Jadwal Training 2024

Pressure Safety Valve : Selection And Sizing (BANDUNG)

 

Pressure Safety Valve : Selection And Sizing (BANDUNG)

Tanggal

03 Sep 2018-05 Sep 2018
29 Oct 2018-31 Oct 2018
05 Nov 2018-07 Nov 2018
26 Dec 2018-28 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING  OBJECTIVES:
The function of a pressure safety valve is to protect pressure vessels, piping systems, exchanger, boiler and other equipment from pressures exceeding their design pressure by more that a fixed predetermined amount. The permissible amount of overpressure is covered by various codes and is a function of the type of equipment and the conditions causing the overpressure. Failure of safety valve can cause cathastropic accident. Periodically inspection, testing and repair is one of the most important element that the safety valve work properly.This course explains how safety valve and relief functions and how to maintains and ensure long life operation.

TRAINING MATERIAL OUTLINE :

  1. PSV type and application
  2. Recognize manufacture type and size
  3. Operation, performance and opening characteristic .
  4. Recognizing, part, component and materials
  5. Assembly
  6. PSV degradation material
  7. Painting and surface preparation
  8. Periodic checking, testing and readjusting

WHO SHOULD ATTEND THIS TRAINING?:
This course is designed for  technicians who use, select, install and service of pressure safety valve or everyone who want to know this topic.

TRAINING DURATION :  3 hari

INVESTATION PRICE/PERSON :    

  1. Rp.5.950.000/person (full fare) or
  2. Rp. 5.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 5.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Budi Lukman Hakim,MT. lulusan dari  teknik mesin ITB dengan konsentrasi di teknik material. Beliau memiliki pengalaman praktis seperti menjadi Engineering Adviser & Business Development, Project Manager/ Focal Point, Engineering & Business Development Manager, QA/QC Manager, Turbocharger Gas Turbine maintenance and Oob Wheel Assembly Fabrication di ConocoPhillips Indonesia, Valve Maintenance and Repair Service di ConocoPhillips Indonesia, Electrical & Instrument Maintenance service Project at BP LNG Tangguh, Valves Maintenance & management service Project STC 0136 & 0265 at west java offshore, Darajat Unit III Power Plant & Steamfield Geothermal Project, Suban Phase 2 Gas Project Conoco Phillips, LPG & Sulfur Recovery Pertamina Cilacap Project, Balongan Blue Sky Project, Mechanical Valves Partnering di chevron pacific Indonesia, Piping Instalations & maintenance for Shutdown project – Pertamina UP II Dumai, Maintenance of Piping Installations in South Sumtera (Grissik), dll, Beliau juga mengajar sebagai dosen di kampus swasta di jawa barat. Pengalaman praktis beliau akan didiskusikan dengan peserta training di kelas-kelas training Beliau.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Installation, Maintenance And Troubleshooting Of Gas Compressor And Piping System (JAKARTA)

 

Installation, Maintenance And Troubleshooting Of Gas Compressor And Piping System (JAKARTA)

TRAINING TIME : 

  • 24 Jul 2017-26 Jul 2017
  • 21 Aug 2017-23 Aug 2017
  • 25 Sep 2017-27 Sep 2017
  • 23 Oct 2017-25 Oct 2017
  • 20 Nov 2017-22 Nov 2017
  • 27 Dec 2017-29 Dec 2017

VENUE :   Jakarta( Hotel  Ibis Arcadia/Hotel Harris Tebet/Hotel  Oak Tree/Setiabudi Building 2)

TRAINING DURATION :   3 days

PENDAHULUAN:
Kompresor merupakan salah satu peralatan penting dalam industri, jika dilihat fungsinya yang paling sederhana dalam industri kompresor berfungsi untuk membersihkan komponen dengan tiupan udara bersih dan kering, dalam hal ini tentu saja kompresor udara. Dalam industri kimia dan gas serta industri perminyakan, kompresor dapat berfungsi lebih luas lagi, misalnya sebagai pemindah, pengirim bahan-bahan bersifat gas. Lebih luas lagi juga dapat berfungsi sebagai fluid power dalam system kontrol pneumatic. Dengan power yang konstan kompresor dapat menghasilkan tekanan sekaligus juga aliran gas atau udara, yang proporsional artinya bila diinginkan aliran besar maka tentu saja tekanannya akan turun, demikian juga sebaliknya. Tentu saja banyak factor yang saling mempengaruhi misalnya temperatur lingkungan, temperatur gas atau udara yang dikompres (dimampatkan). Dalam hal inilah, dalam training ini akan dibahas tentang apa itu kompresor, bagaimana cara kerjanya, mengoperasikanya, memeliharanya, merawatnya, dan lebih penting lagi instalasinya dengan system perpipaan.

PESERTA :
Diharapkan mempunyai latar belakang pendidikan teknik yang sesuai, minimum lulusan SMK (dari jurusan mesin). Karyawan industri dengan latar belakang pekerjaan yang sesuai dengan judul pelatihan diatas.

TUJUAN:
Setelah selesai pelatihan, peserta diharapkan mampu :

  • Mempertimbangkan pilihan peralatan, system dan perlengkapan serta instalasi yang sesuai dengan pertimbangan dan persyaratan yang ada dilapangan.
  • Memahami cara-cara pengoperasian peralatan sesuai dengan pertimbangan desain dan pemeliharaan peralatan yang bersangkutan.
  • Menemukan dan menganalisis kemungkinan-kemungkinan penyebab terjadinya gangguan dalam peralatan maupun instalasi sistem.
  • Menentukan tindakan-tindakan pemeliharaan dan perawatan terhadap peralatan bila kemungkinan terjadi gangguan.

CAKUPAN MATERI TRAINING:
1.    Pre test
2.    Klasifikasi kompresor
3.    Centrifugal compressor
4.    Screw compressor (screw)
5.    Basic analysis of gas compress
6.    Kalkulasi tekanan dan kapasitas
7.    Recommendation maintenance and inspection
8.    Installation and operation – compressor
9.    Design and lay out pipa udara
10.    Analisa tek, kap dan tem pipa udara
11.    Pemilihan material pipa gas
12.    Maintenance instalasi pipa gas
13.    Pipe lining, equipment and safety valve

METODE TRAINING:
1.    Studi kasus
2.    Ceramah
3.    diskusi

INSTRUCTOR :   Dr.Ir. Drs. Agus Edy Pramono, M.Sc. and Team

INVESTATION PRICE/ PERSON :     
1.    Rp 5.950.000/person (full fare)  or
2.    Rp 5.750.000/person (early bird, payment 1 week before training)  or
3.    Rp 5.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)
12.    Calculator

TRAINING INSTRUCTOR
Dr.Ir.Drs. Agus Edy Pramono, M.Sc. lahir di Madiun, 06 September 1959. Beliau lulusan doktor(S3) dari teknik metalurgi dan material universitas Indonesia, magister material science universitas Indonesia dan sarjana teknik mesin universitas Indonesia. Beliau dosen di jurusan teknik mesin Politeknik Negeri Jakarta. Selain di Politeknik Negeri Jakarta, Beliau juga dosen di teknik mesin universitas pancasila, dosen di teknik industri UPN Veteran Jakarta, dosen di teknik mesin politeknik gajah tunggal (patigat) Tangerang. Sudah lebih dari 20 tahun Beliau aktif sebagai Instruktur Training Industri (industrial training) bidang Teknik dan Manajemen Perawatan untuk industri atau perusahaan-perusahaan yang ada di Indonesia. Lebih dari 50 jenis dan variasi judul terkait bidang kompetensi Beliau yang pernah Beliau sampaikan di kelas training industri dengan peserta berasal dari banyak perusahaan di Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas, Oil and Water Pipeline Design And Maintenance (BANDUNG)

 

Gas, Oil and Water Pipeline Design And Maintenance (BANDUNG)

Tanggal

  • 26 Jul 2016-29 Jul 2016
  • 01 Aug 2016-04 Aug 2016
  • 13 Sep 2016-16 Sep 2016
  • 10 Oct 2016-13 Oct 2016
  • 31 Oct 2016-03 Nov 2016
  • 05 Dec 2016-08 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
To fulfill the oil and gas demand for power generation, recovery processes, and other uses, pipelines are utilized to transport the supply from their source.  These pipelines are mostly buried and operate without disturbing normal pursuits.

Construction procedures for most pipeline systems can be adapted to consider specific environmental conditions and are tailored to cause minimal impact on the environment.

Unattended pumping stations move large volumes of oil and petroleum products under high pressure.  Many factors have to be considered in the engineering and design of long-distance pipelines, including the nature and volume of fluid to be transported, the length of pipeline, the types of terrain traversed and the environmental constraints.  Major factor influencing pipeline system design are: Fluid properties, design condition, supply and demand magnitude/location, Code and standards, Route, topography and access, environmental impact, economic, hydrological impact, seismic and volcanic impacts.

To obtain optimum results for a pipeline transmission system, complex economic and engineering studies are necessary to decide on the pipeline diameter, material, compression/pumping power requirements and location of the pipeline route.

TRAINING MATERIAL OUTLINE :

  1. Overview of Problems in Gas, Oil and Produced Water Pipeline Operations and Maintenance
  2. The Pipeline Design Approach and Considerations
  3. Design of Gas Transmission Pipeline
  4. Design of Crude, Oil and Produced Water Transportation Pipeline
  5. Valves, Flanges and Fittings Selection for Crude, Oil, Gas and Produced Water Pipeline Design

INVESTATION PRICE/PERSON :

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Bag
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Internal And External Corrorion Control And Monitoring For Pipeline And Surface Facility (BANDUNG)

 

Internal And External Corrorion Control And Monitoring For Pipeline And Surface Facility (BANDUNG)

Tanggal

  • 19 Jul 2016-22 Jul 2016
  • 08 Aug 2016-11 Aug 2016
  • 19 Sep 2016-22 Sep 2016
  • 17 Oct 2016-20 Oct 2016
  • 07 Nov 2016-10 Nov 2016
  • 13 Dec 2016-16 Dec 2016

Tempat Pelaksanaan:
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
This course focuses on corrosion – from either internal or external source – and its potential problem, and the protection methods to stop or control them. Review on corrosion and technique by which it can be identified, monitored and controlled will be given in detail. Active participation is encouraged through case studies and examples especially on the use of painting and coatings, transformer-rectifier of impressed current, magnesium, zinc and alum sacrificial anodes for external protection, and the injection of corrosion inhibitors and biocides for internal corrosion control.

PRE-REQUISITE :
NONE. No previous training in corrosion control is required. However, to gain the most from this course, a basic understanding of physics, chemistry and basic unit operations will be helpful.

TRAINING MATERIAL OUTLINE :

  1. Review of oil & gas surface production facility and operations.
  2. Review of metallic materials used in surface production facility and pipelines and the corrosion problem usually happen.
  3. Case studies and examples of oil & gas material failure caused by corrosion from internal and external source.
  4. Uniform, galvanic and localized corrosion failures.
  5. Internal corrosion of pipeline, vessel and processing equipment caused by sour component, H2S, CO2, organic acid, brine, and the SRB (sulfate reducing bacteria).
  6. External corrosion of underground, underwater and under-seawater pipeline and structure caused by impurities in soil and water environment.
  7. External corrosion of topside structure caused by marine atmosphere.
  8. Basic electrochemistry of corrosion process, Ohm’s law and the corrosion rate.
  9. Corrosion control and prevention with painting & coatings and the cathodic protection.
  10. Measurement of corrosion potential and corrosion current.
  11. Protection with sacrificial anode and impressed current.
  12. Understanding NACE Standard RP-01-69 to stop external corrosion attack.
  13. Requirement, design and criteria of cathodic protection.
  14. Sacrificial anode specification, installation and construction.
  15. Testing, monitoring, and inspection of cathodic protection.
  16. Inspection and maintenance of transformer-rectifier and sacrificial anode.
  17. Field test, measurement techniques and instrument.
  18. Data recording and evaluation of cathodic protection system.
  19. Case studies of corrosion control and prevention with cathodic protection.
  20. Internal corrosion problem in the pipeline and surface facility.
  21. Oil/gas/water fluid properties and the corrosion tendency.
  22. Deterioration by H2S, CO2, and acidic corrosive components.
  23. Pipeline leakage and rupture by microbial induced corrosion.
  24. Corrosion caused by SRB and the pitting mechanism.
  25. Corrosion caused by oxygen penetration.
  26. Examples and case studies of equipment corrosion damage and pipeline leakage.
  27. Understanding NACE Standard RP-0775 for internal corrosion control and monitoring.
  28. Practical internal corrosion monitoring methods.
  29. Access fittings, corrosion coupon and corrosion probes.
  30. Practical internal corrosion control and prevention methods.
  31. Internal corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals.
  32. Dosage and injection methods of corrosion inhibitors.
  33. SRB control with biocides and the selection of suitable and low risk biocide formula.
  34. Dosage and injection methods of biocides.
  35. Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger chemicals.
  36. Dosage and injection methods of oxygen scavenger.
  37. Safety in the use of chemicals for internal corrosion prevention.
  38. Review of gas dehydration process and operations.
  39. Internal corrosion problem in glycol contactor (dehydration) unit.
  40. Method and materials use to control the corrosiveness of rich glycol solution.
  41. Review of amine sweetening process and operations.
  42. Internal corrosion problem in amine sweetening unit.
  43. Method and materials use to control the corrosiveness of rich amine solution.
  44. Examples and case studies of internal corrosion control

WHO SHOULD ATTEND THIS TRAINING?:

  1. Anyone who needs to recognize corrosion and understand its devastating potential, especially as it relates to his or her area of responsibility, in oil and gas surface production facility and pipelines.
  2. Anyone involved in combating and controlling corrosion from internal and external source.
  3. Technicians and field operators and engineers of any discipline.
  4. Onshore / offshore facility and pipeline cathodic protection inspectors.
  5. Onshore / offshore structure painting and coating applicators and inspectors.
  6. Amine sweetening, glycol dehydration and gas processing plant operators.
  7. Beginners who interested in.

TRAINING DURATION : 4 days

INVESTATION PRICE/PERSON :

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pipeline Internal Corrosion Control And Monitoring (BANDUNG)

 

Pipeline Internal Corrosion Control And Monitoring (BANDUNG)

Tanggal

  • 26 Jul 2016-29 Jul 2016
  • 01 Aug 2016-04 Aug 2016
  • 13 Sep 2016-16 Sep 2016
  • 10 Oct 2016-13 Oct 2016
  • 14 Nov 2016-17 Nov 2016
  • 19 Dec 2016-22 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Jam Pelaksanaan
08:30-16:30 WIB

Pembicara / Fasilitator
Hilman Ahmad, PhD., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

INVESTATION PRICE/PERSON :

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

TRAINING DESCRIPTION AND BENEFITS :

  1. This course is for either corrosion engineers or non corrosion engineering personnel who involve in oil & gas operations and maintenance, pipeline and asset integrity management, pipeline inspection and pigging, material purchasing, chemical selection and injection, hazard and HSE management, and any corrosion related activity.
  2. By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more detail about internal corrosion control and monitoring, and understand how to select and use of corrosion inhibitors and chemicals.
  3. After completion of this course, participants will understand what internal corrosion is, how to detect, predict and monitor their growth, and how to control these serious problems in the pipeline.

TRAINING HIGHLIGHTS :

  1. Internal Corrosion Problem in the Pipeline
  2. H2S, CO2, and Acidic Corrosive Components
  3. Sour Corrosion and Microbial Induced Corrosion
  4. Equipment and Pipeline Leakage and Rupture by Corrosion
  5. Fluid Properties and the Corrosion Tendency
  6. Internal Corrosion Monitoring and Corrosion Prediction
  7. Internal Corrosion Control and Prevention Methods

TRAINING MATERIAL OUTLINE :

  1. Oil, condensate, gas, and water flowing in the pipeline
  2. Corrosion in water re-injection system and the injection line
  3. Corrosion in sea water injection system
  4. The role of H2S, CO2, and acidic impurities in the fluid
  5. Nature of H2S corrosion, pitting and stress corrosion cracking
  6. Nature of CO2 corrosion
  7. Sour corrosion and top of line corrosion problems
  8. Microbial induced corrosion mechanism and its related problems
  9. Corrosion caused by SRB and the pitting mechanism
  10. Corrosion caused by oxygen penetration
  11. Examples of corrosion damage and pipeline leakage
  12. Corrosion monitoring methods in oil & gas field
  13. Oil & gas filed corrosion prevention methods
  14. Corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals
  15. Dosage and injection methods of corrosion inhibitors
  16. SRB control with biocides and the selection of suitable and low risk biocide formula
  17. Dosage and injection methods of biocides
  18. Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger
  19. Dosage and injection methods of oxygen scavenger
  20. Safety in oil & gas corrosion prevention

TRAINING METHOD, MATERIALS AND PROGRAM

  1. The course will be delivered in the form of classroom exposition, case studies and open discussion. Course materials will be handed out as hard and soft copy.
  2. The course will be given in Bahasa Indonesia. In special case, upon request, it will be in English.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

VALVE (BANDUNG)

Jadwal Training

VALVE (BANDUNG) Tanggal 21 Jun 2016-24 Jun 2016 26 Jul 2016-29 Jul 2016 09 Aug 2016-12 Aug 2016 27 Sep 2016-30 Sep 2016 25 Oct ... Baca Selengkapnya

VALVE (BANDUNG)

 

VALVE (BANDUNG)

Tanggal

  • 21 Jun 2016-24 Jun 2016
  • 26 Jul 2016-29 Jul 2016
  • 09 Aug 2016-12 Aug 2016
  • 27 Sep 2016-30 Sep 2016
  • 25 Oct 2016-28 Oct 2016
  • 08 Nov 2016-11 Nov 2016
  • 13 Dec 2016-16 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

WHO SHOULD ATTEND THIS TRAINING? :

  1. Mechanical, Rotating, Construction, and Project Engineers
  2. Operators, Technicians, Maintenance Personnel who involved in installation, testing, and maintenance of valve system
  3. Experienced professionals who want to refresh or broaden their knowledge of valve system

WHAT BENEFITS DO YOU GET FROM THIS TRAINING? :

  • Sound understanding of valve components and functions
  • Significantly improve your understanding of valve system
  • Develop troubleshooting skills, testing, repairs and maintenance know-how
  • Proper understanding of valve system

TRAINING MATERIAL OUTLINE :

  1. Fluid flow
    • Fluid type
    • Fluid characteristics
    • Flow condition
    • General equation in piping sysytem
    • Pressure drop determmination
  2. Process and piping diagram
    • Process flow diagram
    • Equipmqnt arrangement diagram
    • Piping and instrument diagram
    • Piping and equipment isometric diagram
  3. Valve introduction
    • Manual valves
    • Check valves
    • Pressure relief valves
    • Rupture disk
    • Identification of valves size and pressure class
    • Standar
  4. Fluid tightness of valves
  5. Sealing mechanism
  6. Valve seating
  7. Manual valves
    • Function
    • Grouping of valves
    • Seletion of valves
    • Type of valve and function
  8. Check valves
  9. Pressure relief valves
    • Selection
    • Sizing of relief device
    • Installation
  10. Material and construction
  11. Valve standar
  12. Valve characteristics

TRAINING DURATION : 4 hari

INVESTATION PRICE/PERSON :

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balongan pertamina, PT. Indocement, some PLTA, some hotels, PT.Pupuk Kujang, PT.Bio Farma, BPPT, PT. Bintang Agung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

QC for Water Network (Pipeline) Construction and Related Civil Work Training (BANDUNG)

 

QC for Water Network (Pipeline) Construction and Related Civil Work Training (BANDUNG)

TRAINING OBJECTIVES :
To introduce pipeline construction quality management plan so that the training participant will able to control, inspect, and monitor the all pipeline construction phases so that pipeline later on can be operated later safely and reliably
TRAINING MATERIAL OUTLINE :

  1. Review Design Codeand Construction Quality Plan

(Material Selection, Hydraulics and Pump, Pressure and Pipeline Thickness Calculation, Corrosion Protection – Coating and Cathodic Protection Calculation)

  1. Pipeline Pre-Construction QA and QC Plan

(Construction Specification, Land Preparation, Excavation and Trenching, Ground Works, Ditching, and Safety Factors)

  1. Pipeline Construction

(Pipeline Welding, Pipeline Laying, Pipe Lowering and Stress Analysis, Cathodic Protection Installation, Field Joint Coating)

  1. Pipeline Post Construction (and Commissioning) QC and QA Implementation

(NDT – Ultrasonic, Radiography, Holiday Test, and Hydrotest, and Backfilling and Cleaning Up, Handing Over, and Operating & Maintenance Manual)

Applicable International Standard Codes

  1. American Society for Mechanical Engineer (ASME)
  • ASME B31.4, Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids
  1. American Water Works Association (AWWA)
  • AWWA C150-93, Standard for thickness design ductile iron
  • AWWA C200 -97, Standard for steel water pipe 6 in (150mm) and larger
  • AWWA C206-97, Standard for Field Welding of Steel Water Pipe
  • AWWA C600-93, Standard for Installation of Ductile Iron Water Main and Their Appurtenances

WHO SHOULD ATTEND THIS TRAINING? :
Field Technicians, Inspectors, and Engineers.

INSTRUCTOR :   Dr. Ahmad Taufik, M.Eng.and Team

VENUE :Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION :3 days

TRAINING TIME :

  • 16 Dec 2015-18 Dec 2015
  • 06 Jan 2016-08 Jan 2016
  • 03 Feb 2016-05 Feb 2016
  • 22 Mar 2016-24 Mar 2016
  • 06 Apr 2016-08 Apr 2016
  • 04 May 2016-06 May 2016
  • 01 Jun 2016-03 Jun 2016
  • 18 Jul 2016-20 Jul 2016
  • 31 Aug 2016-02 Sep 2016
  • 07 Sep 2016-09 Sep 2016
  • 05 Oct 2016-07 Oct 2016
  • 30 Nov 2016-02 Dec 2016
  • 27 Dec 2016-29 Dec 2016

INVESTMENT PRICE/PERSON :

  1. Rp. 6.950.000/person (full fare) or
  2. Rp. 6.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 6.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreakeveryday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Dr.AhmadTaufik,M.Eng.is Risk and Integrity Specialist, and  Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses.He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager, at PT. MMS, PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufikis an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity  research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Centrifugal Compressor Performance & Condition Evaluation (YOGYAKARTA)

 

Centrifugal Compressor Performance & Condition Evaluation (YOGYAKARTA)

TRAINING TIME :  

  • 06 Jul 2015-09 Jul 2015
  • 24 Aug 2015-27 Aug 2015
  • 01 Sep 2015-04 Sep 2015
  • 05 Oct 2015-08 Oct 2015
  • 10 Nov 2015-13 Nov 2015
  • 14 Dec 2015-17 Dec 2015

VENUE :   Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

TRAINING DURATION :    4 days

TRAINING DESCRIPTION:
The degree to which compressors are maintained today ranges from “wait until destruction” to a “complete” but extravagant program. This seminar presents maintenance strategies that are economical and yet assure required compressor availability. Participants review the fundamentals of compressors and the techniques for maintaining them. Participants examine proper methods of parts repair techniques as well as diagnostic tests for identifying and determining problems. Participants will study in depth preventive maintenance programs including the purpose of such programs and their planning and implementation. The seminar will introduce new concepts and approaches through actual case studies, which will enable you to successfully implement new ideas.

WHO SHOULD ATTEND THIS TRAINING?:
This course is designed for plant and maintenance engineers, maintenance managers and supervisors and compressor specialists. It should be valuable to senior maintenance mechanics and those who are involved with compressors, their operation and their maintenance.

TRAINING MATERIAL OUTLINE:
1.    Compressor Types
a.    Centrifugal
b.    Helical screw
c.    Reciprocating
d.    Application ranges
e.    Application ranges
f.    Short cut selection methods

2.    Turbo compressor Maintenance
a.    Overview of alignment methods
b.    Predictive versus preventive strategies
c.    Run-length extension surveys
d.    Machinery turnaround planning

3.    Reciprocating Compressor Operation
a.    Lubrication systems
b.    Valves, valve problems and rebuilding
c.    Packing and packing problems
d.    Controls and cooling systems

4.    Saving Compressor Air Cost While Increasing Efficiency
a.    The impact of artificial demand
b.    Today’s compressor control
c.    Realistic leak management
d.    Stabilizing a compressed air system
e.    Compressed air dryers

5.    Reciprocating Compressor Preventive Maintenance
a.    Types of maintenance programs
b.    Purpose of preventive maintenance
c.    Inspection and inspection forms
d.    Vendor and contractor requirements
e.    Planning and implementation

6.    Overhaul and Repair of Reciprocating Compressors
a.    Methods of repair and overhaul
b.    Alignment and piston rod run out
c.    Foundation problems and repair
d.    Component repair and rebuilding

7.    Troubleshooting Compressor Problems
a.    Basic approaches to compressor troubleshooting
b.    Typical problems and solutions
c.    Diagnostic test
d.    Examples from recent failure incidents

INSTRUCTOR :   Dr.Ir. Paryana Puspaputra, M.Eng., and Team

INVESTATION PRICE/PERSON :     
1.    Rp 7.950.000/person (full fare)  or
2.    Rp 7.750.000/person (early bird, payment 1 week before training)  or
3.    Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

ESP – Electrical Submersible Pump Design, Operation And Troubleshooting (Yogyakarta)

 

ESP – Electrical Submersible Pump Design, Operation And Troubleshooting (Yogyakarta)

Tanggal   
11-13 Agustus 2014
8-10 September 2014
6-8 Oktober 2014
10-12 November 2014
8-10 Desember 2014

Jam Pelaksanaan    
08:00-16:00 wib

Tempat  
Hotel Ibis Style Yogyakarta
Hotel Horisson Ultima Riss Yogyakarta
Hotel Grand Zurry Yogyakarta
Hotel Jambuluwuk Yogyakarta
dan Hotel-hotel berbintang di Yogyakarta

Pembicara / Fasilitator    
Tugino, ST, MT dan Team
(Akademisi alumnus UGM, Trainer, Konsultan dalam bidang Electrical Engineering, yang telah berpengalaman dalam menangani berbagai judul, program dan permasalahan dalam bidang electrical, baik pada perusahaan BUMN, swasta lokal, nasional maupun multinasional; menjadi Tim Assessor dan asosiasi profesi electrical, serta mempunyai jam terbang hingga luar negeri, seperti di Australia, Thailand, Taiwan, Malaysia dan Singapura).

Harga     
Rp. 7.500.000,-
Tidak Termasuk Akomodasi dan Penginapan
Sudah termasuk Makan siang, Coffee Break 2x, Training Kits, Modul Pelatihan dan Sertifikat

DESKRIPSI
Dengan makin meningkatnya kebutuhan pemasangan ESP pada sumur – sumur untuk menggantikan Gaslift system, karena makin sedikitnya persediaan gas di lapangan, maka operation personel memerlukan pengetahuan yang jelas tentang aspek-aspek operasi, pemilihan dan troubleshooting ESP.

Pelatihan ini untuk memberi bekal kepada para peserta untuk dapat meningkatkan kemampuan dalam mengoperasikan, perencanaan, dan kontrak ESP agar dapat melaksanakan tugasnya dengan secara maksimal dan efisien.

MATERI:

  1. Dasar-dasar teknik produksi
    Aliran produksi di dalam sumur, productivity index, kemampuan produksi sumur, bubble point pressure, formation volume factor, macam-macam reservoir, problem– problem produksi sumur.
  2. Aliran minyak dari sumur ke separator
    Pengertian tentang head, pressure loss sepanjang aliran, hydraulic horse power, total dynamic head, back pressure dan system pressure.
  3. Tentang ESP
    Macam-macam instalasi ESP, peralatan bawah tanah dan atas tanah, pump curve, type dan series motor, pompa, protector, konstruksi serta cara kerja peralatan , kekuatan dan jenis material.
  4. Design pompa
    Produksi optimum yang diharapkan, Vogel’s curve, pemilihan peralatan bawah tanah dan atas tanah disesuaikan kondisi sumur, masa depan kondisi sumur dan pemilihan ESP nya.
  5. Pemasangan ESP disumur
    Cara-cara pengecekan peralatan , running dan pulling procedure, cable splicing, problem-problem selama pemasangan, start procedure, testing procedure.
  6. Problem-problem operasi dan troubleshooting
    Well problem, electrical problem, overload dan underload shutdown, interpretasi ammeter chart.
  7. Peralatan-peralatan penunjang (accessories)
    Pressure Sensing instrument atau pressure heat device, VSD, Sonolog, Y-tool, Shroud, packer.

Wajib diikuti oleh    
1. Electrical & Mechanical Engineer / Supervisor
2. Instrument Engineer / Supervisor
3. Professionals
4. Plant Maintenance / Operators / Supervisor / Superintendent

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Sistem Pemipaan (Piping)

Jadwal Training

Sistem Pemipaan (Piping) TRAINING TIME : 11 – 14 Agustus 2014 23 – 26 September 2014 10 – 13 November 2014 VENUE :   Hotel Kagum ... Baca Selengkapnya

Sistem Pemipaan (Piping)

 

Sistem Pemipaan (Piping)

TRAINING TIME :
11 – 14 Agustus 2014
23 – 26 September 2014
10 – 13 November 2014

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

LATAR BELAKANG:
Pipa sebagai cubing panjang dari tanah liat, konkret, loham, kayu, dan sebagainya untuk mengalirkan air, gas, minyak, dan cairan-cairan lain. Fluida merupakan substansi yang dapat mengalirkan cairan atau gas. Hampir setiap tahun diperkenalkan kegunaan baru untuk pipa yang menghasilkan kebutuhan baru dan pengembangan spesifikasi-spesifikasi material dan pengembangan kepintaran disainer perpipaan. Saat ini pipa dapat dicari hampir di setiap tempat, baik perpipaan dalam automobil hingga sistem perpipaan yang rumit (pipa proses, jalur pipa, pipa tenaga uap pabrik atau salah satu dari berbagai kategori lainnya) pada industri rekayasa. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Perancangan Sistem Perpipaan.

SASARAN:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang instalasi perpipaan.

OUTPUT TRAINING:
1.    Pemahaman tentang pengetahuan perancangan sistem perpipaan meliputi dasar-dasar perpipaan, standar dan simbol pipa, jenis pipa, sambungan, fitting, dan katup, teknik fabrikasi pipa, pemilihan pipa, konstruksi sistem perpipaan, dan perhitungan pipa).

CAKUPAN MATERI TRAINING:

  1. Dasar-dasar perpipaan (fungsi perpipaan, sifat fluida, elemen perencanaan perpipaan).
  2. Simbol pipa.
  3. Jenis pipa dan sambungan pipa.
  4. Fitting, flens, katup, dan kran.
  5. Fabrikasi pipa.
  6. Konstruksi sistem perpipaan.
  7. Aliran dalam pipa dan rugi-rugi aliran.
  8. Pemilihan pipa.
  9. Disain perpipaan.
  10. Standar pipa.
  11. Instrumentasi perpipaan.
  12. Maintenance.
  13. Pipe line detection.
  14. Pipe line drying.
  15. Pipe line leak detection.
  16. Hydrostatic testing.

INSTRUCTOR :    Ir. Sugeng Isdwiyanudi, MT.   and Team

INVESTATION PRICE/PERSON :   
1.    Rp 7.950.000/person (full fare)  or
2.    Rp 7.750.000/person (early bird, payment 1 week before training)  or
3.    Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

VALVE (CHOKE & CONTROL VALVE)

 

VALVE (CHOKE & CONTROL VALVE)

TRAINING TIME :
26 – 29 Agustus 2014
23 – 26 September 2014
28 – 31 Oktober 2014
25 – 28 November 2014
16 – 19 Desember 2014

VENUE :  Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :  4 hari

TRAINING OBJECTIVES:
After the course participant Will have a good understanding basic design valve and the function the parts. Understand how valve performance , operation, related to process operation  as control instruments. Have a good knowledge valve  reliability, maintenance (preventive and predictive) troubleshooting. Understand how valve failure.

CAKUPAN MATERI TRAINING:
1.    Introduction

  • Valve Theory
  • Control Valve Performance
  • Control Valve Standards – Ansi & Api
  • Case And Discussion

2.    Valve Operation And Control

  • Valve  As Instrument Control
  • Valve Control  Star System :  What Is Valve Yard And How Its Operated.
  • Valve Control  Noise
  • Valve Control Cavitations

3.    Practice Assembly And Disassembly Valve

  • Installation And Maintenance .
  • Valve Disassembly – Assembly /Hands On
  • Valve Failure On Component And How Inspection
  • Valve Testing (Theory)

INSTRUCTOR :  Ir. Syahbardia, MT.  dan Tim

INVESTATION PRICE/PERSON :    

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  • Modul Training
  • Flashdisk Training berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Ir. SYAHBARDIA, MT.  alumni dari teknik mesin Institut teknologi Bandung, ITB (sarjana), dan teknik material ITB untuk program magister. Beliau pernah menjadi dosen di Politeknik ITB/POLBAN dan sekarang Beliau menjadi dosen di jurusan teknik di universitas Pasundan, Bandung. Beliau memiliki pengalaman lapangan praktis sebagai mechanical engineer ketika beliau bekerja, seperti di IPTN, PINDAD, dan PAL. Ir. Syahbardia,MT. sudah sering menjadi instruktur di training-training industri untuk perusahaan-perusahaan di Indonesia. Diantara judul-judul yang Beliau sampaikan adalah Predictive and Preventive Pump Maintenance, Compressor Characteristic Maintenance & Troubleshooting, Rotary Equipment Maintenance, Lubrication, Operation, Maintenance and Trouble Shooting, Materials Selection and Knowledge for Engineers, Centrifugal Compresor & Steam Turbine Performance, Welding Inspection, Turbine & Generator Operation, Boiler Water Treatment, Pump Operation and Maintenance, Electrical Motor Control System, Corrosion and Cathodic Protection, Fluid Flow Measurement, Generator Preventive Maintenance, Heavy Equipment Management, Preventive and Predictive Maintenance, dan lain-lain.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Oil Transportation Piping

Jadwal Training

Oil Transportation Piping TRAINING TIME :   26 – 29 Agustus 2014 13 – 16 Oktober 2014 24 – 27 November 2014 VENUE :   Hotel Kagum ... Baca Selengkapnya

Oil Transportation Piping

 

Oil Transportation Piping

TRAINING TIME :  
26 – 29 Agustus 2014
13 – 16 Oktober 2014
24 – 27 November 2014

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

LATAR BELAKANG:
Sistem transportasi saluran pipa liquid atau petroleum yang digunakan termasuk seluruh saluran pipa pembawa minyak mentah (kasar), produk petroleum, dan gas petroleum, terminal-terminal, tempat pembersihan, pabrik gas alam, dan pesanan dan tempat penerimaan. Termasuk juga tempat penampungan fasilitas gas dari petroleum cair pada saluran pipa tertutup, fabrikasi dari pipa dan sambungan, dan penggabungan saluran beberapa fasilitas perpipaan. Pengkodean transporatsi saluran pipa minyak meliputi disain dan pembuatan tekanan vessel, tempat penyimpanan atau tangki-tangki, saluran pipa dengan logam dengan temperatur di atas 250 oF atau di bawah – 20 oF, casing, tubing, pipe used in oil or gas wells, oil gas separtors, crude oil production tanks, saluran pipa pembersihan petroleum, transmisi gas dan pipa distribusi, disain dan fabrikasi peralatan atau instrumen, atau heat exchanger. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Oil Transportation Piping.

PESERTA:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang instalasi perpipaan.

OUTPUT TRAINING:

  • Pemahaman karyawan tentang pengetahuan sifat-sifat minyak
  • Pemahaman karyawan tentang kerugian tekanan pada pipa
  • Pemahaman karyawan tentang disain, pemilihan material, pembuatan dan perbaikan, pemeriksaan, dan pengetesan dari sistem transportasi minyak pada pipa.

CAKUPAN MATERI TRAINING:

  1. Properties of oils
  2. Friction loss in pipe
  3. Design conditions and criteria oil transportation piping
  4. Pressure design of piping components
  5. Selection and limitations of piping components
  6. Expansion, flexibility, support, and restraints
  7. Material and dimensional requirements
  8. Welding and installation
  9. Inspection and test

INSTRUCTOR :    Ir. Sugeng Isdwiyanudi, MT.   and Team

INVESTATION PRICE/PERSON :   

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Process Piping And Pipeline System (YOGYAKARTA)

 

Process Piping And Pipeline System (YOGYAKARTA)

Tanggal
19 – 22 Mei 2014
16 – 19 Juni 2014
8 – 11 Juli 2014
19 – 22 Agustus 2014
15 – 18 September 2014
13 – 16 Oktober 2014
17 – 20 November 2014
9 – 12 Desember 2014

Tempat
Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

DESKRIPSI & TUJUAN TRAINING :
Pelatihan ini dibuat untuk menghasilkan skill dan pemahaman komprehensif tentang proses perpipaan dan sistem jaringan pipa. Setelah mengikuti pelatihan ini, peserta diharapkan dapat mengembangkan pengetahuan dan kemampuan yang diperlukan didalam pengendalian perpipaan, perlindungan pada korosi sistem jaringan pipa, mengembangkan kemampuan didalam memahami dan mengevaluasi hasil dari chemical injection dan peralatan pressure release.

CAKUPAN MATERI TRAINING :

  1. Specification and standard of process piping & pipeline system
  2. Piping, pipeline operation & basic technical calculation
  3. Erotion and corrosion problem in piping and pipeline system
  4. Technical aspect of chemical injection into process and tranportation pipeline system
  5. Access fitting assembly for chemical injection and fluid sampling
  6. Safety equipment / pressure release device
  7. Introduction of stress analysis
  8. Latihan, Diskusi dan tanya jawab

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI? :
Beberapa kategori para profesional yang dapat mengikuti kursus :
D3 atau SLTA yang berpengalaman kerja minimal 3 tahun atau setara sebagai teknisi, operator, foreman supervisor produksi dan supervisor pipeline.

TRAINING DURATION : 4 hari

INVESTATION PRICE/PERSON :

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Y. Agus Jayatun, MT.,IPP. Adalah lulusan dari teknik mesin UGM, dan sekarang Beliau menjadi dosen di Teknik Mesin Sekolah Tinggi Teknologi Nasional Yogyakarta. Pak Agus Jayatun sudah sering menjadi instruktur untuk training-training di bidang kompetensi Beliau, seperti: Centrifugal Pump; Operation and Maintenance, Compressor; Operation and Maintenance, Boiler; Operator Sertification, Maintenance Management, Total Alignment and Balancing, Mechanical Power Transmision, Pipeline design, construction and maintenance, Control Valve, design, operation and maintenance, Rotating Equipment; Operation and Maintenance, Bearing; Design and Maintenance, Lubrication, Vibration analysis and diagnostic, Above Ground Storage Tank, Corrosion Control : Sacrifice Anode, Impressed Current, Galvanizing, Metallurgy for non metallurgic engineers, Metallurgy in Welding, Health, Safety and Environment (HSE). Pak Agus Jayatun juga sudah berpengalaman bekerja di beberapa perusahaan dengan berbagai posisi seperti dari sales engineer, Mechanical and Electrical Site Engineer, M/E. Site Engineer pada Process of Clean Water Instalation, M/E. Site Engineer pada Office Building of PLN, Supervisor M/E Engineer, Mechanical Engineer pada Detail Engineering Design of Non Liquid Waste of Komplek Industri Kulit dan masih banyak yang lainnya. Beliau memiliki beberapa sertifikasi profesional dari PII dalam bidang Plumbing/Piping, Air Conditioning, Indoor Building Transportation, Mechanical, dan electrical.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

PIPELINE : Design, Testing, Inspection And Maintenance

 

PIPELINE : Design, Testing, Inspection And Maintenance

Tanggal
21 – 24 April 2014
20 – 23 Mei 2014
23 – 26 Juni 2014
14 – 17 Juli 2014
25 – 28 Agustus 2014
22 – 25 September 2014
21 – 24 Oktober 2014
24 – 27 November 2014
15 – 18 Desember 2014

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TUJUAN TRAINING :
Setelah menyelesaikan Training, para peserta akan.

  1. Mempunyai wawasan yang lebih luas dalam bidang Pipeline.
  2. Memahami parameters yang menentukan rancangan.
  3. Mengetahui cara-cara melaksanakan uji instalasi.
  4. Mampu melakukan pemilihan material
  5. Mengetahui cara-cara fabrikasi komponen-komponen dan pengujiannya.
  6. Mampu menangani masalah masalah kritis yang terkait dengan Pipeline

CAKUPAN MATERI TRAINING :

  • Pipe Line Overview: General Considerations, CODES, STANDARDS and REGULATIONS.
  • Hydraulic Calculation ( liquid and gas), flow and pressure drop and Codes related
  • Construction : Sustained load, Expansion Load, Occasional Load, Stress Analysis, Support , Vibration and Codes related
  • Pipe Line Testing and Codes related
  • Material and fabrication and Codes related
  • Valves and Fittings, Gas disposal, Sizing and Codes related
  • Pipe Line Protection : coating and corrosion prevention and Codes related
  • Testing and Inspection and Codes Related
  • Maintenance

SIAPA SEBAIKNYA MENGIKUT TRAINING INI? :

  • Pipe Line Engineers
  • Operation Engineers
  • Maintenance Engineers
  • Production Engineers
  • Technical Supports Engineers
  • Technical Staffs
  • Siapa saja yang mempunyai minat dalam bidang Pipe Line

TRAINING INSTRUCTOR
Ir. Pawito Merto Sontowiro, Msc
Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti bidang Coal Energy , Argonne, Chicago, Ill., USA, bidang Combustion, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy.. Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training untuk banyak perusahaan di Indonesia seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC SES LTD, PLTGU BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain. Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

INVESTATION PRICE/ PERSON :

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified and experienced instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Piping Design and Material Selection Training

 

Piping Design and Material Selection Training

Tanggal
07 Oktober 2013
03 Desember 2013

Tempat
Surabaya

Investasi
Rp. 1.500.000, –  (Registration 3 person/more; payment before H-7)
Rp. 1.750.000, –  (Reg before H-14, payment before H-7)
Rp. 2.250.000, –  (Payment On The Spot)
Rp. 2.475.000, –  (Full Fare)

Piping Design and Material Selection Training merupakan suatu program training  yang diberikan kepada Piping Designer, Field Engineer, Project Engineer, Maintenance Engineer, Mechanical Enginer, Piping Supervisor , dan pihak pihak yang terkait dan memiliki system pemipaan.

Workshop ini akan memberikan dasar dasar perhitungan dan pemilihan material untuk berbagai system pemipaan :

  • Piping Design
  • Pipe Sizing.
  • Pipe Strength Calculation (Required Minimum Wall Thickness),
  • Pressure Drop Calculation
  • Piping Stress Guide Line
  • Pipe Support.
  • Pipe Insulation
  • Pipe Material Selection Guide.
  • Fitting Material Selection Guide
  • Valve Selection Guide
  • Piping Special Material (Steam trap, Strainer, Expansion Joint, Spring Hanger)
  • Piping Material Selection

Silabus :

  • Process Piping (ASME B.31.3)
  • Valve Selection Hand Book , Fourth Edition, R.W. Zappe,
  • Facility Piping System Hand Book, Second Edition, Michael Frankel.
  • Power Piping (ASME B31.1)
  • Pipe Hanger and Support – Selection  and Application (MSS – Standard Practice -68)

Metode :
Metode yang digunakan:  Class Room ,simulasi Foto, diskusi dan ceramah.

Workshop Leader :
Arif Yudianto ,ST.
Telah memiliki pengalaman 7 tahun dibidang operasional dan maintenance pompa, 7 tahun di bidang engineering (pumps selection and sizing)  dan 3 tahun di bidang konstruksi (installasi & Commissioning) . Pada tahun 1997 pernah menerima training khusus tentang Steam Turbine di Workshop Siemens, Gorlitz, Germany memberikan dasar  yang kuat untuk mengembangkan pendalamannya di bidang Rotating Mesin termasuk Pompa dan Steam Turbine. Sejak tahun 1998 memberikan inhouse training ke teknisi mekanik , beberapa trainee berhasil menjadi teknisi yang berkualitas internasional dan mengerjakan beberapa pekerjaan perbaikan di luar negeri.

Arif Yudianto berlatar belakang pendidikan Teknik Mesin  dari ITS.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

2024

informasi-seminar.com | infoseminar.co.id