Supervisi Proyek Bangunan Gedung (YOGYAKARTA)

Jadwal Training

Supervisi Proyek Bangunan Gedung (YOGYAKARTA) Tanggal 10 Sep 2018-12 Sep 2018 01 Oct 2018-03 Oct 2018 12 Nov 2018-14 Nov 2018 10 Dec 2018-12 Dec ... Baca Selengkapnya

Supervisi Proyek Bangunan Gedung (YOGYAKARTA)

Jadwal Training

Supervisi Proyek Bangunan Gedung (YOGYAKARTA)

Tanggal

  • 10 Sep 2018-12 Sep 2018
  • 01 Oct 2018-03 Oct 2018
  • 12 Nov 2018-14 Nov 2018
  • 10 Dec 2018-12 Dec 2018

Tempat
Yogyakarta (Jogjakarta Plaza Hotel/ Ibis Hotel Yogyakarta/Ibis Styles Yogyakarta Hotel/Mutiara Hotel/ Melia Purosani Hotel)

TRAINING DURATION
3  days

INTRODUCTION :
Pada suatu proyek pembangunan bangunan gedung tentunya harus dikerjakan dengan benar supaya dapat diperoleh hasil pembangunan yang memuaskan sesuai dengan yang diharapkan yaitu berkualitas, tepat waktu dan tepat biaya. Untuk itu dalam pelaksanaan suatu proyek harus diawasi dengan baik sehingga pelaksanaan pekerjaan akan sesuai dengan spesifikasi, gambar dan kontrak yang disepakati. Pengawas bangunan (building supervisors) harus mempunyai pemahaman yang baik tentang bagaimana mengawasi pelaksanaan bangunan.

TRAINING OBJECTIVE :
Tujuan training ini adalah memberikan pengetahuan dan pengalaman dalam kegiatan pengawasan proyek bangunan gedung. Peserta akan mendapatkan pengetahuan tentang bagaimana melakukan pengawasan proyek bangunan, memahami kontrak, spesifikasi, gambar kerja, penjadwalan, pengawasan mutu, dan koordinasi dengan unsur-unsur proyek.

TRAINING MATERIAL OUTLINE :
1.    Tugas Pengawas
2.    Mempersiapkan Pekerjaan
3.    Dokumen kontrak, Gambar Kerja, Shop Drawing dan As Built Drawing
4.    Pengendalian Waktu
5.    Pengendalian Biaya
6.    Mengawasi Mutu (Quality Assurance / Quality Control)
7.    Pekerjaan Tanah
8.    Pekerjaan Beton
9.    Project coordination/ communication

WHO SHOULD ATTEND THIS TRAINING ? :
a.    Wakil owner supaya dapat mengawasi pelaksanaan pekerjaan, baik yang dikerjakan secara swakelola maupun oleh kontraktor.
b.    Staf kontraktor
c.    Staf konsultan

TRAINING METHODE : Ceramah, diskusi, dan praktek.

INVESTATION PRICE/PERSON :   

  1. Rp. 5.950.000/person (full fare) or
  2. Rp. 5.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 5.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Toriq A. Ghuzdewan, S.T., MSCE adalah Sarjana Teknik Sipil dari Fakultas Teknik  UGM Yogyakarta dan lulusan  S2 Construction Management, University of Southern California  USA. Selain sebagai Dosen di Jurusan Teknik Sipil dan Lingkungan, FT UGM, Yogyakarta beliau juga mengepalai bidang diklat pada Lembaga Pengembangan Jasa Konstruksi Daerah Yogyakarta dan Asosiasi Keselamatan & Kesehatan Kerja Konstruksi Daerah  Istimewa Yogyakarta. Pengalaman beliau selain sebagai trainer untuk berbagai topik training di bidang konstruksi dan buiding maintenance, beliau juga sering terlibat sebagai Tim Teknis Perencanaan dan Pelaksanaan sejumlah gedung, juga sebagai Tenaga Ahli Manajemen Konstruksi, Estimator & CM Expert serta sebagai Tim Assessment dan Project Manager Pembangunan pada banyak proyek di DIY Yogyakarta dan Jawa Tengah.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Design Of Expriments (DOE) : Fundamental Concept And Application (BANDUNG)

Jadwal Training

Design Of Expriments (DOE) : Fundamental Concept And Application (BANDUNG) Tanggal 27 Aug 2018-30 Aug 2018 03 Sep 2018-06 Sep 2018 15 Oct 2018-18 Oct ... Baca Selengkapnya

Design Of Expriments (DOE) : Fundamental Concept And Application (BANDUNG)

Jadwal Training

Design Of Expriments (DOE) : Fundamental Concept And Application (BANDUNG)

Tanggal

  • 27 Aug 2018-30 Aug 2018
  • 03 Sep 2018-06 Sep 2018
  • 15 Oct 2018-18 Oct 2018
  • 05 Nov 2018-08 Nov 2018
  • 03 Dec 2018-06 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TUJUAN TRAINING:

  1. Tujuan utama training ini adalah memberikan pengetahuan tentang Konsep Dasar dari Eksperimental Desain, dengan menampilkan masalah numerik sederhana. Masalah diseleksi dari filosofi dasar desain.
  2. Tujuan lainnya adalah menampilkan langkah logic dalam desain yang sesuai dengan jalur yang konsisten, dan ditekankan untuk:
    • Setiap macam eksperimen
    • Pemisahan antar eksperimen
    • Desain
    • Analisis

CAKUPAN MATERI TRAINING:
Hari Pertama:
1.    Eksperiment, desain dan Analisis
•    Introduksi Desain Eksperiment
•    Eksperiment, desain dan analisis
2.    Review Statistik
•    Tes hipotesa
•    Kurva karakteristik operasi
•    Jumlah sampel
•    Aplikasi tes variansi
•    Aplikasi tes harga mean
3.    Eksperimen Faktor Tunggal, dg tidak ada batasan pada randomisasi
•    Analisis Variansi (ANOVA)
•    Analisis lanjutan setelah ANOVA
•    Batas kepercayaan harga mean
•    Komponen variansi
4.    Eksperimen Faktor Tungal – Randomized Block dan Desain Latin Square
•    Desain randomisasi lengkap
•    Data yang hilang
•    Latin Square
•    Interpretasi

Hari Kedua:
5.    Eksperimen Faktorial
•    Pendahuluan
•    Eksperimen Faktorial
•    Interpretasi
•    Satu pengamatan setiap treatment
6.    Model Fixed, Random dan Campuran (Mixed)
•    Pendahuluan
•    Model factor tunggal
•    Model dua factor
•    Aturan Expected Mean Square (EMS)
•    Penurunan
7.    Model Fixed, Random dan Campuran Lanjutan
•    Pseudo F-tes
•    Interpretasi
8.    Eksperimen Bersarang dan Eksperimen Bersarang Faktorial
•    Eksperimen Bersarang
•    Eksperimen Bersarang Faktorial
•    Desain pengukuran berulang dan eksperimen factorial bersarang

Hari Ketiga:
9.    Eksperimen dengan dua factor atau lebih – Batasan pada Randomisasi
•    Eksperimen factorial pada desain blok randomisasi
•    Eksperimen factorial pada desain Latin Square
10.    2f eksperimen Faktorial
•    Pendahuluan
•    Faktorial 22
•    Faktorial 23
•    Faktorial 2f
•    Interpretasi
11.    3f eksperimen Faktorial
•    Pendahuluan
•    Faktorial 32
•    Faktorial 33
•    Interpretasi
12.    Eksperimen Faktorial, desain Split – Plot
•    Pendahuluan
•    Desain Split -Plot

Hari Keempat:
13.    Eksperimen Faktorial – Terkemas (Confounding) dalam Blok
•    Pendahuluan
•    Sistem kemasan
•    Kemasan Blok – tanpa pengulangan
•    Kemasan blok – dengan pengulangan
14.    Replikasi Fraksional
•    Pendahuluan
•    Aliases
•    2f replikasi fraksional
•    Resolusi desain
•    3f replikasi fraksional
•    Desain Plackett – Burman
15.    Pendekatan Taguchi pada desain eksperimen
•    Pendahuluan
•    L4(23)
•    L8(27)
•    L16(215)
•    L9(34)
•    Desain Taguchi lainnya
16.    Regresi
•    Pendahuluan
•    Regresi Linier
•    Regresi kurvilinier
•    Polinomial Orthogonal
17.     Practive using Minitab

DURASI TRAINING :  4  hari

HARGA INVESTASI/PESERTA : 

  1. Rp 8.500.000/person (full fare)  or
  2. Rp 8.250.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Dr. Ir. Farida Idealistina Muchtadi,MT. adalah seorang associate professor di Institut Teknologi Bandung, ITB. Beliau mengajar di jurusan teknik fisika (TF) ITB, dan juga mengajar di program magister (S2) di program instrumentasi dan kontrol(PINK) ITB. Ibu Dr. Farida I Muchtadi sudah berpengalaman dalam memberikan pelatihan/training kepada perusahaan-perusahaan di Indonesia. Di Kampus ITB, Beliau mengajar untuk beberapa mata kuliah seperti design of experiments(DOE), metode dan sistem pengukuran, sistem instrumentasi, instrumentasi medik, laboratorium teknik fisika serta tugas khusus. Dengan perjalanan waktu yang panjang sebagai dosen dan pengalaman yang baik Ibu Dr. Farida I Muchtadi siap membagikan dan mendiskusikan ilmu dan pengalamannya di kelas-kelas training Beliau.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Sistem Hidrolik dan Pneumatik (BANDUNG)

Jadwal Training

Sistem Hidrolik dan Pneumatik (BANDUNG) Tanggal 18 Sep 2018-21 Sep 2018 08 Oct 2018-11 Oct 2018 20 Nov 2018-23 Nov 2018 03 Dec 2018-06 Dec ... Baca Selengkapnya

Sistem Hidrolik dan Pneumatik (BANDUNG)

Jadwal Training

Sistem Hidrolik dan Pneumatik (BANDUNG)

Tanggal

  • 18 Sep 2018-21 Sep 2018
  • 08 Oct 2018-11 Oct 2018
  • 20 Nov 2018-23 Nov 2018
  • 03 Dec 2018-06 Dec 2018

Pukul
09.00-16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TUJUAN/SASARAN PELATIHAN

  1. Memberikan pengertian dasar tentang mekanika fluida yang berkaitan dengan sistem hidrolik dan pneumatik.
  2. Memberikan pengetahuan tentang penerapan sistem hidrolik dan pneumatik di industri.
  3. Memberikan pengetahuan tentang dasar-dasar perancangan sistem hidrolik dan pneumatik.
  4. Memberikan pengetahuan tentang pengoperasian dan pemeliharaan sistem hidrolik dan pneumatik.

CAKUPAN MATERI TRAINING :
1. Pendahuluan

  • Komponen penyusun sistem hidrolik dan pneumatik
  • Aplikasis sistem hidrolik dan pneumatik di industri
  • Kelebihan dan kekurangan sistem hidrolik dan pneumatik

2. Teori Dasar Mekanika Fluida

  • Pengertian Fluida
  • Sifat-sifat Fluida
  • Tekanan dan Head
  • Hukum Pascal
  • Aliran Fluida
  • Persamaan Bernoulli
  • Kerugian Gesekan Aliran
  • Pengukuran Aliran dan Tekanan.

3. Sistem Hidrolik

  • Rangkaian dan Simbol Komponen Sistem Hidrolik
  • Fluida Kerja
  • Pompa
  • Aktuator
  • Katup Pengendali
  • Perlengkapan Pendukung
  • Contoh-contoh Rangkaian Sistem Hidrolik

4. Sistem Pneumatik

  • Rangkaian dan Simbol Komponen Sistem Pneumatik
  • Kompresor
  • Aktuator
  • Katup Pengendali
  • Perlengkapan Pendukung
  • Contoh-contoh Rangkaian Sistem Pneumatik

INVESTATION PRICE/PERSON :

  1. Rp 8.500.000/person (full fare)  or
  2. Rp 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Bag
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. I Nengah Diasta, M.Eng. is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc. Ir. I Nengah Diasta, M.Eng. has much experiences in real practical work in project implementation and has collaborated with many institution and companies.

Ir. I Nengah Diasta, M.Eng. has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc. Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX, Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Compressor : Operation, Maintenance & Troubleshooting (BANDUNG)

Jadwal Training

Gas Compressor : Operation, Maintenance & Troubleshooting (BANDUNG) Tanggal 17 Sep 2018-20 Sep 2018 15 Oct 2018-18 Oct 2018 19 Nov 2018-22 Nov 2018 17 ... Baca Selengkapnya

Gas Compressor : Operation, Maintenance & Troubleshooting (BANDUNG)

Jadwal Training

Gas Compressor : Operation, Maintenance & Troubleshooting (BANDUNG)

Tanggal

  • 17 Sep 2018-20 Sep 2018
  • 15 Oct 2018-18 Oct 2018
  • 19 Nov 2018-22 Nov 2018
  • 17 Dec 2018-20 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVE :
After completion of the course, the participants should be able to describe and demonstrate thoroughly of gas-compressors. Identify component by names, operation, maintenance and inspection. Describe the proper care, removal alignment and installation of gas-compressors and their accessories.

WHO SHOULD ATTEND?
Gas-compressor operator, supervisor, and to whom may concern in gas-compressor operation and maintenance.

TRAINING MATERIAL OUTLINE :

  1. Fundamental of fluid mechanics and thermodynamic
    • Properties of fluids
    • Measurement unit
    • Basic of fluids dynamic
    • Energy losses in pipe installation
    • The gas Laws
    • Specific Heat
    • Compression process
      • Isothermal
      • Adiabatic
      • Polytrophic
    • Compression Work
    • Multistage compression
  2. Pressure loss at gas pipe installation
    • Definition and accuracy
    • Factors to estimate friction loss
    • Pressure gradient in pipe
      • General equation of various gas
      • Natural gas piping equation
      • Vacuum piping equation
      • Fitting pressure loss
      • Flexible pipe pressure loss
  3. Fundamental theory of compressor
    • Compressor development history
    • Compressor classification
    • Compressor work cycle
      • Theoretic cycle
      • Semi theoretic cycle
      • Actual cycle
    • Centrifugal compressor
    • Head, losses and efficiency
    • Characteristic at each speed
  4. Dynamic Compressor
    • Performance & condition definition
    • Type of centrifugal compressor
      • High casing
      • Horizontal split casing
      • Vertical split casing
    • Package assembly
    • Multi casing unit
    • Centrifugal compressor application
    • Characteristic of centrifugal compressor
    • General detail of centrifugal compressor
      • Impeller
      • Diaphragm
      • Inter stage packing
      • Rotor assembly
      • Casing
      • Journal and thrust bearing
      • Shaft seals
      • Seal and lubrication system
      • Gas cooling
    • Pressure ratio and centrifugal characteristic curve
    • Control of capacity
      • Load curve
      • Control method
      • Surge control
      • Parallel operation
      • Unloading start
    • Inner gear air centrifugal compressor
      • Modulation pressure control
      • Dual step capacity control
      • Auto dual control
    • Axial flow compressor
  5. Positive Compressor
    • Application of theory
      • Reciprocating compressor
      • Clearance control
      • Clearance control and variable compression ratio
      • Effect of heat specific ratio to horse power
      • Peak horse power and break horse power
      • Effect of compressibility
      • Effect of altitude
    • Reciprocating compressor
      • Definition
      • Characteristic
      • Classification
      • Cylinder
      • Valve
      • Cylinder cooling
      • Non-cooled cylinder
      • Air cooling cylinder
      • Capacity control
      • Manual control
      • Main automatic control
      • Load depletion to start
      • Types of control
      • Constant speed control
      • Suction side throttling
      • Variable speed control
  6. Installation, operation and maintenance
    • Installation
      • Placement
      • Suction condition
      • Foundation
      • Piping
      • Electric cabling
    • Field testing
      • Commissioning
      • Running test
    • Operation
      • Responsibility
      • Recording
      • Cleaning
      • Lubrication
      • Safety
      • Initial start
      • Capacity control
      • Spare parts
      • Trouble shooting
    • Inspection and maintenance
      • Preventive maintenance
      • Predictive maintenance

INVESTATION PRICE/PERSON :

  1. Rp 8.500.000/person (full fare)  or
  2. Rp 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. I Nengah Diasta, M.Eng. is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc.

Ir. I Nengah Diasta, M.Eng. has much experiences in real practical work in project implementation and has collaborated with many institution and companies.

Ir. I Nengah Diasta, M.Eng. has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc. Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX, Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Rekayasa Hidrolik And Aplikasi (BANDUNG)

Jadwal Training

Rekayasa Hidrolik And Aplikasi (BANDUNG) Tanggal 24 Sep 2018-27 Sep 2018 09 Oct 2018-12 Oct 2018 26 Nov 2018-29 Nov 2018 04 Dec 2018-07 Dec ... Baca Selengkapnya

Rekayasa Hidrolik And Aplikasi (BANDUNG)

Jadwal Training

Rekayasa Hidrolik And Aplikasi (BANDUNG)

Tanggal

  • 24 Sep 2018-27 Sep 2018
  • 09 Oct 2018-12 Oct 2018
  • 26 Nov 2018-29 Nov 2018
  • 04 Dec 2018-07 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TUJUAN TRAINING :
Memberikan suatu wawasan industri yang berkenaan dengan rekayasa hidrolik berupa prinsip-prinsip hidrolik, rancangan peralatan dan berbagai rangkain serta aplikasinya

CAKUPAN MATERI TRAINING :

  1. Prinsip-prinsip fisika, simbol dan standar ISO
  2. Rancangan, fungsi dan data karakteristik dari pompa, katup aliran, katup tekanan, katup arah (directional control valve)
  3. Kurva karakterstik pompa
  4. Pengukuran waktu dan tekanan silinder
  5. Metode perhitungan untuk gaya, kecepatan dan keluaran (debit)
  6. Rangkaian dasar mempergunakan silinder kerja tunggal dan kerja ganda
  7. Simulasi parameter rancangan dalam rekayasa hidrolik
  8. Praktek laboratorium
  9. Diskusi

HARGA INVESTASI/PESERTA :    

  1. Rp 7.950.000/peserta (bayar penuh)  atau
  2. Rp 7.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp 7.500.000/peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified 
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Aris Suryadi, MT  adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti  Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Rekayasa Elektro Hidrolik And Aplikasi (BANDUNG)

Jadwal Training

Rekayasa Elektro Hidrolik And Aplikasi (BANDUNG) Tanggal 27 Aug 2018-30 Aug 2018 17 Sep 2018-20 Sep 2018 02 Oct 2018-05 Oct 2018 19 Nov 2018-22 ... Baca Selengkapnya

Rekayasa Elektro Hidrolik And Aplikasi (BANDUNG)

Jadwal Training

Rekayasa Elektro Hidrolik And Aplikasi (BANDUNG)

Tanggal

  • 27 Aug 2018-30 Aug 2018
  • 17 Sep 2018-20 Sep 2018
  • 02 Oct 2018-05 Oct 2018
  • 19 Nov 2018-22 Nov 2018
  • 17 Dec 2018-20 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TUJUAN TRAINING :
Memberikan suatu wawasan industri yang berkenaan dengan rekayasa elektro hidrolik beserta penerapannya di industri.

CAKUPAN MATERI TRAINING :

  1. Prinsip dasar elektro hidrolik : keuntungan dan aplikasi elektro hidrolik disain sistem elektro hidrolik
  2. Simbol komponen dan gambar rangkain, penyediaan dan pengalihan (transfer) energi
  3. Pengontrolan gerakan silinder
  4. Kontrol elektro hidrolik gerakan berurutan (sequential)
  5. Praktek laboratorium
  6. Diskusi

HARGA INVESTASI/PESERTA :

  1. Rp 7.950.000/peserta (bayar penuh)  atau
  2. Rp 7.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp 7.500.000/peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. Aris Suryadi, MT adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Hydraulic Components : Conductors, Conditioners, And Fluids (JAKARTA + LUAR KOTA)

Jadwal Training

Hydraulic Components : Conductors, Conditioners, And Fluids (JAKARTA + LUAR KOTA) Sistem hidrolik tersusun dari komponen hidrolik didalamnya, sehingga diperlukan komponen fungsional yang baik untuk ... Baca Selengkapnya

Hydraulic Components : Conductors, Conditioners, And Fluids (JAKARTA + LUAR KOTA)

Jadwal Training

Hydraulic Components : Conductors, Conditioners, And Fluids (JAKARTA + LUAR KOTA)

Sistem hidrolik tersusun dari komponen hidrolik didalamnya, sehingga diperlukan komponen fungsional yang baik untuk membentuk suatu sistem hidrolik yang memiliki mutu / kualitas yang baik. Oleh karena itu desain dan pemilihan komponen hidrolik merupakan hal terpenting dari teknologi hidrolik.
Pelatihan ini didesain untuk memberikan pemahaman komprehensif terkait dengan sistem operasional dan desain serta deskripsi analitis komponen hidrolik. Sehingga diharapkan mampu tercapainya desain terkomputerisasi dan pemilihan komponen hidrolik yang efektif.
MATERI / OUTLINE PELATIHAN
  1. Reservoirs dan Komponen Sistemnya
  2. Jenis / Tipe Reservoirs
  3. Reservoir Volume; Components; Interior Care and Auxiliary Tanks
  4. Reservoir in Use
  5. Tahapan dan Teknik / Strategi Pemeliharaan dan Pemilihan / Seleksi Reservoir
  6. Conductors, Fittings, and Seals; Maintenance Tips for Conductors, Fittings, and Seals
  7. Choice of Conductor Size and Materials
  8. Types of Heat Exchangers; Automatic Temperature Control
  9. Effective System Cooling Tips
  10. Accumulators
  11. Circuits Using Accumulators
  12. Accumulator Safety; Hydraulic Fluids
  13. Petroleum-based Fluids; Viscosity; Demulsibility
  14. Oxidation Stability; Lubricating Value
  15. Corrosion and Rust Prevention
  16. Fire-resistant Fluids
  17. Studi kasus dan diskusi

INSTRUCTURE / FASILITATOR
Ir. Y. Agus Jayatun, MT.,IPP and Tim

Ketentuan lain Penyelenggaraan Pelatihan :
Pelatihan dapat diselenggarakan setiap harinya diluar jadwal diatas, apabila peserta / instansi terkait berencana mengirimkan peserta sesuai dengan minimal kuota.

JADWAL DAN INVESTASI PELATIHAN
Yogyakarta / Cavinton Hotel | Rp6.300.000/peserta
Semarang / Ibis Simpang Lima Hotel | Rp5.900.000/peserta
Malang / Ibis Malang Hotel | Rp5.900.000/peserta
Solo / Ibis Solo Hotel | Rp5.900.000/peserta
Jakarta / Ibis Kemayoran Hotel | Rp7.000.000/peserta
Surabaya / Santika Hotel | Rp7.000.000/peserta
Bandung / Serella Hotel | Rp7.000.000/peserta
Bali / Santika Hotel | Rp8.100.000/peserta
Batam / Nagoya Plaza Hotel | Rp8.100.000/peserta
Balikpapan / Ibis Hoel | Rp8.100.000/peserta
(biaya tersebut belum termasuk penginapan)

Alternative Tanggal :
Agustus  14-16 | 29-31
September 5-7 | 12-14 | 19-21 | 26-28
Oktober 3-5 | 10-12 | 17-19 | 24-26 | 28-30
November 7-9 | 14-16 | 21-23 | 28-30
Desember 5-7 | 12-14 | 19-21 | 26-28

(peserta dapat memilih tanggal & lokasi alternatif diatas sesuai dengan yang diperlukan | apabila dari alternatif tanggal yang diberikan tidak sesuai, peserta dapat me-request tanggal sesuai dengan yang diperlukan)

Fasilitas Pelatihan

  1. Sertifikat Pelatihan (Certificate)
  2. Expert Instructure
  3. Meeting Room Hotel dengan Lunch dan 2 kali Coffe Break
  4. Exclusive Training kits dan Backpacks
  5. Modul Pelatihan Hard dan Softcopy
  6. USB Flashdisk
  7. Foto Group Soft & Hard Copy
  8. Souvenir
  9. Transportasi selama Pelatihan (bandara dan Penginapan Ke Lokasi Pelatihan).

METODE PELATIHAN

  • Presentasi
  • Diskusi  dan Tanya Jawab
  • Studi kasus
  • Brainstorming
  • Praktek

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing
Certified Human Resources

Alignment, Levelling And Rotor Balancing (BANDUNG)

Jadwal Training

Alignment, Levelling And Rotor Balancing (BANDUNG) Tanggal 13 Aug 2018-15 Aug 2018 17 Sep 2018-19 Sep 2018 29 Oct 2018-31 Oct 2018 19 Nov 2018-21 ... Baca Selengkapnya

Alignment, Levelling And Rotor Balancing (BANDUNG)

Jadwal Training

Certified Human Resources
Certified Human Resources

Alignment, Levelling And Rotor Balancing (BANDUNG)

Tanggal
13 Aug 2018-15 Aug 2018
17 Sep 2018-19 Sep 2018
29 Oct 2018-31 Oct 2018
19 Nov 2018-21 Nov 2018
17 Dec 2018-19 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION
3  days

LATAR BELAKANG:
Getaran berlebihan pada mesin dapat disebabkan oleh mislignment, mislevelling dan unbalance yang dapat mengakibatkan life time dari mesin rendah. Setiap mesin yang diinstalasi atau dirakit tidak diperbolehkan melebihi standar misalignment, mislevelling, dan unbalance. Semakin tinggi putaran mesin yang digunakan maka harus semakin teliti dalam melakukan leveling, alignment, dan balancing. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Alignment, Levelling, and Rotor Balancing.

SASARAN PESERTA TRAINING:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang disain dan perawatan mesin pada industri manufaktur dan industri minyak.

OUPUT TRAINING:
1.    Pemahaman tentang pengetahuan balancing, levelling, dan alignment.
2.    Keahlian dalam melakukan alignment, levelling, dan balancing secara manual dan menggunakan laser.

CAKUPAN MATERI TRAINING:
1.    Balancing
•    Prinsip dan jenis balancing
•    Balancing statik dan dinamik
•    Balancing roda gerinda
•    Balancing rotor dan kopel poros

2.    Teknik levelling

3.    Alignment
•    Akibat, jenis, dan standar misalignment
•    Teknik alignment poros
•    Alignment poros dengan pisau rata, dial indicator, dan laser

INSTRUCTOR :   Parno Rahardjo, M.Sc.  dan Tim

INVESTATION PRICE/PERSON :     

  • Rp 5.950.000/peserta (bayar penuh)  atau
  • Rp 5.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp 5.500.000/peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing
Industrial Robotic Training

Industrial Robotics : Sensing, Planning, and Control (BANDUNG)

Jadwal Training

Industrial Robotics : Sensing, Planning, and Control (BANDUNG) Tanggal 24 Sep 2018-27 Sep 2018 08 Oct 2018-11 Oct 2018 26 Nov 2018-29 Nov 2018 10 ... Baca Selengkapnya

Industrial Robotics : Sensing, Planning, and Control (BANDUNG)

Jadwal Training

Industrial Robotic Training

Industrial Robotics : Sensing, Planning, and Control (BANDUNG)

Tanggal

  • 24 Sep 2018-27 Sep 2018
  • 08 Oct 2018-11 Oct 2018
  • 26 Nov 2018-29 Nov 2018
  • 10 Dec 2018-13 Dec 2018

TEMPAT TRAINING
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INTRODUCTION:
The industrial robotics training program introduces the basic mechanisms of industrial robots and provides the use of industrial robots for automating a manufacturing processes. The course focuses on mechanical constructions, kinematics, dynamics, coordinates systems of robots, sensors, path planning, and controls, as well as the programming of industrial robots using robot simulation software, Robologix, that provides access to a range of industrial robots including Cartesian, SCARA designs and includes various end effectors.  The participants obtain practical programming of an industrial robot through a combination of teach-pendant programming and 3D animations of the robot arm movement.

TRAINING OBJECTIVES:
After completing this course, the participants will be able to classify different robot mechanisms, to understand kinematics, dynamics, and coordinates of industrial robots, to comprehend the concepts of sensory systems, planning, and controls used in industrial robots, and to program industrial robots using the state-of-the-art robotics simulation.

TRAINING MATERIAL OUTLINES:
1.    Introduction to Robotics
a.    Robot Classifications
b.    Robot Mechanical Structure: Manipulators and Mobile Robots
c.    Industrial Robotics

2.    Actuators and Sensors
a.    Joint Actuating System
b.    Drives
c.    Sensors

3.    Motion Control of Industrial Robots
a.    Coordinates Systems
b.    Kinematics, Dynamics, and Motor Control
c.    Path and trajectory planning

4.    Industrial Robot Simulation
a.    Introduction to RoboLogix
b.    Programming RoboLogix
c.    3D Animations

WHO SHOULD ATTEND THIS TRAINING?:
Engineers and technicians who are involved in the design, operation, maintenance, and procurement of industrial robotics systems.

TRAINING METHOD AND TOOLS
a.    Presentation
b.    Robologix
c.    Matlab

INVESTATION PRICE/PERSON :    

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Augie Widyotriatmo received his B. Eng. and M. Eng. degrees in engineering physics from the Bandung Institute of Technology(ITB), Indonesia, and recieved his Ph.D. degree in mechanical engineering from Pusan National University, Korea. He joined the Instrumentation and Research Group, Faculty of Industrial Technology, as an assistant professor at Bandung Institute of Technology (ITB), Indonesia. His current research include robotics, nonholonomic systems, robust and nonlinear control, visual servoing, and multi-robots systems. He has published his works in national and international journals and conference proceedings. He is a member of IEEE Robotics and Automation Society and of IEEE Control Systems Society.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Maintenance Of Machine Tools (BANDUNG)

Jadwal Training

Maintenance Of Machine Tools (BANDUNG) Tanggal 03 Sep 2018-06 Sep 2018 08 Oct 2018-11 Oct 2018 05 Nov 2018-08 Nov 2018 03 Dec 2018-06 Dec ... Baca Selengkapnya

Maintenance Of Machine Tools (BANDUNG)

Jadwal Training

Maintenance Of Machine Tools (BANDUNG)

Tanggal
03 Sep 2018-06 Sep 2018
08 Oct 2018-11 Oct 2018
05 Nov 2018-08 Nov 2018
03 Dec 2018-06 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4  days

LATAR BELAKANG:
Setelah mesin dipakai dalam selang waktu tertentu maka keausan yang terjadi karena beberapa faktor  menyebabkan kerusakan komponen-komponen pada mesin perkakas. Misal, deformasi karena gaya pemotongan dapat menimbulkan gejala gerakan yang tersendat-sendat (stick-slip) pada gerakan pindah berbagai komponen, menimbulkan keadaan getaran paksa dan kesalahan dinamik pada konstruksi mesin perkakas. Bagi perawat mesin perkakas yang tidak tanggap dan tidak ahli, kerusakan yang kecil pun bisa menjadi sumber frustasi dan mungkin pula dapat menambah parahnya kerusakan. Oleh sebab itu, diperlukan tim perawat yang ahli. Tim perawat bisa terlibat pula sewaktu diadakan instalasi mesin baru, tes penerimaan mesin, perawatan preventif dan rekalibrasi mesin perkakas. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Perawatan dan Perbaikan Mesin Perkakas (Maintenance of Machine Tools).

SASARAN PESERTA TRAINING:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perawatan mesin pada industri rekayasa.

OUPUT TRAINING:
Keahlian tentang penanganan terhadap kerusakan komponen-komponen, uji kelaikan, dan evaluasi hasil rekondisi mesin perkakas.

CAKUPAN MATERI TRAINING:
1.    Strategi perawatan
2.    Langkah-langkah perawatan mesin perkakas
3.    Perawatan dan perbaikan komponen mesin perkakas
4.    Tes jalan (running test) mesin perkakas
5.    Perawatan preventif mesin perkakas
6.    Rekalibrasi mesin perkakas

INSTRUCTOR :   Parno Rahardjo, M.Sc.  dan Tim

INVESTATION PRICE/PERSON :   

  • Rp 7.950.000/peserta (bayar penuh)  atau
  • Rp 7.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp 7.500.000/peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Performance Analisys And Maintenance Of Electrical Distribution Networks For Supervisor (BANDUNG)

Jadwal Training

Performance Analisys And Maintenance Of Electrical Distribution Networks For Supervisor (BANDUNG) Tanggal 10 Sep 2018-13 Sep 2018 08 Oct 2018-11 Oct 2018 12 Nov 2018-15 ... Baca Selengkapnya

Performance Analisys And Maintenance Of Electrical Distribution Networks For Supervisor (BANDUNG)

Jadwal Training

Performance Analisys And Maintenance Of Electrical Distribution Networks For Supervisor (BANDUNG)

Tanggal

  • 10 Sep 2018-13 Sep 2018
  • 08 Oct 2018-11 Oct 2018
  • 12 Nov 2018-15 Nov 2018
  • 10 Dec 2018-13 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION:
This training will be presented for the supervisors or those who handle of electrical distribution networks in industries or mining. Therefore, the reliability of performance for the distribution network will ensure a secure energy supply lasted for 24 hours per day. So the condition of the performance of the distribution network must be analyzed and maintained with routine and programmed. During the training, presentation of the materials will be presented in a comprehensive manner, through the method of presentation of these things easily lead to a more complex, and practically based to a critical analysis.

TRAINING OBJECTIVES:
After completing this training, at the end of the activities you will be able to explain clearly about the analysis, performance, maintenance of the electrical distribution networks in the industry.

TRAINING MATERIAL OUTLINE:

  1. Overview for supplying of the electrical energy in the process of production activities in industries
  2. Performance analysis of Network circuit
  3. Performance analysis of transformer distribution
  4. Testing and setting of protection devices
  5. Inspection of network installation condition
  6. Preventive maintenance for termination
  7. Performance and preventive maintenance of switchboards

TRAINING METHOD:

  1. Question – answer
  2. Discussion
  3. Adult education
  4. Presentation is associated with the experience of participants

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat or T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Brayan Munthe was born in May 26th 1954. He got his education from electrical engineering IKIP Padang, then diploma of technical teacher training Hawthorn Institute of Education, Melbourne, and his master program from electrical engineering universitas gadjah mada, UGM Yogyakarta. He has followed many courses in Indonesia and also abroad to improve his capabilities. He is lecturer at politeknik TEDC and also at electrical department technical education development center Bandung. He has field experiences because he has done some projects in some companies in Indonesia related to his competencies.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Welding Inspection (BANDUNG)

Jadwal Training

Welding  Inspection (BANDUNG)  Tanggal 11 Sep 2018-14 Sep 2018 15 Oct 2018-18 Oct 2018 13 Nov 2018-16 Nov 2018 10 Dec 2018-13 Dec 2018 Tempat ... Baca Selengkapnya

Welding Inspection (BANDUNG)

Jadwal Training

Welding  Inspection (BANDUNG) 

Tanggal

  • 11 Sep 2018-14 Sep 2018
  • 15 Oct 2018-18 Oct 2018
  • 13 Nov 2018-16 Nov 2018
  • 10 Dec 2018-13 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Investasi

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

TUJUAN TRAINING
Agar peserta memahami istilah-ilstilah dalam pengelasan, jenis-jenis las, praktek las, memahami jenis-jenis cacat las dan penanggulangannya serta metoda inspeksi.

CAKUPAN MATERI TRAINING:

  1.  Las Dalam Kehidupan Sehari-hari
    • Rumah tangga
    • Lingkungan
    • Industri
  2. Ilmu Logam Tingkat Dasar
    • Klasifikasi bahan teknik
    • Logam dan paduannya
    • Sifat-sifat logam
    • Pengujian merusak dan tampa merusak
  3. Ilmu Logam Tingkat Lanjut
    • Proses solidifikasi
    • Rekristalisasi
    • Pemaduan logam
    • Diagram fasa
    • metalografi dan struktor mikro
    • Heat treatment
  4. Inspeksi Las
    • Klasifikasi las
    • Lingkup kerja
    • Cacat dan penanggulangannya
    • Problem solving cacat las dengan ultrasonik
  5. Praktek pengelasan dan inspeks
    • Las SMAW
    • Las Asetilen
    • Las GTAW
    • Las resistance welding

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?
Engineer & Operator serta semua pihak yang ingin memahami topik ini.

INSTRUCTOR
Ir. SYAHBARDIA, MT. alumni dari teknik mesin Institut teknologi Bandung, ITB (sarjana), dan teknik material ITB untuk program magister. Beliau pernah menjadi dosen di Politeknik ITB/POLBAN dan sekarang Beliau menjadi dosen di jurusan teknik di universitas Pasundan, Bandung. Beliau memiliki pengalaman lapangan praktis sebagai mechanical engineer ketika beliau bekerja, seperti di IPTN, PINDAD, dan PAL. Ir. Syahbardia,MT. sudah sering menjadi instruktur di training-training industri untuk perusahaan-perusahaan di Indonesia. Diantara judul-judul yang Beliau sampaikan adalah Predictive and Preventive Pump Maintenance, Compressor Characteristic Maintenance & Troubleshooting, Rotary Equipment Maintenance, Lubrication, Operation, Maintenance and Trouble Shooting, Materials Selection and Knowledge for Engineers, Centrifugal Compresor & Steam Turbine Performance, Welding Inspection, Turbine & Generator Operation, Boiler Water Treatment, Pump Operation and Maintenance, Electrical Motor Control System, Corrosion and Cathodic Protection, Fluid Flow Measurement, Generator Preventive Maintenance, Heavy Equipment Management, Preventive and Predictive Maintenance, dan lain-lain.

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Practical Process Control (BANDUNG)

Jadwal Training

Practical Process Control (BANDUNG) TRAINING TIME : 27 Aug 2018-30 Aug 2018 17 Sep 2018-20 Sep 2018 15 Oct 2018-18 Oct 2018 19 Nov 2018-22 ... Baca Selengkapnya

Practical Process Control (BANDUNG)

Jadwal Training

Practical Process Control (BANDUNG)

TRAINING TIME :

  • 27 Aug 2018-30 Aug 2018
  • 17 Sep 2018-20 Sep 2018
  • 15 Oct 2018-18 Oct 2018
  • 19 Nov 2018-22 Nov 2018
  • 04 Dec 2018-07 Dec 2018

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

TRAINING INTRODUCTION:
This training provides a guide for engineers, managers, technicians, and others that are new to process control or experienced control engineers who are unfamiliar with multi-loop control techniques. After the traditional single-loop and multi-loop techniques that are most often used in industry are covered, a brief introduction to advanced control techniques is provided. Whether the participant is working as a process control engineer, working in a control group, or working in an instrument department, the information will set the solid foundation needed to understand and work with existing control systems such as Distributed Control System (DCS) or to design new control applications.

TRAINING OBJECTIVE:
After completing this course, participants will be able to:

  1. Address the concepts and terminology that are needed to work in the field of process control
  2. Implement multi-loop control strategies in the real plant application
  3. Identify process dynamics and gain
  4. Experience the plant operation and control strategy implementation on Distributed Control System (DCS)
  5. Specify the control requirements for more complex process plant (continuous and batch processes)
  6. Understand the operation and tuning basic PID controller (manual Tuning & Self Tuning)
  7. Design and tune the multi-loop controllers

TRAINING MATERIAL OUTLINE:

  • Measurement and Final Control Element (Sensors and control valves)
  • Field Wiring and Communications (Traditional, HART, FF , Wireless HART)
  • Control Strategy Documentation (Plot Plan, Flow Sheet, P&ID, Loop Diagram)
  • Operator Graphics and Metrics (Human Machine Interface Design)
  • Process Characterization (Identifying process dynamics and gain)
  • Single Loop Control (PID basics, selecting PID structure, action)
  • Tuning and Loop Performance (Manual and Automated tuning)
  • Multi Loop Control (Feedforward, Cascade, Override, Split-range)
  • Model Predictive Control (Addressing Difficult Dynamics, Interactions)
  • Process Modeling (Identification and Process Simulation)
  • Applications: Selected Industrial Case Studies or User on Demand Case

TRAINING METHODES :

  1. Tutorial/Class
  2. Software Simulation and Demo
  3. Workshop/Practices
  4. Interactive Discussions

CLASS/EXERCISES:
Available case studies:

  • Mixing Process & Heat Exchanger
  • Three Element Drum Level Control
  • Batch Chemical Reactor
  • Power Boiler Combustion Control
  • Distillation Column Control
  • Ammonia Plant H/N Control

INSTRUCTOR :   Dr. Ade Haryanto, Ph.D. and Team

INVESTATION PRICE/ PERSON :

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Dr. Ade Haryanto, Ph.D. received the B.S. in Engineering Physics and M.S. degree in Instrumentation and Control from Bandung Institute of Technology (ITB) in 2003 and 2006, respectively, and Doctor Degree (Dr.) and Doctor of Philosophy (Ph.D) in Intelligent Control and Automation in 2010 and 2013, respectively, from School of Mechanical Engineering, Pusan National University, Busan, South Korea. His research focus is including modeling, identification, dynamics system, instrumentation and control of the power plant and its implementation using distributed control system. As a professional instructor, he has trained various topics in the scope of process control, automation, and metering systems, which were aimed to participants coming from industrial practitioners such as PT. Pupuk Kaltim, PT. Badak NGL, PT. Pertamina, PT. Indonesia Power, PT PLN, PT. Pupuk Iskandar Muda, etc. In the project implementation areas, the instructor also experience in project documentation, control system migration and power plant design.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Maintenance Management System For Supervisor (BANDUNG)

Jadwal Training

Maintenance Management System For Supervisor  (BANDUNG) Tanggal 27 Aug 2018-30 Aug 2018 24 Sep 2018-27 Sep 2018 29 Oct 2018-01 Nov 2018 26 Nov 2018-29 ... Baca Selengkapnya

Maintenance Management System For Supervisor (BANDUNG)

Jadwal Training

Maintenance Management System For Supervisor  (BANDUNG)

Tanggal

  • 27 Aug 2018-30 Aug 2018
  • 24 Sep 2018-27 Sep 2018
  • 29 Oct 2018-01 Nov 2018
  • 26 Nov 2018-29 Nov 2018
  • 17 Dec 2018-20 Dec 2018

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION:
This training will be presented for the supervisor or engineer  or those who handle of engaged in managing the maintenance of production machinery, utilities, and users of production machinery. All of company facilities (items), such as production machinery, utilities, buildings, etc. should be in standard condition. Standard condition of items could be maintained through programmed maintenance. Therefore,  in order the exercise of the maintenance activities can be well done, should be managed for the maintenance of these items. The success of the maintenance activities will support the increase in production, working comfort, and enhance the prestige of the company.

During the training, presentation of the materials will be presented in a comprehensive manner, through the method of presentation of these things easily lead to a more complex, and practically based to a critical analysis.

TRAINING OBJECTIVES:
After completing this training, at the end of the activities you will be able to explain clearly about the analysis, performance, operation of the electrical generator in the industry.

TRAINING MATERIAL OUTLINE:

  1. Maintenance system
  2. Unprogrammed maintenance
  3. Preventive (programmed) maintenance
  4. Down time
  5. Manual of maintenance for facilities or machines
  6. Maintenance activity scheduling
  7. Friction and tribologie
  8. Lubrication
  9. Inventory of spare parts

TRAINING METHOD:

  1. Question – answer
  2. Discussion
  3. Adult education.
  4. Presentation is associated with the experience of participants

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Brayan Munthe was born in May 26th 1954. He got his education from electrical engineering IKIP Padang, then diploma of technical teacher training Hawthorn Institute of Education, Melbourne, and his master program from electrical engineering universitas gadjah mada, UGM Yogyakarta. He has followed many courses in Indonesia and also abroad to improve his capabilities. He is lecturer at politeknik TEDC and also at electrical department technical education development center Bandung. He has field experiences because he has done some projects in some companies in Indonesia related to his competencies

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Manajemen Material (BANDUNG)

Jadwal Training

Manajemen Material (BANDUNG) Tanggal 24 Sep 2018-27 Sep 2018 15 Oct 2018-18 Oct 2018 26 Nov 2018-29 Nov 2018 03 Dec 2018-06 Dec 2018 TEMPAT ... Baca Selengkapnya

Manajemen Material (BANDUNG)

Jadwal Training

Manajemen Material (BANDUNG)

Tanggal
24 Sep 2018-27 Sep 2018
15 Oct 2018-18 Oct 2018
26 Nov 2018-29 Nov 2018
03 Dec 2018-06 Dec 2018

TEMPAT TRAINING
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

PENDAHULUAN :
Sebagaimana diketahui bahwa perusahaan dituntut untuk selalu memperbaiki manajemen disetiap bagian agar senantiasa mampu menjawab tantangan. Dan ketika perusahaan makin berkembang, maka persoalan material makin kompleks pula sehingga dicari jalan keluar yang terbaik, dalam hal inilah manajemen material mulai menjadi penting karena material merupakan komponen dari ongkos produksi.

TUJUAN PELATIHAN :
Pelatihan ini  dirancang untuk memberikan pengetahuan tentang dasar-dasar manajemen material secara umum.

SASARAN :
Setelah mengikuti pelatihan ini peserta diharapkan mampu mengetahui dan memahami berbagai informasi dan data dapat dimanfaatkan untuk melakukan perencanaan dan pengendalian material
Peserta juga diharapkan mampu melakukan pengelolaan material secara benar

TARGET PESERTA :
Peserta adalah pelaku yang terkait dengan perencanaan dan pengendalian persediaan material

CAKUPAN MATERI TRAINING :
1.    Manajemen Material
a.    Pengertian Manajemen Material
b.    Tujuan
c.    Fungsi
d.    Penerimaan
e.    Penyimpanan
f.    Sistem Pergudangan

2.    Konsep dan Strategi Penyediaan Material
a.    Prinsip Manajemen Material
b.    Klasifikasi Barang Persediaan

3.    Pengendalian Persediaan
a.    Sistem Pengisian Kembali
b.    Konsep Minimum-Maksimum
c.    Sistem Pemesanan Ekonomis

4.    Ongkos-ongkos Persediaan

5.    Persediaan Pengaman

6.    Pengendalian Tepat Waktu
a.    Konsep Dasar
b.    Elemen Tepat Waktu
c.    Aplikasi

HARGA INVESTASI/PESERTA :

  1. Rp 7.950.000/peserta (bayar penuh)  atau
  2. Rp 7.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp 7.500.000/peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Ating Sudradjat,MSc. adalah alumnus Teknik Industri ITB Bandung. Beliau adalah dosen Teknik Mesin di Politeknik ITB(POLBAN). Untuk mempertajam kemampuannya beliau sudah pernah terjun ke lapangan/perusahaan secara langsung, seperti Chief Technician di PT pamindo tiga t Jakarta selama 5 tahun, lalu menjadi Technical Manager di CV karya mandiri Bandung. Beliau juga pernah menjadi dosen di Polytechnic Education Development Center selama 11 tahun. Menjadi Technical Director di PT Pinangmas Energi Cakrawala Jakarta. Lalu di Cakrawala Optimus Explorer Bandung. Consultant & Trainer pada beberapa lembaga diantaranya di PT.MMS dan Logistic System di PT WKM. Beliau sudah sering mengajar pelatihan untuk perusahaan di Indonesia di bidang topik keahlian beliau diantaranya tentang material handling, maintenance, database system for Mechanical Engineering, Planning and Scheduling Maintenance dan lain-lain. Melalui pelatihan/training beliau akan sharing pengalaman dan kemampuan akademis beliau kepada peserta pelatihan.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246