Jadwal Training 2024

Oil and Gas Project Feasibility Study

Jadwal Training

Oil and Gas Project Feasibility Study September 21-23, 2010 at Bandung Investasi dilakukan dalam industri minyak dan gas pada dasarnya merupakan usaha menanamkan faktor-faktor produksi ... Baca Selengkapnya

Oil and Gas Project Feasibility Study

 

Oil and Gas Project Feasibility Study

September 21-23, 2010 at Bandung

Investasi dilakukan dalam industri minyak dan gas pada dasarnya merupakan usaha menanamkan faktor-faktor produksi dengan harapan dapat memberikan manfaat baik berupa keuntungan atau manfaat lain. Investment Feasibility Study merupakan usaha untuk menjamin agar investasi yang bersifat terbatas betul-betul dapat mencapai tujuan seperti yang diharapkan baik dari segi manfaat ekonomi, financial maupun sosial . Feasibility Study merupakan langkah yang sangat penting untuk memulai investasi di bidang minyak dan gas.

Materi Seminar

1. Karakteristik proyek minyak dan gas.
2. Apa yang dimaksud dengan Investasi dan pentingnya Feasibility Study dalam proyek minyak dan gas.
3. Aspek teknis dan operasional proyek minyak dan gas.
4. Laporan keuangan perusahaan
5. Neraca, laporan laba/rugi dan cash flow.
6. Mengukur performansi laporan keuangan perusahaan.
7. Sumber dana Investasi.
8. Teknik Evaluasi investasi :
– Pay Back Period.
– Internal rate of Return (IRR).
– Net Present Value (NPV).
– Minimum attractive rate of return (MARR)
– Break Even Point (BEP)
– Studi kasus dan latihan.
9. Penyusunan Laporan Feasibility Study
10. Studi Kasus penyusunan Feasibility Study.

Yang Hadir dalam seminar :
Finance and Accounting Manager * Project Manager,Project Planner * Cost Controller* Operation manager * Human Resource Development Manager dan semua Eksekutif yang terlibat atau tidak langsung dalam kegiatan Feasibility Study usaha minyak dan gas.

INSTRUKTUR
Ir. Asep Saefulbachri, MBA, MM
An engineer graduated from Industrial Technique, Bandung Institute of Technology (ITB) and continued his study in Master in Business Administration. He also widened his knowledge through several trainings abroad. His got his experience in material management, warehousing and transportation management, and management of information system during 15 years working in Direktorat Logistik in Head Office of PT. Telkom. He also is being a lecturer in post-graduate program, majoring logistics management in Pasundan University , Bandung and also in several well-known universities in Bandung , STT Telkom majoring Industrial Technique. He also becomes a lecturer in the Magister management program in Sekolah Tinggi Manajemen Bandung (STMB Telkom).
He got the experience to deliver In-company Trainings and/or seminars in a few management institutions in Bandung , Jakarta , Syrabaya and Kuala Lumpur , specializing in logistics management and supply chain. Up until now, he also still active as a logistics trainer in some companies, such as Pertamina, Petrochina, PT. badak, PT. Inco Soroako, Telkom, Telkomsel, etc.

General Information
Certificate of Appreciation
All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code
o.Quality training material kits will be on registration, additional papers, & handouts assignment by TIM.
o.Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.
o.Casual clothing is recommended. The training atmosphere is informal.

Facilities
o.Quality training material (hardcopy and softcopy)
o.Quality training kits included calculator, T-shirt or jacket, cap, ect.
o.Interactive presentation with discussion
o.Convenient training facilities with five star quality
o.Lunch per day
o.Morning and afternoon coffee / tea breaks for along the training
o.Certificate of Completion
o.Half day city tour at the end of training session following by dinner with entertainment (Optional)
o.Exclusive flash disk.

Tuition Fee & Registration Deadline
IDR 7.250.000,-/ Person, Registration deadline a weeks before training held.

Minimum Participant
This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

OIL & GAS SURFACE PRODUCTION SYSTEM FACILITY OPERATION MAINTENANCE

 

OIL & GAS SURFACE PRODUCTION SYSTEM FACILITY OPERATION MAINTENANCE

September 21-24, 2010 at Bandung

WHY SHOULD ATTEND?
This practical approach course is designed to provide a comprehensive understanding of Surface Production Facility, Operation and Maintenance. It will be delivered in order to meet the needs of non-technical personnel, and go into detail of technical personnel’s daily in-field operation, safety and maintenance.

WHO SHOULD ATTEND?
Technical and non-technical personnel of Oil & Gas Company who involves in or concern with daily onshore & offshore oil & gas surface production facility and equipment operation and maintenance and those who responsible of the continuity and integrity of the surface production and processing operation.

WHAT WILL THE PARTICIPANT GET?
After completion of this course, participants will understand why oil & gas must be processed in near well surface production facility, how the process is carried out, what equipment and components are needed, how each equipments works, and what are the goals to be achieved in each stage, in both technical and economical point of views. Participants will better classify requirements for each separation process and specification of vessels, columns, piping, valves, pump, compressor and related devices used in surface operations and improve knowledge on safety, inspection, maintenance and troubleshooting of the whole system.

THE MAJOR OUTLINE COURSE:
1. Flowing Oil and Gas Wells Facility
2. Oilfield Surface Production Operation and Facility
3. Gas field Surface Production Operation and Facility
4. Pumping and Compression Operation and Facility
5. Safety and Maintenance of the Surface Facility

COURSE LEADER:
This specially designed course will be conducted by *Hilman Ahmad & Associates*, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Professional Industrial Oil & Gas Education Center, and has been practicing production operation, safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design, construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000. He has been delivering training course in production operation, maintenance & safety and corrosion control for personnel from Oil & aGas Company and Petrochemical Industry since 1979.

General Information
Certificate of Appreciation
All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code

  1. Quality training material kits will be on registration, additional papers, & handouts assignment by TIM.
  2. Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.
  3. Casual clothing is recommended. The training atmosphere is informal.

Facilities

  • Quality training material (hardcopy and softcopy)
  • Quality training kits included calculator, T-shirt or jacket, cap, ect.
  • Interactive presentation with discussion
  • Convenient training facilities with five star quality
  • Lunch per day
  • Morning and afternoon coffee / tea breaks for along the training
  • Certificate of Completion
  • Half day city tour at the end of training session following by dinner with entertainment (Optional)
  • Exclusive flash disk.

Tuition Fee & Registration Deadline
IDR 8.750.000,-/ Person, Registration deadline a weeks before training held.

Minimum Participant
This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Petroleum Finance Accounting & Cost Control

 

Petroleum Finance Accounting & Cost Control

(To understand or refresh knowledge of basic finance, accounting &cost control concept and the role financial statements play in oil and gas operations)

Tanggal dan Tempat
June 7-10, 2011 at The Jayakarta Hotel Bandung

About The Course
Making the most efficient use of your financial resources is critical to the success of any producing company. Finance and accounting comprise the universal business language and help you manage your resources effectively. Planning and decision – making that occur in an informal financial context permit better application of recourse and promote competitive advantage. The aim of this course is to improve delegates’ job performance by enhancing their understanding of current international practices in finance and accounting within the E&P industry. This is achieved through an examination of: accounting standards, policies and practices in the oil and gas. An understanding of accounting also allows a company to trace a competitor’s actions from its financial statement and to plan accordingly. These concepts will be presented and reinforced using relevant examples and case studies. Participants are encouraged to bring their company’s financial reports.

The Objective of the Course:

  1. To Learn Basic of Technical Economics.
  2. To give comprehension of general management in oil field.
  3. To find out and analyze design in Work Program and Budget of oil company.
  4. Calculation and analysis of field profit determination.

Who Should Attend?
• Reservoir Engineer
• Production Engineer
• Production Supervisor
• Economist and Accounting
• POD division

Outline Course

  • Overview of Petroleum Finance, Accounting and Cost Control.
    • Methods to measure profit indicators.
    • Determining choices from alternatives.
    • Cost Analysis.
    • Cost structure for Tax Calculation.
    • Oil, Gas, and Energy prices.
  • Oil company business contract model in Indonesia.
  • Basic Reservoir Engineering.
  • Work Program and Budget.
  • General POD and AFE.
  • Government Tax and Non-Tax Revenue.
  • Determining Oil and Gas process.
  • Oil and Gas company management.
  • Risk and Sensitivity Analysis management.

Course Leader
Arsegianto, he is a Doctor at Department of Petroleum Engineering of the Institute Teknologi Bandung, Indonesia. He earned his Master of Science from University of Wisconsin, Madison (USA) at Department of Urban and Regional Planning in Major Energy Analysis, Policy and Planning. He obtained his Doctor from Asian Institute of Technology, Division of Energy Technology in Bangkok, Thailand.

He has been delivering training course in Economic, Finance, Marketing, Policy & Planning Analysis of petroleum & Gas Industry since 1992. he also has expertise in technical petroleum engineering. His professional experience include contributing author in many congresses conventions, exhibition, seminars, workshop, symposiums & conferences. His current membership of the International Association For Energy Economics (IAEE), Society of Petroleum Engineering (SPE), Society of Indonesia Petroleum Engineering, & Komite Nasional Insonesia – World Energy Council (KNI-WEC).

General Information
Certificate of Appreciation
All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code
o.Quality training material kits will be on registration, additional papers, & handouts assignment by TIM.
o.Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.
o.Casual clothing is recommended. The training atmosphere is informal.

Facilities
o.Quality training material (hardcopy and softcopy)
o.Quality training kits included T-shirt or jacket, cap, ect.
o.Interactive presentation with discussion
o.Lunch per day
o.Morning and afternoon coffee / tea breaks for along the training
o.Certificate of Completion
o.Exclusive flash disk.

**) Optional

Tuition Fee & Registration Deadline
IDR 8.250.000,-/ Person, Registration deadline a weeks before training held.

Minimum Participant
This training will be conducted if we receive registration letter from 4 (Four) participants (Minimum)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Reservoir and Field Production

Jadwal Training

Gas Reservoir and Field Production October 5-8, 2010 at Jogjakarta Course Leader: Dr. Ir. Sudjati Rachmat, DEA COURSE TARGETS: After completing the lean participants are ... Baca Selengkapnya

Gas Reservoir and Field Production

 

Gas Reservoir and Field Production

October 5-8, 2010 at Jogjakarta
Course Leader: Dr. Ir. Sudjati Rachmat, DEA

COURSE TARGETS:
After completing the lean participants are expected to be able to:

  1. Understanding basic principles of natural gas exploitation, known as oil technology.
  2. Conduct simple diagnosis and comprehend management of natural gas production operations data, such as geological data production, rock and fluids reservoir data, production data, operating data and drilling data, and even economical analysis.
  3. Create a simple analysis of those data and process them by standard methods on natural gas technology.
  4. Conduct simple quantitative calculations of the entire acquisition operation gas production data: production geology, productive formation data evaluation, reservoir data, drilling data, production data and even economical data.

PRE-REQUISITE:
Backgrounds: Operator, Sr. Operator, Engineering and Non Engineering

COURSE OUTLINE:
1. Definition of Gas Production Operations and Engineering Technical Data and Its Management
• Geology Production Data
• Reservoir Engineering Data
• Technical Drilling Data
• Production Engineering Data
• Analysis Economical Data

2. Gas Reservoir
• Reservoir Formed Conditions
• Reservoir Pressure and Temperature
• Fluids Reservoir
• Stone Reservoir

3. Gas Reservoir Formation Evaluation
• Permeable Formation Determination
• Stone Porosity Determination
• Fluids Saturation Determination
• Reservoir Average Thickness Determining
• Tools Related to Formation Evaluation Implementation

4. Gas Well Drilling
• Operations
• Cost
• Completion
• Drilling Fluids
• Acquisition Data
• Optimize drilling
• Specific Drilling Problems
• Tools Related to Drilling Implementation

5. Estimated Reserves
• In-place Volume
• Stone Thickness
• Iso Porosity Map
• Iso Capacity Map
• Recovery Factor (Acquisition Factor)

6. Gas Reservoir Production Process
• Inflow Performance Relationship
• Tools Related to Production Facilities on Bottom Surface

7. Production Facilities on Surface
• Field Processing Unit
• Gas Piping System
• Tools Related to \ Production Facilities on Surface

8. Analysis of Reservoir Performance
• Gas Reservoir Acquisition
• Efficiency Gas Acquisition
• Material balance
• Performance Production Forecasting

9. Basic Principles of Economical Analysis
• Main Parameter of Economical Analysis
• Net Present Value
• Internal Rate of Return
• Pay Out Time
• Profit to Ratio Investment
• Some case studies

Course Leader
Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.
For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.
He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

General Information
Certificate of Appreciation
All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code
o.Quality training material kits will be on registration, additional papers, & handouts assignment by TIM.
o.Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.
o.Casual clothing is recommended. The training atmosphere is informal.

Facilities
o.Quality training material (hardcopy and softcopy)
o.Quality training kits included T-shirt or jacket, cap, ect.
o.Interactive presentation with discussion
o.Lunch per day
o.Morning and afternoon coffee / tea breaks for along the training
o.Certificate of Completion
o.Exclusive flash disk.

Tuition Fee & Registration Deadline
IDR 8.250.000,-/ Person, Registration deadline a weeks before training held.

Minimum Participant
This training will be conducted if we receive registration letter from 4(four) participants (Minimum)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Basic Drilling and Health, Safety, Environmental Consideration

 

Basic Drilling and Health, Safety, Environmental Consideration

Tanggal dan Tempat
1-4 November 2011

SASARAN BELAJAR :
Setelah menyelesaikan kursus ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.
  • Melakukan diagnosis sederhana dan memengerti penyelesaian dan membuat suatu sumur minyak, gas atau panas bumi.
  • Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran kinerja dan merencanakan pengembangannya.
  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.
  • Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.
  • Pengetahuan tentang Peraturan Perundangan dalam K3L
  • K3L dalam Operasi Pemboran

Who Should Attend?
Latar belakang : Operator/Senior Operator/Engineer/Non Engineer

Outline Course
1. Introduction : Rotary Drilling Operations
Steps to drilling a well
Types of rigs
Rig Components
Rig Systems

2. Rheology of Drilling and Completion Fluids
Equations and Inflow PerformanceRelationship Functions of Drilling/ Completion Fluids
Fluid Types,
Fluid Models
Introduction to Rotary Viscometer
Other Testing Equipment
Objectives of Monitoring Fluids

3. Mud System
General Equations and Concepts Diagnostic tests
Water based muds
Oil based muds
Additives
Mud handling system

4. Cementing
Tubing Design Functions of cement
Cement Types
Cement Additives

5. Oil Field Tubulars and Hydraulics
Drill string
Casing and tubing
Casing classification
Stresses on casing
Casing setting depth
Burst and collapse calculations
Wellheads

6. Drilling System – Pressure Loss Calculations
Hydrostatics
Buoyancy
Flow through pipes and annuli
Flow path
Pressure loss calculations

7. Drilling System – Bit & Nozzles
Hydrostatics Bit Types
Bit Parts
Bit Classification
Bit Nozzles

8. Introduction to Well Control
Hydrostatics Definitions
Causes of kicks
Kick indicators
Shut-in procedure
Well Kill Procedures

9. Directional Drilling
Reasons for directional wells
Planning Trajectory
Kickoff Methods
Survey Methods
Survey Calculations

10. Health, Safety and Environmental Consideration in Drilling Operation
Peraturan Perundangan tentang K3L
Pengauh Gas Beracun pada Operasi Pemboran
Pengaruh Gas Beracun Bagi Kesehatan
H2S
Gas Detection Equipments
Noise level & exposure in Oil Gas Industry
Noise Mapping

Course Leader
Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.
For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.
He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

General Information
Certificate of Appreciation
All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code
o. Quality training material kits will be on registration, additional papers, & handouts assignment by TIM.
o. Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.
o. Casual clothing is recommended. The training atmosphere is informal.

Facilities
o.Quality training material (hardcopy and softcopy)
o.Quality training kits included T-shirt or jacket, cap, ect.
o.Interactive presentation with discussion
o.Lunch per day
o.Morning and afternoon coffee / tea breaks for along the training
o.Certificate of Completion
o.Exclusive flash disk.

Tuition Fee & Registration Deadline
IDR 8.250.000,-/ Person, Registration deadline a weeks before training held.

Minimum Participant
This training will be conducted if we receive registration letter from 4(four) participants (Minimum)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

PDMS Structural STANDARD COURSE

 

PDMS Structural STANDARD COURSE

Tanggal
Agt 25-27 2010
Sep 28-30 2010
Okt 26-28 2010
Nov 24-26 2010
Des 21-23 2010

Jam Pelaksanaan
09.00-16.00 WIB

Tempat
Jakarta
Kepastian Lokasi Training akan disertakan di dalam Undangan

Pembicara / Fasilitator
Team Trainer
Profil Pembicara dan Pengalaman mengajar akan disertakan di dalam Undangan

Harga
Rp. 4.000.000
Sudah termasuk sertifikat, makan siang, 2 kali snack

Introduction
* Introduction to the Oil & Gas Site
* Overview PDMS Scope
* Controling PDMS

Key Topics
Initial Setting Up Operation
* Setting Up Database Hierachy
* Storage Area Define Calendar

Creating Structural Model
* Straight Section
* Nodes
* Making Member
* Copying
* Devide
* Merge
* Trim
* Extend
* Rotate
* Changing Storage Area

Structural Detail
* Stiffener
* Lifting Lug
* Base Plate
* Beam – Column Flange Connection
* Beam – Column Web Connection
* Cleat Connection
* Snipe End Connection
* Haunch

Plates
* Making Plate
* Plate Modification
* Penetration at Plate

Streel Work Penetration
Access Way, Stair & Ladder
Jacket Modeling
2D Draft

Participant
Project Engineer, Piping Designer, Mechanical Engineers, Maintenance Enginers & Supervisor, Service Engineers & Supervisor, Work Over Engineers & Supervisor, Plant Engineers, Petroleum Engineers

Learning Method
Lecture, Case Study and Workshop

Duration
3 Days (9am – 4.30pm)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pump Selection, Design and Operation for Oil and Gas Surface Production Facilities

 

Pump Selection, Design and Operation for Oil and Gas Surface Production Facilities

Tanggal
21-24 September 2010

Jam Pelaksanaan
09.00-17.00

Tempat
Bali

Pembicara / Fasilitator
Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.
For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.
He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

Harga
Rp.8.750.000,-/

OBJECTIVES :
After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of oil and gas handling with surface processes and operation facilities , and how to operate pump technology in field application.
  • Diagnostic of oil and gas flow performance under actual pumping drive mechanism and future performance with current handling processes.
  • Analyze the production flow potential of oil and gas flow under actual handling facilities system processes and to plan the better development processes according to fluid flow capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects the phenomena of oil and gas handling processes and operation with given surface facilities and pumping system.

COURSE OUT-LINE

* Introduction to Oil and Gas Production Operation

* Oil Surface Production Facilities
o Well Equipments
o Pigging System
o Separator
o Gas Scrubber
o Gas Dehydarator
o Pumps : Centrifugal, Reciprocating, Diaphragm

* Gas Surface Processing Facilities
o Gas Sweetening
o Heat Exchanger
o Fractionation, Liquefaction, Refrigeration System
o Compressor

* Pump Basic Theory
o Centrifugal Pump
o Conservation of Mass
o Specific Velocity
o Pump Performance
o Cavitations

* Pump Specification
o Pump Specification
o Flow Capacity
o Fluid Properties
o Head
o Net Positive Heads
o Rotation Determination and Pump Types
o Viscous Fluid Correction
o Material Selection
o Prime Movers Selection

* Pump Application
o Pump Installation Plan
o Pump Application Example

* Pump Construction
o Pump Classification by Impeller
o Pump Classification by Casing
o Pump Classification by Stage Number
o Pump Classification by Axis Position

* Pump Operation
o Head Capacity Curve
o Parallel and Serial Operation
o Capacity Regulator
o Water Hummer
o Surging
o Pressure Fluctuation
o Automatic Operation

* Pump Instalation
o Horizontal Instalation
o Vertical Instalation
o Submersible Instalation
o Pipping System
o Vibration and Noise Protection

* Pump Maintenance
o First Inspection
o Operation Condition Observation
o Safety Instrument
o Maintenance Management
o Overhaul

* Pump Trouble Shooting
o General Trouble Shooting
o Submersible Pump Trouble Shooting

General Information
Certificate of Appreciation
All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code

  • Quality training material kits will be on registration, additional papers, & handouts assignment by TIM.
  • Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.
  • Casual clothing is recommended. The training atmosphere is informal.

Facilities

  • Quality training material (hardcopy and softcopy)
  • Quality training kits included calculator, T-shirt or jacket, cap, ect.
  • Interactive presentation with discussion
  • Convenient training facilities with five star quality
  • Lunch per day
  • Morning and afternoon coffee / tea breaks for along the training
  • Certificate of Completion
  • Half day city tour at the end of training session following by dinner with entertainment (Optional)
  • Exclusive flash disk.

Minimum Participant
This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

 

Design and Operation for Oil and Gas Surface Production Facilities

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

INTRODUCTION TO OIL & GAS INDUSTRY

 

INTRODUCTION TO OIL & GAS INDUSTRY

Tanggal
29 – 31 July 2010

Jam Pelaksanaan
09.00-16.00 WIB

Lokasi
Galery Ciumbuleuit Hotel Bandung

Pembicara / Fasilitator
Ir. M Mansyur
Mohammad Mansur, has 11 years experience as consultant and training instructor in various oil and gas companies area. Mansur has Sarjana Degree of Petroleum Engineering ITB – Bandung. He spent 30 years at PT. Stanvac Indonesia (PTSI) as Production Engineering Supervisor, and 3 years as VP/Sr. Manager of Technical Division at PT. Ustraindo Petrogas and 10 years as a Lecturer of Petroleum Engineering Department at Trisakti University. Some clients that have been served by Mansur are Expan, Vico, Kondur, Total Fina-Elf, Premier Oil Natuna Sea, Caltex-Indonesia, Pertamina, Kodeco, Conocco Phillips, Unocal, Medco EPI, etc. His experiences in consulting about Comprehensive IDP program for staff & Managerial positions and TNSA for Vico, Training Need Survey (Skill gap Analysis) for Premier Oil, Developing Training Matrix for Perusahaan Gas Negara (PGN), developing training matrix for PT. A.S.E.I, Job description & Organization Structuring for PT. Dos Ni Roha, Job Description & Evaluation for Staff and Managerial Positions for EMP Kangean Ltd., EMP Kalila Ltd. and Geo Energy Ltd. From 2002 – now Mansur as Class mentor for Graduate Engineering Trainee (GET) programs, for PT. Medco E&P Indonesia in Jakarta and oil & gas fields.
development, consulting

Harga
Rp. 5.500.000/peserta

The Origins of Oil & Gas
• The formation of petroleum
• Different kinds of reservoirs
• Reservoir characteristics

World Energy Demand & Supply
• Petroleum reserves
• Classification of reserves

Products from Petroleum
• Refining
• Petrochemicals
• Hydrocarbon pricing

Control of Petroleum Exploitation
• Ownership of reserves
• The control and award of petroleum concessions
• Unitisation
• Production Sharing Agreements

The Reservoir Life Cycle
• Exploration
• Appraisal
• Development
• Production
• Abandonment

Petroleum Economics
• How exploration, appraisal and development decisions are made

Drilling
• Drilling a well
• Drilling time depth/cost curve
• Drilling equipment
• The mud system
• Casing and tubing
• Cementing
• Directional drilling
• Side-tracking
• Dual completions
• Multilateral and horizontal wells

Production
• Reservoir drive mechanisms
• Artificial lift systems
• Well treatment and work over – fracturing, sand control, acidising
• Surface treatment – separation,compression
• Storage and transportation

Maintenance Activities
• Different kinds of maintenance – reliability,condition based, planned, breakdown

Logistics
• Materials management and warehousing
• Air and marine transportation

Crude Storage
• On Shore & Off Shore Finance Support Function

Description
The overall aim of the program is to make the participants understand the various aspects Oil & Gas Industries and will be able to improve delegates’ knowledge of:
1. Understand Oil & Gas Operation from
2. Exploration until Production
3. Better Performing of their Job
4. Having better coordination with other
5. Department/Function
6. the origins of oil and gas
7. the process of exploring for hydrocarbons
8. how governments control the exploitation
9. of hydrocarbons
10. the terminology and language of the business
11. the process of drilling for oil and gas.
12. the process of producing petroleum

Who should attend?
finance personnel, human resource professionals, information systems specialists, secretaries, administrative and technical support staff, New Hire Engineer & Managers, Finance/ HR personnel, Procurement / Logistic personnel, Staff and Senior staff at all business functions

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pipeline Oil & Gas Transportation

Jadwal Training

Pipeline Oil & Gas Transportation EPC (Engineering, Procurement & Construction) Tanggal 26-29 Juli 2010 Jam Pelaksanaan 09.00-17.00 WIB Tempat Gedung Mustika Ratu Lt 5 Jln. ... Baca Selengkapnya

Pipeline Oil & Gas Transportation

 

Pipeline Oil & Gas Transportation

EPC (Engineering, Procurement & Construction)

Tanggal
26-29 Juli 2010

Jam Pelaksanaan
09.00-17.00 WIB

Tempat
Gedung Mustika Ratu Lt 5
Jln. Gatot Subroto Kav.74-75
Jakarta 12870

Pembicara / Fasilitator
Team Training
Profile Pembicara disertakan di dalam undangan training

Harga
Rp. 4.500.000 Exc Vat 10%

Materi
Introduction

  • Introduction to the Pipeline Oil & Gas Transportation
  • Overview Enginering Scope
  • Overview Procurement Scope
  • Overview Construction Scope
  • Integrated Pipeline EPC Project

Pipeline for Oil & Gas Transportation

  • Project Overview
  • Project Setting
  • Simple Project Team
  • Membuat rencana biaya dan pengontrolan
  • Membuat rencana mobilisasi
  • Proqurement plan dan rencana pengiriman material
  • Alokasi Key personil proyek
  • Membuat detail schedule dari activitas bulanan, mingguan dan harian
  • Melakukan detail survey ( apabila diperlukan )

Key Topics
Pipeline Enginering

  • Line and Route Survey
  • Road Crossing, River Crossing, Railway Crosing and Utility Crossing
  • Material and support design
  • Pipeline design
  • Pipeline analysis
  • Detail engineering
  • Procurement Enginering and Procedures
  • Prosedur koordinasi
  • Jadwal detail pekerjaan ( Detail work schedule )
  • Alignment sheet, detail drawing, isometric drawing dan shop drawing
  • Spesifikasi peralatan dan material ( Equipments & Materials Specification )
  • Material Take Off ( MTO )
  • Vendors data book & drawing
  • Inspection and Test Plan dan Inspection Test Report
  • Operation Manual dan Program Pelatihan untuk pengoperasian peralatan
  • As-built drawing

Procurement

  • Pengadaan peralatan dan material yang akan dipasang disediakan oleh bagian Pengadaan ( Procurement ) berdasarkan daftar Material Take Off ( MTO ) yang disusun oleh bagian Engineering sesuai dengan gambar kerja , spesifikasi dan standar yang telah disetujui
  • Factory Acceptance Test
  • Beberapa bahan dan peralatan yang digunakan pada proyek terkadang harus dilengkapi sertifikat yang dikeluarkan oleh pabrik ( vendor ) ataupun instansi yang berwenang.
  • Engineering dan Quality Assurance / Quality Controll ketepatan jadwal pengiriman, jumlah dan mutu peralatan ataupun material yang dikirim.
  • Inspeksi terhadap peralatan dan material dilaksanakan berdasarkan jadwal pengiriman barang
  • Prosedur Inspeksi

Construction

  • Project Plan
  • Project Quality Plan.
  • Safety Performance
  • Schedule dan Kontrol Proyek
  • Persiapan dan Mobilisasi
  • Transportasi dan Penempatan Material
  • Stringing Pipa
  • Bending
  • Welding
  • Field Joint Coating
  • Trenching
  • Penurunan pipa dan Menimbun Kembali
  • Road Crossing
  • River Crossing
  • Swamp Crossing ( Crossing di Rawa )
  • Cleaning Pipeline
  • Hidrotest
  • Dewatering dan Flushing
  • Cathodic Protection
  • Pekerjaan Civil, Structure dan Piping
  • Pekerjaan Mechanical

Participant

  • Project Engineer
  • Piping Designer
  • Mechanical Engineers
  • Maintenance Enginers & Supervisor,
  • Service Engineers & Supervisor
  • Work Over Engineers & Supervisor
  • Plant Engineers,
  • Petroleum Engineers

Learning Method
Lecture, Case Study, Problem Solving

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

CONTRACT MANAGEMENT, STRATEGY AND ADMINISTRATION FOR OIL & GAS

 

CONTRACT MANAGEMENT, STRATEGY AND ADMINISTRATION FOR OIL & GAS

Tanggal
19-21 Juli 2010

Jam Pelaksanaan
08.00 – 16.00 WIB

Tempat
Wisma MM UGM Yogyakarta

Pembicara / Fasilitator
Nurjihad, S.H, M.H.

Harga
Rp. 4.000.000,- per orang (Non Residential)
Sudah termasuk Certificate, Training Kit, Module / Handout, Lunch, Coffee Break, Souvenir

DESKRIPSI
Hukum Kontrak Manajemen di bidang Minyak & Gas adalah suatu aspek kritis yang dapat menyebabkan terobosan besar dalam anggaran organisasi karena proses litigasi mahal dan proses penyelesaian sengketa. Sebuah pengamatan yang baik dan analisis secara keseluruhan draf kontrak untuk menghapus ambiguitas dan klausa berisiko dapat membuat perbedaan penting untuk keberhasilan atau kegagalan bottom line organisasi.
Pelatihan ini akan menjelaskan semua aspek pembentukan kontrak, pelaksanaan dan penyelesaian sengketa. Peserta akan belajar mitigasi risiko, strategi manajemen, dan karakteristik dari berbagai jenis kontrak sehingga akan memberikan peserta pemahaman lengkap tentang hukum kontrak yang memungkinkan mereka untuk menjadi negosiator handal.

MATERI
1. Introduction
2. Esensi dan elemen kunci dari Kontrak Oil & Gas
3. Proses pembentukan kontrak Oil & Gas
4. Klausul Kontrak dan Isu Terkait tentang Oil & Gas
5. Memahami dokumen kontrak Oil & Gas
6. Manajemen Risiko melalui perangkat hukum
7. Ganti rugi dan klausa Release
8. Hukum kontrak dan negosiasi
9. Hukum yang berlaku
10. Menghindari dan mengelola sengketa
11. Cara-cara Penyelesaian Sengketa
12. Penegakan proses

Wajib diikuti oleh

  1. Eksekutif / Manajer berurusan dengan semua jenis kontrak Minyak dan Gas,
  2. Legal officers & advisers untuk perusahaan Minyak dan Gas
  3. Manajer Keuangan
  4. Manajer Pengadaan, Pejabat, Eksekutif
  5. Direktur Operasi, Manajer Eksekutif
  6. Engineers involved in: Planning, Development & Facilities Management

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Oil and Gas Plant Processing

Jadwal Training

Oil and Gas Plant Processing Category: Petroleum / Oil & Gas Tanggal 26-30 Juli 2010 Jam Pelaksanaan 09.00-17.00 WIB Tempat Melia Purosani Hotel Yogyakarta Pembicara ... Baca Selengkapnya

Oil and Gas Plant Processing

 

Oil and Gas Plant Processing

Category:
Petroleum / Oil & Gas

Tanggal
26-30 Juli 2010

Jam Pelaksanaan
09.00-17.00 WIB

Tempat
Melia Purosani Hotel
Yogyakarta

Pembicara / Fasilitator
Dr.Ir. Drs. Herianto, MSc

Harga
Rp.8.250.000,-
per participant, excluding accommodation & tax.

COURSE OBJECTIVE
After attending this training, the participants are expected to be able to:

  1. Able to understand the types and physical properties of natural gas.
  2. Able to understand the gas transport facilities, such as gas flow pipes, compressor, heater and cooling system.
  3. Able to understand about the gas plant equipment, like Separator, Scrubber (Gas boat), Sweetening Dehydrator and natural gas (H2S and CO2 removal).
  4. Able to understand the process of separating gas from oil and water, drying of water droplets and gas condensate, and gas purification processes of impurities.
  5. Can Understand basic maintenance and troubleshooting field

COURSE OUTLINE

  • Composition of gas
  • Characteristics of gas
  • Facility well gas production and gas fields in transportation
  • Heater and cooling planning system in gas field
  • Facilities planning separator gas fields in fluids
  • Principles of work and operating gas dehydrator
  • Principles of work and operating gas sweetening

PARTICIPANT
Engineers, Supervisor/ Superintendent, Petroleum, Production, Operational, Maintenance.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Valuation and Risk Analysis of Oil & Gas Assets

 

Valuation and Risk Analysis of Oil & Gas Assets

Category:
Petroleum / Oil & Gas

Tanggal
26-28 Juli 2010

Jam Pelaksanaan
09.00-17.00 WIB

Tempat
Ibis Slipi Hotel
Jakarta

Pembicara / Fasilitator
Ir. M. Tavip Sunandar, MM, PMP

Harga
Rp.5.250.000,-
per participant, excluding accommodation & tax.

COURSE OUTLINE
INTRO TO ASSET AND VALUATION

  1. Definition of Oil and Gas Assets
  2. Why is valuation important?
  3. Physical and Monetary Asset Accounts
  4. The Investment Decision and lifecycle of E&P activities
  5. Investors & Host Country Business Views
  6. Introduction to PSC and its Terms

ASSET ECONOMIC VALUATION METHODOLOGY

  • Present Value
  • Net Present Value
  • Payback Period
  • Internal Rate of Return
  • Investment Efficiency
  • Project Life Cycle Cash Flow
  • Capital and Operating Expenditures

OIL AND GAS ACCOUNTING BACKGROUND AND METHODS

  • Successful efforts and full cost accounting
  • Interests Accounts (i.e. royalty, working interest, overriding royalty interest)
  • Classification and Treatment of costs
  • Acquisition and Retention Costs
  • Exploration and Development Costs
  • Amortization of Proved Property Costs
  • Disposition of Oil & Gas Assets
  • Impairment of Oil & Gas Assets
  • Asset Retirement Obligations
  • Revenues and Production Costs
  • DD&A rules

MINIMIZE RISK AND MONETIZE THE OPPORTUNITY IN STRATEGIC INVESTMENTS

  • Options in Exploration & Production (E&P)
  • Option to Delay (Timing Option)
  • Abandonment Option
  • Option to Expand the Production
  • Types of Uncertainties in E&P
  • Technical Uncertainty
  • Economic/Market Uncertainty
  • Strategic Uncertainty
  • Revelation of the true value
  • Valuation of Exploratory Prospect
  • Prospect Valuation and Revelation
  • Prospect Valuation under Uncertainty

REAL OPTION MINDSET

  • Valuation is as Real Options Mindset
  • Real Options as a Series of Decisions
  • Applications of Real Options Mindset
  • Real Options: Change the perception of value
  • Linking Value Assessment to Signposts/ Actions to Deliver the Value
  • Metrics vs Decision Criteria

UNDERSTANDING INDONESIA PSC ECONOMICS

  • Interpret Indonesia PSC Project economics
  • Optimize expenditures through economic advantages
  • Value Risks Management along Project Life Cycle
  • PSC Cash Flow mechanism
  • PSC Term & Incentives: FTP;Cost recovery; DMO; Bonuses, Tax
  • Workshop/Exercises Entitlement Calculation
  • Incentives and how does it work (Investment credit, DMO Holiday, ICR)
  • Incentives for Marginal and brown field, EOR / water flood, new field and green field)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Petroleum Engineering Economics and Risk Analysis

 

Petroleum Engineering Economics and Risk Analysis

Category:
Petroleum / Oil & Gas

Tanggal
20-23 Juli 2010

Jam Pelaksanaan
09.00-17.00 WIB

Tempat
Jayakarta Hotel
Bandung

Pembicara / Fasilitator
Prof. DR. Ir. Widjajono Partowidagdo, M.Sc

Harga
Rp.7.250.000,-
per participant, excluding accommodation & tax.

COURSE OBJECTIVE
Economic analyses that primarily involve engineering and technical projects commonly are called engineering economic studies or engineering economics. Petroleum business is just like other business which is aimed to make profit. Profit is a function of production, price, costs and government take (tax and non tax) and minimum return. To maintain production, any business needs to maintain stock. Stock in Petroleum Business is proven reserves. Petroleum business is a risky business.
To understand Petroleum Engineering Economics needs knowledge of petroleum proven reserve and production, price, costs, government take, contractor profit, minimum return and risks of Petroleum Business.

COURSE CONTENT

  • Dynamics of Petroleum Business
  • Petroleum Reserves and Production
  • Methods to Measure Profit Indicators
  • Selections among Alternatives
  • Government Take from Tax and non Tax
  • Cost Estimation
  • Pricing
  • Incentives
  • Risk Management and Decision Making
  • Petroleum Contract in Indonesia

PARTICIPANTS

  • Engineers and Staff (Production, Operations, Facilities, Reservoir, Petroleum, Optimization, Design, Construction, and Maintenance)
  • Geoscientists (Geologists, Geophysicists, and Petro physicists)
  • Non Engineers (Accounting, Finance, Legal, Planning, Support)
  • Team Leaders, Supervisors, Superintendents, and Managers
  • Anybody who wish to know Petroleum Engineering Economic

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

PENGENALAN OPERASI PEMBORAN

Jadwal Training

PENGENALAN OPERASI PEMBORAN Tanggal 7-8 JULI 2010 Jam Pelaksanaan 09.00 – 16.00 WIB Tempat Estubizi Business Center Setiabudi Building 2 Lantai 1 Jl.HR.Rasuna Said Kuningan,Jakarta ... Baca Selengkapnya

PENGENALAN OPERASI PEMBORAN

 

PENGENALAN OPERASI PEMBORAN

Tanggal
7-8 JULI 2010

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Estubizi Business Center
Setiabudi Building 2 Lantai 1
Jl.HR.Rasuna Said
Kuningan,Jakarta selatan

Mercantile Athletic Club
WTC building lt.18
Jl.Jend.Sudirman Kav.29-31
Jakarta

Pembicara / Fasilitator
SALEH KAHARNOKO
Praktisi di bidang Pemboran di Perusahaan Oil And Gas

Harga
Rp.3.000.000,-

MAKSUD DAN TUJUAN :

  1. MEMBERIKAN PENGETAHUAN TENTANG OPERASI PEMBORAN SECARA UMUM
  2. MEMBERIKAN PEMAHAMAN TENTANG PROSES PEKERJAAN PEMBORAN
  3. MEMBERIKAN PENGETAHUAN TENTANG MASALAH YANG TERJADI DALAM OPERASI PEMBORAN
  4. MEMBERIKAN PENGETAHUAN TENTANG PERALATAN YANG DIGUNAKAN DALAM OPERASI PEMBORAN
  5. MEMBERIKAN SIAPA SAJA YANG TERLIBAT DALAM OPERASI PEMBORAN

MATERI TRAINING :
Materi Sesi Ke 1

  1. PENGENALAN ALAT PEMBORAN
  2. FUNGSI ALAT-ALAT PEMBORAN
  3. KELENGKAPAN ALAT YANG HARUS DISEDIAKAN DALAM PEMBORAN
  4. PERALAAN PENDUKUNG PEMBORAN
  5. MAINTENANCE DARI PERALATAN PEMBORAN

Materi Sesi Ke 2

  1. PERSIAPAN MOBILISASI ALAT PEMBORAN
  2. PERSIAPAN TAJAK SUMUR
  3. PERSIAPAN MASUK PIPA SELUBUNG
  4. PROSES PENYEMENAN
  5. PEMASANGAN BLOW OUT PREVENTER (BOP)
  6. PENGETESAN PIPA SELUBUNG DAN FORMASI SEBELUM DILAKUKAN PEMBORAN
  7. PROSES PEMBORAN

Metode Pengajaran :
Kuliah singkat, tanya jawab, diskusi kelompok, perorangan dan individual exeecise dan studi kasus

Wajib diikuti oleh
Para karyawan Operasi dan Non Operasi Pemboran & Para Karyawan yang Terlibat Dalam Support Operasi

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

NATURAL GAS PROCESS AND INSTRUMENTATION – PASTI JALAN

 

NATURAL GAS PROCESS AND INSTRUMENTATION – PASTI JALAN !

Tanggal
2-5 Agustus 2010

Jam Pelaksanaan
09.00 – 16.30

Tempat
Hotel Ibis Malioboro
Yogyakarta

Pembicara / Fasilitator
Dr.Ir. Sudjati Rachmat, DEA
DR. Ir. Sudjati Rachmat, DEA is General Manager of Program Development Department of ITB. He was an extreme dedicated consultant and researcher with countless hands-on expertise in analytical methods, engineering mathematics, computer simulation, fluid mechanic, mass and heat transfer. Mr. Sudjati has published numerous articles regarding of researches and analyses in France, Australia, USA and Singapore.
His expertise has brought him to one of the top-notch expert hired among UNOCAL, MOBIL OIL Indonesia, PPTM Migas, PT. CALTEX Pacific Indonesia, LEMIGAS, PT. LNG Bontang, VICO Indonesia, GULF, ARCO and PERTAMINA. He is an active member of SPE [Society of Petroleum Engineers] and Fine Particles Society, US. He holds Diplome d’Etude Approfondie and Docteur en Mecanique de Fluide in Methode Numerique from UCB, France.

Harga
Rp 6.950.000/Peserta

FASILITAS PELATIHAN :
Setiap peserta akan memperoleh ‘Certificate of Accomplishment’, Gandaan Materi baik hardcopy (makalah) maupun softcopy (CD Materi), dan konsumsi (makan siang dan 2xmeals).

Materi
OBJECTIVES :
After participate in this course, the participants will be able and capable to :

  • Understand the basic concept of gas handling processes and operation, and how to operate this technology in field application.
  • Diagnostic of gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of gas handling processes, operation and Instrumentation.

COURSE OUT-LINE:
• Introduction to Gas Process and Operation

• Gas Properties
Ideal gas
Real Gas

• Gas Formation Volume Factor
Gas Compressibility
Gas-Water System
Gas-Condensate System

• Gas Reservoir Performance
Reservoir Gas Flow
Gas Reserves
Well Completion Effect
Tight Gas Well
Gas Well Testing

• Gas Piping System
Basic Flow Equation
Flow in Wells and Flow in Pipelines
Effect of Liquids
Use of Pressure Traverse Curve
Liquid Removal from Gas Wells

• Gas Compression
Type of Compressors
Compressor Design
Centrifugal Compressor

• Total System Analysis
Tubing and Flow Line Effect
Separator Pressure Effect
Compressor Selection

• Flow Measuring
Orifice Metering
Metering System Design
Other Metering Methods

• Gas Condensate Reservoir
Well Testing and Sampling
Gas Cycling

• Field Operation Problems
Pressure Cumulative Production Plot
Hydrate Formation
Sour Gas Production
Corrosion Control With Inhibitors
Sulfur Deposition

• Gas Processing
Field treatment of Natural Gas
Gas Plant Operation
Gas Dehydration
Gas Sweetening

AUDIENCE:
No specified (Operator/ Sr. Operator/Engineer or Non Engineer)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

2024

informasi-seminar.com | infoseminar.co.id