktober 2017
  • 24-26 Oktober 2017
  • 31 Oktober – 2 November 2017
  • 7-9 November 2017
  • 14-16 November 2017
  • 21-23 November 2017
  • 28-30 November 2017
  • 5-7 Desember 2017
  • 12-14 Desember 2017
  • 19-21 Desember 2017
  • 27-29 Desember 2017

FASILITAS PELATIHAN

  1. Sertifikat Pelatihan (Certificate)
  2. Expert Instructure
  3. Meeting Room Hotel dengan Lunch dan 2 kali Coffe Break
  4. Exclusive Training kits dan Backpacks
  5. Modul Pelatihan Hard dan Softcopy
  6. USB Flashdisk
  7. Foto Group Soft & Hard Copy
  8. Souvenir
  9. Transportasi selama Pelatihan (bandara dan Penginapan Ke Lokasi Pelatihan).

METODE PELATIHAN

  • Presentasi
  • Diskusi  dan Tanya Jawab
  • Studi kasus
  • Brainstorming
  • Praktek

PESERTA PELATIHAN
Supply Chain/Logistik, Procurement/Purchasing, Komite Pembelian, General Affair, Administrasi Kontrak, Legal Perusahaan, Supervisor/Manager yang terlibat dalam proses pembelian  dengan pemasok.

INSTRUCTURE / FASILITATOR
Profile pembicara akan disertakan dalam undangan training

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing
Training Yogyakarta

Talent Management (KELAS KHUSUS + YOGYAKARTA)

Jadwal Training

Talent Management (KELAS KHUSUS + YOGYAKARTA) Sumber daya manusia merupakan unsur penting bagi perusahaan sebagai suatu kunci agar perusahaan dapat bersaing dengan kompetitornya. SDM yang ... Baca Selengkapnya

Talent Management (KELAS KHUSUS + YOGYAKARTA)

Jadwal Training

Training Yogyakarta

Talent Management (KELAS KHUSUS + YOGYAKARTA)

Sumber daya manusia merupakan unsur penting bagi perusahaan sebagai suatu kunci agar perusahaan dapat bersaing dengan kompetitornya. SDM yang berkompeten mampu menjadikan produk maupun jasa yang berkualitas unggulan dengan harga bersaing dan waktu distribusi yang cepat.

Oleh karenanya, perusahaan harus memiliki kemampuan dalam menciptakan SDM unggul sebelum ataupun untuk dapat menciptakan produk yang berdaya saing tinggi (berkualitas unggulan).

Talent Management dapat didefinisikan sebagai strategi menciptakan SDM yang berkualitas dan berdaya saing tinggi (berkompeten di bidangnya). Dimana talent management merupakan bentuk persaingan suatu perusahaan dengan perusahaan lainnya di dalam tingkat individual. Bila suatu perusahaan berhasil menciptakan dan mempertahankan sumber daya manusianya yang lebih unggul dari perusahaan pesaingnya, maka dapat dikatakan perusahaan tersebut dapat tetap bertahan dan terus berkembang di tengah persaingan global saat ini.

TUJUAN DAN MANFAAT PELATIHAN

Setelah mengikuti pelatihan ini, peserta diharapkan mampu untuk :

  1. Mengetahui dan memahami strategi pengelolaan sumber daya manusia dengan strategi atau prinsip talent manajemen guna mencapai keunggulan organisasi melalui human capital.
  2. Mengetahui dan memahami tahapan serta metode penerapan strategi mengidentifikasi dan mendapatkan sumber daya manusia dengan potensi tinggi dengan langkah pengembangan dan promosi ke posisi-posisi kunci organisasi.

MATERI / OUTLINE PELATIHAN

  • Konsep dan model pendekatan talent management
  • Faktor-Faktor yang mempengaruhi Talent Management
  • Tahapan dan Strategi menciptakan Talent Management
  • Strategi dan metode pengembangan Komponen-Komponen Pembentuk Talent Management
  • Pembinaan, Pelatihan, dan Pengembangan Sumber Daya Manusia
  • Memanfaatkan Kompensasi guna mengimplementasikan Rencana Talent        Management
  • Penggunaan Teknologi Informasi Untuk Mendukung Sistem Talent Management
  • Studi kasus

JADWAL DAN INVESTASI PELATIHAN

  • Yogyakarta / Cavinton Hotel | Rp5.250.000/peserta | Rp6.300.000/peserta
  • Semarang / Ibis Simpang Lima Hotel | Rp5.900.000/peserta
  • Malang / Ibis Malang Hotel | Rp5.900.000/peserta
  • Solo / Ibis Solo Hotel | Rp5.900.000/peserta
  • Jakarta / Ibis Kemayoran Hotel | Rp7.000.000/peserta
  • Surabaya / Santika Hotel  | Rp7.000.000/peserta
  • Bandung / Serella Hotel | Rp7.000.000/peserta
  • Bali / Santika Hotel | Rp8.100.000/peserta
  • Batam / Nagoya Plaza Hotel | Rp8.100.000/peserta
  • Balikpapan / Ibis Hoel | Rp8.100.000/peserta

(non residential)

Alternative Tanggal :

  • 18-20 Juli 2017
  • 25-27 Juli 2017
  • 1-3 Agustus 2017
  • 8-10 Agustus 2017
  • 14-16 Agustus 2017
  • 22-24 Agustus 2017
  • 29-31 Agustus 2017
  • 5-7 September 2017
  • 12-14 September 2017
  • 18-20 September 2017
  • 26-28 September 2017
  • 3-5 Oktober 2017
  • 10-12 Oktober 2017
  • 17-19 Oktober 2017
  • 24-26 Oktober 2017
  • 31 Oktober – 2 November 2017
  • 7-9 November 2017
  • 14-16 November 2017
  • 21-23 November 2017
  • 28-30 November 2017
  • 5-7 Desember 2017
  • 12-14 Desember 2017
  • 19-21 Desember 2017
  • 27-29 Desember 2017

FASILITAS PELATIHAN

  1. Sertifikat Pelatihan (Certificate)
  2. Expert Instructure
  3. Meeting Room Hotel dengan Lunch dan 2 kali Coffe Break
  4. Exclusive Training kits dan Backpacks
  5. Modul Pelatihan Hard dan Softcopy
  6. USB Flashdisk
  7. Foto Group Soft & Hard Copy
  8. Souvenir
  9. Transportasi selama Pelatihan (bandara dan Penginapan Ke Lokasi Pelatihan).

PESERTA PELATIHAN
Human Resource, Human Capital dan Line Staff/Supervisors/Managers yang terlibat dalam pengembangan SDM. Para eksekutif dan manajer unit bisnis strategis.

METODE PELATIHAN

  • Diskusi  dan Tanya Jawab
  • Studi kasus
  • Brainstorming
  • Praktek

INSTRUCTURE / FASILITATOR
Dr. Ayi Tejaningrum,SE.,MT.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Warehouse KPI (KELAS KHUSUS + YOGYAKARTA)

Jadwal Training

Warehouse KPI Dalam proses analisa misi dan penetapan sasaran, maka perusahaan membutuhkan indikator yang mampu mengukur tercapainya sasaran yang telah ditetapkan. Oleh karenanya, suatu perusahaan, ... Baca Selengkapnya

Warehouse KPI (KELAS KHUSUS + YOGYAKARTA)

Jadwal Training

Warehouse KPI

Dalam proses analisa misi dan penetapan sasaran, maka perusahaan membutuhkan indikator yang mampu mengukur tercapainya sasaran yang telah ditetapkan. Oleh karenanya, suatu perusahaan, divisi ataupun departemen dikatakan perlu untuk melakukan pengembangan terhadap indikator-indikator yang mampu mengukur sejauh mana suatu sasaran masih harus ditempuh serta mengindikasikan perkembangan organisasi.

Pelatihan ini didesain untuk memberikan pemahaman kepada peserta terkait, teori, konsep dan strategi dalam melakukan pengembangan KPI yang sesuai dengan organisasinya. Peserta juga akan dibekali dengan aplikasi software MS-Excel yang berguna untuk melakukan pemantauan terhadap perkembangan KPI di organisasinya.

TUJUAN DAN MANFAAT PELATIHAN
Setelah mengikuti pelatihan ini, peserta diharapkan mampu untuk :

  1. Mengetahui dan memahami kerangka kerja performance management yang meliputi hubungan antara Pengelolaan Sasaran Organisasi (Corporate Mision) dengan Key Performance indicator (KPI)
  2. Melakukan identifikasi dan pengembangan KPI di ruang lingkup warehouse
  3. Memahami proses identifikasi improvement area yang perlu menjadi prioritas.
  4. Melakukan analisa pengembangan strategi peningkatan.
  5. Meningkatkan problem solving terkait dengan warehouse KPI

MATERI PELATIHAN

  1. Warehouse yang Efektif & Efisien
  2. Hubungan antara Warehouse dengan Logistic
  3. Aktivitas Utama Warehouse
  4. Konsep Pengembangan Performa Warehouse
  5. Fundamental Business Process Warehouse
  6. Pengembangan KPI berbasis Warehouse Business Process
  7. KPI yang umum untuk Warehouse
  8. Teknik Pengendalian KPI Warehouse
  9. Aplikasi Dashboarding Warehouse KPI berbasis Ms-Excel
  10. Studi kasus dan diskusi

JADWAL DAN INVESTASI PELATIHAN

  • Yogyakarta / Cavinton Hotel | Rp5.250.000/peserta | Rp6.300.000/peserta
  • Semarang / Ibis Simpang Lima Hotel | Rp5.900.000/peserta
  • Malang / Ibis Malang Hotel | Rp5.900.000/peserta
  • Solo / Ibis Solo Hotel | Rp5.900.000/peserta
  • Jakarta / Ibis Kemayoran Hotel | Rp7.000.000/peserta
  • Surabaya / Santika Hotel  | Rp7.000.000/peserta
  • Bandung / Serella Hotel | Rp7.000.000/peserta
  • Bali / Santika Hotel | Rp8.100.000/peserta
  • Batam / Nagoya Plaza Hotel | Rp8.100.000/peserta
  • Balikpapan / Ibis Hotel | Rp8.100.000/peserta
  • (non residential)

Alternative Tanggal :

  • 18-20 Juli 2017
  • 25-27 Juli 2017
  • 1-3 Agustus 2017
  • 8-10 Agustus 2017
  • 14-16 Agustus 2017
  • 22-24 Agustus 2017
  • 29-31 Agustus 2017
  • 5-7 September 2017
  • 12-14 September 2017
  • 18-20 September 2017
  • 26-28 September 2017
  • 3-5 Oktober 2017
  • 10-12 Oktober 2017
  • 17-19 Oktober 2017
  • 24-26 Oktober 2017
  • 31 Oktober – 2 November 2017
  • 7-9 November 2017
  • 14-16 November 2017
  • 21-23 November 2017
  • 28-30 November 2017
  • 5-7 Desember 2017
  • 12-14 Desember 2017
  • 19-21 Desember 2017
  • 27-29 Desember 2017

FASILITAS PELATIHAN

  1. Sertifikat Pelatihan (Certificate)
  2. Expert Instructure
  3. Meeting Room Hotel dengan Lunch dan 2 kali Coffe Break
  4. Exclusive Training kits dan Backpacks
  5. Modul Pelatihan Hard dan Softcopy
  6. USB Flashdisk
  7. Foto Group Soft & Hard Copy
  8. Souvenir
  9. Transportasi selama Pelatihan (bandara dan Penginapan Ke Lokasi Pelatihan).

Metode Pelatihan

  • Presentasi
  • Diskusi  dan Tanya Jawab
  • Studi kasus
  • Brainstorming
  • Praktek

PESERTA PELATIHAN
Manajer Divisi, Manajer Department ataupun ataupun key personel dari management team.

INSTRUCTURE / FASILITATOR
Patisina, ST., M.Eng and team

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Vibration Monitoring & Control System (BANDUNG)

Jadwal Training

Vibration Monitoring & Control System (BANDUNG) Tanggal 14 Aug 2017-16 Aug 2017 13 Sep 2017-15 Sep 2017 11 Oct 2017-13 Oct 2017 08 Nov 2017-10 ... Baca Selengkapnya

Vibration Monitoring & Control System (BANDUNG)

Jadwal Training

Vibration Monitoring & Control System (BANDUNG)

Tanggal

  • 14 Aug 2017-16 Aug 2017
  • 13 Sep 2017-15 Sep 2017
  • 11 Oct 2017-13 Oct 2017
  • 08 Nov 2017-10 Nov 2017
  • 27 Dec 2017-29 Dec 2017

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

INVESTATION PRICE/PERSON :

  1. Rp 6.500.000/person (full fare)  or
  2. Rp 6.250.000/person (early bird, payment 1 week before training) or
  3. Rp 5.950.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Tas
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INTRODUCTION :
Vibration is the most problem we found in rotating instrument. This course will lead participant to understand vibration phenomena and caracteristic . vibration spectrum also can inform that some problem generating in the the equipment.
After the course participant will :

  1. Have a good basic of mechanical vibration
  2. Ability to interprete case vibration in their rotating equipment
  3. Ability to select probe of vibration

TRAINING MATERIAL OUTLINE :

  1. Fundamental vibration
  2. Vibration measurement and instrument
  3. Vibration standard
  4. vibration phenomena :
    • Unbalance
    • Misalignment
    • Resonance
    • Gear meshfrequence
    • Bearing vibration and analysis
  5. Vibration and trouble shooting
  6. Vibration in gas turbine engine
  7. Vibration in pump and compressor

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2026

Info Seminar | Jadwal Seminar