Instrumentation And Control System (BANDUNG)

Jadwal Training

Juli 13, 2020

Instrumentation And Control System (BANDUNG) Tanggal 13 Jul 2020-16 Jul 2020 24 Agust 2020-27 Agust 2020 14 Sep 2020-17 Sep 2020 26 Okt 2020-29 Okt ... Baca Selengkapnya

Instrumentation And Control System (BANDUNG)

Jadwal Training

Juli 13, 2020

Instrumentation And Control System (BANDUNG)

Tanggal

13 Jul 2020-16 Jul 2020
24 Agust 2020-27 Agust 2020
14 Sep 2020-17 Sep 2020
26 Okt 2020-29 Okt 2020
23 Nop 2020-26 Nop 2020
14 Des 2020-17 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION : 4 days

LATAR BELAKANG:
Sistem pengukuran merupakan bagian dari teknik instrumentasi, karena itu ada baiknya untuk memulai pembahasan dengan pengertian-pengertian dasar teknik instrumentasi. Teknik instrumentasi adalah seni dan ilmu yang mempelajari sifat-sifat benda dan hukum-hukum alam dimanfaatkan bagi kepentingan manusia melalui pengamatan, pengukuran, dan pengendalian proses fisik. Sistem kontrol adalah sistem dinamik yang menggunakan komponen mekanik, listrik, hidrolik, pneumatik. Teknik pengaturan dapat dilakukan dengan sistem operasi satu arah yang berurutan, maupun pengaturan umpan balik dengan parameter yang diatur dibandingkan dengan parameter masukan dan kesalahan yang ada digunakan untuk menurunkan kesalahan itu sendiri. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Sistem Instrumentasi dan Kontrol.

SASARAN PESERTA:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang sistem instrumenatsi dan kontrol pada industri rekayasa.

OUPUT TRAINING:
Pemahaman tentang pengetahuan sistem instrumentasi dan kontrol.

CAKUPAN MATERI TRAINING:

This course deals with measurement techniques ranging from the basic principles, sensors, up until data acquisition.
Coverage includes definition/terminologies, calibration, standards, static and dynamic signal analysis, data representation in the frequency domain, sampling theorem and aliasing, digital data acquisition, dynamic response of instruments, step response of first and second order systems, statistical analysis, measurements of temperature, strain, flow, pressure, velocity, and displacement.
This class discusses the basic of control theory and its applications.
The syllabus includes examples of control application in our daily life and in the industry, on-of controller, proportional control, PID controller, mathematical model of control system, block diagram formulation and simplifications, system stability, transient and steady state response, root locus analysis, Bode and Nyquist diagrams, and compensation design.
Considerations in implementing control, components of automatic control systems: actuators, motors, sensors, vision systems, analogy control systems, digital control systems (PC-based, PLC programming), examples; robots, NC machines, etc, design of control systems, case studies.

HARGA INVESTASI/PESERTA :
Rp. 8.500.000/person (full fare)

FASILITAS UNTUK PESERTA :

Modul Training
Flashdisk Training berisi materi training
Sertifikat
ATK: NoteBook dan Ballpoint
T-Shirt
Ransel
Foto Training
Ruang Training dengan fasilitas Full AC dan multimedia
Makan siang dan 2 kali coffeebreak
Instruktur yang Qualified
Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Aris Suryadi, MT adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

KONTAK CEPAT

Tags

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Application Statistic in Engineering Industry (BANDUNG)

Jadwal Training

Juli 13, 2020

Application Statistic in Engineering Industry (BANDUNG) Tanggal 13 Jul 2020-16 Jul 2020 10 Agust 2020-13 Agust 2020 14 Sep 2020-17 Sep 2020 12 Okt 2020-15 ... Baca Selengkapnya

Application Statistic in Engineering Industry (BANDUNG)

Jadwal Training

Juli 13, 2020

Application Statistic in Engineering Industry (BANDUNG)

Tanggal

13 Jul 2020-16 Jul 2020
10 Agust 2020-13 Agust 2020
14 Sep 2020-17 Sep 2020
12 Okt 2020-15 Okt 2020
09 Nop 2020-12 Nop 2020
14 Des 2020-17 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

DESCRIPTIONS
Setiap proses pengukuran akan menghasilkan data pengukuran, yaitu kumpulan harga hasil pengukuran. Berdasarkan data pengukuran penjelasan seharusnya dapat disimpulkan sehingga hasil pengukuran menjadi lebih berarti, yaitu sesuai dengan tujuan pengukuran. Seperti halnya pembuatan produk maka proses pengukuran juga mengalami variasi, yang berarti hasilnya mungkin akan lain apabila proses pengukuran diulangi. Besar kecilnya perbedaan ini dipengaruhi oleh proses pengukuran (metoda, alat ukur, benda ukur, lingkungan, pengukur) dan kecermatan alat ukur.

Apabila variasi harganya adalah sedemikian rupa sehingga sulit untuk membedakannya, atau angka-angka yang harus diperiksa terlalu banyak, maka diperlukan metoda analisis yang dapat diandalkan yang mampu menunjukkan kesamaan atau perbedaan secara lebih jelas. Keterangan mengenai seberapa jauh harga-harga pengukuran bervariasi menentukan ketepatan proses pengukuran yang bersangkutan. Sementara itu, perbedaan antara harga rata-rata dengan memperhatikan aspek variasi data pengukuran menentukan ketelitian antara ke tiga data yang diperbandingkan. Metoda untuk menganalisis harga-harga yang bervariasi telah dikenal dengan nama analisis statistika. Ilmu statistika dikembangkan menjadi metoda analisis data yang dapat diandalkan untuk menentukan kesimpulan yang sejelas mungkin dengan keraguan sesedikit mungkin. Hal ini otomatis akan mengarah pada perancangan metoda penelitian yang paling sesuai dengan masalah yang dihadapi guna menuju pada analisis data dengan keunggulan seperti yang dijanjikan.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Statistik Aplikasi Industri (Application Statistic in Industry).

TUJUAN TRAINING :
Membekali peserta tentang wawasan dan pengetahuan analisis data pengukuran menggunakan metoda statistik di mana setelah mengikuti pelatihan ini, peserta diharapkan mampu:

Memahami dan menjelaskan konsep dasar statistik teknik
Memahami dan menjelaskan disteibusi normal
Menjelaskan distribusi harga rata-rata
Menjelaskan analisis perbandingan data
Menjelaskan analisis regresi

CAKUPAN MATERI TRAINING :

Konsep dasar statistik teknik.
Keandalan analisis statistika, parameter analisis statistika, pengembangan ilmu statistika.
Distribusi normal.
Harga rata-rata batas, varian teoretik, deviasi standar teoretik, persamaan matematik kurva distribusi, normal, sifat penting kurva distribusi normal, variabel standar, fungsi distribusi normal standar, fungsi distribusi komulatif standar, kurva distribusi normal standar, nilai kemungkinan komulatif, garis linier distribusi normal standar.
Distribusi harga rata-rata.
Dalil limit tengah, deviasi standar variabel, kurva distribusi normal harga rata-rata, nilai kemungkinan variabel, selang kepercayaan, limit kepercayaan, tingkat kepercayaan, karakteristik populasi variabel stokastik.
Distribusi – t (student distribution).
Variabel – t, derajat kebebasan, kurva distribusi – t, tes hipotesa, analisis aplikasi teknik.
Analisis perbandingan data (analisis varian).
- Analisis perbandingan dua data (Pemeriksaan kedua harga varian sampel (Fisher Test), fraktil distribusi rasio varian, pemeriksaan kedua harga rata-rata sampel, fraktil distribusi – t, analisis aplikasi teknik).
- Analisis perbandingan k-data (Pemeriksaan k – varian (M.S Bartlett), fraktil distribusi chi kuadrat, pemeriksaan k – harga rata-rata, fraktil distribusi rasio varian, perhitungan selang kepercayaan, analisis aplikasi teknik).
Analisis regresi
- Analisis regresi linier tanpa pengamatan ulang (Konsep analisis regresi: kovarian, variabel bebas dan tak bebas, koefisien korelasi, analisis korelasi, Konsep analisis regresi: kovarian, variabel bebas dan tak bebas, koefisien korelasi, analisis korelasi, analisis regresi, fungsi linier teoretik dan empirik, konstanta garis linier empirik (konstanta a dan b), harga varian di sekitar garis regresi, varian dan derajat kebebasan garis empirik, selang kepercayaan garis linier empirik, langkah-langkah dan beberapa hal penting analisis regresi linier tanpa pengamatan ulang, analisis aplikasi teknik)
- Analisis regresi untuk fungsi non linier (Beberapa fungsi non linier, transformasi bentuk linier, langkah-langkah analisis regresi fungsi non linier, analisis aplikasi teknik)
- Perbandingan dua garis regresi linier (Pemeriksaan dua varian garis regresi (Fisher Test), fraktil distribusi rasio varian, pemeriksaan kesejajaran dua garis regresi, fraktil distribusi – t, pemeriksaan kesamaan dua garis sejajar, tes perhitungan untuk data garis regresi gabungan, analisis aplikasi teknik)
- Perbandingan k-garis regresi linier (Pemeriksaan kesamaan k – varian garis regresi (Bartlett Test), fraktil distribusi chi kuadrat, pemeriksaan kesejajaran k – varian garis regresi, fraktil distribusi rasio varian, pemeriksaan ke linieran garis regresi yang melalui k – titik tengah, fraktil distribusi – t, perhitungan untuk data garis regresi gabungan, analisis aplikasi teknik).

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang statistik atau kontrol kualitas produk pada industri rekayasa.

INVESTATION PRICE/PERSON :

Rp. 8.500.000/person (full fare) or
Rp. 8.250.000/person (early bird, payment 1 week before training) or
Rp. 7.950.000/person (if there are 3 persons or more from the same company)

Fasilitas

Modul Training
Flashdisk Training berisi materi training
Sertifikat
ATK: NoteBook dan Ballpoint
T-Shirt
Ransel
Foto Training
Ruang Training dengan fasilitas Full AC dan multimedia
Makan siang dan 2 kali coffeebreak
Instruktur yang Qualified
Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Trainer
SUGENG ISDWIYANUDI, Ir. MT. And Team
was graduated from politeknik universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering.

Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence.

He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibratio , Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Oerator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System. In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system.

In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director asistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

KONTAK CEPAT

Tags

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Production Handling Separation And Measurement

Jadwal Training

Juli 7, 2020

Production Handling Separation And Measurement Tanggal 11 Agust 2020-14 Agust 2020 08 Sep 2020-11 Sep 2020 13 Okt 2020-16 Okt 2020 10 Nop 2020-13 Nop ... Baca Selengkapnya

Production Handling Separation And Measurement

Jadwal Training

Juli 7, 2020

Production Handling Separation And Measurement

Tanggal

11 Agust 2020-14 Agust 2020
08 Sep 2020-11 Sep 2020
13 Okt 2020-16 Okt 2020
10 Nop 2020-13 Nop 2020
08 Des 2020-11 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION : 4 days

LATAR BELAKANG:
Pemindahan bahan merupakan kegiatan dalam proses manufaktur yang meliputi pemindahan, pengepakan, dan penyimpanan dari barang atau benda dengan segala bentuknya (gas, cair, padat) yang dilaksanakan dari satu lokasi ke lokasi yang lain baik secara vertikal, horizontal, maupun lintasan yang membentuk kurva. Umumnya dalam proses manufaktur lebih baik bahan yang yang bergerak dari pada orang atau mesin yang berpindah. Signifikasi biaya dari kegiatan pemindahan bahan tidak bisa diabaikan, karena memerlukan biaya berkisar 25 % dari total biaya produksi, sehingga sistem pemindahan bahan memegang peranan yang sangat penting dalam perencanaan tata letak pabrik. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Material Handling.

PESERTA:
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang pemindahan bahan pada industri rekayasa.

OUTPUT TRAINING:
Pemahaman tentang pengetahuan perencanaan aliran pemindahan bahan dan pemindahan bahan.

CAKUPAN MATERI TRAINING:

Aliran pemindahan bahan
Klasifikasi aliran bahan, pola aliran bahan untuk proses produksi dan proses perakitan, analisis teknik perencanaan aliran bahan (string diagram, assembly chart, from to chart).
Beberapa definisi pemindahan bahan
Material handling, transport, transfer, bulk material, packaged material, unit load, rehandle.
Aturan dasar perancangan pemindahan bahan.
Dasar pemilihan metoda pemindahan bahan.
Plant factors, method factors, product & materials, present handling method, proposed handling method, cost data & economic analysis
Peralatan pemindahan bahan
Fixed path handling equipment, limited area handling equipment, mobile materials handling equipment, material handling tool and storage equipment.
Jalan lintasan
Fungsi jalan lintasan, permasalahan penentuan jalan lintasan, standar lebar jalan lintasan.

INVESTATION PRICE/PERSON :

Rp 7.950.000/person (full fare) or
Rp 7.750.000/person (early bird, payment 1 week before training) or
Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

Training Module
Flash Disk contains training material
Certificate
Stationeries: NoteBook and Ballpoint
T-Shirt
Backpack
Training Photo
Training room with full AC facilities and multimedia
Lunch and twice coffeebreak everyday of training
Qualified instructor
Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.:

Pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.

In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

KONTAK CEPAT

Tags

Advanced Reliability Performance and Hidden Failure Supporting, Alignment, and Coordination, and Vibration, Balancing, BASIC MECHANICAL, Effective Production Management, Effective Shutdown Maintenance, Electro Pneumatic and Hydraulic, Heavy Equipment Maintenance, Heavy Equipment Maintenance Management, Implementation RCM and RBI in Industries, Info Training, Informasi Seminar, Informasi Training, Integrated Maintenance Management and Control, Integrated Material Management, Jadwal Pelatihan, jadwal pelatihan jakarta, Jadwal Pelatihan Production Handling Separation And Measurement, Jadwal Pelatihan Terbaru, Jadwal Seminar, Jadwal Seminar Jakarta, Jadwal Training, Maintenance Equipment Management for Mining, Maintenance Management (Preventive and Predictive Maintenance), maintenance planning, Management Inventory Control, Material technique, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Oil Analysis, online learning, online seminar, Operation and Maintenance Boiler, Operation and Maintenance Centrifugal Pump, Operation and Maintenance Diesel Engine, Operation and Maintenance Pump and Compressor, Operator Routine Daily Checklist and Driven Reliability, Pelatihan Production Handling, PLANT LIFE MANAGEMENT THROUGH RELIABILITY BASED INSPECTION, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Production Handling Separation, Production Handling Separation And Measurement, Promo Jadwal Seminar, Reliability Centered Maintenance, Reliability-Centered Maintenance (RCM), Rotating Equipment Alignment and Vibration, Rotating Equipment: Operation and Maintenance, scheduling, Strength of Material, TOTAL PRODUCTIVE MAINTENANCE (TPM), Training Production Handling Separation And Measurement

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Lubrication and Bearing Technology (BANDUNG)

Jadwal Training

Juni 30, 2020

Lubrication and Bearing Technology (BANDUNG) Tanggal 25 Agust 2020-28 Agust 2020 01 Sep 2020-04 Sep 2020 27 Okt 2020-30 Okt 2020 24 Nop 2020-27 Nop ... Baca Selengkapnya

Lubrication and Bearing Technology (BANDUNG)

Jadwal Training

Juni 30, 2020

Lubrication and Bearing Technology (BANDUNG)

Tanggal
25 Agust 2020-28 Agust 2020
01 Sep 2020-04 Sep 2020
27 Okt 2020-30 Okt 2020
24 Nop 2020-27 Nop 2020
01 Des 2020-04 Des 2020

Duration
4 Days

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INVESTATION PRICE/PERSON :

Rp. 8.750.000/person (full fare) or
Rp. 8.500.000/person (early bird, payment 1 week before training) or
Rp. 8.250.000/person (if there are 3 persons or more from the same company)

LATAR BELAKANG :
Bearing adalah komponen mesin yang mendukung dan memposisikan rotor mesin yang bersangkutan pada posisi yang benar. Didukung dengan pelumasan yang tepat, maka

Rotor berputar dengan alignment yang benar
Mesin terbebas dari vibrasi yang berlebihan
Rotor dan stator terhindar dari gesekan yang berlebihan sehingga pasokan daya masih dalam rentang yang wajar
Rotor dan stator terhindar dari keausan yang berlebihan

Dengan kondisi tersebut di atas maka peluang terjadinya kegagalan operasi dapat diperkecil.

TUJUAN TRAINING :
Setelah Pelatihan para peserta diharapkan akan lebih :

Memahami parameter-parameter serta pengaruhnya dalam operasi roller bearing dan pelumas (lubricant)
Memahami cara-cara melakukan operasi dan perawatan roller bearing yang tepat
Memahami faktor-faktor penyebab kemerosotan pelumas
Mampu mencari penyebab kegagalan dan cara penanganannya

CAKUPAN MATERI TRAINING :

Penggolongan, komponen dan aplikasi bearing
Gesekan pada bearing
Parameter penentu umur bearing: kemampuan dukung, umur dan temperature
Jenis-jenis kerusakan bearing
Suaian pemasangnan bearing
Jenis-jenis pelumasan
Sifat-sifat pelumas (lubricant properties)
Penggantian pelumas (relubrication and regreasing)
Bearing troubleshooting: kegagalan, penyebab kegagalan dan penanganan
Analisis kemerosotan pelumas
Diskusi
Studi kasus

FACILITIES FOR PARTICIPANTS:

Training Module
Flash Disk contains training material
Certificate
Stationeries: NoteBook and Ballpoint
T-Shirt
Bag
Training Photo
Training room with Full AC facilities and multimedia
Lunch and twice coffeebreak every day of training
Qualified Instructor
Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

Trainer
Pawito Merto Sontowiro, Ir. M.Sc.
Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti bidang Coal Energy , Argonne, Chicago, Ill., USA, bidang Combustion, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy.. Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training untuk banyak perusahaan di Indonesia seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC SES LTD, PLTGU BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain. Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

KONTAK CEPAT

Tags

BEARING LUBRICATION TECHNOLOGY, bearing technology, Info Training, Informasi Seminar, Informasi Training, Jadwal Pelatihan, jadwal pelatihan jakarta, Jadwal Pelatihan Terbaru, Jadwal Seminar, Jadwal Seminar Jakarta, Jadwal Training, Lubrication and Bearing Technology, Lubrication Technology, online learning, online seminar, Promo Jadwal Seminar, training hr

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Piping & Pipeline System : Design, Specification, Installation & Maintenance (BANDUNG)

Jadwal Training

Juni 26, 2020

Piping & Pipeline System : Design, Specification, Installation & Maintenance (BANDUNG) Tanggal 13 Jul 2020-16 Jul 2020 03 Agust 2020-06 Agust 2020 14 Sep 2020-17 ... Baca Selengkapnya

Piping & Pipeline System : Design, Specification, Installation & Maintenance (BANDUNG)

Jadwal Training

Juni 26, 2020

Piping & Pipeline System : Design, Specification, Installation & Maintenance (BANDUNG)

Tanggal

13 Jul 2020-16 Jul 2020
03 Agust 2020-06 Agust 2020
14 Sep 2020-17 Sep 2020
05 Okt 2020-08 Okt 2020
02 Nop 2020-05 Nop 2020
14 Des 2020-17 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

OBJECTIVE :
After completion of training, participants will :

Having knowledges more expanded in Piping and pipeline.
Understanding parameters which determining of design.
Be able to do material selection
Understanding the fabrication ways of components and testing.
Be able to handle critical problems related to piping and pipeline

WHO SHOULD ATTEND THIS TRAINING?

Piping and Pipeline Engineers
Operation Engineers
Maintenance Engineers
Production Engineers
Technical Supports Engineers
Technical Staffs
Everyone who want to know and have interest in piping and pipeline system

TRAINING MATERIAL OUTLINE :
A. Piping Design

Design Concept of Pipeline based on ASME B31.1 and ASME B31.3
Line Pipe Material Selection
Piping Fabricationa and Inspection
Mechanics of Fluids / Hydraulics Calculation and Piping Diameter Selection
Internal Pressure, Stress Analysis and Piping Thickness Determination
Plastic Deformation Analysis
Thermal Expansion Analysis
Vibration and Fatigue Analysis of the Piping
Piping Isometric, PFD and P&ID Basic Concept

B. Pipeline Design

Design Concept of Pipeline based on ASME B31.4 and ASME B31.4
Line Pipe Material Selection
Pipeline Fabricationa and Inspection
Gas and Oil Hydraulics Calculation and Pipeline Diameter Selection
Internal Pressure, Stress Analysis and Pipeline Thickness Determination
Plastic Deformation Anallysis
Thermal Expansion Analysis
Free Span Analysis
Vibration and Fatigue Analysis of the Pipeline
Coating and Cathodic Protection Design

C. Piping and Pipeline Components

Valves Criteria and Sizing Selections
Flanges and Elbow
Connector, Supports and Other Junctions
Piping Insulator and Coating Selection
Metering and Instrumentation System

INVESTATION PRICE/ PERSON :

Rp. 8.750.000/peserta (bayar penuh) atau
Rp. 8.500.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
Rp. 8.250.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

Training Module
Training CD contains training material
Certificate
Stationeries: NoteBook and Ballpoint
Jacket or waistcoat or T-Shirt
Bag or backpackers
Training Photo
Training room with full AC facilities and multimedia
Once lunch and twice coffeebreak every day of training
Qualified instructor
Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Dr. Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager, at PT. MMS, PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.

KONTAK CEPAT

Tags

ASME B31.1, ASME B31.3, ASME B31.4, Coating and Cathodic Protection Design, Free Span Analysis, Gas and Oil Hydraulics Calculation and Pipeline Diameter Selection, HRD training, Info Training, Informasi Seminar, Informasi Training, Jadwal Pelatihan, jadwal pelatihan bandung, jadwal pelatihan jakarta, Jadwal Pelatihan Piping & Pipeline System, Jadwal Pelatihan Terbaru, Jadwal Pelatihan Training, jadwal pelatihan yogyakarta, Jadwal Seminar, jadwal seminar bandung, Jadwal Seminar Jakarta, jadwal seminar yogyakarta, Jadwal Training, Jadwal Training Bandung Engineering, jadwal training luar kota, Jadwal Training Piping & Pipeline System, Line Pipe Material Selection, Manajemen Training, materi pelatihan, materi training, Materi Training Sistem Piping dan Pipeline, operation engineers, Pelatihan Sistem Piping dan Pipeline, Pembicara Engineering Piping, Piping & Pipeline System, Piping and Pipeline Engineers, Piping Design, Piping Insulator and Coating Selection, piping pipeline, Promo Jadwal Seminar, silabus pelatihan, silabus workshop, Sistem Piping dan Pipeline, Thermal Expansion Analysis

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Flow Assurance In Piping Systems (BANDUNG)

Jadwal Training

Juni 26, 2020

Flow Assurance In Piping Systems (BANDUNG) Tanggal 13 Jul 2020-16 Jul 2020 18 Agust 2020-21 Agust 2020 14 Sep 2020-17 Sep 2020 19 Okt 2020-22 ... Baca Selengkapnya

Flow Assurance In Piping Systems (BANDUNG)

Jadwal Training

Juni 26, 2020

Flow Assurance In Piping Systems (BANDUNG)

Tanggal

13 Jul 2020-16 Jul 2020
18 Agust 2020-21 Agust 2020
14 Sep 2020-17 Sep 2020
19 Okt 2020-22 Okt 2020
16 Nop 2020-19 Nop 2020
14 Des 2020-17 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION : 4 days

TRAINING INTRODUCTION:
Flow assurance refers to ensuring successful and economical flow of hydrocarbon stream from reservoir to the point of sale. Flow assurance involves effectively handling many solid deposits, such as, gas hydrates, asphaltene, wax, scale, and naphthenates. In addition, it covers network modeling and transient multiphase. Flow assurance is most critical task during deep water energy production because of the high pressures and low temperature (~4 degree Celsius) involved. The financial loss from production interruption or asset damage due to flow assurance mishap can be astronomical. What compounds the flow assurance task even further is that these solid deposits can interact with each other and can cause catastrophic blockage formation in pipelines and result in flow assurance failure.

TRAINING OBJECTIVES:

Understand flow assurance
Know flow assurance concepts
Understand flow assurance factors
Know flow tube
Know Flowline
Know control systems
Know Code and Guidelines
Understand Integrity management

TRAINING MATERIAL OUTLINE:

System Engineering
Hydraulics
Hydraulics Emulsion
Hydraulics Phase Behaviour
Hydrocarbon Flow
Slugging and Liquid Handling
Pressure Surge
Line Sizing
Design Code and Guidelines
VIV and Wave Fatique
Steel Tube
Control Systems
Flowline
Hydrates, Waxes and Asphaltenes
Integrity Managements of Flexibles

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:
a. Study Case

INVESTATION PRICE/PERSON :

Rp 8.750.000/person (full fare) or
Rp 8.500.000/person (early bird, payment 1 week before training) or
Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

Training Module
Flashdisk contain training material
Certificate
NoteBook and Ballpoint
T-Shirt
Backpack
Training Foto
Training room with full ac facilities and multimedia
Lunch and twice coffee break everyday of training
Qualified Instructor
Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia. He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung. He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

KONTAK CEPAT

Tags

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Corrosion And Scaling Prevention (BANDUNG)

Jadwal Training

Juni 23, 2020

Corrosion And Scaling Prevention (BANDUNG) Tanggal 06 Jul 2020-09 Jul 2020 03 Agust 2020-06 Agust 2020 07 Sep 2020-10 Sep 2020 05 Okt 2020-08 Okt ... Baca Selengkapnya

Corrosion And Scaling Prevention (BANDUNG)

Jadwal Training

Juni 23, 2020

Corrosion And Scaling Prevention (BANDUNG)

Tanggal

06 Jul 2020-09 Jul 2020
03 Agust 2020-06 Agust 2020
07 Sep 2020-10 Sep 2020
05 Okt 2020-08 Okt 2020
02 Nop 2020-05 Nop 2020
07 Des 2020-10 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVES :

By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more detail about corrosion and scaling mechanism, know more how to prevent corrosion and scaling, understand how to select and use chemicals, discuss and consult their specific problems they are about to bring to the class, and share experiences with others.
After completion of this course, participants will understand what corrosion and scaling are and their fantastic devastating potential, why and how they begin, how to detect, predict and monitor their growth, and how to control and prevent these big and serious problems. Participants will know whether or not corrosion and scaling happen in particular oil & gas field and what to do to anticipate the risks.
This course is designed as an effective practical shortcut to understand oil & gas field corrosion and scaling prevention, for either corrosion engineers or non corrosion engineering personnel who involve in oil & gas operations and maintenance, pipeline and asset integrity management, pipeline inspection and pigging, material purchasing, chemical selection and injection, produced water handling, hazard and HSE management, and any corrosion and scaling prevention related business activity.
The course content and approach are designed to suit participants of different background and different position in the company. It will be delivered as a to-the-point explanation by a professional instructor, utilizing an easy-to-understand examples and illustrations, especially the actual findings in Indonesia.

TRAINING HIGHLIGHTS :

Reservoir and Wellhead Downstream Fluid Characteristics
Down Hole and Wellhead Pressure and Temperature
H2S, CO2, and Acidic Impurities Components
Sour Corrosion and Microbial Induced Corrosion
Equipment and Pipeline Leakage and Rupture by Corrosion
Fluid Properties and the Scaling Tendency
Equipment and Pipeline Plugging by Scaling
Corrosion Monitoring and Scale Prediction
Corrosion Control and Scale Prevention Methods

TRAINING MATERIAL OUTLINE :

Oil, condensate, gas, and water in reservoir
Reservoir fluid and the hydrocarbon PVT diagram
Down hole to wellhead pressure and temperature change
Corrosion and scale in tubing and wellhead downstream
Corrosion and scale in produced water re-injection system and the injection well
Corrosion and scale in sea water injection system
Characteristics of produced water and the ionic balance
The role of H2S, CO2, and acidic impurities in the surface fluid
Nature of H2S corrosion, pitting and stress corrosion cracking
Nature of CO2 corrosion and calcium carbonate scaling
Calcium, barium and strontium scales problems
Carbonate, sulfate, and silicate scales problems
Sour corrosion and top of line corrosion problems
Microbial induced corrosion mechanism and its related problems
Corrosion caused by SRB and the pitting mechanism
Corrosion caused by oxygen penetration
Examples of corrosion damage and pipeline leakage
Examples of scale problems and pipeline plugging
Calculation of ionic balance, and corrosion and scaling indexes
Prediction of corrosion and scale tendency
Corrosion monitoring methods in oil & gas field
Scale monitoring methods in oil & gas field
Oil & gas filed corrosion and scaling prevention methods
Corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals
Dosage and injection methods of corrosion inhibitors
Scale control with inhibitors and the selection of suitable scale inhibiting chemicals
Dosage and injection methods of scale inhibitors
SRB control with biocides and the selection of suitable and low risk biocide formula
Dosage and injection methods of biocides
Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger
Dosage and injection methods of oxygen scavenger
Safety in oil & gas corrosion and scaling prevention
Case studies in tubing and wellhead downstream
Case studies in produced water re-injection
Case studies in sea water injection system

INVESTATION PRICE/PERSON :

Rp 8.950.000/person (full fare) or
Rp 8.750.000/person (early bird, payment 1 week before training) or
Rp 8.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Bag
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

KONTAK CEPAT

Tags

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Dehydration And Glycol Regeneration (BANDUNG)

Jadwal Training

Juni 18, 2020

Gas Dehydration And Glycol Regeneration (BANDUNG) INTRODUCTION : The natural gas industry has recognized that dehydration is necessary to ensure smooth operation of gas transmission ... Baca Selengkapnya

Gas Dehydration And Glycol Regeneration (BANDUNG)

Jadwal Training

Juni 18, 2020

Gas Dehydration And Glycol Regeneration (BANDUNG)

INTRODUCTION :
The natural gas industry has recognized that dehydration is necessary to ensure smooth operation of gas transmission lines. Dehydration prevents the formation of gas hydrates and reduces corrosion. Unless gases are dehydrated, liquid water may condense in pipelines and accumulate at low points along the line, reducing its flow capacity. Therefore, the removal of the water that is associated with natural gases in vapor form is one critical step in gas processing scheme. Several methods have been developed to dehydrate gases on an industrial scale. The three major methods are: direct cooling, adsorption and absorption. Glycol and methanol injection, glycol dehydration contactor, and glycol regeneration are important issues in gas production operations.

TRAINING MATERIAL OUTLINE :

Overview of the Production of Transportable and Salable Gas
Legal and Safety Requirements in Gas Fuel Market
Reservoir Fluid Type and the Hydrocarbon PVT Diagram
Prevention of Hydrate Formation and the Dehydration Processes
Hydrate Inhibitor and the Methanol and Glycol Injection
Injection System and the Low Temperature Separation
Dehydration in Contactor Column and Glycol Regeneration
Contactor and Regenerator Plant Operation and Controls
Glycol Conditioning and Glycol Losses Control
Plant Maintenance and Troubleshooting

INSTRUCTOR : Ir.Hilman Ahmad,DCE.and Associates

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION : 4 days

TRAINING TIME :

21 Jul 2020-24 Jul 2020
18 Agust 2020-21 Agust 2020
22 Sep 2020-25 Sep 2020
20 Okt 2020-23 Okt 2020
17 Nop 2020-20 Nop 2020
21 Des 2020-24 Des 2020

INVESTMENT PRICE/PERSON:

Rp 8.950.000/person (full fare) or
Rp 8.750.000/person (early bird, payment 1 week before training) or
Rp 8.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

Training Module
Flash Disk contains training material
Certificate
Stationeries: NoteBook and Ballpoint
T-Shirt
Backpack
Training Photo
Training room with full AC facilities and multimedia
Lunch and twice coffeebreak everyday of training
Qualified instructor
Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. Hilman Ahmad, DCE, an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

KONTAK CEPAT

Tags

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Steam Turbine: Operation, Maintenance And Troubleshooting (Bandung)

Jadwal Training

Mei 7, 2020

Steam Turbine: Operation, Maintenance And Troubleshooting (Bandung) Tanggal 08 Jun 2020-11 Jun 2020 30 Jun 2020-03 Jul 2020 10 Agust 2020-13 Agust 2020 01 Sep ... Baca Selengkapnya

Steam Turbine: Operation, Maintenance And Troubleshooting (Bandung)

Jadwal Training

Mei 7, 2020

Steam Turbine: Operation, Maintenance And Troubleshooting (Bandung)

Tanggal
08 Jun 2020-11 Jun 2020
30 Jun 2020-03 Jul 2020
10 Agust 2020-13 Agust 2020
01 Sep 2020-04 Sep 2020
12 Okt 2020-15 Okt 2020
09 Nop 2020-12 Nop 2020
01 Des 2020-04 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION : 4 days

SASARAN TRAINING :
Menambah wawasan para peserta dalam memahami turbin secara integralistik sehingga para peserta akan :

Dapat memahami saling keterkaitan antara komponen komponen alat pada turbin.
Dapat mengantisipasi akibat yang mungkin terjadi dengan adanya perubahan perubahan yang sengaja atau tidak sengaja dilakukan terkait dengan turbin.
Mampu mengembangkan diri dalam memahami turbin uap secara baik sehingga dapat memikul tanggung jawab di lapangan kerja.

CAKUPAN MATERI TRAINING :
1.   Tingkat keadaan termodinamika uap.
2.   Komponen utama turbin uap, fungsi dan prinsip kerjanya.
3.   Komponen-komponen pembantu, fungsi dan prinsip kerjanya.
4.   Pembangkitan daya.
5.   Parameter operasi turbin uap.
6.   Kendala-kendala operasi.
7.   Operasi :
a.   start-up dan shut-down.
b.   kegagalan operasi (trouble-shooting) : gejala, sebab dan tindakan.
8.   Kerugian pada turbin
9.   Prestasi turbin uap
10.   Pengontrolan turbin
11.   Pelumasan turbin.
12.   Kecepatan putar kritis.
13.   Instalasi turbin dan sistem turbin.
14.   Kemerosotan turbin uap.
15.   Perawatan : routine, terjadwal, break-down.
16.   Troubleshooting.
17.   Material.
18.   Studi kasus.
19.   Diskusi.

INVESTATION PRICE/PERSON :

Rp. 8.750.000/person (full fare) or
Rp. 8.500.000/person (early bird, payment 1 week before training) or
Rp. 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:
1.   Training Module
2.   Flash Disk contains training material
3.   Certificate
4.   Stationeries: NoteBook and Ballpoint
5.   T-Shirt
6.   Backpack
7.   Training Photo
8.   Training room with Full AC facilities and multimedia
9.   Lunch and twice coffeebreak every day of training
10.   Qualified Instructor
11.   Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Pawito Merto Sontowiro, Msc adalah alumnus Teknik Mesin ITB dan sejak tahun 1973 menjadi dosen di jurusan tersebut sampai sekarang. Beliau adalah kepala Laboratorium Energi termal Teknik Mesin Institut Teknologi Bandung, Beliau juga pernah menjabat sebagai ketua jurusan Teknik Mesin ITENAS Bandung, Pernah mengajar di SESKOAD, Pernah mengajar di prokerma depnaker-ITB, prokerma PLN-ITB. Beliau juga pernah memperdalam keilmuan di luar negeri seperti bidang Coal Energy , Argonne, Chicago, Ill., USA, bidang Combustion, Petc, Pittsburgh, Pa, USA dan Pinch Technology, Asian-Australia Energy Cooperation. Bidang spesialisasi Beliau adalah Boiler, Turbin Uap/Gas, Pompa, Kompresor, Konversi Energi dan analisis energy.. Pernah mengerjakan projek pada bidang Modifikasi Sistem Pembakaran Lokomotip D-52, Modifikasi Sistem Penunjang Boiler, Analisis Sistem Boiler, dan lain-lain. Beliau adalah trainer produktif, pernah mengajar training untuk banyak perusahaan di Indonesia seperti Chevron Indonesia Company, Chevron pacific Indonesia, Total E&P Indonesie, PT. Pusri, PT. Pupuk Kaltim, PT. BADAK, Depnaker RI, PT. KKA Aceh, KDTP I Bontang, UP-IV PERTAMINA, Kalimantan Prima Coal (KPC), PLN, PT. PERTAMINA, DIKTI, BPPT, PT. Indonesia Power, Pertamina UP II, PT. Pupuk Kujang, PT. Petroleum Consolindo, PT. Indah Kiat Pulp and Paper, PT. Krakatau Steel, PLTU Paiton, PLTU Suralaya, PT. Kaltim Pasifik Amoniak, CNOOC SES LTD, PLTGU BEKASI POWER, PT. INDO FUJI ENGINEERING, PT. CONOCO PHILLIPS, dan lain-lain. Pak Pawito juga aktif menulis buku seperti Perpindahan Kalor, Konversi Energi, Thermodinamika, Pembangkit Uap, Bahan Bakar Dan Pelumas, dan Pompa. Beliau telah melakukan banyak penelitian disertai publikasi ilmiahnya.

KONTAK CEPAT

Tags

jadwal pelatihan bandung, jadwal seminar bandung, Jadwal Training Steam Turbine, komponen turbin, Maintenance and Troubleshooting, Pelatihan Steam Turbine, Pembangkitan daya, Steam Turbine, STEAM TURBINE : OPERATION, termodinamika uap, training Engineering, Training Steam Turbine

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Analisis Vibrasi (BANDUNG)

Jadwal Training

Mei 7, 2020

Analisis Vibrasi (BANDUNG) PENGANTAR: Walaupun kondisi mesin dapat diketahui dengan berbagai teknik analisis seperti: emisi, akustik, analisis pelumas, analisis partikel, pemantauan korosi, termografi, dan pemantauan ... Baca Selengkapnya

Analisis Vibrasi (BANDUNG)

Jadwal Training

Mei 7, 2020

Analisis Vibrasi (BANDUNG)

PENGANTAR:
Walaupun kondisi mesin dapat diketahui dengan berbagai teknik analisis seperti: emisi, akustik, analisis pelumas, analisis partikel, pemantauan korosi, termografi, dan pemantauan performansi, namun analisis vibrasi merupakan kunci untuk melakukan predictive maintenance. Pada dasarnya, semua yang bergerak menghasilkan vibrasi. Mesin-mesin tertentu akan menghasilkan vibrasi yang khas, kondisi tertentu pada mesin akan menghasilkan jejak vibrasi yang khas pula. Analisis vibrasi sangat bermanfaat untuk perawatan mesin-mesin berputar, seperti: turbin uap dan gas, pompa, motor, kompresor, mesin kertas, rolling mill, mesin perkakas dan gearbox. Selain itu, analisis vibrasi juga digunakan untuk melakukan diagnosis kerusakan mesin. Bahkan teknik ini juga bisa digunakan untuk perwatan mesin-mesin reciprocating.

TUJUAN TRAINING :
Setelah selesai mengikuti training ini, peserta diharapkan akan:

Mengerti dan memahami tentang prinsip diagnosis kerusakan mesin dengan vibrasi.
Mengetahui cara melukakan shaft alignment.

CAKUPAN MATERITRAINING :

Pendahuluan

Berbagai filosofi perawatan mesin
Penggunaan analisis vibrasi dalam perawatan

Dasar-dasar Vibrasi

Apa yang dimaksud vibrasi,
Istilah-istilah: amplitudo, frekuensi, fasa,
Sumber-sumber vibrasi
Vibrasi paksa
Resonansi dan Derajat Kebebasan
Frekuensi Pengoperasian Sistem dan Frekuensi Resonansi
Time domain dan frequency domain

Perolehan, Pengolahan dan Presentasi Data Vibrasi

Alat pengukur
Transducer dan Penggunaannya
Analisis Frekuensi
Analisis Fasa

Diagnosis Kerusakan

Unbalance
Rotor Eksentrik
Poros Bengkok
Misalignment
Kelonggaran Mekanik (Mechanical looseness)
Elemen Gelinding Bantalan
Cacat Pada Roda Gigi
Cacat Sabuk
Masalah Kelistrikan
Vibrasi Akibat Aliran

Shaft Alignment

Metode dial indikator
Metoda laser

Balancing dan Peredaman Resonansi

SIAP SEBAIKNYA MENGIKUTI TARINING? :

Training ini ditujukan untuk :

Bidang maintenance
Bidang rotating machinery.
Bidang reciprocating

INSTRUCTOR :Dr. Ir. Haryadi, MT, and team

VENUE :Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION :4 days

TRAINING TIME :

11 Mei 2020-14 Mei 2020
15 Jun 2020-18 Jun 2020
20 Jul 2020-23 Jul 2020
18 Agust 2020-21 Agust 2020
21 Sep 2020-24 Sep 2020
19 Okt 2020-22 Okt 2020
16 Nop 2020-19 Nop 2020
21 Des 2020-24 Des 2020

INVESTMENT PRICE/PERSON :

Rp. 8.750.000/peserta (bayar penuh) atau
Rp. 8.500.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
Rp. 8.250.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

Training Module
Flashdiskcontain training material
Certificate
NoteBookand Ballpoint
T-Shirt
Backpack
Training Foto
Training room with full ac facilities and multimedia
Lunch and twice coffee break everyday of training
Qualified Instructor
Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Dr. Ir. Haryadi, MT, lulusan doktor dari Jurusan Teknik Mesin ITB tahun 2011, adalah dosen aktif pada Politeknik Negeri Bandung (POLBAN) untuk mata kuliah bidang keahlian : Mekanika Fluida, Termodinamika, Mesin Fluida, Mesin Termal, Perawatan dan Perbaikan, Kontrol Proses, Boiler dan Turbin, Mesin Pendingin, Studi Kelayakan Pembangkit Listrik Tenaga Biogas (PLTBg)

Untuk menunjang kompetensinya beliau tergabung sebagai anggota FBI (Forum Biodiesel Indonesia) dan pernah mengikuti beberapa pelatihan, antara lain:

Analisis Vibasi, 2013
CATIA (CAD, CAM, Analysis), IBM, 2004
CANOE Advanture Program ,CANOE, 2002
Commissioning and Profibus-DP- Programming of Mechatronic System, Adiro, 2000
Dasar automotif, kelistrikan, engine management systems, Fontys, 1999
Mechatronic and Automation Training, Adiro, 1999
Andvanced training in mechatronic and automation, Adiro, 1999
Boiler operator training Depnaker, 1999

Beliau juga tercatat sering kali memberikan pelatihan-pelatihan bagi dunia usaha/ industri seperti : PLTBg Hamparan-Lampung, PT. Indonesia Power, PT. Perusahaan Gas Negara (Persero) Tbk., PT. PERTAMINA EP, Dirjen Minyak Dan Gas BumiProccess Engineer Kem ESDM, BP Migas, PT. PLN, PT. Pertamina Gas, PLTU Suralaya, Pemkab Kepulauan Anambas, PT Cirebon Power, dll.

KONTAK CEPAT

Tags

Agenda Training Analisis Vibrasi, Analisis Vibrasi, Balancing dan Peredaman Resonansi, bandung, Dasar-dasar Vibrasi, Diagnosis Kerusakan, diagnosis kerusakan mesin, info seminar bandung, Info Training, Info Training Analisis Vibrasi, Informasi Seminar, Informasi Seminar Analisis Vibrasi, Informasi Training, Jadwal Pelatihan, Jadwal Pelatihan Analisis Vibrasi, jadwal pelatihan bandung, jadwal pelatihan jakarta, Jadwal Pelatihan Terbaru, jadwal pelatihan yogyakarta, Jadwal Seminar, jadwal seminar bandung, Jadwal Seminar Jakarta, jadwal seminar yogyakarta, Jadwal Training, Materi Training Analisis Vibrasi, pelatihan di bandung, pelatihan Masalah Kelistrikan, Pembicara Inhouse Training Analisis Vibrasi, Pengolahan dan Presentasi Data Vibrasi, Peredaman Resonansi, Promo Jadwal Seminar, training Analisis Vibrasi, tujuan Analisis vibrasi

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Process Control And Instrumentation (BANDUNG)

Jadwal Training

Mei 5, 2020

Process Control And Instrumentation (BANDUNG) Tanggal 08 Jun 2020-11 Jun 2020 29 Jun 2020-02 Jul 2020 10 Agust 2020-13 Agust 2020 31 Agust 2020-03 Sep ... Baca Selengkapnya

Process Control And Instrumentation (BANDUNG)

Jadwal Training

Mei 5, 2020

Process Control And Instrumentation (BANDUNG)

Tanggal
08 Jun 2020-11 Jun 2020
29 Jun 2020-02 Jul 2020
10 Agust 2020-13 Agust 2020
31 Agust 2020-03 Sep 2020
12 Okt 2020-15 Okt 2020
09 Nop 2020-12 Nop 2020
30 Nop 2020-03 Des 2020

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

OBJECTIVES :
To understand the scope and utilization of instrumentation and process control technology applicable to industry

WHO SHOULD ATTEND THIS TRAINING?:

Senior Technicians,
Production Supervisors,
Instrumentation Engineers & Technicians

TRAINING MATERIAL OUTLINE :

Instrumentation Symbols and Nomenclature (P&I Diagram)
Measuring Devices
- Level,
- Pressure
- Flow &
- Temperature
Process Control Principles (Control Objectives)
Feedback Control Loops, Controllers (Control modes & Types)
Control Valves:
- Types,
- Flow Characteristics
- Actuator Types
- Valve Positioners
Process Control Systems:
- Control Cascade,
- Ratio and
- Feedforward Control
Tuning Control:
- P,
- PI,
- PID
Alarm and Shutdown Devices
Lab. Work

TRAINING DURATION : 4 days

INVESTATION PRICE/PERSON :

Rp. 8.750.000/person (full fare) or
Rp. 8.500.000/person (early bird, payment 1 week before training) or
Rp. 8.250.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

Training Module
Flash Disk contains training material
Certificate
Stationeries: NoteBook and Ballpoint
T-Shirt
Backpack
Training Photo
Training room with full AC facilities and multimedia
Lunch and twice coffeebreak everyday of training
Qualified instructor
Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Dr.Ir. Sutanto Hadisupadmo.MT.,IPM is a lecturer at Physics Engineering Bandung Institute of Technology (ITB), and has been as a Head of Laboratory of Industrial Instrumentation at ITB. He is former Director of Instrumentation Center and Technical Services of ITB. His education started at Engineering Physics, Bandung Institute of Technology (ITB-1977), then at Diplome Universite in Energetique, Universite de Prepignan, France (1985), Magister Engineering in Instrumentation and Control (ITB) and Doctor (ITB). He has over 20 years of experience doing training, consulting work in instrumentation, measurement, safety and process control and Mr. Sutanto has trained many training/courses for many companies in Indonesia such as PT. TOTAL Indonesie, Pertamina, PT. Petrokimia Gresik, PT. Badak LNG, PT. Pupuk Iskandar Muda, PT. Pupuk Kaltim, PT. Jaya Ancol and many others. As professional he has handled many projects in Instrumentation Process, Tools Evaluation, Transmitter, General Evaluation of Instrumentation Specification, Commercial Building Power Audit, Maintenance Management Evaluation, etc. To get more advance information and knowledge he has participated in domestic and overseas training, seminar, workshop and conference as participant or speakers.

KONTAK CEPAT

Tags

Info Training, Informasi Seminar, Informasi Training, Jadwal Pelatihan, jadwal pelatihan jakarta, Jadwal Pelatihan Terbaru, Jadwal Seminar, Jadwal Seminar Jakarta, Jadwal Training, Pelatihan Process Control And Instrumentation, pembicara Process Control And Instrumentation, PROCESS CONTROL AND INSTRUMENTATION, Promo Jadwal Seminar, proses control, Training Process Control And Instrumentation

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Natural Gas Processing – Fractination And Refregeration (BANDUNG)

Jadwal Training

Mei 5, 2020

Natural Gas Processing – Fractination And Refregeration (BANDUNG) TRAINING TIME : 15 Jun 2020-18 Jun 020 20 Jul 2020-23 Jul 2020 18 Agust 2020-21 Agust ... Baca Selengkapnya

Natural Gas Processing – Fractination And Refregeration (BANDUNG)

Jadwal Training

Mei 5, 2020

Natural Gas Processing – Fractination And Refregeration (BANDUNG)

TRAINING TIME :
15 Jun 2020-18 Jun 020
20 Jul 2020-23 Jul 2020
18 Agust 2020-21 Agust 2020
21 Sep 2020-24 Sep 2020
19 Okt 2020-22 Okt 2020
16 Nop 2020-19 Nop 2020
21 Des 2020-24 Des 2020

VENUE : Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION : 4 days

INTRODUCTION, GOAL AND OBJECTIVES :
The training material subjects are covered: physical properties, phase equilibria and vapour liquid equilibrium calculations, water-hydrocarbon systems, natural gas gathering and plant inlet separation, acid gas treating/sweetening, dew point control and natural gas liquids recovery. The training is designed primarily for engineers and technologists involved in the design, operation, and optimization of gas processing facilities. This training is designed to familiarize technical professionals with the design and operation of propane refrigeration loops used in typical NGL recovery and/or dewpoint control facilities, with an emphasis on design, troubleshooting and performance optimization. A working knowledge of gas compression is required. The principles of natural gas liquids fractionation and cryogenic expander operation are also discussed, including LNG and LPG operations and power recovery from LNG import terminals.

TRAINING MATERIAL OUTLINE :
Day 1:
Physical Properties

Phase Equilibria and Vapour Liquid Equilibrium Calculations
Natural Gas Gathering and Plant Inlet Separation
Problem Solving Session:
- Oil Characterization
- Gas Gathering
Dew Point Control and Natural Gas Liquids Recovery
Gas Plant Process Dynamics and Control of Critical Loops
Problem Solving Session:
- Refrigerated Gas Plant
- Natural Gas Liquids Fractination
- Gas Plant Dynamics

Day 2:

Water-Hydrocarbon Systems and Natural Gas Dehydration
Acid Gas Treating and Sweetening
Problem Solving Session:
- Natural Gas Dehydration with Glycols
- Acid Gas Sweetening with Amines

Day 3-4:
Fractination and processing

Principles of Distillation
Vapour-Liquid Equilibrium
Mechanics
Characteristics of Good Distillation
Column Design Principles, Including Control Strategies
Case : Methanol Bunyu Process and
Troubleshooting

PARTICIPANTS :

New Engineering graduates and Technologists who need to develop an understanding of Natural Gas Processing Principles and Technology.
Professionals who have been working in industry but are new to Natural Gas Processing.
Professionals who are familiar with Natural Gas Processing but are unfamiliar with how process simulators can be used to improve plant design and optimize plant profitability.

INSTRUCTOR : Ir. Sudiharto, MT. and Team

INVESTATION PRICE/PERSON :

Rp 8.500.000/person (full fare) or
Rp 8.250.000/person (early bird, payment 1 week before training) or
Rp 7.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS:

Training Module
Flash Disk contains training material
Certificate
Stationeries: NoteBook and Ballpoint
T-Shirt
Backpack
Training Photo
Training room with Full AC facilities and multimedia
Lunch and twice coffeebreak every day of training
Qualified Instructor
Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Sudiharto, MT, is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003. Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi, blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :
1.   Electric Submercible Pump, Problem and Trouble Shooting Mecanism
2.   Crude Oil Analysis
3.   Drilling, Production and Workover Strategy
4.   Well Workover and Completion Stretegy
5.   Petroleum Finance, Acconting and Reservoir Management
6.   Plan of Development in Oil and Gas Industries
7.   Pressure Control for Drilling Engineer
8.   Plan of Development (POD) & Authorization For Expenditures (AFE)
9.   Management Skills Secretary Petroleum Gas and Oil Industries
10.   Pressure Transient Analysis and Well Testing Data Interpretation
11.   Oil Production System and Operation
12.   Formation Damaged and Well Stimulation
13.   Simulasi Reservoir for Petroleum Engineer
14.   Oil and gas transportation/measurement, etc

KONTAK CEPAT

Tags

info pelatihan bandung terbaru, Info Training, Informasi Seminar, Informasi Training, Jadwal Pelatihan, jadwal pelatihan jakarta, Jadwal Pelatihan Terbaru, Jadwal Seminar, Jadwal Seminar Jakarta, Jadwal Training, NATURAL GAS PROCESSING, NATURAL GAS PROCESSING - FRACTINATION AND REFREGERATION, Pelatihan Natural Gas Processing, Pembicara Training Natural Gas Processing, Promo Jadwal Seminar, Refregeration, Training Natural Gas Processing

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Basic Electrical For Non Electrician (BANDUNG)

Jadwal Training

Mei 4, 2020

Basic Electrical For Non Electrician (BANDUNG) Tanggal 02 Jun 2020-05 Jun 2020 27 Jul 2020-30 Jul 2020 03 Agust 2020-06 Agust 2020 28 Sep 2020-01 ... Baca Selengkapnya

Basic Electrical For Non Electrician (BANDUNG)

Jadwal Training

Mei 4, 2020

Basic Electrical For Non Electrician (BANDUNG)

Tanggal

02 Jun 2020-05 Jun 2020
27 Jul 2020-30 Jul 2020
03 Agust 2020-06 Agust 2020
28 Sep 2020-01 Okt 2020
05 Okt 2020-08 Okt 2020
02 Nop 2020-05 Nop 2020
28 Des 2020-31 Des 2020

Jam Pelaksanaan
9:00 – 17:00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVES :
Tujuan dari training ini adalah untuk menambah wawasan mengenai konsep dasar sistem kelistrikan. Pelatihan ditekankan pada pemahaman mengenai aspek pemanfaatan energi listrik, penggunaan peralatan-peralatan listrik serta aspek keselamatan dalam pemanfaatan sistem kelistrikan. Dengan demikian setelah mengikuti pelatihan ini peserta akan dapat :

Memahami hukum-hukum Dasar kelistrikan
Memahami mengenai konfigurasi jaringan Tenaga Listrik dari pembangkitan hingga pemanfaatan
Memahami cara melakukan perhitungan biaya penggunaan energi
Memahami prinsip kerja, instalasi dan penggunaan mesin-mesin listrik
Memahami mengenai aspek-aspek keselamatan dalam sistem kelistrikan
Memahami cara memproteksi peralatan listrik

TRAINING MATERIAL OUTLINE :

Basic Electrical Concepts & Definitions
- System overview,
- Elements of Electrical Power System,
- per-unit System
Electrical Cost Calculation & Evaluation
Electrical Distribution Systems
- Electrical Power System Configuration,
- Electrical Distribution Network,
- Distribution Panel
Electrical Machines
- Electrical Motor Fundamental,
- Motor Starting and Braking,
- Motor Protection
Electrical Safety
- Basic Safety Concepts,
- Electrical Hazards,
- Safe Operation
Grounding System
- Purpose of Grounding,,
- Standards (National/IEEE/IEC),
- Grounded vs. Ungrounded,
- Distribution Grounding Electrodes
Overcurrent Protection
- Need for protection,
- Types of fault and Calculation ,
- Over current protection devices characteristics,
- Application to Industrial Electrical Utilities protection
- Application to line protection
Power Quality
- Types of disturbances,
- Harmonics Sources,
- Harmonics Mitigation
Cases Study and Practices
Interactive Discussion

SIAPA SEBAIKNYA MENGHADIRI TRAINING INI?
Pelatihan ini diberikan pada para non-electrical engineer, teknisi, operator maupun supervisor yang bekerja dan bertanggung jawab terhadap pekerjaan bidang ketenaga listrikan di industry, bangunan maupun manufaktur. Dan atau semua pihak yang ingin memahami hal-hal yang terkait dengan kelistrikan.

Pembicara / Fasilitator
Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN) and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences and now he is ready to share his knowledge and experiences to industrial world throught training class.

INVESTATION PRICE/ PERSON :

Rp. 8.750.000/person (full fare) or
Rp. 8.500.000/person (early bird, payment 1 week before training) or
Rp. 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

Training Module
Training CD Contains Training Material
Certificate
Stationeries: NoteBook and Ballpoint
Jacket or Waistcoat or T-Shirt
Bag or Backpackers
Training Photo
Training Room with Full AC Facilities and multimedia
Once lunch and twice coffeebreak every day of training
Qualified instructor
Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

KONTAK CEPAT

Tags

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Basic Petroleum Engineering (BANDUNG)

Jadwal Training

Mei 2, 2020

Basic Petroleum Engineering (BANDUNG) Tanggal 06 Mei 2020-08 Mei 2020 24 Jun 2020-26 Jun 2020 08 Jul 2020-10 Jul 2020 26 Agust 2020-28 Agust 2020 ... Baca Selengkapnya

Basic Petroleum Engineering (BANDUNG)

Jadwal Training

Mei 2, 2020

Basic Petroleum Engineering (BANDUNG)

Tanggal

06 Mei 2020-08 Mei 2020
24 Jun 2020-26 Jun 2020
08 Jul 2020-10 Jul 2020
26 Agust 2020-28 Agust 2020
09 Sep 2020-11 Sep 2020
28 Okt 2020-30 Okt 2020
25 Nop 2020-27 Nop 2020
09 Des 2020-11 Des 2020

Jam Pelaksanaan
08.30-16.30 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

Harga

Rp 8.750.000/person (full fare) or
Rp 8.500.000/person (early bird, payment 1 week before training) or
Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

Training Module
Training CD Contains Training Material
Certificate
Stationeries: NoteBook and Ballpoint
Jacket or Waistcoat or T-Shirt
Bag or Backpackers
Training Photo
Training Room with Full AC Facilities and multimedia
Once lunch and twice coffeebreak every day of training
Qualified and experienced instructor
Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

TRAINING OBJECTIVE :
Setelah menyelesaikan training ini diharapkan peserta dapat :

Memahami prinsip-prinsip dasar eksploitasi minyak, gas bumi yang dikenal sebagai teknologi perminyakan.
Melakukan diagnosis sederhana dan memahami pengelolaan data operasi perminyakan, seperti data geologi produksi, data batuan dan fluida reservoir, data produksi, data operasi pemboran bahkan data analisis keekonomian.
Membuat analisis sederhana terhadap data tersebut dan melakukan pengolahannya dengan mempergunakan metoda standar dalam teknologi perminyakan.
Melakukan perhitungan-perhitungan kuantitatif sederhana dari seluruh data perolehan operasi perminyakan : geologi produksi, evaluasi data formasi produktif, data reservoir, data pemboran, data produksi bahkan data keekonomian.

PRE-REQUISITE :
1. Latar belakang beragam : Operator, Sr. Operator, Engineering dan Non Engineering dan siapa saja yang membutuhkan pemahaman tentang basic petroleum engineering

TRAINING MATERIAL OUTLINE :

Pengertian Tentang Data Teknik Operasi Perminyakan dan Teknik Pengelolaannya
- Data Geologi Produksi
- Data Teknik Reservoir
- Data Teknik Pemboran
- Data Teknik Produksi
- Data Analisis Keekonomian
Reservoir Hidrokarbon
- Kondisi Terbentuknya Reservoir
- Tekanan dan Temperatur Reservoir
- Fluida Reservoir
- Batuan Reservoir
Evaluasi Formasi Reservoir Hidrokarbon
- Penentuan Formasi Permeabel
- Penentuan Porositas Batuan
- Penentuan Saturasi Fluida
- Penentuan ketebalan Reservoir Rata-rata
- Peralatan yang Terkait dengan Pelaksanaan Evaluasi Formasi
Pemboran Sumur Minyak
- Operasi
- Biaya
- Complesion
- Fluida Pemboran
- Data Akuisisi
- Optimasi Pemboran
- Problema Khusus Pemboran
- Peralatan yang Terkait dengan Pelaksanaan Pemboran
Perkiraan Cadangan
- Volume In-place
- Ketebalan Batuan
- Peta Iso Porositas
- Peta iso Kapasitas
- Recovery Factor (Faktor Perolehan)
Cara Produksi Reservoir Minyak Bumi
- Inflow Performance Relationship
- Primary Recovery Technology
- Enhanced Oil Recovery Technology
- Peralatan yang Terkait dengan Fasilitas Produksi di Bawah Permukaan
Fasilitas Produksi di Permukaan
- Field Processing Unit
- Sistem Pemipaan Minyak Bumi
- Peralatan yang Terkait dengan Fasilitas Produksi di Permukaan
Analisa Kinerja Reservoir
- Perolehan Reservoir Gas
- Perolehan Primer Reservoir Minyak
- Efisiensi Perolehan Minyak
- Keseimbangan Materi
- Peramalan Kinerja Produksi
Prinsip-prinsip Dasar Analisis Keekonomian
- Parameter Utama Analisis Keekonomian
- Net Present Value
- Internal Rate of Return
- Pay Out Time
- Profit to Invesment Ratio
- Beberapa Contoh Kasus

KONTAK CEPAT

Tags

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Reliability Centered Maintenance (RCM) BANDUNG

Jadwal Training

Mei 2, 2020

Reliability Centered Maintenance (RCM) BANDUNG Tangga 18 Mei 2020-20 Mei 2020 24 Jun 2020-26 Jun 2020 06 Jul 2020-08 Jul 2020 26 Agust 2020-28 Agust ... Baca Selengkapnya

Reliability Centered Maintenance (RCM) BANDUNG

Jadwal Training

Mei 2, 2020

Reliability Centered Maintenance (RCM) BANDUNG

Tangga

18 Mei 2020-20 Mei 2020
24 Jun 2020-26 Jun 2020
06 Jul 2020-08 Jul 2020
26 Agust 2020-28 Agust 2020
07 Sep 2020-09 Sep 2020
28 Okt 2020-30 Okt 2020
25 Nop 2020-27 Nop 2020
07 Des 2020-09 Des 2020

Jam Pelaksanaan
08:30-16:30 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INVESTATION PRICE/ PERSON :

Rp 6.500.000/person (full fare) or
Rp 6.250.000/person (early bird, payment 1 week before training) or
Rp 5.950.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

Training Module
Training CD Contains Training Material
Certificate
Stationeries: NoteBook and Ballpoint
Jacket or Waistcoat or T-Shirt
Bag or Backpackers
Training Photo
Training Room with Full AC Facilities and multimedia
Once lunch and twice coffeebreak every day of training
Qualified instructor
Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

TRAINING INTRODUCTION :
This course is beneficial especially for continuous process industry and utilizes sophisticate and expensive production equipment, such as: Oil and Gas Industry, Electricity Plant, Petrochemical Plant, Marine Industry, Manufacturing, Automotive, Assembling Industry, Aviation, Construction, Pulp and Paper, Mining, etc. The course is designed by considering the need of maintenance method that reliable to ensure the success of production, a method of maintenance to push downs a break down or unplanned disturbance. The requirement of efficient and effective method of maintenance becomes more important when plant facility is automatic system. The big loss can come, if it is late to improve maintenance operation system, low productivity, wasting working hours, last production, engine big failure, and in-harmony relation with customer, successful.

TRAINING OBJECTIVES :

To understand the Reliability-Centered Maintenance (RCM) as basic of maintenance management implementation or as an aid-tool for cost management and as part of project management.
To understand maintenance philosophy based an the third generation of previous maintenance generation i.e.: first generation (breakdown maintenance) and second generation (preventive maintenance)
To avoid total failure by knowing what kind of failure will happen.
To understand root cause mechanism of failure
To minimize maintenance cost and operate the equipment until maximum capacity
To increase output and improve productivity of existing facility
To get plant equipment, reliable, effective and efficient

TRAINING MATERIAL OUTLINE :
1. What is Reliability-Centered Maintenance (RCM)?

Fundamental change of maintenance philosophy
Maintenance and RCM
Basic idea of RCM
RCM implementation
RCM achievement

2. Plant Registration

What is Plant Registration?
What is equipment?
How to number the asset?
What kind of information has to be registered?
How to compile plant registration?

3. Function and Failure

Function and standard performance
Malfunction
Failure mode
Failure effects
Failure Consequences
Hidden failure consequent
Safety and environment consequent
Operational consequent
Summary

4. Preventive Actions

Engineering feasibility
Life time dependable failure
Scheduled restoration
Scheduled replacement
Life time undependable failure
Scheduled condition monitoring
Selection of preventive actions

5. Defaults Actions

Scheduled efforts to find failure
Non Scheduled maintenance
Re-designing
Lubrication
Zone inspection and walk-around check

6. RCM Decision Diagram

Effort and consequent integration
RCM decision making process
Filling out decision sheet

7. Plan, Organize and Control Proposed Tasks

Task grouping
Planning system and maintenance control
Failure report
Various Failure and its History
Failure process
Six failure patterns
Historical data

8. RCM Implementation

Who knows?
Pre-review RCM group
Facilitator and auditor
Implementation strategy
Short term approach
RCM Forever

9. Build skill in RCM

What is RCM Achievement?
Result of RCM analysis
Benefit of RCM
Why RCM?

10. RCM History

Airline enterprise experience
RCM at other industry

11. Case Study

WHO SHOULD ATTEND THIS TRAINING?

The following selected participants should attend this course:
Maintenance Engineer/ Superintendent/ Supervisor
Rotating Engineer/ Superintendent/Supervisor
Power Plant Engineer/Superintendent /Supervisor
Manufacturing Manager
Everybody who wants to broaden knowledge and interest in this topics

TRAINING INSTRUCTOR
Dr. Ir. Edy Suwondo is a lecturer at the Aerospace Engineering Department, Institute Technology of Bandung (ITB) and a member of the Aircraft Design, Operation and Maintenance Research Group, ITB. He has been working in the area of maintenance since 1992. His expertise is in Reliability Centered Maintenance, Reliability Control Program, Maintenance Planning and Life Cycle Costing. He has conducted various research in those area at GMF AeroAsia, Royal Dutch Airlines (KLM), Nusantara Turbine and Propulsion (PT NTP) and Indonesian Aerospace Company (IAe). He involves also in various projects in his research group. Mr. Edy Suwondo received his bachelor degree from the Aerospace Engineering ITB and his doctor degree from Aerospace Engineering, Delft University of Technology (TU Delft), The Netherlands. His doctor research was in the applications of Life Cycle Costing in maintenance area

KONTAK CEPAT

Tags

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Instrumentation And Control System (BANDUNG)

Instrumentation And Control System (BANDUNG)

Tags

Application Statistic in Engineering Industry (BANDUNG)

Application Statistic in Engineering Industry (BANDUNG)

Tags

Production Handling Separation And Measurement

Production Handling Separation And Measurement

Tags

Lubrication and Bearing Technology (BANDUNG)

Lubrication and Bearing Technology (BANDUNG)

Tags

Piping & Pipeline System : Design, Specification, Installation & Maintenance (BANDUNG)

Piping & Pipeline System : Design, Specification, Installation & Maintenance (BANDUNG)

Tags

Flow Assurance In Piping Systems (BANDUNG)

Flow Assurance In Piping Systems (BANDUNG)

Tags

Corrosion And Scaling Prevention (BANDUNG)

Corrosion And Scaling Prevention (BANDUNG)

Tags

Gas Dehydration And Glycol Regeneration (BANDUNG)

Gas Dehydration And Glycol Regeneration (BANDUNG)

Tags

Steam Turbine: Operation, Maintenance And Troubleshooting (Bandung)

Steam Turbine: Operation, Maintenance And Troubleshooting (Bandung)

Tags

Analisis Vibrasi (BANDUNG)

Analisis Vibrasi (BANDUNG)

Tags

Process Control And Instrumentation (BANDUNG)

Process Control And Instrumentation (BANDUNG)

Tags

Natural Gas Processing – Fractination And Refregeration (BANDUNG)

Natural Gas Processing – Fractination And Refregeration (BANDUNG)

Tags

Basic Electrical For Non Electrician (BANDUNG)

Basic Electrical For Non Electrician (BANDUNG)

Tags

Basic Petroleum Engineering (BANDUNG)

Basic Petroleum Engineering (BANDUNG)

Tags

Reliability Centered Maintenance (RCM) BANDUNG

Reliability Centered Maintenance (RCM) BANDUNG

Tags

Popular Post

TERBARU

LINK

Chat dengan kamiCV INFO SEMINAR0899-8121-246

Chat dengan kami
CV INFO SEMINAR
0899-8121-246