Material Safety Data Sheets (MSDS) BANDUNG

Jadwal Training

Material Safety Data Sheets (MSDS) BANDUNG OVERVIEW: A material safety data sheet (MSDS) is a form containing data regarding the properties of a particular substance. ... Baca Selengkapnya

Material Safety Data Sheets (MSDS) BANDUNG

Jadwal Training

Material Safety Data Sheets (MSDS) BANDUNG

OVERVIEW:
A material safety data sheet (MSDS) is a form containing data regarding the properties of a particular substance. An important component of product stewardship and workplace safety, it is intended to provide workers and emergency personnel with procedures for handling or working with that substance in a safe manner and include information such as physical data (melting point, boiling point, flash point,etc),toxicity, health effect, first aid, reactivity, storage, disposal, protective equipment, and spill handling procedures. The exact format of an MSDS can vary from source to source within a country depending on how specific is the national requirement.

WHO SHOULD ATTEND THIS TRAINING?:

  • Those responsible for managing MSDS
  • Individuals designing handling or working with chemical substances
  • Inspector LK3
  • HSE Manager/ Engineer/ Supervisor
  • The other person who interested in

TRAINING OBJECTIVES:

  • Provides detailed information on chemical properties, hazards and protective measures
  • Provides required for all hazardous chemicals
  • Provides MSDS readily available to employees

TRAINING MATERIAL OUTLINE:

  1. Identification of the chemical and its supplier
  2. Hazard(s) Identification
  3. Composition/Information on Ingredients
  4. First-Aid Measures
  5. Fire-Fighting Measures
  6. Accidental Release Measures
  7. Handling and Storage
  8. Exposure Controls/Personal Protection
  9. Physical and Chemical Properties
  10. Stability and Reactivity
  11. Toxicological Information
  12. Ecological Information (non-mandatory)
  13. Disposal Considerations (non-mandatory)
  14. Transport Information (non-mandatory)
  15. Regulatory Information (non-mandatory)
  16. Other Information, including date of MSDS preparation or last revision

INSTRUCTOR : Bambang Pamudji, Bsc. SE. and Team

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION :
2 days

TRAINING TIME :
18 Jan 2023-19 Jan 2023
15 Feb 2023-16 Feb 2023
06 Mar 2023-07 Mar 2023
05 Apr 2023-06 Apr 2023
08 May 2023-09 May 2023
21 Jun 2023-22 Jun 2023
19 Jul 2023-20 Jul 2023
10 Aug 2023-11 Aug 2023
20 Sep 2023-21 Sep 2023
18 Oct 2023-19 Oct 2023
06 Nov 2023-07 Nov 2023
20 Dec 2023-21 Dec 2023

INVESTMENT PRICE/PERSON :

1. Rp. 4.500.000/person (full fare) or
2. Rp. 4.250.000/person (early bird, payment 1 week before training) or
3. Rp. 3.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Bambang Pamudji, B.Sc.,SE. has much real experiences, he is former Senior Health and Safety staff at PT. Pupuk Sriwidjaja,PUSRI(Urea Fertilizer Manufacturer) Palembang. He was born in Pasuruan East Java, 14 March 1950. He got his B.Sc in Public Health from APK Surabaya in 1971 and was graduated from Economic Management Sriwidjaja University, UNSRI, Palembang in 1996. He has certificates in Health, Safety, and Environment (HSE) from Depnakertrans RI/Institutions and Universities in Indonesia, institutions and Universities in UK, and National Safety Council. Experienced in setting up Health and Safety Management System documentation and its application. Experienced internal lead auditor SMK3 in PT. Pupuk Sriwidjaja, and External lead auditor SMK3 for Indonesian Association Fertilizer Producer. He has been teaching industrial training classes for many classes related to topics of his competencies, HSE. Many participants from many companies in Indonesia have participated in his training classes.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Advanced Maintenance Management (BANDUNG)

Jadwal Training

Advanced Maintenance Management (BANDUNG) TRAINING TIME : 09 Jan 2023-12 Jan 2023 06 Feb 2023-09 Feb 2023 13 Mar 2023-16 Mar 2023 10 Apr 2023-13 ... Baca Selengkapnya

Advanced Maintenance Management (BANDUNG)

Jadwal Training

Advanced Maintenance Management (BANDUNG)

TRAINING TIME :

09 Jan 2023-12 Jan 2023
06 Feb 2023-09 Feb 2023
13 Mar 2023-16 Mar 2023
10 Apr 2023-13 Apr 2023
15 May 2023-18 May 2023
19 Jun 2023-22 Jun 2023
10 Jul 2023-13 Jul 2023
21 Aug 2023-24 Aug 2023
11 Sep 2023-14 Sep 2023
09 Oct 2023-12 Oct 2023
13 Nov 2023-16 Nov 2023
18 Dec 2023-21 Dec 2023

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

LATAR BELAKANG:
Sebagai pilar pertama, yang memusatkan pada masalah logistik dan strategis dengan momentum pada kemajuan moral terutama jajaran manajemen dan staf dalam bentuk gerakan gugs mutu, gerakan zero defect, total productive maintenance, dan sebagainya. Dengan semakin kompleksnya pekerjaan perawatan, tuntutan kualitas pekerjaan perawatan, tuntutan waktu penyelesaian pekerjaan perawatan untuk menjamin ketersediaan mesin dan peralatan secara optimum pada saat mesin digunakan, kebutuhan informasi yang dapat menunjang pekerjaan perawatan, membantu menciptakan kondisi kerja yang aman dan tertib, metoda evaluasi yang berguna dalam pengawasan perawatan, dan optimisasi ongkos perawatan, sehingga diperlukan manajemen perawatan. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Manajemen Perawatan Lanjut.

TUJUAN:
Membekali peserta tentang wawasan dan pengetahuan mengelola suatu sistem yang merupakan gabungan antara teknologi perawatan dengan elemen-elemen pemroses informasi tentang perencanaan, disain, proses pembuatan, pengendalian, manajemen, dan operasi untuk tuntutan kualitas pekerjaan perawatan.

SASARAN:
Setelah mengikuti pelatihan ini, peserta diharapkan mampu:

  • Memahami dan menjelaskan konsep dasar perawatan
  • Menjelaskan tingkatan tugas dan fungsi perawatan
  • Menjelaskan filosofi supply chain perawatan
  • Menjelaskan perencanaan dan penjadwalan perawatan
  • Menjelaskan konsep reliabilty centered maintenance
  • Menjelaskan konsep total prodcutive maintenance

CAKUPAN MATERI PELATIHAN:

  1. Basic and aspect technique of maintenance
    Pengertian, tujuan, dan perkembangan perawatan, kerusakan dan sumber utama kerusakan, pola kerusakan mesin dan pencegahannya, dampak adanya perawatan, dan fungsi teknologi dalam perawatan.
  2. Maintenance management & organization, and implementation
    Pengertian manajemen perawatan, aspek-aspek manajemen perawatan, prosedur perawatan, organisasi kerja bidang perawatan (arti organisasi, struktur organisasi, bentuk-bentuk organisasi, contoh organisasi perawatan).
  3. Maintenance planning
    Definisi dan faktor-faktor penunjang, kendala yang muncul, langkah-langkah penyusunan, dan kebijakan perencanaan perawatan, klasifikasi, persiapan, dan prinsip perencanaan perawatan, tahapan perencanaan pekerjaan perawatan, perencanaan tenaga kerja perawatan, diagram alir pekerjaan perawatan, dan standar perencanaan perawatan.
  4. Inspection activity in maintenance
    Tujuan inspeksi, faktor inspeksi, acuan inspeksi, laporan inspeksi, klasifikasi inpseksi, inspeksi harian, contoh inspeksi.
  5. Computerized of maintenance activity
    • Definisi dan faktor-faktor penunjang, kendala yang muncul, langkah-langkah penyusunan, dan kebijakan perencanaan perawatan, klasifikasi, persiapan, dan prinsip perencanaan perawatan, tahapan perencanaan pekerjaan perawatan, perencanaan tenaga kerja perawatan, diagram alir pekerjaan perawatan, dan standar perencanaan perawatan.
    • Pengertian, tujuan, dan prinsip dasar penjadwalan, pengelompokkan penjadwalan perawatan, dan dasar penjadwalan pekerjaan perawatan.
  6. Managing spare parts & warehouse
    • Manajemen suku cadang: klasifikasi suku cadang, prinsip suku cadang, matrik penyediaan suku cadang, administrasi suku cadang, penentuan kebutuhan suku cadang, persediaan suku cadang,
    • Manajemen pergudangan: pergerakan material, pengertian pergudangan dan gudang, fungsi dan tanggung jawab gudang, bentuk dan peran gudang, tugas pergudangan, alasan perlunya manajemen pergudangan, ukuran unjuk kerja pergudangan, prinsip manajemen pergudangan, administrasi pergudangan, perencanaan kapasitas gudang,
    • Pengendalian kualitas barang masuk gudang
  7. Procedure to managing budget
    Lingkup biaya perawatan, klasifikasi biaya perawatan, sudut pandang pengurangan biaya perawatan, tindakan pengurangan biaya perawatan, aspek penyusunan biaya perawatan, pertimbangan penyusunan biaya perawatan, estimasi biaya dan penyusunan anggaran perawatan, dan perhitungan biaya perawatan total.
  8. Data collection aspects in maintenance
    The concept TPM, The rule of TPM, The component of TPM and organization for TPM, Maximizing equipment effectiveness, TPM small and group activity, Implementation and Developing TPM.
  9. Concept of predictive maintenance
    The concept TPM, The rule of TPM, The component of TPM and organization for TPM, Maximizing equipment effectiveness, TPM small and group activity, Implementation and Developing TPM.

PESERTA:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang teknologi perawatan mesin pada industri rekayasa.

INSTRUCTOR :    Ir. Sugeng Isdwiyanudi, MT.   and Team

INVESTATION PRICE/PERSON :

  • Rp. 8.500.000/person (full fare) or
  • Rp. 8.250.000/person (early bird, payment 1 week before training) or
  • Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Project Management (BANDUNG)

Jadwal Training

Project Management (BANDUNG) Tanggal 10 Jan 2023-13 Jan 2023 07 Feb 2023-10 Feb 2023 21 Mar 2023-24 Mar 2023 10 Apr 2023-13 Apr 2023 23 ... Baca Selengkapnya

Project Management (BANDUNG)

Jadwal Training

Project Management (BANDUNG)

Tanggal

10 Jan 2023-13 Jan 2023
07 Feb 2023-10 Feb 2023
21 Mar 2023-24 Mar 2023
10 Apr 2023-13 Apr 2023
23 May 2023-26 May 2023
20 Jun 2023-23 Jun 2023
11 Jul 2023-14 Jul 2023
29 Aug 2023-01 Sep 2023
12 Sep 2023-15 Sep 2023
10 Oct 2023-13 Oct 2023
21 Nov 2023-24 Nov 2023
19 Dec 2023-22 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

LATAR BELAKANG:
Manajemen adalah proses merencanakan, mengorganisasikan, memimpin, dan mengendalikan usaha-usaha anggota organisasi, serta proses penggunaan sumber daya organisasi untuk mencapai tujuan-tujuan organisasi yang sudah ditetapkan. Suatu rangkaian kegiatan dapat dibedakan atas kegiatan rutin dan kegiatan proyek. Kegiatan proyek adalah suatu rangkaian kegiatan yang hanya satu kali dilaksanakan dan umumnya berlangsung dalam jangka waktu yang relatif pendek, sehingga mempunyai awal dan akhir kegiatan yang jelas serta hasil kegiatan yang bersifat unik. Kendala-kendala yang selalu terlibat dalam proyek-proyek biasanya berhubungan dengan persyaratan kinerja (performance), waktu penyelesaian, batasan biaya, mutu atau kualitas dan metoda pengerjaan, dan keselamatan kerja. Selain itu, manajemen yang baik menuntut efisiensi, yaitu diharapkan bahwa seorang pelaksana akan melaksanakan dan menyelesaikan suatu proyek sedemikian rupa sehingga jumlah sumber daya yang digunakan dalam pelaksanaan proyek tersebut menjadi minimum. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Manajemen Proyek.

TUJUAN:
Membekali peserta tentang wawasan dan pengetahuan mengelola (manajemen) suatu rangkaian kegiatan yang dilaksanakan dalam jangka waktu pendek.

SASARAN TRAINING:
Setelah mengikuti pelatihan ini, peserta diharapkan mampu:

  1. Memahami dan menjelaskan manajemen dan manajemen proyek
  2. Menjelaskan pengendalian mutu
  3. Menjelaskan pengendalian mutu pelaksanaan proyek
  4. Menjelaskan mekanisme pengawasan proyek
  5. Menjelaskan pembuatan dokumentasi proyek.

CAKUPAN MATERI TRAINING:

  1. Pendahuluan
    Manajemen (pengertian, unsur, proses, kegiatan manajemen), manajemen proyek (pengertian, tahapan kegiatan, pihak yang terlibat, organsasi proyek, tipe organisasi proyek).
  2. Pengendalian mutu
    Pengertian (jaminan mutu, manajemen mutu, sistem mutu), pekerjaan yang terkait dengan pengendalian mutu, proses pengendalian mutu, alas an dilakukan pengendalian mutu, manfaat dan hambatan pengendalian mutu, langkah-langkah pengendalian mutu, kegiatan pengendalian mutu, spesifikasi pengendalian mutu
  3. Pengendalian mutu pelaksanaan proyek
    Ciri proyek yang sukses, konsep dasar pengendalian proyek, lingkup dan acuan dasar pengendalian proyek, proses pengendalian proyek, proses pemantauan, pengukuran dan evaluasi kemajuan pekerjaan, tindakan perbaikan, perencanaan dan pengendalian proyek (sistem informasi dalam pengendalian, metoda evaluasi dan pengendalain).
  4. Mekanisme pengawasan proyek
    Ruang lingkup pekerjaan pengawas proyek, acuan kerja pengawas proyek, kendala pekerjaan proyek, pengawasan terhadap konsultan pengawas, kasus khusus.
  5. Dokumentasi proyek
    Dokumen tahap disain, dokumen tahap pengadaan barang dan jasa, dokumen tahapan pelaksana proyek, dokumen penutupan proyek

SASARAN PESERTA :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang pengelola (manajemen) proyek pada industri rekayasa.

INVESTMENT/ PERSON :

1. Rp. 8.500.000/peserta (bayar penuh) atau
2. Rp. 8.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
3. Rp. 7.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Ating Sudradjat,MSc. adalah alumnus Teknik Industri ITB Bandung. Beliau adalah dosen Teknik Mesin di Politeknik ITB(POLBAN). Untuk mempertajam kemampuannya beliau sudah pernah terjun ke lapangan/perusahaan secara langsung, seperti Chief Technician di PT pamindo tiga t Jakarta selama 5 tahun, lalu menjadi Technical Manager di CV karya mandiri Bandung. Beliau juga pernah menjadi dosen di Polytechnic Education Development Center selama 11 tahun. Menjadi Technical Director di PT Pinangmas Energi Cakrawala Jakarta. Lalu di Cakrawala Optimus Explorer Bandung. Consultant & Trainer pada beberapa lembaga diantaranya di PT.MMS dan Logistic System di PT WKM. Beliau sudah sering mengajar pelatihan untuk perusahaan di Indonesia di bidang topik keahlian beliau diantaranya tentang material handling, maintenance, database system for Mechanical Engineering, Planning and Scheduling Maintenance dan lain-lain. Melalui pelatihan/training beliau akan sharing pengalaman dan kemampuan akademis beliau kepada peserta pelatihan.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Piping System Material Design And Maintenance

Jadwal Training

Piping System Material Design And Maintenance Program pelatihan ini memberikan gambaran tentang piping system, design, dan sistem perawatan secara umum. Sehingga setelah mengikuti pelatihan ini ... Baca Selengkapnya

Piping System Material Design And Maintenance

Jadwal Training

Piping System Material Design And Maintenance

Program pelatihan ini memberikan gambaran tentang piping system, design, dan sistem perawatan secara umum. Sehingga setelah mengikuti pelatihan ini peserta mampu merencanakan suatu piping system sederhana, lengkap dengan instrumennya, melaksanakan penggambaran, menetapkan material yang tepat serta dapat melakukan perawatan yang benar.

TRAINING MATERIAL OUTLINE:

  1. Pengetahuan dasar Perpipaan.
  2. Peralatan yang berhubungan dengan perpipaan
  3. Sistem Perpipaan
  4. Perencanaan Penggambaran perpipaan dan diagram instrumen
  5. Perencanaan penggambaran isometrik
  6. Dasar-dasar dari sistem perawatan
  7. Perakitan dan pembongkaran dalam perawatan
  8. Pengukuran dan Penyimpanan
  9. Kegagalan dan kerusakan
  10. Jenis perakitan

WHO SHOULD ATTEND THIS TRAINING?:

  1. Managerials
  2. Professionals
  3. Plant Maintenance / Operators / Supervisor / Superintendent

INSTRUCTOR : Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION : 4 days

TRAINING TIME : 

10 Jan 2023-13 Jan 2023
07 Feb 2023-10 Feb 2023
07 Mar 2023-10 Mar 2023
10 Apr 2023-13 Apr 2023
09 May 2023-12 May 2023
13 Jun 2023-16 Jun 2023
11 Jul 2023-14 Jul 2023
22 Aug 2023-25 Aug 2023
12 Sep 2023-15 Sep 2023
10 Oct 2023-13 Oct 2023
07 Nov 2023-10 Nov 2023
12 Dec 2023-15 Dec 2023

INVESTMENT PRICE/PERSON :

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

HSE Management System (BANDUNG)

Jadwal Training

HSE Management System (BANDUNG) Sistem Manajemen K3LL (Keselamatan, Kesehatan Kerja & Lindungan Lingkungan) INTRODUCTION : Pada periode 1970 – 1980 an diberbagai industri/perusahaan di Indonesia ... Baca Selengkapnya

HSE Management System (BANDUNG)

Jadwal Training

HSE Management System (BANDUNG)

Sistem Manajemen K3LL (Keselamatan, Kesehatan Kerja & Lindungan Lingkungan)

INTRODUCTION :
Pada periode 1970 – 1980 an diberbagai industri/perusahaan di Indonesia terdapat departemen atau bagian yang bernama Fire & Safety ( F&S ), ada lagi yang bernama PAK (Pemadam Api & Keselamatan), S & S (Safety & Security). Kemudian pada periode 1980 – 1990 an : LPD (Loss Prevention Department), LPED (Loss Prevention & Environment Department), ELC (Environment & Loss Control), ELP (Environment & Loss Prevention) dan lain sebagainya. Selanjutnya pada periode 1990 an sampai dengan sekarang dikenal dengan nama HSE (Health, Safety & Environment). Pada periode inilah istilah HSE menjadi populer baik secara nasional maupun internasional, malahan menjadi program/target utama setiap perusahaan (company/user) karena setiap perusahaan tidak menginginkan terjadinya kecelakaan kerja, penyakit akibat kerja, kerusakan peralatan maupun gangguan/kerusakan lingkungan dan terganggunya proses operasional perusahaan. Kemudian HSE juga merupakan persyaratan utama dan pertama yang harus dipenuhi terlebih dahulu oleh setiap perusahaan jasa/kontraktor/mitra kerja (service company/contractors/business partners) yang akan ikut tender kontrak/proyek disuatu company/user/contract owner, bila persyaratan HSE yang ditentukan oleh company/user/contract owner tersebut bisa dipenuhi oleh para perusahaan jasa/kontraktor/mitra kerja, maka mereka diikutkan dalam proses tender selanjutnya, tetapi bila tidak bisa dipenuhi maka mereka tidak diikutkan dalam proses tender tersebut.

TRAINING OBJECTIVE :

  1. Para peserta pelatihan/kursus akan mengetahui, mengerti/memahami dan menerapkan HSE di unit kerjanya masing-masing, termasuk peraturan-perundangan dari Pemerintah Republik Indonesia tentang HSE dan standar-standar nasional maupun internasional dan ”Best Practices” tentang HSE.
  2. Para peserta pelatihan/kursus bisa berperan aktif membantu perusahaan dalam mencegah dan mengurangi terjadinya kerugian-kerugian ( losses ) terhadap orang/pegawai, peralatan/perlengkapan, bahan/material dan lingkungan, atau secara internasional dikenal dengan nama/istilah PEME (People, Equipment, Materials, Environment).
  3. Bagi para peserta yang berasal dari perusahan-perusahaan jasa (Services Company) yang akan ikut tender proyek pada perusahaan-perusahaan (Company) yang sudah ’HSE World Class Company’, maka para peserta akan bisa menyiapkan dokumen-dokumen HSE yang dipersyaratkan oleh Company tersebut (Pre-Qualification Process) sehingga perusahaan jasa ini bisa ikut tender proyek-proyek di Company tersebut.
  4. Para peserta pelatihan/kursus dapat mengetahui standar HSE dilingkungan Migas dan cara penerapannya pada saat melakukan verifikasi/inspeksi diperusahaan Migas.

TRAINING MATERIAL OUTLINE :

  1. Peraturan Perundangan HSE dari Pemerintah RI
  2. Prinsip-Prinsip Dasar Manajemen Pengendalian Rugi (Loss Control Management)
  3. Sistem Manajemen HSE Berdasarkan OHSAS 18001:2007 dan ISO 14001:2004
  4. HSE Manual of Various Industries
  5. Contractor HSE Management System
  6. HSE Auditing System
  7. HSE Passport
  8. HSE Hazard Identification, Risk Assessment & Risk Control
  9. HSE Hazard Observation Techniques
  10. Standar-Standar Nasional, Internasional dan Best-Practices tentang HSE
  11. Pemutaran Film-Film/VCD tentang HSE
  12. Studi-Studi Kasus tentang HSE
  13. Pre-Course Assessment (Pre-Test) & Post-Course Assessment (Post-Test)

WHO SHOULD ATTEND :
Para Manager, Superintendent, Supervisor, Consultant, Auditor dan Trainer dari berbagai SBU/Divisi/Departemen berbagai jenis perusahaan (Migas dan Panas Bumi, Pertambangan Umum, Petrokimia, BUMN, Perusahaan2 Jasa/Services Company dan lain sebagainya).

INSTRUCTOR :Ir. Didi Sugandi, Bc. M and Team

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION :   4 days

TRAINING TIME :

10 Jan 2023-13 Jan 2023
07 Feb 2023-10 Feb 2023
07 Mar 2023-10 Mar 2023
10 Apr 2023-13 Apr 2023
09 May 2023-12 May 2023
13 Jun 2023-16 Jun 2023
11 Jul 2023-14 Jul 2023
08 Aug 2023-11 Aug 2023
12 Sep 2023-15 Sep 2023
10 Oct 2023-13 Oct 2023
07 Nov 2023-10 Nov 2023
12 Dec 2023-15 Dec 2023

INVESTMENT PRICE/PERSON :

  • Rp 8.750.000/person (full fare) or
  • Rp 8.500.000/person (early bird, payment 1 week before training) or
  • Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Didi Sugandi,Bc.M was born inBandung August 21, 1950. He studied at Akademi Minyak dan Gas Bumi (AKAMIGAS)/ Oil & Natural Gas Academy, Cepu, Central Java (1973-1977), graduated as Bachelor of Petroleum Engineering (Bakaloreat Minyak or Bc. M), under sponsorship or study assignment of PT Stanvac Indonesia and he also studied at University of Pembangunan Nasional (UPN) Veteran, Yogyakarta (1986-1991), graduated as Petroleum Engineer (Ir.), under sponsorship or study assignment of Huffco/VICO Indonesia. His work experiences is 39 years in oil and gas companies and 1 year in geothermal, detailly as follows:

  1. 1970 – 1981 : PT Stanvac Indonesia Pendopo, South Sumatera (Production Dept., Study Assignment at AKAMIGAS Cepu, Safety & Equipment Inspection Dept.)
  2. 1981 – 1997 : Huffco / VICO Indonesia, East Kalimantan (Production Dept., Manpower Planning & Development, Study Assignment at UPN Veteran Yogyakarta, Production Dept., Loss Prevention & Environment Dept./LPED, HSE System Dept.)
  3. 1997 – 1998 : Karaha Bodas Company (KBC-Geothermal Drilling Project, Garut, West Java, HSE Dept.) & Sumitomo Corporation (Geothermal Power Plant Construction Project, Pangalengan, West Java, HSE Dept.)
  4. 1999 – 2002 : JOB Pertamina-Gulf Resources, Jambi, Sumatera, HSE Dept. (under contract services of SUCOFINDO Main Office Jakarta & PT Guna Persada Engineering)
  5. 2003 – now : Caltex/Chevron Pacific Indonesia (CPI), Riau, Sumatera, HES Management System Audit Project in Drilling & Wellwork Operations (under contract services of PT Surveyor Indonesia – Pekanbaru)

Chronology of Job Position’s Career of Ir. Didi Sugandi,Bc.M is as follows:

Helper (2 years) à Prod. Operator III (1 year) à Study Assignment at AKAMIGAS Cepu (3   yrs) à Prod. Technician I ( 1.5 yrs) à Safety & Fire Protection Supv. (3.5 yrs) à Asst. Prod. Supv. (2 yrs) à Prod. Supv. (2 yrs) à Sr. Prod. Supv. (2 yrs) àStudy Assignment at UPN Veteran (4.5 yrs) àHead Prod. Supv. (1 year) àProd. Superintendent (2 years) à Loss Prev. & Env. Dept. Head (3 yrs) à HSE Superintendent (1 year) à Safety Manager (1 year) à Sr. Manager HSE (1 year) à HSE Advisor ( 2 yrs) à Continuous Drilling Safety Audit Coordinator (3.5 yrs) à Drilling & Completion Safety Management System Audit Coordinator (3.5 years).

Starting from 1992 till now (in his offschedule of work), Ir. Didi Sugandi,Bc.M being trainer,consultant, auditor and specialist on HSE topics for many companies in Indonesia.

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Mechatronics Application In Industry (BANDUNG)

Jadwal Training

Mechatronics Application In Industry (BANDUNG) Tanggal 10 Jan 2023-13 Jan 2023 07 Feb 2023-10 Feb 2023 27 Mar 2023-30 Mar 2023 10 Apr 2023-13 Apr ... Baca Selengkapnya

Mechatronics Application In Industry (BANDUNG)

Jadwal Training

Mechatronics Application In Industry (BANDUNG)

Tanggal

10 Jan 2023-13 Jan 2023
07 Feb 2023-10 Feb 2023
27 Mar 2023-30 Mar 2023
10 Apr 2023-13 Apr 2023
29 May 2023-01 Jun 2023
06 Jun 2023-09 Jun 2023
11 Jul 2023-14 Jul 2023
08 Aug 2023-11 Aug 2023
12 Sep 2023-15 Sep 2023
10 Oct 2023-13 Oct 2023
27 Nov 2023-30 Nov 2023
05 Dec 2023-08 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

PENDAHULUAN :
Tidak semua hal bisa dilakukan manusia dengan nilai yang efektif, efisien, dan aman. Oleh karena itu, penggunaan dan penguasaan bidang mekatronika adalah sebuah keniscayaan. Perkembangan industri (industri power plant, industri otomotif, industri farmasi, industri permesinan untuk proses otomasi, atau industri-industri yang menghendaki tenaga perawatan alat-alat produksinya atau bahkan industri jasa/servis peralatan mekanis/otomatis) menuntut tersedianya sumber daya manusia yang menguasai teknologi otomatisasi alias robotic system atau mechatronic.

Mobil ada mekanik, pesawat, kipas angin, AC, dsb., semua ada kemampuan otomatisnya. Teknologi tersebut merupakan pengembangan teknologi yang terintegrasi meliputi Medical Technology, CNC Technology dan Renewable Energy yaitu yang disebut dengan Teknik Mekatronika. Mekatronika, singkatan dari mekanik dan elektronika, suatu bidang khusus yang membahas mengenai otomasi, kini kian dibutuhkan. Namun dalam perkembangannya mempunyai cakupan yang lebih luas yaitu, suatu bidang yang mengintegrasikan teknik mesin, elektronika, perangkat keras dan perangkat lunak komputer, komunikasi, ilmu bahan, mikroelektronika, juga kecerdasan buatan.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Mekatronika. Training ini didesain untuk menjembatani kebutuhan perusahaan untuk mencapai kebutuhan pemenuhan tenaga kerja yang memahami mekatronika dengan baik.

CAKUPAN MATERI TRAINING :
1. Mekanik :
a. Terminologi gerak : Perpindahan, kecepatan & percepatan
b. Terminologi energi : Gaya, usaha, daya
c. Sistem mekanis : Derajat kebebasan dan sumbu gerak

2. Listrik :
a. Kelistrikan : Tegangan , arus & hambatan
b. Sistem kontrol elektrik : Masukan, proses & keluaran elektrik

3. Elektronika :
a. Komponen pasif : Resistansi, kapasitansi, Induktansi
b. Komponen aktif : Semi konduktor, dioda & transistor
c. Sistem sinyal : Sinyal kontinyu dan diskrit

4. Penerapan sistem elektronik pada mekatronik:
a. Operator logik : AND, OR & NOT
b. Sistem bilangan : Desimal, biner, oktal & heksa
c. Enkoder & Dekoder
d. ADC dan DAC
e. Multiplekser dan Demultiplekser

5. Logika :
a. Tabel kebenaran, Aljabar Boolean & Carnaugh map

6. Penerapan konsep logik pada solid state controller elektrik & elektronik

7. Sensor:
a. Cara kerja sensor secara umum
b. Jenis dan fungsi sensor : Sensor kapasitif, induktif, optikal, magnetik.
c. Contoh penerapan sensor

8. Aktuator:
a. Jenis dan fungsi aktuator
b. Aktuator fluida : Pneumatik & hidrolik
c. Aktuator elektrik : Motor AC (1 phasa & 3 phasa) , Motor DC (brushed & Brushless)

9. Pengontrol/controller:
a. Unprogramable control : Elektrik & elektronik
b. Programmable control : µC, PC & PLC

10. PLC – Programmable Logic Control:
a. Pengawatan masukan-pengontrol-keluaran
b. Format pemrograman : STL, LAD & FBD

11. Algoritma pemrograman:
a. Gerakan berurutan (sequential)
b. Gerakan kondisional (conditional)
c. Gerakan berurutan dan kondisional
d. Kontrol panel : Start, stop, single/countinous function

12. Beberapa contoh pemrograman menggunakan Ladder simulator

13. Latihan dan Praktek 1:
a. Penggunaan beberapa jenis sensor
b. Pengawatan sensor-PLC-aktuator
c. Pemrograman dasar menggunakan LAD & FBD

14. Latihan dan praktek 2:
a. Penggunaan memori/flag
b. Pewaktu (timer) dan pencacah (Counter)

15. Penerapan 1. Stasiun pengumpan (Feeder station)

16. Penerapan 2. Stasiun Penyortiran (Sorting station)

HARGA INVESTASI/PESERTA :

1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified 
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Aris Suryadi, MT adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Production Optimization And Minimize Down Time (BANDUNG)

Jadwal Training

Production Optimization And Minimize Down Time (BANDUNG) Tanggal 09 Jan 2023-11 Jan 2023 06 Feb 2023-08 Feb 2023 27 Mar 2023-29 Mar 2023 12 Apr ... Baca Selengkapnya

Production Optimization And Minimize Down Time (BANDUNG)

Jadwal Training

Production Optimization And Minimize Down Time (BANDUNG)

Tanggal

09 Jan 2023-11 Jan 2023
06 Feb 2023-08 Feb 2023
27 Mar 2023-29 Mar 2023
12 Apr 2023-14 Apr 2023
29 May 2023-31 May 2023
26 Jun 2023-28 Jun 2023
10 Jul 2023-12 Jul 2023
14 Aug 2023-16 Aug 2023
11 Sep 2023-13 Sep 2023
09 Oct 2023-11 Oct 2023
27 Nov 2023-29 Nov 2023
27 Dec 2023-29 Dec 2023

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

INVESTATION PRICE/PERSON :

  • Rp 6.500.000/person (full fare)  or
  • Rp 6.250.000/person (early bird, payment 1 week before training) or
  • Rp 5.950.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Tas
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INTRODUCTION :
Production increase in maintenance could reduce downtime. Reduction down time automaticaly increase up time. Uptime used by operation to operation and maximaze production. This course will lead participants how to develop plan for uptime and operation effectiveness.

TRAINING OBJECTIVE :
After the course participanr will :

  1. Understand availabilty , maintainability, support abilityand productivity concept
  2. Ability to developing plan to Production Optimization and Minimize Down Time

TRAINING MATERIAL OUTLINE :

  1. Over all Effectiveness
  2. Productivity and availiability
  3. Increasing uptime and reduction downtime
  4. Minimize downtime with maintenance
  5. Material planning
  6. Maintainability
  7. Preparing production to maximized uptime
  8. Quality and process control
  9. Key performance indicator (productivity and maintenance)
  10. Case study

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

OPC (Open Process Control) BANDUNG

Jadwal Training

OPC (Open Process Control) BANDUNG Tanggal 24 Jan 2023-27 Jan 2023 21 Feb 2023-24 Feb 2023 13 Mar 2023-16 Mar 2023 10 Apr 2023-13 Apr ... Baca Selengkapnya

OPC (Open Process Control) BANDUNG

Jadwal Training

OPC (Open Process Control) BANDUNG

Tanggal

24 Jan 2023-27 Jan 2023
21 Feb 2023-24 Feb 2023
13 Mar 2023-16 Mar 2023
10 Apr 2023-13 Apr 2023
15 May 2023-18 May 2023
05 Jun 2023-08 Jun 2023
25 Jul 2023-28 Jul 2023
01 Aug 2023-04 Aug 2023
26 Sep 2023-29 Sep 2023
24 Oct 2023-27 Oct 2023
13 Nov 2023-16 Nov 2023
04 Dec 2023-07 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION:
OPC is a published industrial standard for system interconnectivity. It uses Microsoft’s COM and DCOM technology to enable applications to exchange data on one or more computers using a client/server architecture.  OPC defines a common set of interfaces. So applications retrieve data in exactly the same format regardless of whether the data source is a PLC, DCS, gauge, analyzer, software application or anything elses. As a result, OPC is as an out-of-the-box, plug and play communication solution. Provide a standards-based infrastructure for the exchange of process control data this leads to different connection type (serial, radio, ethernet, etc) and various operating system. In industrial automation systems:

  1. OPC standardizes the communication of process control data
  2. OPC standardizes on a technology rather than a product
  3. OPC provides true interoperability and scalability
  4. OPC reduces implementation time and costs

TRAINING OBJECTIVES:
You will be able to:

  1. Understand the concept of OPC
  2. Understand the OPC interface
  3. Use OPC
  4. Know communications in industrial automation
  5. Set-up and access to OPC
  6. Understand the use in industrial automation
  7. Integrate industrial automation systems

TRAINING MATERIAL OUTLINE :

  1. Introduction to OPC
  2. Configuration
  3. OPC and Instrumentation Integration
  4. OPC Technology
  5. KeepServer
  6. TOPSERVER
  7. OPC Server
  8. OPC Client
  9. Application development
  10. OPC Gateway
  11. OPC Connectivity
  12. OPC to PLC
  13. OPC to HMI
  14. Demonstration

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  1. Rp 8.500.000/person (full fare)  or
  2. Rp 8.250.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.  He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012).

He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Performance Analisys And Operating Of Induction Motor For Senior Operator and Junior Supervisor (BANDUNG)

Jadwal Training

Performance Analisys And Operating Of Induction Motor For Senior Operator and Junior Supervisor (BANDUNG) Tanggal 24 Jan 2023-27 Jan 2023 21 Feb 2023-24 Feb 2023 ... Baca Selengkapnya

Performance Analisys And Operating Of Induction Motor For Senior Operator and Junior Supervisor (BANDUNG)

Jadwal Training

Performance Analisys And Operating Of Induction Motor For Senior Operator and Junior Supervisor (BANDUNG)

Tanggal

24 Jan 2023-27 Jan 2023
21 Feb 2023-24 Feb 2023
13 Mar 2023-16 Mar 2023
10 Apr 2023-13 Apr 2023
15 May 2023-18 May 2023
06 Jun 2023-09 Jun 2023
25 Jul 2023-28 Jul 2023
01 Aug 2023-04 Aug 2023
26 Sep 2023-29 Sep 2023
24 Oct 2023-27 Oct 2023
13 Nov 2023-16 Nov 2023
05 Dec 2023-08 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION:
This training will be presented for the senior technician or junior supervisor. Induction motor as a driver mechanic most dominant than other electric motors in the production process in industries. It must be ensured that these motors must be able to function reliably during the production process, namely, for 24 hours a day. Therefore, to ensure reliable operation is always to serve the production process, the motor must be operated according to proper procedures and a hearing is protected. If there are detected decreased motor performance of its instrumentation panel, it can be known through its performance analysis.

During the training, presentation of the materials will be presented in a comprehensive manner, through the method of presentation of these things easily lead to a more complex, and practically based to a critical analysis.

 TRAINING OBJECTIVES:
After completing this training, at the end of the activities you will be able to explain clearly about the analysis of performance and operation of the induction motor.

TRAINING MATERIAL OUTLINE:

  • Function of induction motor parts
  • Three phase rotating field
  • Starting of motor
  • Develop of torque
  • Characteristics of no load
  • Name plate data interpretation
  • Characteristics of loading
  • Brake horse power and efficiency
  • Block rotor test
  • Equivalent circuit
  • Protection of motor

TRAINING METHOD:

  • Question – answer
  • Discussion
  • Adult education.
  • Presentation is associated with the experience of participants

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :

  1. Rp 8.500.000/person (full fare)  or
  2. Rp 8.250.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

Trainer     
Brayan Munthe, MT. and Team
Brayan Munthe was born in May 26th 1954. He got his education from electrical engineering IKIP Padang, then diploma of technical teacher training Hawthorn Institute of Education, Melbourne, and his master program from electrical engineering universitas gadjah mada, UGM Yogyakarta. He has followed many courses in Indonesia and also abroad to improve his capabilities. He is lecturer at politeknik TEDC and also at electrical department technical education development center Bandung. He has field experiences because he has done some projects in some companies in Indonesia related to his competencies.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pneumatic System and Application

Jadwal Training

Pneumatic System and Application Tanggal 24 Jan 2023-27 Jan 2023 21 Feb 2023-24 Feb 2023 07 Mar 2023-10 Mar 2023 11 Apr 2023-14 Apr 2023 ... Baca Selengkapnya

Pneumatic System and Application

Jadwal Training

Pneumatic System and Application

Tanggal

24 Jan 2023-27 Jan 2023
21 Feb 2023-24 Feb 2023
07 Mar 2023-10 Mar 2023
11 Apr 2023-14 Apr 2023
09 May 2023-12 May 2023
19 Jun 2023-22 Jun 2023
25 Jul 2023-28 Jul 2023
29 Aug 2023-01 Sep 2023
26 Sep 2023-29 Sep 2023
24 Oct 2023-27 Oct 2023
07 Nov 2023-10 Nov 2023
18 Dec 2023-21 Dec 2023

TRAINING DURATION
4 hari

Jam Pelaksanaan
08.30 – 16.00 WIB

TEMPAT
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Ir. Aris Suryadi, MT adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

HARGA INVESTASI/PESERTA :

1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified and experienced instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TUJUAN TRAINING :
Untuk memberi wawasan industri dalam rekayasa pneumatik sebagai bagian dari teknologi dasar untuk industri, berupa pengetahuan tentang prinsip-prinsip fisika, fungsi dan penggunaan pneumatik. Memberikan pengetahuan mengenai instalasi penyedia tekanan udara. serta pengetahuan komperehensif mengenai perancangan alat serta sistem pneumatik berupa pengembangan kemampuan merancang dan membuat simulasi konstruksi kontrol.

CAKUPAN MATERI TRAINING :

  1. Pembukaan dan Pre Test
  2. Review Mekanika Fluida
    • Fluida kompresibel & Imkompresibel
    • Tekanan
    • Kerugian Tekanan pada aliran (Head losses)
    • Energi dan Daya
  3. Sistem Pneumatik secara umum
    • Perubahan energi pada sistem Pneumatik
    • Kontrol Pneumatik
    • Aktuator
  4. Sistem penyedia tekanan pada Sistem Pneumatik
    • Kompresor
    • Regulator tekanan
    • Filter
    • Pelumas (Lubricator)
    • Pemipaan
  5. Aktuator Pneumatik
    • Jenis dan Prinsip kerja
    • Perhitungan Pemilihan Aktuator
  6. Sistem kontrol Pneumatik
    • Simbol dan fungsi
    • Kontrol aliran (Flow control)
    • Kontrol tekanan (Pressure control)
    • Kontrol arah (Directional control)
  7. Pengontrolan gerakan dasar
    • Pengontrolan Arah, Kecepatan & Pembebanan
  8. Metode pengontrolan gerakan 1 (Sequential)
    • Metode Intuitif
    • Metode Set-Reset
    • Metode Latching
  9. Metode pengontrolan gerakan 2 (Conditional)
    • Logik Dasar
    • Metode Logik
  10. Kontrol Panel
    • Start, stop, manu/auto, Emergency Control
  11. Pewaktu Pneumatik (Pneumatic Timer)
  12. Latihan Penerapan (Praktek) 1
  13. Latihan Penerapan (Praktek) 2
  14. Perawatan dan Trouble shooting
  15. Post Test dan Penutupan

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Information Security System

Jadwal Training

Information Security System Tanggal 16 Jan 2023-18 Jan 2023 13 Feb 2023-15 Feb 2023 27 Feb 2023-01 Mar 2023 03 Apr 2023-05 Apr 2023 01 ... Baca Selengkapnya

Information Security System

Jadwal Training

Information Security System

Tanggal

  • 16 Jan 2023-18 Jan 2023
  • 13 Feb 2023-15 Feb 2023
  • 27 Feb 2023-01 Mar 2023
  • 03 Apr 2023-05 Apr 2023
  • 01 May 2023-03 May 2023
  • 19 Jun 2023-21 Jun 2023
  • 17 Jul 2023-19 Jul 2023
  • 31 Jul 2023-02 Aug 2023
  • 18 Sep 2023-20 Sep 2023
  • 16 Oct 2023-18 Oct 2023
  • 30 Oct 2023-01 Nov 2023
  • 18 Dec 2023-20 Dec 2023

Duration     
3 Days

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INVESTATION PRICE/PERSON :

  1. Rp 5.950.000/person (full fare)  or
  2. Rp 5.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 5.500.000/person (if there are 3 or more participants from the same company)

INTRODUCTION :
The information you collect, store, manage and transfer is an organizational asset. It adds value to your business and consequently needs to be suitably protected. It may be the personal details of your customers or confidential financial data. Growing dependence on information systems, shared networks and distributed services like cloud computing means organizations are more now even more vulnerable to security threats. In a recent survey by the Chartered Management Institute, 72% of businesses admitted that they were worried about the financial impact of cybercrime with 1 in 3 having experienced such attacks in 2010. Poor supervision of staff and lack of proper authorization procedures are frequently highlighted as major causes of security incidents.

TRAINING OBJECTIVE :

  • The training will increase the key knowledge of your information security concepts and trends for secure administration and management f computer systems and networking
  • To be thoroughly understand of the challenges of network security in a global, dynamic networked systems environment
  • To understand te wide range of vulnerabilities and threats to which an organization’s information assets may be exposed
  • To identifty ways to improve readiness in responding and recovering from information security incidents

TRAINING MATERIAL OUTLINE :

  • Dimension of Information Security
  • Security Management Practices
  • Human Resources Security
  • Cryptography
  • Network Security Technology
  • Information SecurityTechnology
  • Access Control System
  • Disaster Recovery Planning/ Business Continuity Planning
  • Operation Security
  • Physical Security

TRAINING DURATION :  3 days

FASILITAS UNTUK PESERTA :

  • Modul Training
  • Flashdisk Training berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Trainer     
Emir Mauludi Husni, Ir. M.Sc., Ph.D. dan Tim
Ir. Emir Mauludi Husni, M.Sc., Ph.D. Menamatkan pendidikan S1 Teknik Elektro, Institut Teknologi Bandung, pendidikan S2 dan S3 Teknik Satelit dan Telekomunikasi, University of Surrey, UK. Saat ini bekerja sebagai dosen di School of Electrical Engineering & Informatics, Institut Teknologi Bandung. Pengalaman pada bidang training, konsultasi dan implementasi projek lebih dari 15 tahun, bertindak sebagai dosen di beberapa perguruan tinggi selama lebih dari 13 tahun baik di Indonesia maupun Malaysia. Sebagai dosen, telah banyak menyumbangkan hasil penelitian dan publikasi pada jurnal ilmiah dan pembicara pada konferensi nasional dan internasional.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Centrifugal Gas Compressor Anti Surge Control

Jadwal Training

Centrifugal Gas Compressor Anti Surge Control TRAINING OBJECTIVE: Memberikan pengertian dasar tentang teori (mekanika fluida dan termodinamika) yang berkaitan dengan kompresor sentrifugal dan instalasinya, yang ... Baca Selengkapnya

Centrifugal Gas Compressor Anti Surge Control

Jadwal Training

Centrifugal Gas Compressor Anti Surge Control

TRAINING OBJECTIVE:

  • Memberikan pengertian dasar tentang teori (mekanika fluida dan termodinamika) yang berkaitan dengan kompresor sentrifugal dan instalasinya, yang akan menjadi dasar pemahaman terhadap prinsip teori, cara kerja dan karakteristik kompresor sentrifugal beserta instalasinya (sistem) dan pengertian tentang gejala fisik yang terjadi pada operasi.
  • Memberikan pengertian tentang karekteristik kompresor sentrifugal dqn instalasinya (sistem) yang menjadi dasar pengenalan terhadap sifat-sifat kompresor sentrifugal dan instalasinya serta pemahaman tentang dasar perancangan sistem, pemilihan kompresor, cara pengoperasian dan perlakuan terhadap kompresor sentrifugal beserta instalasinya.
  • Memberikan pengenalan tentang jenis-jenis kompresor dan komponen-komponen utama serta karakteristiknya yang menjadi dasar pemahaman tentang konstruksi dan daerah kerja (kondisi operasi) kompresor.
  • Memberikan dasar cara-cara perawatan dan mengatasi masalah pada kompresor sentrifugal dan instalasinya.
  • Surging pada compresor centrifugal harus dihindarkan, hubungan surging dengan karakteristik kompresor centrifugal, faktor faktor apa saja yang menyebabkan terjadinya surging dan bagaimana cara mengantisipasi hal tersebut akan dibahas secara tuntas dalam kursus ini.
  • Dengan semua hal diatas dan pengalaman peserta, pada akhirnya para peserta pelatihan akan/diharapkan mempunyai kemampuan mengoperasikan sistem dengan baik, mengenali gejala-gejala yang terjadi selama operasi, merawat dan mengatasi masalah yang timbul pada operasi sistem kompresor sentrifugal, dengan dilengkapi pengertian dasar perancangan sistem.

TRAINING MATERIAL OUTLINE: 

  1. Dasar Teori Mekanika Fluida dan Thermodinamika
  • Sifat-sifat fisik dan termodinamik fluida (kompresible) yang relevan
  • Dasar aliran fluida (kompresible)
  • Dasar dinamika fluida
  • Dasar proses energi pada fluida
  • Kehilangan (losses) energi pada instalasi
  1. Teori Dasar Kompresor Sentrifugal dan Instalasinya
  • Kebutuhan energi (head) dan tekanan pada instalasi
  • Prinsip pemindahan energi pada kompresor sentrifugal
  • Karakteristik instalasi dan kompresor (kapasitas, tekanan, & efisiensi)
  • Perhitungan head kompresor sentrifugal
  • Karakteristik head – kapasitas kompresor sentrifugal
  • Karakteristik head – kapasitas system
  • Perubahan sifat fisik gas pada proses di dalam instalasi
  1. Gejala-Gejala Kritis/ Berbahaya pada Operasi (akibat Surging)
  • Tekanan berlebih
  • Tekanan negatif
  • Temperatur berlebih (overheat)
  • Fluktuasi tekanan
  • Kondisi off design
  1. Surging
  • Pengaruh sifat fisik gas dalam kaitannya dengan surging
  • Analisa terjadinya surging
  • Anti surge
  • Dasar teori control dalam kaitannya dengan surging
  • Anti surge control
    • tipe anti surge control
    • komponen anti surge control
  1. Operasi
  • Prosedur menjalankan dan menghentikan kompresor
  • Pengaturan kapasitas
  • Pencegahan bahaya
  • Operasi otomatik
  1. Perawatan/Pemeliharaan
  • Pemeriksaan pendahuluan
  • Pemeriksaan kondisi operasi
  • Mengatasi gangguan

WHO SHOULD ATTEND THIS TRAINING?:

Mechanical Engineers, Maintenance Engineers and Supervisors, Service Engineers and Supervisors, Work over Engineers and Supervisors, Maintenance Technicians, Etc.

INSTRUCTOR : Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION : 4 days

TRAINING TIME :  

  • 16 Jan 2023-19 Jan 2023
  • 13 Feb 2023-16 Feb 2023
  • 06 Mar 2023-09 Mar 2023
  • 04 Apr 2023-07 Apr 2023
  • 08 May 2023-11 May 2023
  • 20 Jun 2023-23 Jun 2023
  • 17 Jul 2023-20 Jul 2023
  • 28 Aug 2023-31 Aug 2023
  • 18 Sep 2023-21 Sep 2023
  • 16 Oct 2023-19 Oct 2023
  • 06 Nov 2023-09 Nov 2023
  • 19 Dec 2023-22 Dec 2023

INVESTMENT PRICE/PERSON :

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Turbine Operation & Maintenance (BANDUNG)

Jadwal Training

Gas Turbine Operation & Maintenance (BANDUNG) Tanggal 10 Jan 2023-13 Jan 2023 07 Feb 2023-10 Feb 2023 28 Feb 2023-03 Mar 2023 11 Apr 2023-14 ... Baca Selengkapnya

Gas Turbine Operation & Maintenance (BANDUNG)

Jadwal Training

Gas Turbine Operation & Maintenance (BANDUNG)

Tanggal

10 Jan 2023-13 Jan 2023
07 Feb 2023-10 Feb 2023
28 Feb 2023-03 Mar 2023
11 Apr 2023-14 Apr 2023
02 May 2023-05 May 2023
19 Jun 2023-22 Jun 2023
11 Jul 2023-14 Jul 2023
31 Jul 2023-03 Aug 2023
12 Sep 2023-15 Sep 2023
10 Oct 2023-13 Oct 2023
31 Oct 2023-03 Nov 2023
18 Dec 2023-21 Dec 2023

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

Harga

  • Rp 8.500.000/person (full fare) or
  • Rp 8.250.000/person (early bird, payment 1 week before training) or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Tas
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INTRODUCTION :
Gas turbine in oil and gas used for gas plant and power plant facilities, both of plant are critical plant to append activity of production and delivery system of oil and gas. Reliability and deliverability is more important factor to provide effectiveness system after all.

OBJECTIVE :
After the course participant :

  1. Have a good knowledge of gas turbine out and technology include thermodynamic concepts, construction, detail component’s and function
  2. Will improve their ability to understand cause and effect of failure to guide root cause analysis in problem solving and trouble shooting
  3. Familiar with product of gas turbine which is used in the gas plant

TRAINING MATERIAL OUTLINE :

  1. Introduction to Gas turbine
  2. An Overview of Gas Turbines
    a. History of gas turbine
    b. Gas turbine in oil and gas industry
  3. Brayton cycle
  4. Gas turbine art and design
  5. Engine  design
  6. Operation principle
  7. Engine case and inlet air
  8. Gas turbine in detail assembly and function of components
    a. Compressor section    : Inlet guide vane, Rotor compressor,Stator Compressor,Bleed Valve and  control.
    b. Diffuser and Combustor    : Combustion chamber, Fuel Nozzle,Ignition plug
    c. Turbine  and exhaust    :  Inlet nozzle, Blade turbine and cooling system
  9. Auxiliary Components and Accessories : Bearings and Seals, Gears
  10. Gas turbine bearing and lubrication system
    • Ingition system
    • Bearing and seals
    • Fuel gas and gas system
  11. Basic combustion in gas turbine
    • Heating value in natural gas (LHV and HHV), Wobb number
    • Stochiometric combustion
    • Emission of combustion
    • How gas burned in combustion chamber
    • Cooling technology and thermal barrier coating
  12. Compressor in gas turbine
    a. Energy convertion in compressor
  13. How compressor work (increase pressure and flowing gas)
    • Gas flow compressor  phenomena stall and surge,
    • How to control  control surge  ( IGV and bleed valve)
    • Compressor failure and material
  14. Turbine who it works
    • Convert Pressure and temperature to Mechanical energy
    • How blade turbine work
    • Internal cooling and coating
    • Failure in turbine component
  15. Gas turbine operation and control
    • Operation gas turbine for gas compressor
    • Operation gas turbine for Power Generation
    • Fuel control system
    • IGV control system
    • Lubrication control system

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Water Treatment (BANDUNG)

Jadwal Training

Water Treatment (BANDUNG) TRAINING OBJECTIVES: 1. Dapat memahami konsep dasar proses pengolahan air 2. Dapat memahami cara proses dan operasi peralatan pengolahan air TRAINING MATERIAL ... Baca Selengkapnya

Water Treatment (BANDUNG)

Jadwal Training

Water Treatment (BANDUNG)

TRAINING OBJECTIVES:
1. Dapat memahami konsep dasar proses pengolahan air
2. Dapat memahami cara proses dan operasi peralatan pengolahan air

TRAINING MATERIAL OUTLINE:
1. Sedimentasi dan fungsi operasi sedimentasi
2. Alat sedimentasi dan cara operasi
3. Prasyarat air umpan unit sedimentasi
4. Proses Flokulasi
5. Hong Flokulasi
6. Air umpan unit hong flokulasi
7. Proses presepitasi kimia
8. Alat proses Presipitasi kimia dan cara operasinya
9. Deskripsi dan fungsi Filtrasi
10. Alat filtrasi dan cara operasinya
11. Fungsi proses pertukaran ion
12. Alat proses pertukaran ion dan proses operasinya
13. Absorpsi karbon aktif dan fungsinya
14. Proses disinfeksi dan fungsinya

WHO SHOULD ATTEND THIS TRAINING?:
1. Chemical Engineer
2. Professionals
3. Plant Maintenance / Operators / Supervisor / Superintendent

INSTRUCTOR : Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION : 4 days

TRAINING TIME :

  • 10 Jan 2023-13 Jan 2023
  • 07 Feb 2023-10 Feb 2023
  • 13 Mar 2023-16 Mar 2023
  • 10 Apr 2023-13 Apr 2023
  • 15 May 2023-18 May 2023
  • 19 Jun 2023-22 Jun 2023
  • 11 Jul 2023-14 Jul 2023
  • 22 Aug 2023-25 Aug 2023
  • 12 Sep 2023-15 Sep 2023
  • 10 Oct 2023-13 Oct 2023
  • 13 Nov 2023-16 Nov 2023
  • 18 Dec 2023-21 Dec 2023

INVESTMENT PRICE/PERSON :
1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Effective Presentation Skills (BANDUNG)

Jadwal Training

Effective Presentation Skills (BANDUNG) Tanggal 11 Jan 2023-13 Jan 2023 08 Feb 2023-10 Feb 2023 20 Mar 2023-22 Mar 2023 12 Apr 2023-14 Apr 2023 ... Baca Selengkapnya

Effective Presentation Skills (BANDUNG)

Jadwal Training

Effective Presentation Skills (BANDUNG)

Tanggal

11 Jan 2023-13 Jan 2023
08 Feb 2023-10 Feb 2023
20 Mar 2023-22 Mar 2023
12 Apr 2023-14 Apr 2023
22 May 2023-24 May 2023
14 Jun 2023-16 Jun 2023
12 Jul 2023-14 Jul 2023
21 Aug 2023-23 Aug 2023
13 Sep 2023-15 Sep 2023
11 Oct 2023-13 Oct 2023
20 Nov 2023-22 Nov 2023
13 Dec 2023-15 Dec 2023

VENUE  
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING BENEFITS :

  1. Analyzing your audience
  2. Organize your thoughts and write a clearly focused outline that wastes no words or time
  3. Developing your writing and organizing techniques
  4. Using visual aids
  5. Speak clearly and confidently in both prepared and impromptu speaking situations
  6. Managing presentation stress
  7. Speak and think with greater clarity and purpose stressing key ideas
  8. Face an audience with confidence and control and make the most of your own natural speaking
  9. Use your words and your body to convince and persuade the audience.

WHO SHOULD ATTEND THIS TRAINING? :
Anyone who wants to improve his/her skills in presentation ability.

TRAINING MATERIAL OUTLINE :

  1. Introduction/Background
    • Workshop objectives
    • Expectation of participants.
  2. The 7 Steps in Effective Presentation
  3. Pre-Design
    • Initial planning, Situational analysis
    • Goal and Message Definition
    • Audience analysis
    • Planning the presentation Approach
  4. Design
    • Techniques to expedite the design process
    • The standard presentation formula
    • Organizations tools
    • Titles -A full house may depend on them
  5. Build the Content
    • Explanation -desc’s, definitions and ground rules
    • Supporting material -the meat of the presentation
    • Visual aids Limited multimedia and multi-image presentations
  6. Make Arrangements
    • Six Axioms
    • Arranging for facilities, equipment and incidentals
  7. Test and Evaluate
    • Planning a productive test phase
    • Conducting a productive dry run
    • Some criteria for evaluating presentations
  8. Deliver: Show Time!
    • Overview – some basic points
    • Achieving positive nonverbal messages
    • Language – the verbal channel
    • Transmission of language – the voice
  9. Follow-up: You’re not Through Yet
    • Kind of follow-up
    • Assessment and feedback
  10. Special Presentation Situation
    • The team presentation
    • International presentation
    • Speaking from a manuscript
    • The presenter as emcee
  11. Closing (Summary and Conclusion).

TRAINING DURATION :   3 days

INVESTATION PRICE/PERSON :

  • Rp. 6.500.000/peserta (bayar penuh) atau
  • Rp. 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp. 5.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Dr. Ayi  Tejaningrum,SE.,MT. Adalah lulusan magister dan doktor dari teknik dan manajemen Industri Institut Teknologi Bandung (ITB), dan sarjana dari IKOPIN Bandung jurusan manajemen produksi. Lebih dari 20 tahun mengajar di perguruan tinggi, seperti di IKOPIN, STIE EKUITAS dan Universitas Widyatama untuk mata kuliah dengan topik-topik sebagai berikut : Manajemen pemasaran, Manjaemen Sumber Daya Manusia, Kewirausahaan, Manajemen mutu, Statistitical Quality Control, Manajemen projek, Penjadwalan projek, ISO 9000, Manajemen SDM, Sistem Operasi I dan II, Six Sigma. Dr. Ayi  Tejaningrum  SE. MT. termasuk instruktur yang produktif, sudah ratusan kelas training, baik publik maupun inhouse training, yang sudah beliau berikan.  Banyak perusahaan di Indonesia yang sudah ikutserta di kelas training Beliau diantaranya Pt. Pertamina (Persero), Pt. Semen Gresik, Pt. Pupuk Sri Widjaya, Pt. Arun Lng, Pt. Semen Padang, Pt. Chevron Indonesia , Setjen Dpr Ri , Setjen Mpr Ri , Pt. Peruri , Kementrian Sek. Negara, Sekretaraian Wakil  Presiden , Pt. Pln , Pt. Total , Pt. Pupuk Kujang , Pt. Pupuk Kaltim , Pt. Trubalindo Coal Mining , Pt. Tambang Batu Bara Adaro Iddonesia dan masih banyak yang lainnya. Dalam waktu yang demikian panjang yang telah Beliau lalui, Dr. Ayi  Tejaningrum  SE. MT. telah memiliki pengalaman riil praktis dan ditopang kemampuan akademis yang baik maka setiap kelas yang Beliau  sampaikan akan memperoleh wawasan dan manfaat training yang lebih baik.

Pendaftaran Event

Effective Presentation Skills (BANDUNG)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2026

Info Seminar | Jadwal Seminar