DIESEL GUNSET: OPERATION AND MAINTENANCE (BANDUNG)

Jadwal Training

DIESEL GUNSET: OPERATION AND MAINTENANCE (BANDUNG) TRAINING TIME  :   14 Jun 2016-17 Jun 2016 19 Jul 2016-22 Jul 2016 02 Aug 2016-05 Aug 2016 ... Baca Selengkapnya

DIESEL GUNSET: OPERATION AND MAINTENANCE (BANDUNG)

Jadwal Training

DIESEL GUNSET: OPERATION AND MAINTENANCE (BANDUNG)

TRAINING TIME  :  

  • 14 Jun 2016-17 Jun 2016
  • 19 Jul 2016-22 Jul 2016
  • 02 Aug 2016-05 Aug 2016
  • 20 Sep 2016-23 Sep 2016
  • 18 Oct 2016-21 Oct 2016
  • 21 Nov 2016-24 Nov 2016
  • 27 Dec 2016-30 Dec 2016

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :    4 hari

PENDAHULUAN: :
Diesel Gun Set merupakan untuk alat penyedia energi listrik. Diesel Gun Set digunakan sebagai cadangan penyedia energi listrik bila penyedia listrik utama dari PLN terjadi gangguan. Walaupun sebagai cadangan dalam pengoperasiannya harus dilakukan dengan benar dan harus dirawat secara intensif, sehingga bila terjadi gangguan penyedia listrik utama Diesel Gun Set siap untuk dioperasikan. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Operasi dan Perawatan Diesel Gun Set.

MANFAAT YANG DIPEROLEH:
Membekali peserta tentang wawasan dan pegetahuan operasi mesin disel dan generator dan keahlian dalam perawatan diesel gun set. Setelah mengikuti pelatihan ini, peserta diharapkan mampu:

  • Memahami dan menjelaskan dasar termodinamika dan mesin disel
  • Memahami dan menjelaskan prinsip kerja dan konstruksi mesin disel
  • Menjelaskan sistem starting dan charging
  • Menjelaskan prinsip kerja dan konstruksi generator
  • Menjelaskan instrumen pada generator
  • Menjelaskan perawatan berkala generator (disel gun set).

CAKUPAN MATERI TRAINING :

  1. Dasar termodinamika dan mesin disel
  2. Prinsip kerja dan konstruksi mesin disel
  3. Sistem bahan bakar, pendinginan, dan pelumasan
  4. Sistem starting dan charging
  5. Prinsip kerja dan konstruksi generator
  6. Instrumen pada generator
  7. Perawatan berkala generator (diesel gun set)

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ?:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perawatan mesin pada industri manufaktur dan industri minyak.

INSTRUCTOR :    Ir. Maridjo,MT. and Team

INVESTATION PRICE/PERSON :   
1.    Rp 7.950.000/person (full fare)  or
2.    Rp 7.750.000/person (early bird, payment 1 week before training)  or
3.    Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Modul Training
2.    Flashdisk Training berisi materi training
3.    Sertifikat
4.    ATK: NoteBook dan Ballpoint
5.    T-Shirt
6.    Ransel
7.    Foto Training
8.    Ruang Training dengan fasilitas Full AC dan multimedia
9.    Makan siang dan 2 kali coffeebreak
10.    Instruktur yang Qualified
11.    Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balongan pertamina, PT. Indocement, some PLTA, some hotels, PT.Pupuk Kujang, PT.Bio Farma, BPPT, PT. Bintang Agung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Perawatan Belt Conveyor (BANDUNG)

Jadwal Training

Perawatan Belt Conveyor (BANDUNG) Tanggal 20 Jun 2016-22 Jun 2016 27 Jul 2016-29 Jul 2016 08 Aug 2016-10 Aug 2016 26 Sep 2016-28 Sep 2016 ... Baca Selengkapnya

Perawatan Belt Conveyor (BANDUNG)

Jadwal Training

Perawatan Belt Conveyor (BANDUNG)

Tanggal

  • 20 Jun 2016-22 Jun 2016
  • 27 Jul 2016-29 Jul 2016
  • 08 Aug 2016-10 Aug 2016
  • 26 Sep 2016-28 Sep 2016
  • 24 Oct 2016-26 Oct 2016
  • 14 Nov 2016-16 Nov 2016
  • 19 Dec 2016-21 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

PENGANTAR :
Conveyor digunakan sebagai komponen dalam warehousing dan distribusi terautomasi, membuat lebih efisien dalam manufacturing dan distribution. Merupakan sistem penghematan tenaga kerja yang memperkenankan volume besar bergerak cepat dalam proses, memperkenankan perusahaan mengapalkan atau menerima volume yang lebih besar dengan ruang penyimpanan yang lebih kecil dan pengeluaran untuk tenaga kerja yang lebih rendah. Belt conveyor umumnya agak sama dalam konstruksi yang terdiri dari frame metal dengan roller pada ujung bed yang flat metal. Perawatan belt conveyor tidak hanya termasuk perawatan belt itu sendiri tetapi juga termasuk perawatan dan pemeliharaan dari frame dan aksesoris-aksesoris. Training ini dirancang untuk memaparkan bagaimana cara-cara dalam maintenance dari belt conveyor. Setelah training ini peserta diharapkan memahami prinsip dan cara-cara perawatan dari belt conveyor dan bisa menerapkannya di lapangan.

CAKUPAN MATERI TRAINING :
1. Pendahuluan
a) Pengertian
b) Jenis – jenis pemindah bahan
c) Pemilihan mesin pemindah bahan

2. Belt Conveyor
a) Penggunaan di industry
b) Prinsip kerja
c) Penggolongan
d) Konstruksi
e) Bagian bagian belt conveyor
f) Kapasitas mesin conveyor
g) Tahanan gerak
h) Menentukan tarikan efektif dan daya motor
i) Jenis peralatan pemindah
j) Perhitungan belt conveyor
k) Manfaat conveyor
l) Pertimbangan desain
m) Pemilihan belt, pullay & shaft
n) Pengoperasian
o) Kerusakan dan Perawatan
p) Keselamatan kerja pada conveyor
q) Motor
r) Instrumen dan control pada belt conveyor

3. Studi kasus dan diskusi

DURASI TRAINING : 3 hari

INVESTASI/PESERTA :

  1. Rp 5.950.000/person (full fare)  or
  2. Rp 5.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 5.500.000/person (if there are 3 or more participants from the same company)

FASILITAS UNTUK PESERTA :

  • Modul Training
  • Flashdisk berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • Jaket atau rompi atau T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, conveyor system and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balongan pertamina, PT. Indocement, some PLTA, some hotels, PT.Pupuk Kujang, PT.Bio Farma, BPPT, PT. Bintang Agung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

Ir. Ali Mashar, M.Eng.Sc. is graduated from New South Wales University (UNSW) Sydney Australia. His core expertise is power and control or electric engineering. he has been head of study program of energy convertion engineering Poltek ITB (Polban) and being lecturer there. And also He has been head of laboratory of energy engineering PEDC and becoming lecturer. He has taught some topics in training class for participants from various companies in Indonesia.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Diesel Engine: Operation And Maintenance (BANDUNG)

Jadwal Training

Diesel Engine: Operation And Maintenance (BANDUNG) Tanggal 25 Jul 2016-28 Jul 2016 30 Aug 2016-02 Sep 2016 13 Sep 2016-16 Sep 2016 11 Oct 2016-14 ... Baca Selengkapnya

Diesel Engine: Operation And Maintenance (BANDUNG)

Jadwal Training

Diesel Engine: Operation And Maintenance (BANDUNG)

Tanggal

  • 25 Jul 2016-28 Jul 2016
  • 30 Aug 2016-02 Sep 2016
  • 13 Sep 2016-16 Sep 2016
  • 11 Oct 2016-14 Oct 2016
  • 14 Nov 2016-17 Nov 2016
  • 19 Dec 2016-22 Dec 2016

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :    4 hari

PENDAHULUAN:
Salah satu penggerak mula dari kelompok mesin pembakaran dalam atau motor bakar torak yang menggunakan beberapa silinder yang di dalamnya terdapat torak yang bergerak translasi (bolak-balik) dan di dalam silinder terjadi pembakaran antara bahan bakar dengan oksigen dari udara yaitu Mesin Disel. Yang perlu diperhatikan oleh pengguna mesin disel antara lain pebandingan kompresi, sistem bahan bakar, penyemprotan bahan bakar, pompa bahan bakar, proses pembakaran dan bahan bakar, ruang bakar, dan konstruksi umum mesin disel, serta perawatannya. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi operation and maintenance of diesel engine.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang operasi dan perawatan mesin disel pada power plant dan industri minyak.

TUJUAN TRAINING :
Setelah mengikuti training ini diharapkan para peserta memiliki pemahaman lebih  tentang pengetahuan operasi mesin disel dan keahlian dalam perawatan mesin disel.

CAKUPAN MATERI TRAINING :

  1. Engine Reviews.
    Engine classifications & working principles (two strikes & four strikes) diesel engine measurement (capacity efficiency, torque, speed and power), engine components and function engine system.
  2. Combustion System.
    Internal combustion system
  3. Trouble Shooting and Maintenance Diesel Engine.
    Engine performance curves and controls system, inspection, tuning & used of Engine analyser, adjustment inspection, maintenance and repair, troubleshooting analysis.
  4. Power Transmission
    Coupling, gear train, V-Belt, and chain.
  5. Safety Precautions.

INSTRUCTOR :    Ir. Maridjo, MT. and Team

INVESTATION PRICE/PERSON :   

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balongan pertamina, PT. Indocement, some PLTA, some hotels, PT.Pupuk Kujang, PT.Bio Farma, BPPT, PT. Bintang Agung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Perhitungan Ketidakpastian Hasil Pengukuran dan Pengujian (BANDUNG)

Jadwal Training

Perhitungan Ketidakpastian Hasil Pengukuran dan Pengujian (BANDUNG) Tanggal 20 Jun 2016-22 Jun 2016 25 Jul 2016-27 Jul 2016 08 Aug 2016-10 Aug 2016 26 Sep ... Baca Selengkapnya

Perhitungan Ketidakpastian Hasil Pengukuran dan Pengujian (BANDUNG)

Jadwal Training

Perhitungan Ketidakpastian Hasil Pengukuran dan Pengujian (BANDUNG)

Tanggal

  • 20 Jun 2016-22 Jun 2016
  • 25 Jul 2016-27 Jul 2016
  • 08 Aug 2016-10 Aug 2016
  • 26 Sep 2016-28 Sep 2016
  • 24 Oct 2016-26 Oct 2016
  • 21 Nov 2016-23 Nov 2016
  • 27 Dec 2016-29 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   3  days

PENDAHULUAN :
Dalam era perdagangan bebas saat ini, parameter keberterimaan suatu produk ditentukan oleh suatu spesifikasi yang berlaku universal. Kesesuaian terhadap spesifikasi tersebut ditentukan oleh suatu batas tertentu di sekitar nilai yang diinginkan, yang kemudian disebut ketidakpastian. Perbedaan metode penaksiran ketidakpastian menyebabkan ditolaknya suatu komoditi ke negara lain yang mempunyai metode yang berbeda. Untuk mencegah hambatan perdagangan tersebut, beberapa organisasi internasional seperti ISO sepakat untuk menyusun suatu pedoman yang berlaku universal. Setiap laboratorium kalibrasi/pengujian yang terakreditasi diharuskan memiliki prosedur untuk mengestimasi ketidakpastian pengukuran, hal ini dinyatakan dalam klausul 5.4 (metoda pengujian,kalibrasi dan validasi metode) persyaratan teknis ISO/IEC 17025

CAKUPAN MATERI TRAINING :

  1. Pendahuluan
    • Istilah dan definisi
    • Konsep dasar
  2. Analisis Matematik dan Statistika dalam penafsiran ketidakpastian
    • Bentuk-bentuk distribusi peluang
      • Distribusi Persegi
      • Distribusi Segitiga
      • Distribusi Normal
      • Distribusi U
      • Distribusi Poison
    • Garis Besar ISO Guide
    • Sumber Ketidakpastian Pengukuran
    • Klasifikasi Komponen Ketidakpastian
    • Evaluasi Ketidakpastian
  3. Pengukuran
    • Definisi
    • Dasar-dasar pengukuran
  4. Studi Kasus Perhitungan Ketidakpastian

MANFAAT YANG DIPEROLEH:
Setelah mengikuti training ini diharapkan peserta :

  • Mampu memahami pentingnya perhitungan ketidakpastian.
  • Mampu membedakan parameter-parameter dalam pengukuran untuk perhitungan ketidakpastian.
  • Mampu menyusun skema perhitungan ketidakpastian.
  • Mampu menghitung dan menganalisa hasil perhitungan ketidakpastian.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI? :
Manajer Teknik dan staf yang berkecimpung dalam kegiatan pengukuran dan pengujian ( dalam industri khususnya pada bagian Quality Control dan Quality Assesment).

INVESTATION PRICE/PERSON :     

  • Rp 5.950.000/peserta (bayar penuh)  atau
  • Rp 5.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp 5.500.000/peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with Full AC facilities and multimedia
9.    Lunch and twice coffeebreak every day of training
10.    Qualified Instructor
11.    Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Mahaputra is gradudated from Physiscs Engineering, Bandung Institute of Technology (ITB). And now he is researcher at Balai Besar Pengembangan Industri Logam dan Mesin (BBLM/MIDC Bandung, kementerian perindustrian RI ) section calibration and testing. To improve his knowledge many training has been followed by him in Indonesia and abroad such as Training Non Destructive Test Level I (MT, UT), Training Theory and Practices on Technology of Heat Treatment, Training  XMET 2000 PMI Operation and Maintenance, Training Industrial Radiographic Testing (RT) Level I (Operator Radiografi), Training NDT UT Level II Weld Plate and Pipe, Training  and Operation Unit Oxford ARC-MET 8000, Training on Non Destructive Inspection Technique for Quality Management and Plant Asset Management, Training Industrial Radiographic Testing (RT) Level II (Ahli Radiografi) etc.  His core expertise is

  • NDT- MT/UT ASNT Level I
  • NDT- UT ASNT Level II
  • NDT – RT Level I (Operator Radiografi), ISO 9712:1999
  • NDT – RT Level II (Ahli Radiografi), ISO 9712:1999

He has been doing some field testing to several companies in Indonesia, such as ultrasonic testing for Welding Repair Dredge Bucket PT.Timah, Radiography testing for LPG 3 KG tank, ultrasonic testing for Welding Repair Retaining Ring turbin Indonesian Power, chemical composition testing  of spectrometer at Platform PT.Total E&P Indonesia, chemical composition testing  of spectrometer at Platform PT. CNOOC, and etc.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Alignment And Vibration Inspection System (BANDUNG)

Jadwal Training

Alignment And Vibration Inspection System (BANDUNG) WAKTU TRAINING :   20 Jun 2016-23 Jun 2016 25 Jul 2016-28 Jul 2016 08 Aug 2016-11 Aug 2016 26 ... Baca Selengkapnya

Alignment And Vibration Inspection System (BANDUNG)

Jadwal Training

Alignment And Vibration Inspection System (BANDUNG)

WAKTU TRAINING :  

  • 20 Jun 2016-23 Jun 2016
  • 25 Jul 2016-28 Jul 2016
  • 08 Aug 2016-11 Aug 2016
  • 26 Sep 2016-29 Sep 2016
  • 24 Oct 2016-27 Oct 2016
  • 21 Nov 2016-24 Nov 2016
  • 27 Dec 2016-30 Dec 2016

TEMPAT TRAINING :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

DURASI TRAINING :   4 hari

LATAR BELAKANG :
Getaran berlebihan pada mesin dapat disebabkan oleh mislignment, mislevelling dan unbalance yang dapat mengakibatkan life time dari mesin rendah. Setiap mesin yang diinstalasi atau dirakit tidak diperbolehkan melebihi standar misalignment, mislevelling, dan unbalance. Semakin tinggi putaran mesin yang digunakan maka harus semakin teliti dalam melakukan leveling, alignment, dan balancing. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Alignment, Levelling, and Rotor Balancing.

SASARAN PESERTA :
Para praktisi tingkat operator, tingkat penyedia atau perencana bidang disain dan perawatan mesin pada industri manufaktur dan industri minyak.

OUPUT TRAINING :

  1. Pemahaman tentang pengetahuan balancing, levelling, dan alignment.
  2. Keahlian dalam melakukan alignment, levelling, dan balancing secara manual dan menggunakan laser.

CAKUPAN MATERI TRAINING:

  1. Balancing
    • Prinsip dan jenis balancing
    • Balancing statik dan dinamik
    • Balancing roda gerinda
    • Balancing rotor dan kopel poros
  2. Teknik levelling
  3. Alignment
    • Akibat, jenis, dan standar misalignment
    • Teknik alignment poros
    • Alignment poros dengan pisau rata, dial indicator, dan laser

INSTRUKTUR :     Ir. M.Munir Fahmi, Dipl.ME.,MT. and Team

INVESTATION PRICE/PERSON :    

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. M. Munir Fahmi, Dipl.ME, MT. got his master degree from Brawijaya University Malang majoring in Energy Conversion. He is till now becoming lecturer at mechanical engineering Poltek ITB (Polban) and he is head of laboratory of fluid, thermal and otomotive. He teachs frequently for industrial training class for Indonesian companies participants for some topics on mechanical engineering such as Mechanical Rotating Equipment, Operation & Trouble Shooting, Pumps, Primover: Operation, Maintenance & Troubleshooting, Genset, Operation, Maintenance & Trouble Shooting, lubrication, Preventive & Predictive Maintenance, Advance Maintenance Management, Reliability Maintenance Engineering, Operation, Maintenance & Trouble Shooting of Pump & Compressor and etc.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pemrograman Mikrokontroler AVR dengan Codevisionavr (BANDUNG)

Jadwal Training

Pemrograman Mikrokontroler AVR dengan Codevisionavr (BANDUNG) TUJUAN  TRAINING: Peserta mampu memprogram Mikrokontoler AVR untuk berbagai macam keperluan,termasuk keperluan industri, diantaranya membuat alat keamanan rumah, membuat ... Baca Selengkapnya

Pemrograman Mikrokontroler AVR dengan Codevisionavr (BANDUNG)

Jadwal Training

Pemrograman Mikrokontroler AVR dengan Codevisionavr (BANDUNG)

TUJUAN  TRAINING:
Peserta mampu memprogram Mikrokontoler AVR untuk berbagai macam keperluan,termasuk keperluan industri, diantaranya membuat alat keamanan rumah, membuat berbagai macam alat ukur, jam digital, dan sebagainya.

CAKUPAN MATERI TRAINING :

  1. Pengenalan Mikrokontoler AVR: ATMega8535, ATMega32, ATMega128, AtTiny13, dan CodeVisionAVR
  2. Dasar-dasar Elektronika dan Teknik Digital
  3. Pemrograman Bahasa C
  4. Input Output, LCD, dan seven segmen
  5. Analog to Digital Converter (ADC) dan Comparator
  6. Interupsi
  7. Timer, Counter, dan Pulse Width Modulation (PWM)
  8. Komunikasi Serial
  9. EEPROM
  10. Aplikasi Motor DC dan Sensor Ultrasonik

INSTRUKTUR :   Oka Mahendra,ST.  and Team

TEMPAT TRAINING :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

DURASI TRAINING :    3 hari

WAKTU TRAINING :  

  • 18 Jul 2016-20 Jul 2016
  • 22 Aug 2016-24 Aug 2016
  • 05 Sep 2016-07 Sep 2016
  • 03 Oct 2016-05 Oct 2016
  • 21 Nov 2016-23 Nov 2016
  • 27 Dec 2016-29 Dec 2016

HARGA INVESTASI/ PESERTA :   

  • Rp.6.750.000 /peserta (bayar penuh)  atau
  • Rp.6.500.000 /peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp.6.250.000 /peserta (grup, untuk 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

  • Modul Training
  • Flash Disk berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan  fasilitas full AC dan multimedia
  • Lunch dan 2 kali coffeebreak
  • Instruktur yang  qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training-PP (jika minimal ada 4 peserta dari 1 perusahaan yang sama)
  • Setiap peserta disediakan 1 komputer dan disediakan seluruh komponen untuk kebutuhan training, paket mikrokontroler dan seluruh peralatan terkait

INSTRUKTUR TRAINING
Oka Mahendra adalah seorang peneliti aktif di Lembaga Ilmu Pengetahuan Indonesia (LIPI). Bidang penelitian yang dikuasainya adalah otomasi, embedded system, robotika, dan telekomunikasi. Paper-paper beliau banyak di terbitkan di jurnal atau prosiding nasional/internasional dengan topik datalogger dan online monitoring.  Spesialiasi beliau adalah membuat aplikasi praktis berbasis mikrokontroler untuk keperluan khusus, termasuk industri, online monitoring, dan robotika. Bersama tim UNISSULA, beliau pernah menjadi finalis Kontes Robot Indonesia (KRI). Sejak tahun 2009 sampai sekarang, beliau mengembangkan stasiun cuaca berbasis mikrokontroler. Beberapa stasiun cuaca hasil desain beliau saat ini terpasang di Bandung, Jakarta, Bangka Belitung, dan tempat-tempat lain di Indonesia. Beliau memiliki pengalaman mengajar sebagai dosen di kampus Bina Sarana Informatika (BSI) Bandung. Teori yang kuat didukung pengalaman praktek langsung membuat Beliau menjadi handal dan pengalaman ini akan Beliau share di kelas training Beliau.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Application Statistic in Engineering Industry (BANDUNG)

Jadwal Training

Application Statistic in Engineering Industry (BANDUNG) Tanggal 13 Jun 2016-16 Jun 2016 18 Jul 2016-21 Jul 2016 22 Aug 2016-25 Aug 2016 19 Sep 2016-22 ... Baca Selengkapnya

Application Statistic in Engineering Industry (BANDUNG)

Jadwal Training

Application Statistic in Engineering Industry (BANDUNG)

Tanggal

  • 13 Jun 2016-16 Jun 2016
  • 18 Jul 2016-21 Jul 2016
  • 22 Aug 2016-25 Aug 2016
  • 19 Sep 2016-22 Sep 2016
  • 17 Oct 2016-20 Oct 2016
  • 21 Nov 2016-24 Nov 2016
  • 27 Dec 2016-30 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

DESCRIPTIONS
Setiap proses pengukuran akan menghasilkan data pengukuran, yaitu kumpulan harga hasil pengukuran. Berdasarkan data pengukuran penjelasan seharusnya dapat disimpulkan sehingga hasil pengukuran menjadi lebih berarti, yaitu sesuai dengan tujuan pengukuran. Seperti halnya pembuatan produk maka proses pengukuran juga mengalami variasi, yang berarti hasilnya mungkin akan lain apabila proses pengukuran diulangi. Besar kecilnya perbedaan ini dipengaruhi oleh proses pengukuran (metoda, alat ukur, benda ukur, lingkungan, pengukur) dan kecermatan alat ukur.

Apabila variasi harganya adalah sedemikian rupa sehingga sulit untuk membedakannya, atau angka-angka yang harus diperiksa terlalu banyak, maka diperlukan  metoda analisis yang dapat diandalkan yang mampu menunjukkan kesamaan atau perbedaan secara lebih jelas. Keterangan mengenai seberapa jauh harga-harga pengukuran bervariasi menentukan ketepatan proses pengukuran yang bersangkutan. Sementara itu, perbedaan antara harga rata-rata dengan memperhatikan aspek variasi data pengukuran menentukan ketelitian antara ke tiga data yang diperbandingkan. Metoda untuk menganalisis harga-harga yang bervariasi telah dikenal dengan nama analisis statistika. Ilmu statistika dikembangkan menjadi metoda analisis data yang dapat diandalkan untuk menentukan kesimpulan yang sejelas mungkin dengan keraguan sesedikit mungkin. Hal ini otomatis akan mengarah pada perancangan metoda penelitian yang paling sesuai dengan masalah yang dihadapi guna menuju pada analisis data dengan keunggulan seperti yang dijanjikan.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Statistik Aplikasi Industri (Application Statistic in Industry).

TUJUAN TRAINING :
Membekali peserta tentang wawasan dan pengetahuan analisis data pengukuran menggunakan metoda statistik di mana setelah mengikuti pelatihan ini, peserta diharapkan mampu:

  1. Memahami dan menjelaskan konsep dasar statistik teknik
  2. Memahami dan menjelaskan disteibusi normal
  3. Menjelaskan distribusi harga rata-rata
  4. Menjelaskan analisis perbandingan data
  5. Menjelaskan analisis regresi

CAKUPAN MATERI TRAINING :

  1. Konsep dasar statistik teknik.
    Keandalan analisis statistika, parameter analisis statistika, pengembangan ilmu statistika.
  2. Distribusi normal.
    Harga rata-rata batas, varian teoretik, deviasi standar teoretik, persamaan matematik kurva distribusi, normal, sifat penting kurva distribusi normal, variabel standar, fungsi distribusi normal standar, fungsi distribusi komulatif standar, kurva distribusi normal standar, nilai kemungkinan komulatif, garis linier distribusi normal standar.
  3. Distribusi harga rata-rata.
    Dalil limit tengah, deviasi standar variabel, kurva distribusi normal harga rata-rata, nilai kemungkinan variabel, selang kepercayaan, limit kepercayaan, tingkat kepercayaan, karakteristik populasi variabel stokastik.
  4. Distribusi – t (student distribution).
    Variabel – t, derajat kebebasan, kurva distribusi – t, tes hipotesa, analisis aplikasi teknik.
  5. Analisis perbandingan data (analisis varian).
    • Analisis perbandingan dua data (Pemeriksaan kedua harga varian sampel (Fisher Test),  fraktil distribusi rasio varian, pemeriksaan kedua harga rata-rata sampel,  fraktil distribusi – t, analisis aplikasi teknik).
    • Analisis perbandingan k-data (Pemeriksaan k – varian (M.S Bartlett),  fraktil distribusi chi kuadrat, pemeriksaan k – harga rata-rata, fraktil distribusi rasio varian, perhitungan selang kepercayaan, analisis aplikasi teknik).
  6. Analisis regresi
    • Analisis regresi linier tanpa pengamatan ulang (Konsep analisis regresi: kovarian, variabel bebas dan tak bebas, koefisien korelasi, analisis korelasi, Konsep analisis regresi: kovarian, variabel bebas dan tak bebas, koefisien korelasi, analisis korelasi, analisis regresi, fungsi linier teoretik dan empirik, konstanta garis linier empirik (konstanta a dan b), harga varian di sekitar garis regresi, varian dan derajat kebebasan garis empirik, selang kepercayaan garis linier empirik, langkah-langkah dan beberapa hal penting analisis regresi linier tanpa pengamatan ulang, analisis aplikasi teknik)
    • Analisis regresi untuk fungsi non linier (Beberapa fungsi non linier, transformasi bentuk linier,  langkah-langkah analisis regresi fungsi non linier, analisis aplikasi teknik)
    • Perbandingan dua garis regresi linier (Pemeriksaan dua varian garis regresi (Fisher Test), fraktil distribusi rasio varian, pemeriksaan kesejajaran dua garis regresi, fraktil distribusi – t, pemeriksaan kesamaan dua garis sejajar, tes perhitungan untuk data garis regresi gabungan, analisis aplikasi teknik)
    • Perbandingan k-garis regresi linier (Pemeriksaan kesamaan k – varian garis regresi (Bartlett Test), fraktil distribusi chi kuadrat, pemeriksaan kesejajaran k – varian garis regresi,  fraktil distribusi rasio varian, pemeriksaan ke linieran garis regresi yang melalui k – titik tengah, fraktil distribusi – t, perhitungan untuk data garis regresi gabungan, analisis aplikasi teknik).

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang statistik atau kontrol kualitas produk pada industri rekayasa.

INVESTATION PRICE/PERSON :

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

Fasilitas

  • Modul Training
  • Flashdisk Training berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Trainer
SUGENG ISDWIYANUDI, Ir. MT. And Team
was graduated from politeknik universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering.

Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence.

He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibratio , Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Oerator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System. In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system.

In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director asistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Control System Fundamentals (BANDUNG)

Jadwal Training

Control System Fundamentals (BANDUNG) TRAINING INTRODUCTION : Introduces concept, principles and practice of control systems, digital control systems and microprocessor based controller (DCS and PLC). ... Baca Selengkapnya

Control System Fundamentals (BANDUNG)

Jadwal Training

Control System Fundamentals (BANDUNG)

TRAINING INTRODUCTION :
Introduces concept, principles and practice of control systems, digital control systems and microprocessor based controller (DCS and PLC). Covers the principles and practice of proportional (P), proportional-integral (PI) and proportional-integral-derivative (PID) controllers.

TRAINING OBJECTIVE:

  1. To understand concept, principles & practice of control systems
  2. To understand feedback systems
  3. To understand digital controller
  4. To understand microprocessor based controller
  5. To understand real-time control
  6. To know better control application

TRAINING MATERIAL OUTLINE:

  1. Introduction to control systems
  2. Introduction to feedback systems
  3. Systems representation of sensor, controller, transmitter and actuator
  4. Modelling of controlled systems
  5. Dynamics of controlled systems
  6. Number systems (decimal, biner, hexadecimal)
  7. Analog to digital converter
  8. Digital to analog converter
  9. Sampling and Aliasing
  10. Effect of sampling in digital controller
  11. Digital controller
  12. Performance objectives
  13. Digital P, PI, PID controller
  14. Study case/hands on exercise

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:

  1. Practical work using available software & hardware
  2. CasesStudy

INSTRUCTOR : Ir.Endra Joelianto, Ph.D. and team

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION :
4 days

TRAINING TIME :

  • 06 Jun 2016-09 Jun 2016
  • 25 Jul 2016-28 Jul 2016
  • 29 Aug 2016-01 Sep 2016
  • 13 Sep 2016-16 Sep 2016
  • 10 Oct 2016-13 Oct 2016
  • 29 Nov 2016-02 Dec 2016
  • 27 Dec 2016-30 Dec 2016

INVESTMENT PRICE/PERSON:

  1. Rp 8.500.000/person (full fare) or
  2. Rp 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia. He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung. He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB.He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Refractory And Heat Insulation (BANDUNG)

Jadwal Training

Refractory And Heat Insulation (BANDUNG) Tanggal 21 Jun 2016-24 Jun 2016 25 Jul 2016-28 Jul 2016 23 Aug 2016-26 Aug 2016 27 Sep 2016-30 Sep ... Baca Selengkapnya

Refractory And Heat Insulation (BANDUNG)

Jadwal Training

Refractory And Heat Insulation (BANDUNG)

Tanggal
21 Jun 2016-24 Jun 2016
25 Jul 2016-28 Jul 2016
23 Aug 2016-26 Aug 2016
27 Sep 2016-30 Sep 2016
25 Oct 2016-28 Oct 2016
31 Oct 2016-03 Nov 2016
27 Dec 2016-30 Dec 2016

Jam Pelaksanaan
08.30-17.00 WIB

empat
Hotel Golden Flower Bandung

INTRODUCTION
Training ini ditujukan kepada peserta yang ingin memahami tentang refraktori dan material refraktori serta aplikasi pada heat insulation. Banyaknya radiasi panas dan adanya system suhu rendah pada banyak lokasi di industry membawa kita kepada perlunya pemahaman yang baik tentang teknologi untuk mengaturnya. Setelah training ini peserta bisa memahami teknologi yang berkaitan dengan refractori dan heat insulation dan bagaimana mengimplementasikannya di lapangan.

TRAINING MATERIAL OUTLINE/CAKUPAN MATERI TRAINING

  • Introduksi perpindahan panas: konduksi, konveksi dan radiasi
  • Perpindahan panas gabungan konduksi, konveksi dan radiasi
  • Angka konduksi material
  • Physical properties of heat insulating materials
  • Physical properties of heat refractories materials
  • Pengelompokkan (class) insulator
  • Pemilihan insulator dan refraktori
  • Pengaruh ketebalan insulator pada laju perpindahan panas
  • Ketebalan kritis insulator
  • Efek konduksi lingkungan pada penyekatan (insulasi) panas
  • Dinding ruang bakar
  • Insulator temperatur tinggi
  • Insulator temperatur rendah (refrigerasi dan pengkondisian udara)
  • Ekspansi dan penyusutan termal
  • Troubleshooting insulating materials and refractories
  • Studi kasus dan diskusi

INSTRUCTOR
Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti Coal Energy Training, Argonne, Chicago, Ill., USA, Combustion Training, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy. Pak Pawito Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training untuk banyak perusahaan di Indonesia diantaranya seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC SES LTD, PLTGU BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain. Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

INVESTATION PRICE/PERSON

  • Rp 8.500.000/person (full fare)  or
  • Rp 8.250.000/person (early bird, payment 1 week before training)  or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

HAZID (HAZARD IDENTIFICATON) BANDUNG

Jadwal Training

HAZID (HAZARD IDENTIFICATON) BANDUNG Tanggal 07 Jun 2016-10 Jun 2016 26 Jul 2016-29 Jul 2016 23 Aug 2016-26 Aug 2016 13 Sep 2016-16 Sep 2016 ... Baca Selengkapnya

HAZID (HAZARD IDENTIFICATON) BANDUNG

Jadwal Training

HAZID (HAZARD IDENTIFICATON) BANDUNG

Tanggal

  • 07 Jun 2016-10 Jun 2016
  • 26 Jul 2016-29 Jul 2016
  • 23 Aug 2016-26 Aug 2016
  • 13 Sep 2016-16 Sep 2016
  • 11 Oct 2016-14 Oct 2016
  • 29 Nov 2016-02 Dec 2016
  • 27 Dec 2016-30 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

INTRODUCTION :
Hydrocarbon processing industry is categorized as a high risk industry due to the hazards containing either in the material processed or the operations used in its facilities. Because of its vulnerability, a simple event, either man-made or natural one may lead to significant disasters. Flixborough, Bhopal and Piper Alpha disasters are three classic examples of major accident causing serious loss of life and/or property. A deep understanding on safety-related aspects of the materials and processes or operations implemented in hydrocarbon facilities is therefore critical to operate this kind of industry in safe manner and preventing it to go wrong. Hazard identification is ‘the identification of undesired events that lead to materialization of a hazard, the analysis of the mechanisms by which these undesired events could occur and usually estimation of the extent, magnitude and likelihood of any harmful effects’ This short course is intended to give understanding on HSE problems and several methods of Hazard Identification (HAZID).

WHO SHOULD ATTEND THIS TRAINING? :

  1. Process Engineers
  2. Instrument Engineers
  3. Material Engineers
  4. Structure Engineers
  5. Electrical Engineers
  6. Mechanical Engineers
  7. Safety and Environment Engineers

TRAINING MATERIAL OUTLINE :

  1. HSE Problem and Sources of Hazard
  2. Preview of Several Method of HAZID
    • Check List
    • ‘What If’ Analysis
    • PHR (Process Hazard Review)
    • ETA (Event Tree Analysis)
    • FTA (Fault Trees Analysis)
    • FMEA (Failure Mode and Effect Analysis)
  3. ETA (Event Tree Analysis)
    • Introduction to method of ETA
      1)    Objectives
      2)    Procedure
      3)    Application
    • Case Study
  4. FTA (Fault Tree Analysis)
    • Introduction to method of ETA
      1)    Objectives
      2)    Procedure
      3)    Application
    • Case Study
  5. FMEA (Failure Mode and Effect Analysis)
    • Introduction to method of FMEA
    • Limitations of FMEA
    • Procedure for FMEA
    • FMEA worksheets
    • Criticality analysis
    • Functional and Hardware FMEA/FMECA examples
    • Multi-criteria Pareto ranking
    • Common cause screening
    • Matrix method
    • Risk priority number method of FMECA
    • Fuzzy logic prioritization of failures
    • Generic part count
    • Case Study

INSTRUCTOR :  Ir. In Jumanda Kasdadi, MT. and Team

INVESTATION PRICE/ PERSON :     
1.    Rp 7.500.000/person (full fare)  or
2.    Rp 7.250.000/person (early bird, payment 1 week before training)  or
3.    Rp 6.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Ir. In Jumanda Kasdadi, MT is graduated from Chemical Engineering Bandung Institute of Technology (ITB)and now he is lecturer at chemical engineering poltek ITB (Polban).  Ir. In Jumanda Kasdadi, MT has experienced to be instructors at industrial training more than 13 years, both either  inhouse training or public training. Trainings that delivered by him for many companies  such as for oil and gas, for mining, for manufacture and etc. held in some cities in Indonesia like Jakarta, Bandung, Batam and others.

Beside training, Ir.Injumanda Kasdadi,MT also have experiences at some professional engineering working such as:

  • Risk Assessment at oil & gas
  • Project of Processing at process design
  • Facility for waste handling
  • Piping and feasibility study of pipeline in onshore and offshore
  • And others

This much valuable experiences will be shared to participants in training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Calibration Of Measuring Tool (BANDUNG)

Jadwal Training

Calibration Of Measuring Tool (BANDUNG) Tanggal 21 Jun 2016-24 Jun 2016 26 Jul 2016-29 Jul 2016 30 Aug 2016-02 Sep 2016 27 Sep 2016-30 Sep ... Baca Selengkapnya

Calibration Of Measuring Tool (BANDUNG)

Jadwal Training

Informasi Training Terbaru Update

Calibration Of Measuring Tool (BANDUNG)

Tanggal

  • 21 Jun 2016-24 Jun 2016
  • 26 Jul 2016-29 Jul 2016
  • 30 Aug 2016-02 Sep 2016
  • 27 Sep 2016-30 Sep 2016
  • 25 Oct 2016-28 Oct 2016
  • 14 Nov 2016-17 Nov 2016
  • 19 Dec 2016-22 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Investasi

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
was graduated from politeknik universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System. In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

DESCRIPTIONS
Salah satu alat yang berperan penting dalam menentukan kualitas produk, baik pembuatan maupun proses pemeriksaannya adalah alat ukur. Kondisi alat ukur dan proses pengukuran akan menentukan keterpercayaan hasil pengukuran yang diperoleh. Untuk itu selain metoda pengukuran yang benar, kondisi alat ukur yang digunakan harus tetap baik dan terjaga. Salah satu cara menjaga kondisi alat ukur agar tetap baik adalah dengan melakukan kalibrasi secara periodik terhadap alat ukur yang digunakan. Dengan demikian proses kalibrasi alat ukur tersebut menjadi syarat penting yang perlu dilakukan pengguna alat ukur dalam menghasilkan produk yang berkualitas.

Manajemen kalibrasi alat ukur merupakan aspek fungsi yang menyeluruh yang menetapkan dan menerapkan politik hasil kalibrasi. Ketercapaian tujuan yang berkaitan dengan kalibrasi alat ukur membutuhkan dukungan dan keikutsertaan semua anggota organisasi. Sementara itu, pucuk pimpinan bertanggungjawab atas keterlaksanaan manajemen kalibrasi. Manajemen kalibrasi mencakup perancangan jangka panjang (strategis), alokasi/penetapan/penunjukkan sumber daya, dan tindakan sistematik yang menyangkut kalibrasi (perencanaan, operasi/pelaksanaan, dan penilaian hasil kalibrasi).

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Kalibrasi Alat Ukur dan Manajemen Kalibrasi (Callibration of Measuring Tool and Management of Callibration).

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang kalibrasi alat ukur pada industri manufaktur.

TUJUAN TRAINING :
Setelah Pelatihan para peserta diharapkan akan lebih memiliki :

  • Keahlian untuk melakukan kalibrasi terhadap alat ukur yang digunakan maupun alat ukur yang baru.
  • Pemahaman dalam pemakaian perancangan jangka panjang, alokasi sumber daya, dan tindakan sistematik yang menyangkut kalibrasi (perencanaan, operasi/pelaksanaan, dan penilaian hasil kalibrasi).

CAKUPAN MATERI TRAINING :

  • Konstruksi dan sifat umum alat ukur
  • Ketelitian, ketepatan, dan kecermatan alat ukur
  • Besaran standar
  • Tingkatan kalibrasi alat ukur
  • Acuan standarisasi pengelolaan mutu
  • Kalibrasi alat ukur
  • Manajemen kalibrasi

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Desain Konstruksi Mesin dan Peralatan Industri (BANDUNG)

Jadwal Training

Desain Konstruksi Mesin dan Peralatan Industri (DESIGN OF MACHINE CONSTRUCTION AND INDUSTRIAL EQUIPMENT) Tanggal 19 Apr 2016-22 Apr 2016 17 May 2016-20 May 2016 14 ... Baca Selengkapnya

Desain Konstruksi Mesin dan Peralatan Industri (BANDUNG)

Jadwal Training

Desain Konstruksi Mesin dan Peralatan Industri (DESIGN OF MACHINE CONSTRUCTION AND INDUSTRIAL EQUIPMENT)

Tanggal

  • 19 Apr 2016-22 Apr 2016
  • 17 May 2016-20 May 2016
  • 14 Jun 2016-17 Jun 2016
  • 18 Jul 2016-21 Jul 2016
  • 23 Aug 2016-26 Aug 2016
  • 20 Sep 2016-23 Sep 2016
  • 18 Oct 2016-21 Oct 2016
  • 01 Nov 2016-04 Nov 2016
  • 06 Dec 2016-09 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

PENDAHULUAN :
Mesin dan peralatan digunakan untuk membuat produk atau komponen mesin dan peralatan. Konstruksi mesin dan peralatan terdiri dari elemen-elemen mesin baik elemen transmisi (poros, bantalan, roda gigi, kopling, sabuk dan puli, rantai, dsb.) dan/atau elemen sambungan (solder, paku keeling, las, dsb.) yang dirakit. Untuk menciptakan mesin dan peralatan (apabila belum ada) dilakukan terlebih dahulu proses perancangan (disain) sesuai dengan kebutuhan teknologi proses untuk membuat produk atau komponen mesin dan peralatan. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Disain konstruksi (design of construction).
 
SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang disain konstruksi pada industri rekayasa.

TUJUAN TRAINING :
Setelah mengikuti training ini diharapkan mempunyai Pemahaman tentang pengetahuan dan keahlian merancang konstruksi mesin dan peralatan industri tepat guna.

CAKUPAN MATERI TRAINING :

  1. This design class provides participants with a first exposure to real world problems.
  2. The design of simple mechanical systems.
  3. The integrate and implement the accumulated knowledge from previous classes such as how to design shaft, power screw, joins (bolted, welded, etc.), springs, bearings, and flexible power transmission elements.
  4. This course discusses more complex machine elements with regard to selection and sizing.
  5. The coverage includes elements such as brakes, clutches, friction disks, gear systems, gear geometry, nvolutes, spur, helical, bevel, and worm gears

INVESTATION PRICE/PERSON :   

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.:

Pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.

In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Disain Alat Penekan dan Pembentuk (Design Of Press And Forming Tool) BANDUNG

Jadwal Training

Disain Alat Penekan dan Pembentuk (Design Of Press And Forming Tool) BANDUNG Tanggal 10 May 2016-13 May 2016 07 Jun 2016-10 Jun 2016 25 Jul ... Baca Selengkapnya

Disain Alat Penekan dan Pembentuk (Design Of Press And Forming Tool) BANDUNG

Jadwal Training

Disain Alat Penekan dan Pembentuk (Design Of Press And Forming Tool) BANDUNG

Tanggal

  • 10 May 2016-13 May 2016
  • 07 Jun 2016-10 Jun 2016
  • 25 Jul 2016-28 Jul 2016
  • 09 Aug 2016-12 Aug 2016
  • 13 Sep 2016-16 Sep 2016
  • 11 Oct 2016-14 Oct 2016
  • 28 Nov 2016-01 Dec 2016
  • 27 Dec 2016-30 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

PENDAHULUAN :
Dalam proses produksi, selalu menimbulkan biaya langsung maupun tidak langsung. Biaya yang timbul tersebut harus diusahakan pada tingkat yang serendah mungkin tanpa mengurangi kualitasnya, sehinga produk yang dihasilkan nantinya akan mempunyai daya saing tinggi dan pemasaran yang baik, sehingga dapat meningkatkan laba perusahaan. Untuk mengurangi biaya proses produksi, maka bahan baku harus dapat di proses dalam waktu yang relatif singkat dengan pemakain faktor produksi yang rendah, dalam kaitan tersebut diperlukan sarana-sarana produksi yang efisien dalam hal pengoprerasian maupun pembuatannya. Efisiensi dan efektifitas suatu alat dan produk sangatlah dibutuhkan dengan proses produksi secara tepat, dan dapat digunakan dalam industri besar maupun industri kecil.  Alat penekan dan pembentuk merupakan salah satu dari sarana produksi efisien yang penggunaannya dalam industri-industri telah terbukti memberikan peranan yang besar dalam upaya menekan biaya produksi.  Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Disain Alat Penekan dan Pembentuk (Press and Forming Tool).

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perancangan alat penekan dan pembentuk (press dan forming tool) pada industri manufaktur.

TUJUAN TRAINING :
Setelah mengikuti training ini, diharapkan peserta mempiliki Pemahaman tentang pengetahuan dan  keahlian dalam merancang alat penekan dan pembentuk (press dan forming tool).

CAKUPAN MATERI TRAINING :

1.  Press tool

  • Prosedur perancangan cutting tool,
  • Prinsip operasi dan bagian-bagian cutting tool
  • Penentuan gaya dan clearance,
  • Perencanaan dan pembuatan cutting tool.

2.  Forming tool

  • Prinsip pembentukan,
  • Tipe alat pembentuk,
  • Penentuan gaya pembentuk dan clearance,
  • Bagian-bagian alat pembentuk,
  • Perencanaan dan pembuatan alat pembentuk

INVESTATION PRICE/PERSON :   

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.:

Pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.

In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

System Safety Engineering And Management (BANDUNG)

Jadwal Training

System Safety Engineering And Management (BANDUNG) Tanggal 04 Apr 2016-07 Apr 2016 02 May 2016-05 May 2016 30 May 2016-02 Jun 2016 19 Jul 2016-22 ... Baca Selengkapnya

System Safety Engineering And Management (BANDUNG)

Jadwal Training

System Safety Engineering And Management (BANDUNG)

Tanggal

  • 04 Apr 2016-07 Apr 2016
  • 02 May 2016-05 May 2016
  • 30 May 2016-02 Jun 2016
  • 19 Jul 2016-22 Jul 2016
  • 08 Aug 2016-11 Aug 2016
  • 05 Sep 2016-08 Sep 2016
  • 03 Oct 2016-06 Oct 2016
  • 07 Nov 2016-10 Nov 2016
  • 13 Dec 2016-16 Dec 2016

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING PURPOSE:

  1. The system safety engineering and management  is intended to describe “how” to set up and implement the safety risk management process.
  2. The system safety engineering and management  establishes a set of consistent and standardized procedures and analytical tools.
  3. The system safety engineering and management  is intended for use in support of specific system safety program plans.
  4. The system safety engineering and management  provides guidance on “how” to perform safety risk management, other questions concerning “when, who, and why” should be addressed through the three types of plans discussed in this document: System Safety Management Plan (SSMP), and a System Safety Program Plan (SSPP), and an Integrated System Safety Program Plan (ISSPP).
  5. The system safety engineering and management  focuses on “how”  to perform safety risk management, while these planning documents describe, the organization’s processes and procedures for implementing system safety.

TRAINING MATERIAL OUTLINE:

  1. Principles of System Safety
    •    Planning principles
    •    Hazard analysis
    •    Comparative safety
    •    Risk management decision making
    •    Safety order of precedence
    •    Behavioral-based safety
    •    Models used by system safety for analysis
  2. Safety Assessments Before Investment Decision
    •    Safety assessments before investment decision
    •    Operational safety
    •    Comparative safety assessment (CSA)
  3. Post-Investment Decision Safety Activities
    •    Post-investment decision safety activities
    •    Objectives and requirements
    •    Preparing a system safety program plan
    •    System safety program plan contents
    •    Integrated system safety program plan
    •    Program balance & interfaces
  4. System Safety Guidelines for Contracting
    •    contracting principles
    •    contracting
    •    evaluating bidding contractors (system safety checklist)
    •    managing contractor system safety (contract oversight)
  5. Integrated System Hazard Analysis
    •    Integrated approach
    •    Risk control
    •    Use of historical data
  6. Safety Analysis – Hazard Analysis Tasks
    •    The design process
    •    Analysis
    •    Qualitative and quantitative analysis
    •    Design and pre-design safety
    •    How to review and/or specify a safety analysis
    •    Evaluating a preliminary hazard analysis
  7. Analysis Techniques
    •    Analysis techniques
    •    Introduction
    •    Fault hazard analysis
    •    Fault tree analysis
    •    Common cause failure analysis
  8. Test and Evaluation Safety
    •    Tests conducted specifically for safety
    •    Tests conducted for purposes other than safety
    •    Test safety analysis
    •    Other test and evaluation safety considerations
  9. Facilities System Safety
    •    New facility system safety
    •    Existing facilities
    •    Facility system safety program
    •    Analytical techniques
    •    Facility risk analysis methodology
  10. Operational Risk Management (ORM)
    •    Defining risk and risk management
    •    ORM principles
    •    The ORM process summary
    •    Implementing the ORM process
  11. Human Factors Engineering and Safety Principles & Practice
    •    Human factors process overview
    •    Managing the human factors program
    •    Establish human factors requirements
    •    Conduct human factors integration
    •    Human factors in system-to-system interfaces
    •    Human factors engineering and safety guidelines
  12. Successful health and safety Management
  13. Managing health and safety
  14. Safety guidance -Notification and marking of sites

TRAINING DURATION :   4 days

INVESTATION PRICE/PERSON :   

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Caecilia Sri Wahyuning S.  Lulusan dari Institut Teknologi Bandung, dan Beliau sekarang sebagai dosen di Teknik Industri Institut Teknologi Nasional Bandung. Selain mengajar sebagai dosen, di Kampusnya Beliau juga pernah menjadi kepala laboratorium perancangan system kerja dan ergonomic dan juga menjadi PIC unit penjaminan mutu institute teknologi nasional dan kepala bagian monitoring dan evaluasi bidang non akademin UPM institute teknologi nasional. Beliau juga memiliki pengalaman riil pengerjaan projek diantaranya Pembuatan Standar Kompetensi bidang Pengelasan, Jasa Konsultansi Sumber Daya Manusia Penyediaan Konsultansi Key Performance Indicator Dalam Rangka Reformasi Birokrasi Departemen Keuangan, Jasa Konsultasi Perizinan & Studi Kelayakan Pendirian SPBU & SPPBE. Beliau terlibat secara aktif di beberapa organisasi di kampus maupun di lingkungan social. Ibu Caecilia Sri Wahyuning S.  Secara aktif melakukan penelitian dan melakukan publikasi karya ilmiah Beliau di dalam dan luar negeri. Ibu Caecilia sudah sering memberikan pelatihan/training kepada perusahaan di Indonesia untuk judul-judul di bidang kompetensi Beliau.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Teknik Perawatan Mekanik (BANDUNG)

Jadwal Training

Teknik Perawatan Mekanik (BANDUNG) Tanggal 11 Apr 2016-14 Apr 2016 09 May 2016-12 May 2016 06 Jun 2016-09 Jun 2016 26 Jul 2016-29 Jul 2016 ... Baca Selengkapnya

Teknik Perawatan Mekanik (BANDUNG)

Jadwal Training

Teknik Perawatan Mekanik (BANDUNG)

Tanggal

  • 11 Apr 2016-14 Apr 2016
  • 09 May 2016-12 May 2016
  • 06 Jun 2016-09 Jun 2016
  • 26 Jul 2016-29 Jul 2016
  • 29 Aug 2016-01 Sep 2016
  • 13 Sep 2016-16 Sep 2016
  • 10 Oct 2016-13 Oct 2016
  • 31 Oct 2016-03 Nov 2016
  • 05 Dec 2016-08 Dec 2016

TEMPAT TRAINING :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

DURASI TRAINING :   4 hari

TUJUAN :
Setelah mengikuti pelatihan Teknik Perawatan Mekanik, peserta mengetahui dan memahami tentang ;
•    Strategi perawatan komponen
•    Peralatan kerja perawatan
•    Pelumas dan Grease
•    Perawatan penyekat oli
•    Perawatan anti-friksi
•    Perawatan komponen transmisi daya

CAKUPAN MATERI TRAINING:
1.    Konsep Perawatan
•    Pengertian teknik perawatan dan strategi perawatan
•    Direct dan indirect preventive maintenance
•    Subjective dan objective maintenance
•    Planned dan unplanned maintenance
•    Prosedur dan strategi perawatan

2.    Pengukuran geometris
•    Jenis mengukuran dan jenis alat ukur geometris
•    Mensejajarkan poros terhadap bidang datar
•    Mensejajarkan poros terhadap dua bidang

3.    Pelumas dan Pelumasan
•    Fungsi, bahan dasar, sifat dan kalsifikasi minyak pelumas
•    Bahan tambah minyak pelumas
•    Fungsi dan kalasifikasi Grease

4.    Oil Seal dan Packing
•    Fungsi Oil Seal
•    O-Ring, Seal Kotak dan Packing

5.    Perawatan Bantalan
•    Konstruksi, jenis, oprasi standard dan penerapan Bantalan Gelinding
•    Pelepasan, pemasangan, inspeksi Bantalan Gelinding
•    Pemakaian, jenis, Inspeksi dan perakitan Bantalan Luncur

6.    Perawatan Transmisi Sabuk V dan Transmisi Sabuk Gilir
•    Pemakaian dan jenis Transmisi Sabuk
•    Standar, pemilihan, pemasangan dan pemeriksaan Sabuk V

7.    Perawatan Transmisi Rantai
•    Penerapan, Standar, pemilihan dan panjang Transmisi Rantai
•    Sprocket rantai
•    Pemasangan, ketegangan dan pelumasan Rantai

8.    Perawatan Transmisi Kopling
•    Fungsi, jenis, konstroksi dan pemilihan Kopling
•    Pemasangan, pelepasan dan penyebarisan Kopling

9.    Perawatan Transmisi Roda Gigi
•    Jenis-jenis, konstruksi dan pemilihan Roda Gigi
•    Pemasangan, pemeriksaan dan pelumasan Roda Gigi

10.    Perawatan Power Tools
•    Cara kerja dan klasifikasi
•    Reparasi Power Tools

INVESTATION PRICE/PERSON :    

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. M. Munir Fahmi, Dipl.ME, MT. got his master degree from Brawijaya University Malang majoring in Energy Conversion. He is till now becoming lecturer at mechanical engineering Poltek ITB (Polban) and he is head of laboratory of fluid, thermal and otomotive. He teachs frequently for industrial training class for Indonesian companies participants for some topics on mechanical engineering such as Mechanical Rotating Equipment, Operation & Trouble Shooting, Pumps, Primover: Operation, Maintenance & Troubleshooting, Genset, Operation, Maintenance & Trouble Shooting, lubrication, Preventive & Predictive Maintenance, Advance Maintenance Management, Reliability Maintenance Engineering, Operation, Maintenance & Trouble Shooting of Pump & Compressor and etc.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2026

Info Seminar | Jadwal Seminar