Electrical Power System Protection (BANDUNG)

Jadwal Training

Electrical Power System Protection (BANDUNG) Tanggal 22 Aug 2016-25 Aug 2016 13 Sep 2016-16 Sep 2016 10 Oct 2016-13 Oct 2016 07 Nov 2016-10 Nov ... Baca Selengkapnya

Electrical Power System Protection (BANDUNG)

Jadwal Training

Jadwal Pelatihan dan training

Electrical Power System Protection (BANDUNG)

Tanggal
22 Aug 2016-25 Aug 2016
13 Sep 2016-16 Sep 2016
10 Oct 2016-13 Oct 2016
07 Nov 2016-10 Nov 2016
13 Dec 2016-16 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
After completion this training participants will have gained a theoretical and applied understanding of power system protection. The performance of instrument transformers, transducers, protective relays, and circuit breakers is first addressed. These devices are then integrated into coordinated protective systems for generators, transformers, transmission lines, reactors, capacitor banks, system buses, etc. Although basic protection concepts are hardware-independent, the application of electromagnetic, solid state, and microprocessor-based relays will also be discussed. Trade-offs between reliability, selectivity, speed, simplicity, and economy are emphasized. This training is designed to them who want to know on electrical power system protection.

TRAINING MATERIAL OUTLINE:
1. Review:
a. system protection philosophies
b. system grounding
c. circuit breakers
d. fuses

2. Relay input sources:
a. VTs
b. CTs
c. CVTs
d. CCVTs
e. optical voltage and
f. current transducers

3. Fundamental protection concepts:
a. time-inverse
b. differential
c. directional impedance, etc.

4. Generator protection
a. differential
b. negative sequence
c. loss of excitation
d. out of step, etc

5. Motor protection
a. ground fault
b. locked rotor
c. undervoltage
d. phase rotation, etc

6. Bus, reactor, capacitor bank protection.

7. Transformer protection
a. differential
b. sudden pressure
c. over temperature
d. low oil, etc

8. Line protection
a. directional comparison
b. blocking
c. unblocking
d. transfer trip, etc

9. System stability, reclosing, and load shedding.

10. Communications
a. pilot wire
b. power line carrier
c. microwave
d. fiber optics
e. SCADA, etc.

11. Discussion and cases study

INVESTATION PRICE/ PERSON :  

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN) and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

CAD Bidang Teknik Mesin (CAD FOR MECHANICAL: AUTOCAD OR CATIA)

Jadwal Training

CAD Bidang Teknik Mesin (CAD FOR MECHANICAL: AUTOCAD OR CATIA) Tanggal 06 Sep 2016-09 Sep 2016 04 Oct 2016-07 Oct 2016 01 Nov 2016-04 Nov 2016 ... Baca Selengkapnya

CAD Bidang Teknik Mesin (CAD FOR MECHANICAL: AUTOCAD OR CATIA)

Jadwal Training

CAD Bidang Teknik Mesin (CAD FOR MECHANICAL: AUTOCAD OR CATIA)

Tanggal

  • 06 Sep 2016-09 Sep 2016
  • 04 Oct 2016-07 Oct 2016
  • 01 Nov 2016-04 Nov 2016
  • 06 Dec 2016-09 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION
4 days

PENDAHULUAN :
Pada masing-masing tingkatan hampir di dalam semua jenis industri sewaktu proses pembuatan produk berlangsung (baik tingkatan politik perusahaan, perancangan, pembuatan dan perakitan, dan tingkatan distribusi dan purnajual) dan antara berbagai tingkatan tersebut terjadi suatu proses komunikasi atau pertukaran informasi di antara departemen pabrik (alat, mesin, dan manusia). Dari berbagai bentuk media komunikasi yang digunakan salah satunya dianggap sebagai media komunikasi yang terpenting yaitu gambar teknik, baik yang dibuat secara manual dituliskan di kertas ataupun memanfaatkan media elektronik CAD (Computer Aided/Augmented/Automated Design). Gambar teknik haruslah jelas dan dimengerti oleh semua orang, baik oleh perancang produk, perancang proses produksi, operator-operator mesin, pengontrol kualitas selama proses produksi berlangsung, yang dituliskan dalam spesifikasi geometrik. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi CAD Bidang Teknik Mesin (Computer Aided Drafting for Mechanical: AUTOCAD or CATIA).
 
SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perancangan pada industri rekayasa.
 
TUJUAN TRAINING :
Setelah mengikuti pelatihan ini, diharapkan peserta mempunyai kemampuan sebagai berikut:

  • Pemahaman tentang pengetahuan spesifikasi geometrik produk pada gambar teknik sesuai dengan standar internasional.
  • Keahlian dalam menggambar suatu produk dengan acuan spesifikasi geometrik sesuai dengan standar internasional.

CAKUPAN MATERI TRAINING :
1.    Spesifikasi geometrik.
2.    Perintah menggambar pada AutoCAD or CATIA
3.    Penggabungan gambar dan pemakaian makro.
4.    Pengenalan konsep 3 D, AutoVision, AutoCAD Designer

INVESTATION PRICE/PERSON :   

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.:

Pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.

In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Food Hygiene Sanitation & Monitoring (BANDUNG)

Jadwal Training

Food Hygiene Sanitation & Monitoring (BANDUNG) Tanggal 5-7 September 2016 Tempat The Jayakarta / Mercure Bandung Trainer Prof. Dr. Tan Malaka, MOH, DrPH, SpOK, HIU ... Baca Selengkapnya

Food Hygiene Sanitation & Monitoring (BANDUNG)

Jadwal Training

Food Hygiene Sanitation & Monitoring (BANDUNG)

Tanggal
5-7 September 2016

Tempat
The Jayakarta / Mercure Bandung

Trainer
Prof. Dr. Tan Malaka, MOH, DrPH, SpOK, HIU

PENDAHULUAN
Setiap saat kita mendengar terjadinya keracunan makanan (food poisoning) sebagai akibat penanganan bahan makanan yang salah. . Untuk mencegah terjadinya hal seperti itu, sebaiknya diberikan pelatihan bagi pelaksana penyaji/pengelola makanan (foodhandler). Pelatihan ini bertujuan meningkatkan kemampuan dan pengetahuan akan penanganan makanan secara benar.

Selain itu diperlukan juga komitmen pihak manajemen perusahaan untuk mendukung program ini, dimana penyediaan infrastruktur yang memadai sehingga memungkinkan foodhandler bekerja dengan baik, serta menyadari pentingnya pelatihan sebagai syarat utama yang menunjang tercapainya tujuan diatas. Sesuai dengan peraturan-perundangan, pemantauan kesehatan dari para foodhandler juga harus dilaksanakan. Pemeriksaan kesehatan yang terarah sesuai dengan sifat pekerjaannya (“job-related”), diperlukan agar para penjamah makanan tersebut selalu dalam kondisi fit dan sehat, untuk mengolah makanan.

Sehingga mampu menghasilkan makanan yang aman bagi pelanggan, bukannya malah menjadi sumber penularan penyakit.

MANFAAT PELATIHAN
Meningkatkan kemampuan dan pengetahuan bagi pengelola jasa catering (jasa boga) dalam penanganan makanan secara benar & Higienis, mulai dari penanganan bahan baku, pengolahan dan penyajian

Content :

  1. Indonesian Rules and Regulations pertaining to Food Sanitation and Hygiene;
  2. Principles of food sanitation;
  3. Food Contaminants;
  4. Food borne diseases;
  5. Canteen Hygiene Policy;
  6. Medical Aspects of Food Handlers;
  7. Canteen Supervision.
  8. Outbreak investigation/MERP
  9. Peraturan Perundangan Tentang Sanitasi Makanan (UU Nomor 23/1992 tentang Kesehatan & Kepmenkes Nomor 715/Menkes/SK/V/2003 tentang Persyaratan hygiene sanitasi Jasaboga)
  10. Mikrobiologi Pencemar makanan
  11. Dasar- Dasar sanitasi Makanan
  12. Bahan Pencemar Makanan
  13. Bahan Pencemar Makanan
  14. Penyakit Bawaan Makanan
  15. Sanitasi Lingkungan: Air, Sampah, Hama.
  16. Supervisi Kegiatan Kantin
  17. Proses masak memasak makanan
  18. Menghadapi Wabah Keracunan Makanan.
  19. Mengelola Aspek Medik para Penjamah Makanan
  20. Canteen Hygiene Policy
  21. Pengendalian Mutu Mandiri / HACCP
  22. Latihan-latihan
  23. Pemaparan foto-foto

SASARAN PESERTA
Manajer HRD, Penanggung Jawab HSE, Dokter/Paramedik di Perusahaan, General Services, Pengawas Kantin, Pelaksana Kantin

COURSE FEE :
Rp. 7.450.000,-Pembayaran sebelum tanggal 29 Agustus 2016
Rp. 7.950.000,-Pembayaran sebelum tanggal 7 September 2016 (Cash di tempat)
Rp. 8.500.000,-Pembayaran Setelah tanggal 7 September (Invoice/PO)
(include : Certificate, modul, training kit, coffee break, lunch, & souvenir

NOTE : Untuk yang sudah pernah mengikuti pelatihan Food, bisa mengikuti sertifikasi Kemenakertrans

SYARAT SERTIFIKASI :
1. Mengisi Biodata Peserta
2. Foto Copy KTP
3. Pas foto ukuran 4×6 dan 2×3 masing – masing 2 lembar dengan background warna merah

Pelaksanaan Pelatihan
1. Pelatihan dilaksanakan selama 3 hari
2. Setelah mengikuti pelatihan peserta mendapatkan sertifikat dari Kemenakertrans

Metode Pelatihan
1. Teori dan diskusi
2. Ujian / Evaluasi

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Refresh & Perpanjangan SKP Ahli K3 Umum (BANDUNG)

Jadwal Training

Refresh & Perpanjangan SKP Ahli K3 Umum (BANDUNG) Sertifikasi Bekerjasama dengan DEPNAKERTRANS RI Tanggal 8-9 September 2016 Pukul 08.00-17.00 WIB Tempat The Jayakarta / Mercure ... Baca Selengkapnya

Refresh & Perpanjangan SKP Ahli K3 Umum (BANDUNG)

Jadwal Training

Training K3 Safety

Refresh & Perpanjangan SKP Ahli K3 Umum (BANDUNG)

Sertifikasi Bekerjasama dengan DEPNAKERTRANS RI

Tanggal
8-9 September 2016

Pukul
08.00-17.00 WIB

Tempat
The Jayakarta / Mercure Hotel Bandung

DESKRIPSI
Tingginya tingkat kompetisi dunia industri menumbuhkan paradigma baru tentang keselamatan dan kesehatan kerja sebagai aspek yang cukup dipertimbangkan. Pelaksanaan K3 merupakan indikator tingkat kesejahteraan tenaga kerja dan berkorelasi langsung dengan kualitas tenaga kerja, peningkatan produktivitas dan pertumbuhan ekonomi. Sejalan dengan kebijakan pemerintah dengan diterapkannya Permenaker No. 04 tahun 1987 tentang Panitia Pembinaan Kesehatan dan Keselamatan Kerja (P2K3), UU No. 13 tahun 2003 tentang penyelenggaraan Sistem Manajemen K3 (SMK3) dan UU No. 1 tahun 1970 tentang ketenagakerjaan.

MATERI

  1. Kebijakan Nasional
  2. Undang-undang No.1 Tahun 1970
  3. Dasar-dasar K3
  4. Pengawasan K3 Pesawat Uap
  5. Pengawasan K3 Bejana Tekan
  6. Pengawasan K3 Pesawat Mekanik
  7. P3K3
  8. Kelembagaan / Keahlian
  9. SMK3 dan Audit SMK3
  10. Pengawasan K3 Keselamatan Kerja
  11. P3K
  12. Laporan Kecelakaan
  13. Manajemen Resiko
  14. Pengawasan K3 Kontruksi Bangunan
  15. Pengawasan K3 Kebakaran
  16. Pengawasan K3 Listrik
  17. Pengawasan K3 Lingkungan

* Materi akan diberikan dalam waktu 1 hari dan bersifat refreshing

PERSYARATAN PESERTA
Peserta yang akan mengikuti pelatihan ini adalah mereka yang pernah mengikuti pelatihan AK3 Umum & akan memperpanjang SKP AK3 Umum.

Sebagai persyaratan agar setiap peserta membawa dan menyerahkan :

  1. Surat permohonan perpanjangan Ahli K3 umum yang ditujukan Dirjen Pembinaan Pengawasan Ketenagakerjaan Depnakertrans RI Jl. Jend. Gatot Subroto Kav. 51 Jakarta Selatan.
  2. Photo copy Surat Keputusan Penunjukan/SKP yang bersangkutan
  3. Laporan kegiatan Ahli K3 yang bersangkutan (laporan kegiatan akan dipresentasikan dalam pelatihan).
  4. Mengisi biodata
  5. Photo berwarna background merah ukuran 4×6, 3×4, & 2×3 sebanyak 3 lembar

INSTRUKTUR
Instruktur pelatihan ini akan disampaikan oleh tenaga ahli K3 dari Depnakertrans RI

Fasilitas
Module / Handout
Training Kit
Coffe Break & Lunch
Perpanjangan SKP dari Depnaker

BIAYA PELATIHAN
Rp.3.250.000,-Pembayaran sebelum tanggal 30 Agustus 2016
Rp.3.500.000,-Pembayaran sebelum tanggal 9 September 2016 (Cash di tempat)
Rp.4.000.000,-Pembayaran Setelah tanggal 9 September (Invoice/PO)
(termasuk : Perpanjangan SKP dari Kemenakertrans, modul, training kit, coffee break, lunch,Souvenir)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Hukum Pertanahan : Hak-Hak Atas Tanah Dan Penyelesaian Sengketa (BATAM)

Jadwal Training

Hukum Pertanahan :  Hak-Hak Atas Tanah Dan Penyelesaian Sengketa (BATAM) BATAM + Trip To Singapore WAKTU: Kamis-Sabtu, 4-6 Agustus 2016 09.00 -16.00 WIB TEMPAT: Hotel ... Baca Selengkapnya

Hukum Pertanahan : Hak-Hak Atas Tanah Dan Penyelesaian Sengketa (BATAM)

Jadwal Training

Hukum Pertanahan :  Hak-Hak Atas Tanah Dan Penyelesaian Sengketa (BATAM)

BATAM + Trip To Singapore

WAKTU:
Kamis-Sabtu, 4-6 Agustus 2016
09.00 -16.00 WIB

TEMPAT:
Hotel Gideon Batam

INVESTASI:
Rp. 6.500.000,-/ peserta Belum termasuk PPN10% dan tidak termasuk penginapan)
Including: Training Modules, Sertifikat, Workshop kit, Lunch, Snack, Foto 10 R, souvenir, + kunjungan wisata ke Singapura (pulang pergi).

Deskripsi
Sengketa pertanahan merupakan isu yang selalu aktual seiring perkembangan pembangunan dan semakin meluasnya akses berbagai pihak untuk memperoleh tanah sebagai modal dasar dalam berbagai kepentingan. Sengketa dibidang tanah mempunyai kecenderungan meningkat dalam kompleksitas permasalahan maupun kuantitasnya seiring dinamika di bidang ekonomi, sosial dan politik.

Selain penyelesaian sengeketa melaui pengadilan/litigasi, dalam sistem hukum nasional dikenal penyelasian sengketa melalui lembaga di luar peradilan sebagaimana diatur dalam UU No.30 Tahun 1999 tentang Arbitrase dan Alternatif Penyelesaian Sengketa.

Salah satu alternatif penyelesain sengketa tanah adalah melalui Negosiasi dan Mediasi. Penyelesaian sengketa ini menawarkan cara khas, karena prosesnya relatif sederhana, waktunya singkat dan biaya dapat ditekan, tidak meningalkan luka bagi para pihak yang bersengketa karena tidak ada yang merasa dimenangkan atau dikalahkan.

Penyelesaian sengketa melalui negosiasi yang berlandaskan pada musyawarah, konsensus, atau penyelesain damai oleh kedua belah pihak penting dilakukan oleh pihak-pihak yang bersengketa mengingat karakteristik sengketa tanah unik, berbasis social dan budaya hukum mayarakat dan terbatasnya kemampuan pengadilan dalam menyelesaikan sengketa tanah dan Peraturan Presiden No. 10 Tahun 2006, peraturan dan keputusan kepala BPN serta petunjuk pelaksananya telah mendukung upaya nonlitigasi.

Dalam pelatihan ini akan dilakukan tahapan-tahapan hal hal berikut ini :

  1. Memahami tipologi masalah masalah di bidang pertanahan dan sifat permasalahan dari sengketa tanah untuk kepentingan swasta
  2. Mencari dan menemukan jalan keluar atas permasalahan tersebututamanya melalui negosiasi

Tujuan :
Tujuan dari pelatihan ini adalah peserta mampu memahami tentang hukum pertahanan atas hak tanah dan persengketaan di Indonesia.

Materi :

  1. Pengertian Hukum Tanah (Agraria)
  • Pluralisme Hukum Tanah
  • Rejim Hukum Pertanahan
  1. Hak atas Tanah dalam UU Agraria dan Sistem Pendaftaran Tanah
  • Macam-macam Hak Atas Tanah, termasuk hak ulayat masyarakat.
  • Hak Menguasai Negara
  • Fiscal Cadaster
  • Legal Cadaster
  • Pendaftaran Tanah
  • Rechtverwerking
  1. Pengadaan Tanah dan kompensasi
  • Ketentuan Hukum Positif
  • Mekanisme dan Prosedur
  1. Tipologi masalah-masalah Dalam Pengadaan Tanah
  • Penggarapan rakyat atas tanah perkebunan, kehutanan dll
  • Pelanggaran peraturan landreform
  • Ekses-ekses penyediaan tanah untuk pembangunan
  • Sengketa perdata berkenaan dengan masalah tanah
  • Sengketa berkenaan dengan tanah ulayat.
  1. Sifat permasalahan dari sengketa tanah untuk kepentingan swasta
  • Masalah prioritas pemegang hak yang sah atas tanah baik untuk tanah yang berstatus hak maupun yang belum ada haknya
  • Bantahan atas suatu alas hak
  • Kekeliruan pemberian hak yang disebabkan penerapan aturan tidak benar
  • Sengketa lain yang mengandung aspek sosial = (Sengketa penguasaan dan pemilikan, sengketa prosedur penetapan dan pendaftran tanah, sengketa batas/letak bidang tanah, sengketa ganti rugi eks tanah partikelir, sengketa tanah ulayat, sengeketa pngadaan tanah dan sengketa pelaksanaan putusan.
  1. Land Solving dan negosiasi
  • Solving conflict dan perundang-undangan terkait :
  1. Kepres No.55 tahun 1993 tentang Pengadaan tanah bagi Pelaksanaan pembangunan untuk kepentingan umum
  2. Permen No. 1 tahun 1994 , Jo. Permen No. 55 tahun 1993 mengatur tentang tata cara melakukan musyawarah. Perpres No. 36 tahun 2005 Tentang   pengadaan Tanah bagi pelaksanaan      pembangunan  untuk kepentingan umum diubah menjadi PERPRES No. 65 tahun 2006 dilengkapi dengan Per Kepala BPN No. 3 tahun 2007 (menyatakan Kepres No.5 tahun 1993 tidak berlaku lagi).
  • Perpres No. 10 tahun 2006 tentang BPN, Keputusan kerpala BPN RI No. 34 tahun 2007 tentang petunjuk teknis penanganan dan penyelesain masalah Pertanahan.
  1. Negotiation
    • Tahapan penyelesaian
    • Contoh permasalahan dan Studi kasus
  1. Mediation
    • Langkah penyelesaian
    • Studi kasus

Peserta :
Divisi Hukum dari suatu lembaga/instansi, Legal Officer/administration diperusahaan, kantor hukum,
atau pihak-pihak yang terlibat dalam permasalahan mengenai hak atas tanah ataupun persengketaan tanah.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Collaboration MS Office And Effective Presentation (BANDUNG)

Jadwal Training

Collaboration MS Office And Effective Presentation (BANDUNG) TUJUAN TRAINING : Setelah mengikuti Paket pendidikan dan pelatihan ini diharapkan para peserta mampu: Mampu menggunakan aplikasi program ... Baca Selengkapnya

Collaboration MS Office And Effective Presentation (BANDUNG)

Jadwal Training

Collaboration MS Office And Effective Presentation (BANDUNG)

TUJUAN TRAINING :

Setelah mengikuti Paket pendidikan dan pelatihan ini diharapkan para peserta mampu:

  1. Mampu menggunakan aplikasi program komputer untuk pengetikan surat, laporan, dan sebagainya
  2. Mampu menggunakan aplikasi program komputer untuk membuat spreadsheet
  3. Mampu menggunakan aplikasi program komputer untuk pengelolaan database dan e mail
  4. Mampu menggunakan aplikasi program komputer untuk presentasi

METODE TRAINING :

  • Metode pada pelatihan ini antara lain: lektur, workshop, studi kasus dan diskusi serta konsultasi interaktif.
  • Teknik penggunaan waktu secara ekonomis, akan dibahas agar dihasilkan laporan yang ringkas, jelas, informatif dan efektif.

SIAPA YANG SEHARUSNYA MENGIKUTI PELATIHAN INI ? :
Manajer, staf fungsional & staf operasional

CAKUPAN MATERI TRAINING :

  1. Materi & Silabus Ms Office Word:
    1. PENGENALAN MS WORD: Tombol Ms Office, Quick Access Toolbar (Shortcut), Memahami Isi Ribbon
    2. PENGELOLAAN DOKUMEN: Membuat Dokumen Baru, Membuka Dokumen, Menyimpan Dokumen, Bekerja dengan dokumen
    3. PENGEDITAN DOKUMEN: Pengetikan Dokumen, Memasukkan dan mengganti teks
    4. PEMFORMATAN TEKS: Styles, Pengubahan Jenis dan Ukuran Huruf, Pengubahan Warna Teks,
    5. PEMFORMATAN PARAGRAF: Pengubahan Perataan Paragraf, Menambah Border dan Shading, Mengubah Spasi dalam Paragraf
    6. PENGELOLAAN TABEL: Membuat Tabel, Memasukkan Data ke dalam Tabel, Memodifikasi Struktur Tabel
    7. PENGELOLAAN GRAFIK: Simbol dan Karakter Spesial, Memasukkan bentuk gambar, Memasukkan Gambar, Smart Art
    8. PEMFORMATAN HALAMAN: Memodifikasi Margin Halaman dan Orientasi, Mengubah Orientasi, Ukuran Halaman, atau Kolom, Memasukkan Informasi Header dan Footer, Page Break, Memasukkan Halaman Cover
    9. PEMBUATAN DAFTAR ISI: Membuat Daftar Isi, Menghapus Daftar Isi
  2. Materi & Silabus Ms Office Excel:
    1. PENGENALAN MS EXCEL : Spreadsheet, Tombol Ms Office, Ribbon, Quick Access Toolbar
    2. BEKERJA DENGAN WORKBOOK: Membuat Workbook, Menyimpan Workbook, Membuka Workbook, Memasukkan Data
    3. MANIPULASI DATA: Memilih Data, Memilih Sebuah Baris atau Kolom, Menyalin Data, Auto Fill
    4. MEMODIFIKASI WORKSHEET: Memasukkan Sel, Baris, dan Kolom, Menghapus Sel, Baris, atau Kolom, Mencari dan Menggantikan (Find and Replace)
    5. MELAKUKAN KALKULASI: Formula Excel, Kalkulasi dengan Fungsi
    6. MEMBUAT GRAFIK: Memasukkan Grafik, Memberi Judul dan Keterangan Grafik
    7. MEMFORMAT WORKSHEET: Mengubah Teks ke Kolom, Memodifikasi Huruf, Memformat Sel, Menambahkan Border dan Warna ke Sel, Mengubah Lebar Kolom dan Tinggi Baris, Menyembunyikan atau Menampilkan Baris atau Kolom,
    8. MENGEMBANGKAN WORKBOOK: Mengganti Nama Worksheet, Mengganti Warna Tab Worksheet, Mengubah Posisi Worksheet dalam Workbook, Menyalin Worksheet
    9. MENGATUR DAN MENCETAK: Mengatur Pencetakan Title, Menciptakan Header atau Footer, Margin Halaman, Mengubah Orientasi Halaman
  3. Materi & Silabus Ms Office Powerpoint (efektive Presentasi) :
    1. PENGENALAN MS POWERPOINT : Tombol Ms Office, Ribbon, Quick Access Toolbar, Slide Views
    2. BEKERJA DENGAN TEKS: Memasukkan Teks, Menyalin dan Memindahkan Data, Pengubahan Jenis dan Ukuran Huruf, Pengubahan Warna Teks, WORD ART, PENGUBAHAN PERATAAN (ALIGNMENT) PARAGRAF
    3. BEKERJA DENGAN GRAPHICS: Menambahkan Gambar, Menambahkan Clip Art, Mengedit Gambar dan Clip Art, Menambahkan Shape, Menambahkan Smart Art,
    4. TABEL: Menciptakan Tabel, Memasukkan Data ke Dalam Tabel, Memodifikasi Struktur Tabel, Memformat Tabel
    5. DIAGRAM: Membuat Diagram, Mengedit Diagram, Memodifikasi Diagram, Memodifikasi Ukuran Diagram, Memodifikasi Label dan Judul
    6. EFEK SLIDE: Transisi Slide, Custom Animation, Preview Animasi, Slide Show Options
    7. BEKERJA DENGAN CONTENT JENIS LAINNYA : Mengubah Format Background Slides, Memformat Transisi, Memberi Effect Suara Pada Saat Transisi Slides, Mengatur Transisi Dan Effect, Effect Mengubah Ukuran Text box, Menambahkan Video audio
  4. Collaboration MS Office (MS Word, MS Excel dan MS Power Point)
    1. Menyisipkan data MS Excel dalam MS Word dan MS Word dalam MS Excel
    2. Menyisipkan data MS Excel (Grafik dll) dalam MS Power Point
    3. Efektive Presentasi dengan MS Power Point dengan menggunakan Link data dari MS Word dan MS Excell

INSTRUCTOR :   Hasan Balubita, S.Si, M.Kom. and Team

TEMPAT TRAINING :Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

DURASI TRAINING :   3 hari

WAKTU TRAINING : 

  • 18 Jul 2016-20 Jul 2016
  • 31 Aug 2016-02 Sep 2016
  • 21 Sep 2016-23 Sep 2016
  • 19 Oct 2016-21 Oct 2016
  • 14 Nov 2016-16 Nov 2016
  • 19 Dec 2016-21 Dec 2016

HARGA INVESTASI/PESERTA : 

  1. Rp. 5.950.000/peserta (bayar penuh) atau
  2. Rp. 5.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp. 5.500.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Hasan Balubita, S.Si, M.Kom. adalah  seorang magister Komputer Program Rekayasa Sistem Informasi, kini beliau menjabat sebagai Dosen jurusan Teknologi Sistem Informasi di Politeknik Praktisi Bandung. Pendidikan non formal yang beliau tekuni di bidang IT adalah Web Master di ITB, Pelatihan Bahasa Pemrograman Java dll.Beliau sudah sering kali menjadi instruktur pelatihan untuk perusahaan-perusahaan di Indonesia lewat topic-topik training yang beliau kuasai, seperti : Filing Arsip Digital dan Document Control, Aplikasi MS Office, Database MS Access, Advance MS Excell, Pendataan Aset dan Pelaporan Aset dan lain-lain.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Tatacara Penyusunan Silabus Diklat (BANDUNG)

Jadwal Training

Tatacara Penyusunan Silabus Diklat (BANDUNG) Keberhasilan suatu organisasi sangat ditentukan oleh  sumber daya manusia yang profesional. Salah satu upaya yang dapat dilakukan adalah melalui pelatihan ... Baca Selengkapnya

Tatacara Penyusunan Silabus Diklat (BANDUNG)

Jadwal Training

Tatacara Penyusunan Silabus Diklat (BANDUNG)

Keberhasilan suatu organisasi sangat ditentukan oleh  sumber daya manusia yang profesional. Salah satu upaya yang dapat dilakukan adalah melalui pelatihan / DIKLAT. Dalam melakukan desain penyusunan silabus diklat yang berkaitan dengan materi yang akan disampaikan dalam pelatihan tersebut, maka diperlukan acuan yang jelas sehingga materi yang disampaikan dapat sesuai dan peserta pelatihan bisa mendapatkan jaminan pelatihan yang telah terencana dengan baik. Dalam proses mendesain silabus diklat, ada beberapa hal yang menjadi kunci utama dan sangat perlu untuk diperhatikan yaitu materi pelatihan apa saja yang akan disampaikan yang telah disesuaikan dengan perubahan dan perkembangan zaman, metode pelatihan yang akan digunakan dalam penyampaian diklat dimana metode yang digunakan harus tepat sehingga materi pelatihan dapat diserap dengan sempurna oleh para peserta, proses pembelajaran setiap materi dan proporsi alokasi waktu pemberian diklat.

TUJUAN TRAINING :
Setelah  mengikuti pelatihan ini peserta diharapkan mampu untuk mendesain penyusunan silabus pelatihan yang tepat sesuai dengan materi yang dibutuhkan, metode pelatihan yang digunakan, proses pembelajaran serta proporsi alokasi waktu yang tepat.

METODE TRAINING :
Metode pada pelatihanini antara lain:Presentasi, Worksho ,Studi Kasus

SIAPA YANG SEHARUSNYA MENGIKUTI PELATIHAN INI ? :
Human Resource, Human Capital dan Line Staff/Supervisors/Managers yang terlibat dalam pengembangan SDM. Para eksekutif dan manajer unit bisnis strategis.

CAKUPAN MATERI TRAINING :

  1. Pengertian penyusunan silabus.
  2. Manfaat mendesain penyusunan silabus diklat.
  3. Kedudukan penyusunan dalam silabus diklat.
  4. Penjelasan konsep model pelatihan.
  5. Workshop Mendesain penyusunan silabus diklat.
  6. Workshop Proses evaluasi program pelatihan
  7. Workshop Penyusunan silabus diklat berorientasi pembelajaran.
  8. Workshop Penjelasan pengisian format penyusunan.
  9. Workshop Pemilihan media pembelajaran DIKLAT.

INSTRUCTOR :   Hasan Balubita, S.Si, M.Kom. and Team

TEMPAT TRAINING :Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

DURASI TRAINING :3 hari

WAKTU TRAINING : 

  • 27 Jul 2016-29 Jul 2016
  • 22 Aug 2016-24 Aug 2016
  • 13 Sep 2016-15 Sep 2016
  • 10 Oct 2016-12 Oct 2016
  • 07 Nov 2016-09 Nov 2016
  • 13 Dec 2016-15 Dec 2016

HARGA INVESTASI/PESERTA : 

  1. Rp. 5.950.000/peserta (bayar penuh) atau
  2. Rp. 5.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp. 5.500.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Hasan Balubita, S.Si, M.Kom. adalah  seorang magister Komputer Program Rekayasa Sistem Informasi, kini beliau menjabat sebagai Dosen jurusan Teknologi Sistem Informasi di Politeknik Praktisi Bandung. Pendidikan non formal yang beliau tekuni di bidang IT adalah Web Master di ITB, Pelatihan Bahasa Pemrograman Java dll.Beliau sudah sering kali menjadi instruktur pelatihan untuk perusahaan-perusahaan di Indonesia lewat topic-topik training yang beliau kuasai, seperti : Filing Arsip Digital dan Document Control, Aplikasi MS Office, Database MS Access, Advance MS Excell, Pendataan Aset dan Pelaporan Aset dan lain-lain.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Administrasi Perkantoran (YOGYAKARTA)

Jadwal Training

Administrasi Perkantoran (YOGYAKARTA) JADWAL 14-16 Juni 2016 26-28 Juli 2016 23-25 Agustus 2016 20-22 September 2016 18-20 Oktober 2016 15-17 November 2016 20-22 Desember 2016 ... Baca Selengkapnya

Administrasi Perkantoran (YOGYAKARTA)

Jadwal Training

Administrasi Perkantoran (YOGYAKARTA)

JADWAL
14-16 Juni 2016
26-28 Juli 2016
23-25 Agustus 2016
20-22 September 2016
18-20 Oktober 2016
15-17 November 2016
20-22 Desember 2016

LOKASI
Yogyakarta

WAKTU
08.30-16.00 WIB

BIAYA
Yogyakarta >> IDR 6.500.000,-(Non-Residential)|Minimal kuota 3 peserta
*Luar Kota Yogyakarta >> IDR 8.500.000,-(Non-Residential)|Minimal kuota 4-5 peserta

DESKRIPSI
Fungsi administrasi turut memegang andil dalam sukses perusahaan. Oleh karena itu, staff di bagian administrasi bukan hanya dituntut untuk terampil menyelesaikan tugas-tugasnya di kantor, namun juga perlu memiliki sikap positif terhadap pekerjaan. Ia harus bisa merencanakan, mengorganisir serta mengontrol seluruh pekerjaan dengan baik, agar seluruh pekerjaan dapat diselesaikan dengan cepat dan tepat. Dengan mengikuti pelatihan ini diharapkan peserta dapat lebih terampil dalam mengelola administrasi kantor.

MATERI KURSUS

  1. Ruang lingkup pekerjaan administrasi perkantoran.
  2. Fungsi administrasi perkantoran dengan memperhatikan 5R: Ringkas, rapi, resik, rawat, rajin.
  3. Administrasi personalia: administrasi rekrutmen, administrasi pelatihan, administrasi penggajian.
  4. Administrasi pembelian: surat menyurat dalam proses pembelian, pembuatan purchase order, work order.
  5. Administrasi penjualan: pembuatan proposal, surat penawaran, quotation harga,
  6. Manajemen arsip: Sistem pemberkasan, index, pola klasifikasi, penemuan kembali, penyusutan arsip.
  7. Operasionalisasi kantor: Perancangan dan pengendalian formulir, ekspedisi & perjalanan dinas.

PESERTA
Pelatihan ini sangat tepat untuk diikuti oleh pegawai yang lingkup pekerjaannya meliputi bidang kepegawaian (HRD), Humas baik level supervisor maupun manajer

METODE
Presentation; Discussion; Case Study;Evaluation; Pre test & Post Test

FASILITAS
Hotel Berbintang; Sertifikat Training; Training Kit; Modul (Hard Copy + Soft Copy); 1x Lunch dan 2x Coffe Break; Souvenir; Transportasi Antar Jemput (minimal 2 orang dari perusahaan yang sama)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

How To Create Budgeting Plan To Boost Your Profit (SURABAYA)

Jadwal Training

Kita sering kali melupakan betapa penting nya MEMBUAT & MENYUSUN ANGGARAN PERUSAHAAN yang TEPAT, padahal pada kenyataannya PENYUSUNAN ANGGARAN PERUSAHAAN yg TEPAT bisa MENINGKATKAN PROFIT ... Baca Selengkapnya

How To Create Budgeting Plan To Boost Your Profit (SURABAYA)

Jadwal Training

Kita sering kali melupakan betapa penting nya MEMBUAT & MENYUSUN ANGGARAN PERUSAHAAN yang TEPAT, padahal pada kenyataannya PENYUSUNAN ANGGARAN PERUSAHAAN yg TEPAT bisa MENINGKATKAN PROFIT perusahaan Anda.

Mengingat kita sudah memasuki SEMESTER 2 DITAHUN 2016 ini, alangkah baiknya apabila kita mampu menyusun anggaran perusahaan yg LEBIH TEPAT dari semester  yg lalu.

Seminar “How To Create Budgeting Plan To Boost Your Profit” ini akan membahas:

    1. Mengatur & Membuat BUDGET yang REALIABLE untuk diterapkan di Perusahaan Anda
    2. Mengetahui KESALAHAN-KESALAHAN FATAL yang terjadi ketika membuat BUDGET
    3. Bagaimana cara MEMILIH POS-POS yang ada di dalam BUDGET secara TEPAT & AKURAT?
    4. Bagaimana cara Menganalisa & Mengupdate BUDGET Anda & Mengevaluasi VALIDITAS dari BUDGET PERUSAHAAN Anda?
    5. TRIK-TRIK CERDIK bagaimana mengelola BUDGET secara OPTIMAL
    6. TEKNIK MENGANALISA hasil realisasi laporan Keuangan & BUDGET yang telah dibuat & bagaimana menyikapinya?
  • LATIHAN & STUDI KASUS ttg BUDGETING YG TERJADI DIPERUSAHAAN-PERUSAHAAN
  • AKAN DIBAHAS TENTANG BIAYA PAJAK YG TERKAIT DGN TAX AMNESTY

Workshop satu hari ini MUTAK diikuti oleh:
Finance & Accounting Mgr & Staff, Administration Mgr & Staff, Pimpinan, Wakil Pimpinan, Manajer dari berbagai divisi/ departemen & siapa saja yang berkepentingan dalam membuat Anggaran Perusahan / organisasi.

Dilaksanakan pada:
Hari / tgl    : KAMIS, 28 Juli 2016
Waktu        : 08.00 – 17.00 WIB
Tempat        : Hotel Tunjungan – Surabaya

Fasilitator:
Dedy Sidarta, SE. BKP

  • Expert in optimization System Operational Procedure and Financin, Accounting Procedure, Accounting, Auditing & Taxing
  • Certified ERP Consulting from Orlansoft ERP Data System

Investasi:
Normal Price : Rp. 2.595.000/org
Special Price: Rp. 1.595.000,-/org atau
Rp. 1.295.000,-/org (utk pendaftaran minim 2 org) & DAPATKAN FREE SOFTWARE BUDGETING SENILAI Rp 3.000.000,- yg dpt digunakan diperusahan Anda (hanya utk 20 Pembayar pertama)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

10 Kesalahan Fatal Manajer / Supervisor Dalam Mengelola Bawahan (SURABAYA)

Jadwal Training

Kinerja Anda sebagai Supervisor/Manager tidak hanya dinilai dari Prestasi Anda sendiri, namun seberapa besar Bawahan Anda dapat memaksimalkan potensi dalam melakukan pekerjaannya. Ilmu dan Seni ... Baca Selengkapnya

10 Kesalahan Fatal Manajer / Supervisor Dalam Mengelola Bawahan (SURABAYA)

Jadwal Training

Kinerja Anda sebagai Supervisor/Manager tidak hanya dinilai dari Prestasi Anda sendiri, namun seberapa besar Bawahan Anda dapat memaksimalkan potensi dalam melakukan pekerjaannya.

Ilmu dan Seni dalam Mengelola Bawahan di berbagai bidang di Perusahaan akan diungkap dengan pembahasan contoh-contoh kasus yang terjadi di lapangan secara DETIL & PRAKTIS di Seminar:

10 Kesalahan Fatal Manajer / Supervisor Dalam Mengelola Bawahan

Materi akan didapat sbb:

  • Apa Beda MANAJER & LEADER?
  • Keterampilan-keterampilan Apa Saja Yang Mutlak Diikuti Seorang LEADER?
  • Keterampilan-keterampilan Apa Saja Yang Mutlak Diikuti Seorang MANAJER & SUPERVISOR?
  • Bagaimana Melakukan Komunikasi Yang Efektif Dengan Bawahan/Staf?
  • Apa Saja 10 Kesalahan Fatal Yang Sering Dilakukan Manajer/Supervisor Dalam MEMIMPIN & MENGELOLA Bawahannya? Dan Bagaimana Mengatasinya?

Seminar ini sangat cocok diikuti oleh:
Manajer, Supervisor, KaDept, KaDiv, KaBag, Pemasaran, Penjualan, Keuangan, Operasional, HRD/GA, Pimpinan Perusahaan, Wakil Pimpinan, Owner, Decision Maker, dari berbagai jenis usaha Barang & Jasa, juga generasi ke-2 atau generasi ke-3 dari Perusahaan Keluarga atau Entrepreneur yang baru memulai bisnisnya.

Dilaksanakan pada:
Hari / tgl    : JUM’AT, 22 Juli 2016
Waktu        : 08.30 – 12.00 WITA
Tempat    : Hotel Ibis Styles, Jl. Teuku Umar No. 183 Denpasar

Fasilitator:
Herman Josep Soewono

  • Praktisi Penjualan > 15 thn dan Director & Sales Trainer of PRO-M SURABAYA
  • Trainer tentang Managerial Skills di berbagai Perusahaan dan berbagai Jenis Usaha

INVESTASI – ONLY FIRST 20 PERSON
Normal Price:       Special Price:
Rp. 695.000,-/org      Rp. 495.000,-/org
Harga Khusus Rp 295.000,-/org  (Untuk Keikutsertaan Min. 2 org)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas, Oil and Water Pipeline Design And Maintenance (BANDUNG)

Jadwal Training

Gas, Oil and Water Pipeline Design And Maintenance (BANDUNG) Tanggal 26 Jul 2016-29 Jul 2016 01 Aug 2016-04 Aug 2016 13 Sep 2016-16 Sep 2016 ... Baca Selengkapnya

Gas, Oil and Water Pipeline Design And Maintenance (BANDUNG)

Jadwal Training

Gas, Oil and Water Pipeline Design And Maintenance (BANDUNG)

Tanggal

  • 26 Jul 2016-29 Jul 2016
  • 01 Aug 2016-04 Aug 2016
  • 13 Sep 2016-16 Sep 2016
  • 10 Oct 2016-13 Oct 2016
  • 31 Oct 2016-03 Nov 2016
  • 05 Dec 2016-08 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
To fulfill the oil and gas demand for power generation, recovery processes, and other uses, pipelines are utilized to transport the supply from their source.  These pipelines are mostly buried and operate without disturbing normal pursuits.

Construction procedures for most pipeline systems can be adapted to consider specific environmental conditions and are tailored to cause minimal impact on the environment.

Unattended pumping stations move large volumes of oil and petroleum products under high pressure.  Many factors have to be considered in the engineering and design of long-distance pipelines, including the nature and volume of fluid to be transported, the length of pipeline, the types of terrain traversed and the environmental constraints.  Major factor influencing pipeline system design are: Fluid properties, design condition, supply and demand magnitude/location, Code and standards, Route, topography and access, environmental impact, economic, hydrological impact, seismic and volcanic impacts.

To obtain optimum results for a pipeline transmission system, complex economic and engineering studies are necessary to decide on the pipeline diameter, material, compression/pumping power requirements and location of the pipeline route.

TRAINING MATERIAL OUTLINE :

  1. Overview of Problems in Gas, Oil and Produced Water Pipeline Operations and Maintenance
  2. The Pipeline Design Approach and Considerations
  3. Design of Gas Transmission Pipeline
  4. Design of Crude, Oil and Produced Water Transportation Pipeline
  5. Valves, Flanges and Fittings Selection for Crude, Oil, Gas and Produced Water Pipeline Design

INVESTATION PRICE/PERSON :

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Bag
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Internal And External Corrorion Control And Monitoring For Pipeline And Surface Facility (BANDUNG)

Jadwal Training

Internal And External Corrorion Control And Monitoring For Pipeline And Surface Facility (BANDUNG) Tanggal 19 Jul 2016-22 Jul 2016 08 Aug 2016-11 Aug 2016 19 ... Baca Selengkapnya

Internal And External Corrorion Control And Monitoring For Pipeline And Surface Facility (BANDUNG)

Jadwal Training

Internal And External Corrorion Control And Monitoring For Pipeline And Surface Facility (BANDUNG)

Tanggal

  • 19 Jul 2016-22 Jul 2016
  • 08 Aug 2016-11 Aug 2016
  • 19 Sep 2016-22 Sep 2016
  • 17 Oct 2016-20 Oct 2016
  • 07 Nov 2016-10 Nov 2016
  • 13 Dec 2016-16 Dec 2016

Tempat Pelaksanaan:
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
This course focuses on corrosion – from either internal or external source – and its potential problem, and the protection methods to stop or control them. Review on corrosion and technique by which it can be identified, monitored and controlled will be given in detail. Active participation is encouraged through case studies and examples especially on the use of painting and coatings, transformer-rectifier of impressed current, magnesium, zinc and alum sacrificial anodes for external protection, and the injection of corrosion inhibitors and biocides for internal corrosion control.

PRE-REQUISITE :
NONE. No previous training in corrosion control is required. However, to gain the most from this course, a basic understanding of physics, chemistry and basic unit operations will be helpful.

TRAINING MATERIAL OUTLINE :

  1. Review of oil & gas surface production facility and operations.
  2. Review of metallic materials used in surface production facility and pipelines and the corrosion problem usually happen.
  3. Case studies and examples of oil & gas material failure caused by corrosion from internal and external source.
  4. Uniform, galvanic and localized corrosion failures.
  5. Internal corrosion of pipeline, vessel and processing equipment caused by sour component, H2S, CO2, organic acid, brine, and the SRB (sulfate reducing bacteria).
  6. External corrosion of underground, underwater and under-seawater pipeline and structure caused by impurities in soil and water environment.
  7. External corrosion of topside structure caused by marine atmosphere.
  8. Basic electrochemistry of corrosion process, Ohm’s law and the corrosion rate.
  9. Corrosion control and prevention with painting & coatings and the cathodic protection.
  10. Measurement of corrosion potential and corrosion current.
  11. Protection with sacrificial anode and impressed current.
  12. Understanding NACE Standard RP-01-69 to stop external corrosion attack.
  13. Requirement, design and criteria of cathodic protection.
  14. Sacrificial anode specification, installation and construction.
  15. Testing, monitoring, and inspection of cathodic protection.
  16. Inspection and maintenance of transformer-rectifier and sacrificial anode.
  17. Field test, measurement techniques and instrument.
  18. Data recording and evaluation of cathodic protection system.
  19. Case studies of corrosion control and prevention with cathodic protection.
  20. Internal corrosion problem in the pipeline and surface facility.
  21. Oil/gas/water fluid properties and the corrosion tendency.
  22. Deterioration by H2S, CO2, and acidic corrosive components.
  23. Pipeline leakage and rupture by microbial induced corrosion.
  24. Corrosion caused by SRB and the pitting mechanism.
  25. Corrosion caused by oxygen penetration.
  26. Examples and case studies of equipment corrosion damage and pipeline leakage.
  27. Understanding NACE Standard RP-0775 for internal corrosion control and monitoring.
  28. Practical internal corrosion monitoring methods.
  29. Access fittings, corrosion coupon and corrosion probes.
  30. Practical internal corrosion control and prevention methods.
  31. Internal corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals.
  32. Dosage and injection methods of corrosion inhibitors.
  33. SRB control with biocides and the selection of suitable and low risk biocide formula.
  34. Dosage and injection methods of biocides.
  35. Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger chemicals.
  36. Dosage and injection methods of oxygen scavenger.
  37. Safety in the use of chemicals for internal corrosion prevention.
  38. Review of gas dehydration process and operations.
  39. Internal corrosion problem in glycol contactor (dehydration) unit.
  40. Method and materials use to control the corrosiveness of rich glycol solution.
  41. Review of amine sweetening process and operations.
  42. Internal corrosion problem in amine sweetening unit.
  43. Method and materials use to control the corrosiveness of rich amine solution.
  44. Examples and case studies of internal corrosion control

WHO SHOULD ATTEND THIS TRAINING?:

  1. Anyone who needs to recognize corrosion and understand its devastating potential, especially as it relates to his or her area of responsibility, in oil and gas surface production facility and pipelines.
  2. Anyone involved in combating and controlling corrosion from internal and external source.
  3. Technicians and field operators and engineers of any discipline.
  4. Onshore / offshore facility and pipeline cathodic protection inspectors.
  5. Onshore / offshore structure painting and coating applicators and inspectors.
  6. Amine sweetening, glycol dehydration and gas processing plant operators.
  7. Beginners who interested in.

TRAINING DURATION : 4 days

INVESTATION PRICE/PERSON :

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Sweetening : H2S AND CO2 Removal in Chemical, Oil and Gas (BANDUNG)

Jadwal Training

Gas Sweetening : H2S AND CO2 Removal in Chemical, Oil and Gas (BANDUNG) Tanggal 18 Jul 2016-21 Jul 2016 29 Aug 2016-01 Sep 2016 05 ... Baca Selengkapnya

Gas Sweetening : H2S AND CO2 Removal in Chemical, Oil and Gas (BANDUNG)

Jadwal Training

Gas Sweetening : H2S AND CO2 Removal in Chemical, Oil and Gas (BANDUNG)

Tanggal

  • 18 Jul 2016-21 Jul 2016
  • 29 Aug 2016-01 Sep 2016
  • 05 Sep 2016-08 Sep 2016
  • 03 Oct 2016-06 Oct 2016
  • 29 Nov 2016-02 Dec 2016
  • 27 Dec 2016-30 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION :
With increasing demands to natural gas in Indonesia, sour gases are being tapped for utilization after purification. But, the natural gas that is transported to the fuel market must meet legal and safety requirements; it must be non-toxic, non-corrosive and safe to environment. For that reasons, gas conditioning or specifically gas treating is a very important step in gas processing scheme. H2S, and CO2, are removed to certain level through a gas sweetening process. There are many processes available. The amines (MEA, DEA, MDEA) are the most popular solutions and thus commonly used in many fields. This course is designed as an effective practical shortcut to understand the amine sweetening process and all features and problems encountered in amine plant operations for engineers, operators, technicians, and anyone who involve or responsible  in H2S and CO2 removal.

The course content and approach are designed to suit participants of different background and different position in the company. It will be delivered as a to-the-point explanation by a professional instructor, utilizing an easy-to-understand examples and illustrations, especially the actual findings in Indonesia.

TRAINING OBJECTIVES :
By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more about the principles of amine sweetening, identify and discuss the function of each component used in the process, and trace process flow through a typical amine unit, discuss and consult their specific problems they are about to bring to the class, and share experiences with others.

After completion of this course, participants will understand how each component in the unit operates, the effects of process variables, what and how to monitor the unit and make necessary adjustments, what and how to perform routine maintenance, and trobleshooting common problems affecting proper operation of the unit, in order to achieve the goals of gas sweetening.

TRAINING HIGHLIGHT :

  1. Production of Transportable and Salable Gas Stream
  2. Legal and Safety Requirements in Gas Fuel Market
  3. Overview of Natural Gas Processing and Gas Treating
  4. The Principles of Reaction Type Gas Sweetening
  5. Amine Sweetening Process Flow and Components
  6. Amine Sweetening Plant Operation and Controls
  7. Amine Conditioning and Amine Losses Control
  8. Plant Maintenance and Troubleshooting

TRAINING MATERIAL OUTLINE :

  1. Lean-rich and high-low pressure natural gas product
  2. Gas-well gas and associated gas
  3. Typical near well surface production operations and facility
  4. Examples of gas producing schemes
  5. Sales specifications, environmental requirements and economics
  6. Gas sale contract and limitation of H2S and CO2 contents
  7. Gas condensate and natural gas liquid recovery
  8. Refrigeration, expansion and expansion-turbine cooling for condensate recovery
  9. Gas processing, conditioning and treating
  10. Objectives of the gas process
  11. Reaction type sweetening and the mechanisms of H2S and CO2 removal
  12. The principles of absorption process with alkanolamines
  13. Typical sweetening unit and the process variables
  14. Inlet separator, contactor column and flash tank
  15. The role of inlet gas temperature and inlet amine temperature
  16. Filters and lean/rich heat exchanger
  17. Stripper column and reflux condenser/accumulator
  18. Reboiler, reclaimer, and surge tank
  19. The role of reboiler, reclaimer and heat exchanger temperatures
  20. Circulation pump and trim cooler
  21. The role of contactor, stripper, filter and flash tank pressures
  22. The problem of amine losses
  23. Reducing amine losses and amine tests
  24. The problem of foaming and control of foaming tendency
  25. Maintenance and troubleshooting of amine unit
  26. Safety for working at amine unit
  27. Recommendation for startup and shutdown
  28. Relative performance of alkanolamines

INVESTATION PRICE/PERSON :   

  • Rp 8.750.000/person (full fare)  or
  • Rp 8.500.000/person (early bird, payment 1 week before training) or
  • Rp 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pipeline Internal Corrosion Control And Monitoring (BANDUNG)

Jadwal Training

Pipeline Internal Corrosion Control And Monitoring (BANDUNG) Tanggal 26 Jul 2016-29 Jul 2016 01 Aug 2016-04 Aug 2016 13 Sep 2016-16 Sep 2016 10 Oct ... Baca Selengkapnya

Pipeline Internal Corrosion Control And Monitoring (BANDUNG)

Jadwal Training

Pipeline Internal Corrosion Control And Monitoring (BANDUNG)

Tanggal

  • 26 Jul 2016-29 Jul 2016
  • 01 Aug 2016-04 Aug 2016
  • 13 Sep 2016-16 Sep 2016
  • 10 Oct 2016-13 Oct 2016
  • 14 Nov 2016-17 Nov 2016
  • 19 Dec 2016-22 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Jam Pelaksanaan
08:30-16:30 WIB

Pembicara / Fasilitator
Hilman Ahmad, PhD., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

INVESTATION PRICE/PERSON :

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

TRAINING DESCRIPTION AND BENEFITS :

  1. This course is for either corrosion engineers or non corrosion engineering personnel who involve in oil & gas operations and maintenance, pipeline and asset integrity management, pipeline inspection and pigging, material purchasing, chemical selection and injection, hazard and HSE management, and any corrosion related activity.
  2. By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more detail about internal corrosion control and monitoring, and understand how to select and use of corrosion inhibitors and chemicals.
  3. After completion of this course, participants will understand what internal corrosion is, how to detect, predict and monitor their growth, and how to control these serious problems in the pipeline.

TRAINING HIGHLIGHTS :

  1. Internal Corrosion Problem in the Pipeline
  2. H2S, CO2, and Acidic Corrosive Components
  3. Sour Corrosion and Microbial Induced Corrosion
  4. Equipment and Pipeline Leakage and Rupture by Corrosion
  5. Fluid Properties and the Corrosion Tendency
  6. Internal Corrosion Monitoring and Corrosion Prediction
  7. Internal Corrosion Control and Prevention Methods

TRAINING MATERIAL OUTLINE :

  1. Oil, condensate, gas, and water flowing in the pipeline
  2. Corrosion in water re-injection system and the injection line
  3. Corrosion in sea water injection system
  4. The role of H2S, CO2, and acidic impurities in the fluid
  5. Nature of H2S corrosion, pitting and stress corrosion cracking
  6. Nature of CO2 corrosion
  7. Sour corrosion and top of line corrosion problems
  8. Microbial induced corrosion mechanism and its related problems
  9. Corrosion caused by SRB and the pitting mechanism
  10. Corrosion caused by oxygen penetration
  11. Examples of corrosion damage and pipeline leakage
  12. Corrosion monitoring methods in oil & gas field
  13. Oil & gas filed corrosion prevention methods
  14. Corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals
  15. Dosage and injection methods of corrosion inhibitors
  16. SRB control with biocides and the selection of suitable and low risk biocide formula
  17. Dosage and injection methods of biocides
  18. Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger
  19. Dosage and injection methods of oxygen scavenger
  20. Safety in oil & gas corrosion prevention

TRAINING METHOD, MATERIALS AND PROGRAM

  1. The course will be delivered in the form of classroom exposition, case studies and open discussion. Course materials will be handed out as hard and soft copy.
  2. The course will be given in Bahasa Indonesia. In special case, upon request, it will be in English.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Oil Spill – Oil Boom And Environmental Management (BANDUNG)

Jadwal Training

Oil Spill – Oil Boom And Environmental Management (BANDUNG) Tanggal 18 Jul 2016-21 Jul 2016 29 Aug 2016-01 Sep 2016 05 Sep 2016-08 Sep 2016 ... Baca Selengkapnya

Oil Spill – Oil Boom And Environmental Management (BANDUNG)

Jadwal Training

Oil Spill – Oil Boom And Environmental Management (BANDUNG)

Tanggal

  • 18 Jul 2016-21 Jul 2016
  • 29 Aug 2016-01 Sep 2016
  • 05 Sep 2016-08 Sep 2016
  • 03 Oct 2016-06 Oct 2016
  • 07 Nov 2016-10 Nov 2016
  • 13 Dec 2016-16 Dec 2016

Jam Pelaksanaan
08.30 – 16.00 WIB

TEMPAT
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :
4 hari

Pembicara / Fasilitator
Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

INVESTATION PRICE/ PERSON :  

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 persons or more from the same company)

OBJECTIVE :
After attending the training, participants have knowledge about oil characteristic, environmental impacts, fate of oil in the environment, and how to manage oil spill /oil boom including prevention and countermeasure as well as contingency planning and responding to oil spill/boom

TRAINING MATERIAL OUTLINE :

  1. Oil Characteristic: Petroleum and Non Petroleum Oil
  2. The Behavior and Effect of Oil Spill and Oil Boom in the Aquatic Environment
    • Impact on Species
    • Impact on Habitats
  3. Oil Spill and Boom Location: Geology of Shorelines, The Fate of Spilled Oil Cleaning Up, Containment and Recovery of Oil Spills and Booms Response Techniques
    • Booms
    • Skimmers
    • Sorbets
    • Dispersing Agents
    • Gelling Agents
    • Biological Aspects
  4. Alternative Countermeasures for Oil Spills and Oil Booms
  5. Shoreline Cleanup of Oil Spills and Oil Booms
  6. Preparing for Oil Spills and Booms: Contingency Planning
  7. Responding to Oil Spills and Oil Booms
  8. Remediation
  9. Case Study in the Field
  10. Discussion

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2026

Info Seminar | Jadwal Seminar