Jadwal Training 2024

Wireless LAN In Industrial Automation & ISA 100.11a

 

Wireless LAN In Industrial Automation & ISA 100.11a

Tanggal

24 Jan 2023-27 Jan 2023
21 Feb 2023-24 Feb 2023
28 Feb 2023-03 Mar 2023
10 Apr 2023-13 Apr 2023
02 May 2023-05 May 2023
19 Jun 2023-22 Jun 2023
25 Jul 2023-28 Jul 2023
01 Aug 2023-04 Aug 2023
26 Sep 2023-29 Sep 2023
24 Oct 2023-27 Oct 2023
31 Oct 2023-03 Nov 2023
18 Dec 2023-21 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION:
Wireless technology has become the most exciting area in telecommunications and networking. The rapid growth of mobile telephone use, various satellite services, and now the wireless Internet and wireless LANs are generating tremendous changes in telecommunications and networking. This course presents the key topics in the field in the following general categories:

  1. Technology and architecture: The course presents a small collection of ingredients that serves to characterize and differentiate wireless communication and networking, including frequency band, signal encoding technique, error correction technique, and network architecture.
  2. Network type: The course covers the important types of wireless networks, including satellite, cellular, fixed wireless access, and wireless LANs.
  3. Design approaches: The course examines alternative design choices and assesses their relative merits.
  4. Applications: A number of key technologies and applications have been developed on top of wireless infrastructures, especially in wireless automation with PLC, SCADA and DCS.

There is an emphasis on both technology and on standards. The book provides a comprehensive guide to understanding specific wireless standards, such as those promulgated by lTD and IEEE 802, as well as standards developed by other organizations. This emphasis reflects the importance of such standards in defining the available products and future research directions in this field.

TRAINING OBJECTIVE:
You will be able to :

  1. Understand the concept of wireless
  2. Identify the requirement for communication
  3. Know the design approach
  4. Use and implement  wireless networking
  5. Integrate the wireless industrial automation

TRAINING MATERIAL OUTLINE:

  1. Introduction to Wireless Automation
  2. Transmission Fundamentals
  3. Communication Networks
  4. Protocols and the TCP/IP Suite
  5. Antennas and Propagation
  6. Signal Encoding Techniques
  7. Spread Spectrum
  8. Coding and Error Control
  9. Wireless Networking
  10. Cordless Systems and Wireless Local Loop
  11. Wireless LAN Technology
  12. Wi-Fi and the IEEE 802.11 Wireless Lan Standard
  13. ISA 100.11a
  14. Access Points and Client Points
  15. Industrial communication protocols
  16. Application in Industrial Automation

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:

  • Practical work using PLC
  • Application using Simulator Kit

TRAINING DURATION :  4 days

INVESTATION PRICE/PERSON :    

  • 1. Rp 8.750.000/person (full fare) or
  • 2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  • 3. Rp 8.250.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flashdisk contain training material
  3. Certificate
  4. NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Foto
  8. Training room with full ac facilities and multimedia
  9. Lunch and twice coffee break everyday of training
  10. Qualified Instructor
  11. Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

TRAINING INSTRUCTOR
Ir. Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.  He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung.

He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung.

He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pneumatic System and Application

 

Pneumatic System and Application

Tanggal

24 Jan 2023-27 Jan 2023
21 Feb 2023-24 Feb 2023
07 Mar 2023-10 Mar 2023
11 Apr 2023-14 Apr 2023
09 May 2023-12 May 2023
19 Jun 2023-22 Jun 2023
25 Jul 2023-28 Jul 2023
29 Aug 2023-01 Sep 2023
26 Sep 2023-29 Sep 2023
24 Oct 2023-27 Oct 2023
07 Nov 2023-10 Nov 2023
18 Dec 2023-21 Dec 2023

TRAINING DURATION
4 hari

Jam Pelaksanaan
08.30 – 16.00 WIB

TEMPAT
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Ir. Aris Suryadi, MT adalah alumnus dari ITB dengan bidang spesialisasi otomasi proses produksi. Beliau menjadi dosen di jurusan mesin Poltek ITB (politeknik Negeri Bandung) sejak tahun 1990. Beliau sudah sering menyampaikan training untuk topik-topik di bidang kompetensinya, diantaranya seperti Motor Management System, Pneumatic & Electro Pneumatic, Programmable Logic Controller (PLC), Hydraulic & Electrohydraulic, Automotif Technology, Mechatronic and Automation, Application Engineering, Automatic Control Technology. Training-training yang disampaikan oleh Pak Aris Suryadi disertai dengan praktikum langsung menggunakan peralatan yang bersesuaian dengan topik trainingnya sehingga peserta training akan merasakan seperti pada kondisi real di lapangan.

HARGA INVESTASI/PESERTA :

1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified and experienced instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TUJUAN TRAINING :
Untuk memberi wawasan industri dalam rekayasa pneumatik sebagai bagian dari teknologi dasar untuk industri, berupa pengetahuan tentang prinsip-prinsip fisika, fungsi dan penggunaan pneumatik. Memberikan pengetahuan mengenai instalasi penyedia tekanan udara. serta pengetahuan komperehensif mengenai perancangan alat serta sistem pneumatik berupa pengembangan kemampuan merancang dan membuat simulasi konstruksi kontrol.

CAKUPAN MATERI TRAINING :

  1. Pembukaan dan Pre Test
  2. Review Mekanika Fluida
    • Fluida kompresibel & Imkompresibel
    • Tekanan
    • Kerugian Tekanan pada aliran (Head losses)
    • Energi dan Daya
  3. Sistem Pneumatik secara umum
    • Perubahan energi pada sistem Pneumatik
    • Kontrol Pneumatik
    • Aktuator
  4. Sistem penyedia tekanan pada Sistem Pneumatik
    • Kompresor
    • Regulator tekanan
    • Filter
    • Pelumas (Lubricator)
    • Pemipaan
  5. Aktuator Pneumatik
    • Jenis dan Prinsip kerja
    • Perhitungan Pemilihan Aktuator
  6. Sistem kontrol Pneumatik
    • Simbol dan fungsi
    • Kontrol aliran (Flow control)
    • Kontrol tekanan (Pressure control)
    • Kontrol arah (Directional control)
  7. Pengontrolan gerakan dasar
    • Pengontrolan Arah, Kecepatan & Pembebanan
  8. Metode pengontrolan gerakan 1 (Sequential)
    • Metode Intuitif
    • Metode Set-Reset
    • Metode Latching
  9. Metode pengontrolan gerakan 2 (Conditional)
    • Logik Dasar
    • Metode Logik
  10. Kontrol Panel
    • Start, stop, manu/auto, Emergency Control
  11. Pewaktu Pneumatik (Pneumatic Timer)
  12. Latihan Penerapan (Praktek) 1
  13. Latihan Penerapan (Praktek) 2
  14. Perawatan dan Trouble shooting
  15. Post Test dan Penutupan

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Engineering Material Knowledge For Warehouse People (BANDUNG)

 

Engineering Material Knowledge For Warehouse People (BANDUNG)

Tanggal

  • 16 Jan 2023-18 Jan 2023
  • 13 Feb 2023-15 Feb 2023
  • 20 Mar 2023-22 Mar 2023
  • 03 Apr 2023-05 Apr 2023
  • 22 May 2023-24 May 2023
  • 19 Jun 2023-21 Jun 2023
  • 17 Jul 2023-19 Jul 2023
  • 14 Aug 2023-16 Aug 2023
  • 18 Sep 2023-20 Sep 2023
  • 16 Oct 2023-18 Oct 2023
  • 20 Nov 2023-22 Nov 2023
  • 18 Dec 2023-20 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVES :
To introduce the participants to standard classification and specification of various materials commonly used in the oil and gas industry and to improve their knowledge on the use of those materials in the field.

TRAINING MATERIAL OUTLINE :

  1. Classification of material : Ferrous and non ferrous metal, ceramic, plastic and rubber in bars, plate sheets and wire products
  2. Material standard and specification
  3. Physical, mechanical, chemical and technologycal  properties of materials
  4. Process manufactur of material
  5. Degradation engineering material
  6. Corrosion engineering materials
  7. Bearing, shaft seal, belt, roller chain, Fasteners
  8. Wire ropes, cordage and tackles
  9. Valves and Cocks, Fitting & Flanges, Hoses, Packing and Gaskets

WHO SHOULD ATTEND THIS TRAINING?:
Those who work in the logistics / materials department i.e. purchasing warehousing, inventory control specially those who actually handle the materials receiving and storage or everyone who want to know about this topic.

TRAINING DURATION :  3 hari

INVESTATION PRICE/PERSON : 

  • Rp. 6.500.000/peserta (bayar penuh) atau
  • Rp. 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp. 5.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training Module
  3. Flash Disk contains training material
  4. Certificate
  5. Stationeries: NoteBook and Ballpoint
  6. T-Shirt
  7. Bag
  8. Training Photo
  9. Training room with Full AC facilities and multimedia
  10. Lunch and twice coffeebreak every day of training
  11. Qualified Instructor
  12. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

TRAINING INSTRUCTOR
Ir. Djoko Hadi Prajitno, MSME. was graduated from Mining Metallurgy Bandung Institute of Technology (ITB) and Material Engineering UNSW Australia. He is as expert in Metallurgy/materials engineer at Metallurgy Laboratory Pusat Teknologi Nuklir Bahan dan Radiometri (PTNBR) Badan tenaga nuklir nasional (BATAN) Bandung. He is also lecturer at University of Jenderal Achmad Yani Bandung and lecturer at ITENAS (Institut teknologi nasional) Bandung. In campus he teachs material engineering, corrosion, advanced material, coating and metallurgy. He has researched some topics related to his expertise such as

  1. Research and development metal alloy with zirconium matrix
  2. Research and development coating of metal alloy inconel with aluminate in collaboration with mining engineering ITB
  3. Production and development of compound alloy between nikel-aluminida metals in collaboration with mechanical engineering ITB
  4. Coating of nikel aluminida at inconel alloy with spray Coating in collaboation with mechanical engineering ITB
  5. Research on Coating
  6. Research for production of material for stater drive Hercules airoplane in collaboration with DISLITBANG TNI AU
  7. Welding research of dissimilar metal
  8. And others

He frequently teachs training class for participants from many Indonesian companies. he has experience and knowledge about materials and skill that can be beneficial for warehouse people. He is member or has experience at some organizations such as HFI, Indonesian Corrosion Association, LSP AKN, Indosian Petroleum Association, National America Corrosion Engineer . Related to his expertise, he has much field experiences.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Machinery Condition Monitoring For Predictive And Preventive Maintenance

 

Machinery Condition Monitoring For Predictive And Preventive Maintenance

Tanggal    
16 Jan 2023-19 Jan 2023
13 Feb 2023-16 Feb 2023
27 Feb 2023-02 Mar 2023
04 Apr 2023-07 Apr 2023
01 May 2023-04 May 2023
20 Jun 2023-23 Jun 2023
17 Jul 2023-20 Jul 2023
28 Aug 2023-31 Aug 2023
18 Sep 2023-21 Sep 2023
16 Oct 2023-19 Oct 2023
30 Oct 2023-02 Nov 2023
19 Dec 2023-22 Dec 2023

MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

TRAINING OBJECTIVES:
1. Peserta dapat memahami teknik monitoring kondisi mesin
2. Peserta dapat memilih teknik monitoring kondisi mesin
3. Peserta dapat melakukan monitoring kondisi mesin

TRAINING MATERIAL OUTLINE:
1. Teknik dan strategi perawatan
2. Dasar perawatan berkala
3. Dasar perawatan prediktif
4. Bathub curve
5. Pemilihan teknik monitoring kondisi mesin
6. Inspeksi / monitoring visual
7. Pemakaian pelumas
8. Kontaminan pelumas
9. Inspeksi / Monitoring dan analisis pelumas
10. Inspeksi / monitoring dan analisis getaran
11. Analisis spectrum getaran
12. Inspeksi dan monitoring geometris
13. Analisis levelling, run out dan misalignment
14. Alignment poros
15. Penggunaan tools: Alat ukur getaran(Vibrotest 60), software Vibroexpert, Straight gauge, Dial indicator, Laser Alignment, Viscometer, Inspection Sheet

WHO SHOULD ATTEND THIS TRAINING?:
1. Electrical & Mechanical Engineer / Supervisor
2. Instrument Engineer / Supervisor
3. Professionals
4. Plant Maintenance / Operators / Supervisor / Superintendent

INSTRUCTOR : Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION : 4 days

INVESTMENT PRICE/PERSON :
1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Civil Construction : Pengawasan Pelaksanaan Bangunan

 

Civil Construction : Pengawasan Pelaksanaan Bangunan

TRAINING MATERIAL OUTLINE:

  1. Spesifikasi / Persyaratan teknis
    1. Konstruksi baja
    2. Konstruksi beton
  2. Mengidentifikasi jenis-jenis pengawasan berdasarkan kelompok kerja serta progres kerja konstruksi baja dan beton
  3. Pengawasan pekerjaan pengukuran, inspeksi, hasil pengukuran, serta pembuatan Shop Drawing & Erection Drawing
  4. Pengawasan pengadaan material dan Fabrikasi komponen konstruksi, serta mobilisasi dan Demobilisasi
  5. Melakukan pengawasan perakitan / asembling komponen di lapangan
  6. Melakukan pengawasan peralatan konstruksi
  7. Pengawasan Pengetesan Loading Test, Kubus beton Test, serta Pengecoran.
  8. Pengawasan & Inspeksi Finishing, serta pembuatan As Build Drawing
  9. Inspeksi Laporan Program Kerja Pelaksanaan Konstruksi

WHO SHOULD ATTEND THIS TRAINING?:
Minimal SLTA / SMK – Teknik Bangunan dan Teknik Sipil

INSTRUCTOR :  Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION :  4 days

TRAINING TIME :  

  • 10 Jan 2023-13 Jan 2023
  • 07 Feb 2023-10 Feb 2023
  • 27 Mar 2023-30 Mar 2023
  • 10 Apr 2023-13 Apr 2023
  • 29 May 2023-01 Jun 2023
  • 19 Jun 2023-22 Jun 2023
  • 11 Jul 2023-14 Jul 2023
  • 22 Aug 2023-25 Aug 2023
  • 12 Sep 2023-15 Sep 2023
  • 10 Oct 2023-13 Oct 2023
  • 27 Nov 2023-30 Nov 2023
  • 18 Dec 2023-21 Dec 2023

INVESTMENT PRICE/PERSON :

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Turbine Operation & Maintenance (BANDUNG)

 

Gas Turbine Operation & Maintenance (BANDUNG)

Tanggal

10 Jan 2023-13 Jan 2023
07 Feb 2023-10 Feb 2023
28 Feb 2023-03 Mar 2023
11 Apr 2023-14 Apr 2023
02 May 2023-05 May 2023
19 Jun 2023-22 Jun 2023
11 Jul 2023-14 Jul 2023
31 Jul 2023-03 Aug 2023
12 Sep 2023-15 Sep 2023
10 Oct 2023-13 Oct 2023
31 Oct 2023-03 Nov 2023
18 Dec 2023-21 Dec 2023

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

Harga

  • Rp 8.500.000/person (full fare) or
  • Rp 8.250.000/person (early bird, payment 1 week before training) or
  • Rp 7.950.000/person (if there are 3 or more participants from the same company)

FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Tas
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INTRODUCTION :
Gas turbine in oil and gas used for gas plant and power plant facilities, both of plant are critical plant to append activity of production and delivery system of oil and gas. Reliability and deliverability is more important factor to provide effectiveness system after all.

OBJECTIVE :
After the course participant :

  1. Have a good knowledge of gas turbine out and technology include thermodynamic concepts, construction, detail component’s and function
  2. Will improve their ability to understand cause and effect of failure to guide root cause analysis in problem solving and trouble shooting
  3. Familiar with product of gas turbine which is used in the gas plant

TRAINING MATERIAL OUTLINE :

  1. Introduction to Gas turbine
  2. An Overview of Gas Turbines
    a. History of gas turbine
    b. Gas turbine in oil and gas industry
  3. Brayton cycle
  4. Gas turbine art and design
  5. Engine  design
  6. Operation principle
  7. Engine case and inlet air
  8. Gas turbine in detail assembly and function of components
    a. Compressor section    : Inlet guide vane, Rotor compressor,Stator Compressor,Bleed Valve and  control.
    b. Diffuser and Combustor    : Combustion chamber, Fuel Nozzle,Ignition plug
    c. Turbine  and exhaust    :  Inlet nozzle, Blade turbine and cooling system
  9. Auxiliary Components and Accessories : Bearings and Seals, Gears
  10. Gas turbine bearing and lubrication system
    • Ingition system
    • Bearing and seals
    • Fuel gas and gas system
  11. Basic combustion in gas turbine
    • Heating value in natural gas (LHV and HHV), Wobb number
    • Stochiometric combustion
    • Emission of combustion
    • How gas burned in combustion chamber
    • Cooling technology and thermal barrier coating
  12. Compressor in gas turbine
    a. Energy convertion in compressor
  13. How compressor work (increase pressure and flowing gas)
    • Gas flow compressor  phenomena stall and surge,
    • How to control  control surge  ( IGV and bleed valve)
    • Compressor failure and material
  14. Turbine who it works
    • Convert Pressure and temperature to Mechanical energy
    • How blade turbine work
    • Internal cooling and coating
    • Failure in turbine component
  15. Gas turbine operation and control
    • Operation gas turbine for gas compressor
    • Operation gas turbine for Power Generation
    • Fuel control system
    • IGV control system
    • Lubrication control system

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Water Treatment (BANDUNG)

Jadwal Training

Water Treatment (BANDUNG) TRAINING OBJECTIVES: 1. Dapat memahami konsep dasar proses pengolahan air 2. Dapat memahami cara proses dan operasi peralatan pengolahan air TRAINING MATERIAL ... Baca Selengkapnya

Water Treatment (BANDUNG)

 

Water Treatment (BANDUNG)

TRAINING OBJECTIVES:
1. Dapat memahami konsep dasar proses pengolahan air
2. Dapat memahami cara proses dan operasi peralatan pengolahan air

TRAINING MATERIAL OUTLINE:
1. Sedimentasi dan fungsi operasi sedimentasi
2. Alat sedimentasi dan cara operasi
3. Prasyarat air umpan unit sedimentasi
4. Proses Flokulasi
5. Hong Flokulasi
6. Air umpan unit hong flokulasi
7. Proses presepitasi kimia
8. Alat proses Presipitasi kimia dan cara operasinya
9. Deskripsi dan fungsi Filtrasi
10. Alat filtrasi dan cara operasinya
11. Fungsi proses pertukaran ion
12. Alat proses pertukaran ion dan proses operasinya
13. Absorpsi karbon aktif dan fungsinya
14. Proses disinfeksi dan fungsinya

WHO SHOULD ATTEND THIS TRAINING?:
1. Chemical Engineer
2. Professionals
3. Plant Maintenance / Operators / Supervisor / Superintendent

INSTRUCTOR : Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION : 4 days

TRAINING TIME :

  • 10 Jan 2023-13 Jan 2023
  • 07 Feb 2023-10 Feb 2023
  • 13 Mar 2023-16 Mar 2023
  • 10 Apr 2023-13 Apr 2023
  • 15 May 2023-18 May 2023
  • 19 Jun 2023-22 Jun 2023
  • 11 Jul 2023-14 Jul 2023
  • 22 Aug 2023-25 Aug 2023
  • 12 Sep 2023-15 Sep 2023
  • 10 Oct 2023-13 Oct 2023
  • 13 Nov 2023-16 Nov 2023
  • 18 Dec 2023-21 Dec 2023

INVESTMENT PRICE/PERSON :
1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Electric Motor : Operation, Maintenance & Troubleshooting

 

Electric Motor : Operation, Maintenance & Troubleshooting

TRAINING OBJECTIVES:
1. Dapat memahami operasi pengaturan dan karakteristik motor induksi 3 fasa
2. Dapat memahami tingkat troble shooting dan melakukan perbaikan terhadap motor induksi 3 fasa

TRAINING MATERIAL OUTLINE:
1. Konstruksi dan jenis-jenis motor induksi 3 fasa
2. Prinsip kerja motor induksi
3. Arus start, Torsi start, dan torsi nominal
4. Rugi – rugi dan effisiensi
5. Sistem pengasutan DOL, Bintang delta manual
6. Sistem pengasutan bintang delta otomatis
7. Sistem pengasutan pembalik arah putaran
8. Sistem pengasutan dua kecepatan
9. Sistem pengasutan rotor belitan
10. Teori pelacakan gangguan dan alat bantu
11. Teknik pelacakan gangguan
12. Teknik belitan
13. Dasar perbaikan bagian mekanis
14. Perbaikan bagian belitan

WHO SHOULD ATTEND THIS TRAINING?:
1. Electrical & Mechanical Engineer / Supervisor
2. Instrument Engineer / Supervisor
3. Professionals
4. Plant Maintenance / Operators / Supervisor / Superintendent

INSTRUCTOR : Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION : 4 days

TRAINING TIME :

  1. 03 Jan 2023-06 Jan 2023
  2. 31 Jan 2023-03 Feb 2023
  3. 06 Mar 2023-09 Mar 2023
  4. 03 Apr 2023-06 Apr 2023
  5. 08 May 2023-11 May 2023
  6. 05 Jun 2023-08 Jun 2023
  7. 04 Jul 2023-07 Jul 2023
  8. 08 Aug 2023-11 Aug 2023
  9. 05 Sep 2023-08 Sep 2023
  10. 03 Oct 2023-06 Oct 2023
  11. 06 Nov 2023-09 Nov 2023
  12. 04 Dec 2023-07 Dec 2023

INVESTMENT PRICE/PERSON :
1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :
1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Industrial Hygiene (Higiene Industri) Bandung

 

Industrial Hygiene (Higiene Industri) Bandung

Tanggal

  • 28 Nov 2022-30 Nov 2022
  • 19 Dec 2022-21 Dec 2022

Pukul
08.00-17.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

INVESTATION PRICE/PERSON :  

  • Rp 6.950.000/person (full fare)  atau
  • Rp 6.750.000/person (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp 6.500.000/person (peserta bergroup 3 orang atau lebih dari 1 perusahaan yang sama)

CAKUPAN DAN DESKRIPSI MATERI TRAINING:

  1. Pengantar Higiene Industri
    Topik yang akan dibahas meliputi prinsip umum higiene industri, termasuk latar belakang dan sejarah perkembangan higiene industri sebagai profesi lintas disiplin ilmu. Dibahas juga bagaimana ruang lingkup higiene industri, tantangan dan kendala penerapannya di industri.

    • Sejarah dan perkembangan higiene industri
    • Ruang lingkup higiene industri
  2. Higiene Industri I (Faktor Kimia)
    Topik yang dibahas meliputi bagaimana cara mengidentifikasi, melakukan evaluasi dan mengendalikan paparan bahan bahan kimia, biologi dalam bentuk aerosol, gas, uap, cairan, padatan dan juga dilakukan pemeriksaan dampak penyebaran risiko kesehatan bahan beracun dari tempat kerja ke lingkungan.

    • Identifikasi, evaluasi dan pengendalian Faktor bahaya kimia
    • Identifikasi, evaluasi dan pengendalian faktor bahaya biologi
  3. Higiene Industri II (Faktor Fisika)
    Topik yang dibahas meliputi bagaimana cara mengidentifikasi, melakukan evaluasi dan mengendalikan paparan factor bahaya fisika, termasuk bising, iklim kerja, getaran, dan radiasi. Termasuk di bahas di aspek ini adalah hubungan antara faktor lingkungan kerja lain terhadap kesehatan dan keselamatan kerja dan penyakit akibat kerja.

    • Identifikasi, penilaian, evaluasi dan pengendalaian bahaya bising
    • Identifikasi, penilaian, evaluasi dan pengendalian bahaya iklim kerja
    • Identifikasi,penilaian, evaluasi dan pengendalian bahaya getaran
    • Identifikasi, penilaian, evaluasi dan pengendalian bahaya radiasi
  4. Dasar Toksikologi I
    Topik yang akan dijelaskan dalam Dasar Toksikologi I ini meliputi fisiologi manusia secara umum, dampak akut dan kronis bahan beracun dalam mekanisme fisiologi. Prinsip dasar hubungan antara dosis dan respon, toksisitas pada organ yang menjadi target bahan beracun dan karakterisasi paparan terhadap tenaga kerja.

    • Prinsip dasar dosis dan respon
  5. Dasar Toksikologi II
    Topik yang dibahas merupakan kelanjutan dari topik yang telah diberikan pada Dasar Toksikologi I dimana bahasan akan lebih dipusatkan studi kasus yang berkaitan dengan toksikologi misalnya debu, pelarut organik dan debu logam.

    • Studi Kasus Toksikologi Debu dan debu Logam
    • Studi Kasus Pelarut dan Toksikologi
  6. Nilai Ambang Batas dan Interpretasinya
    Dalam topik ini akan dibahas bagaimana konsep dasar NAB, pembentukannya, interpretasinya, juga dibahas studi kasus penerapan Nilai ambang Batas di tempat kerja

    • Nilai Ambang Batas, Intepretasi dan penerapannya
  7. Teknik Sampling dan Pengujian Higiene Industri
    Pembahasan dalam topik ini meliputi pembahasan bagaimana menentukan titik pengambilan sampel, teknik dan strategi sampling serta pengujian higiene industri

    • Penentuan titik sampling dan strategi sampling
    • Praktek pengambilan sampel dan pengujian debu
    • Praktek pengambilan sampel dan pengujian gas/uap
    • Praktek pengambilan sampel dan pengujian faktor fisik
  8. Kunjungan Industri (hari ketiga)

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)
  12. Kunjungan industri

Trainer     

Waluyo, PG. Dip. Sc.(OHS).,M.Si. adalah seorang ahli di bidang HSE. Pendidikan beliau adalah Diploma III Hiperkes dan Keselamatan Kerja Universitas Sebelas Maret Surakarta, Occupational Health and Safety Management , University of Queensland- Australia, dan Postgraduate Diploma in Occupational Health and Safety Science, University of Queensland – Australia. Beliau juga banyak mengikuti diklat/kursus-kursus terkait kompetensi beliau antara lain: Diklat Pelaksana Program Hiperkes dan Keselamatan Kerja di Daerah, Diklat Fungsional Teknisi Litkayasa, Audit Internal Sistem Mutu Laboratorium ISO 17025 :2000, Sistem Mutu Laboratorium ISO 17025:2000, Emergency Response Training –OSHNET, Sistem Mutu Laboratorium ISO 17025:2000, Amandemen Sistem Mutu Laboratorium ISO 17025:2000 menjadi Sistem Mutu Laboratorium ISO 17025:2005, Uji Profisiensi-LIPI, Pelatihan Spirometri dan Audiometri, Pelatihan Manajemen Pengendalian Bising, Occupational Health and Safey Management Systems Auditor / Lead Auditor Training Course-SGS, GC Operation Training – Shimadzu, Pelatihan Assesor Kompetensi dan Assesor Lisensi-BNSP, Assesor Kompetensi-BNSP, Train of the Trainer of Safety Pasport Kerjasama dengan Ranaco Educational Training Institute-Malaysia, Occupational Health and Safey Management Systems Auditor / Lead Auditor Training Course-Sucofindo, Occupational Health and Safety Management Systems, ISO-17025–1999 Sistem Mutu Laboratorium Pengujian, International Workshop on Proficiency Testing, Internasional Seminar on OHS+E, Pengaruh Indoor Air Quality dan Emisi Gas Buang Cerobong terhadap Kesehatan di Lingkungan Kerja, International Workshop on Sustainable Emission Monitoring during Co-Processing in Cement Industries and Other Industrial Combustion Plant, Apresiasi Air dan Sanitasi di Kawasan Budidaya, dan lain-lain.  Waluyo, PG. Dip. Sc.(OHS).,M.Si. sudah memiliki banyak pengalaman kerja di bidang HSE, seperti:  Pembimbing Program Hiperkes dan Keselamatan Kerja di Perusahaan pada Balai Hiperkes dan Keselamatan Kerja Propinsi Jawa Barat, Pejabat Fungsional Teknisi Penelitian dan Perekayasaan pada Balai Hiperkes dan Keselamatan Kerja Propinsi Jawa Barat, Staff pengajar pelatihan Hiperkes dan Keselamatan Kerja bagi Paramedis Perusahaan, Dokter Perusahaan pada Balai K3 Bandung, Pejabat Fungsional Litkayasa pada Balai Hiperkes dan Keselamatan Kerja Bandung, Pejabat Fungsional Litkayasa pada Balai Keselamatan dan Kesehatan Kerja Bandung, Pejabat Fungsional Perekayasa Muda pada Balai Keselamatan dan Kesehatan Kerja Bandung, Trainer Safety Pasport, Staff pengajar mata Kuliah Ergonomi dan KK, Dasar K3 dan program K3 pada Peminatan Kesehatan Masyarakat STIKES Darma Husada Bandung, Pengampu Mata Kuliah Ergonomi dan Keselamatan Kerja, Peminatan Kesehatan Lingkungan dan Keselamatan Kerja, Pascasarjana IKM Unpad, Pengampu Mata Kuliah Penilaian dan Pengendalian Risiko Keselamatan Kesehatan Kerja Lingkungan, Peminatan Kesehatan Lingkungan dan Keselamatan Kerja, Pascasarjana IKM Unpad, Dan sebagai trainer untuk Industri di Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Boiler Control Systems Engineering (BANDUNG)

 

Boiler Control Systems Engineering (BANDUNG)

TRAINING TIME :   

  • 14 Nov 2022-17 Nov 2022
  • 19 Dec 2022-22 Dec 2022

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

TRAINING INTRODUCTION :
This training explores boiler components and their purpose. Additionally, the course explains the ISA symbols used in boiler control, how to identify the engineering and control of boilers using ISA symbols, and a method of presenting the engineering design. This training covers topics including defining the control, three elements control design and operation, ratio control fundamentals, feed forward control, feed forward plus feedback control, cascade control, and how they are implemented in distributed control systems (DCS). This training also review control concepts, proportional control, proportional plus reset control, and proportional plus reset plus derivative control; what they are; and how they are used. This training also will introduce the implementation of Model Predictive Control in industrial power plant.

TRAINING OBJECTIVE :
After completing this course, participants will be able to:

  • Identify the benefits of improved boiler process control and savings from improved efficiency
  • Develop proper control systems documentation
  • Apply principles and methods for flow and level measurements to improved boiler operations
  • Specify appropriate strategies for flow, level, and pressure control
  • Explain how to tuning boiler control systems
  • Analyze basic control loops required for boiler operation
  • Apply control concepts such as cascade, ratio, feedforward control, three elements control for boiler control
  • Specify appropriate safety system interlocks
  • Evaluate process requirements for writing instrumentation specifications

TRAINING MATERIAL OUTLINE :

  1. Emerging Technologies in power plant using Distributed Control System (DCS) Measurement Element
  2. Basic Control Loops: Loop Requirements, Piping and Instrumentation Diagram (P&ID) for Boiler
  3. Steam Supply and Firing Rate Demand: Control Single Boiler and Multiple Boilers | Steam Temperature Control
  4. Feedwater Control Systems: Level | Flow | Process Dynamics
  5. Boiler Draft Systems: ID and FD Fan | Process Dynamics
  6. Combustion Control: Cross Limiting Control | Control Single and Multiple Fuel Systems | Running Fuel Changes | Process Dynamics
  7. Model Predictive Control: Coordinated control and advance combustion control
  8. Comprehensive practice
  9. Interactive discussion

TRAINING METHODES :  
1.    Tutorial/Class
2.    Software Simulation and Demo
3.    Workshop/Practices
4.    Interactive Discussions

CLASS/EXERCISES:
1.    Develop P&IDs for gas, oil, and pulverized coal
2.    Review methods of efficiency calculations
3.    Use PC software and DCS to simulate boiler operation and drum level control
4.    Tune a boiler control system for maximum efficiency

INSTRUCTOR :   Dr. Ade Haryanto, Ph.D. and Team

INVESTATION PRICE/ PERSON :     

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Dr. Ade Haryanto, Ph.D. received the B.S. in Engineering Physics and M.S. degree in Instrumentation and Control from Bandung Institute of Technology (ITB) in 2003 and 2006, respectively, and Doctor Degree (Dr.) and Doctor of Philosophy (Ph.D) in Intelligent Control and Automation in 2010 and 2013, respectively, from School of Mechanical Engineering, Pusan National University, Busan, South Korea. His research focus is including modeling, identification, dynamics system, instrumentation and control of the power plant and its implementation using distributed control system. As a professional instructor, he has trained various topics in the scope of process control, automation, and metering systems, which were aimed to participants coming from industrial practitioners such as PT. Pupuk Kaltim, PT. Badak NGL, PT. Pertamina, PT. Indonesia Power, PT PLN, PT. Pupuk Iskandar Muda, etc. In the project implementation areas, the instructor also experience in project documentation, control system migration and power plant design.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Automotive (CARS) Air Conditioning (AC) System (BANDUNG)

 

Automotive (CARS) Air Conditioning (AC) System (BANDUNG)

Tanggal

  • 21 Nov 2022-24 Nov 2022
  • 20 Dec 2022-23 Dec 2022

TEMPAT TRAINING
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

DURASI TRAINING :   4 hari

TUJUAN :
Setelah pelatihan peserta diharapkan dapat memahami system pengkondisian udara pada kendaraan otomotif, dapat mengoprasikan, merawat dan memecahkan masalah-masalah AC, serta dapat memperbaiki system AC yang ramah lingkungan.

CAKUPAN MATERI TRAINING:

  1. Pendahuluan (Review perpindahan panas, pengaturan/control refrigerant, mekanisme pengikisan lapisan ozone, teori penipisan ozone).
  2. Teori Dasar Sistem AC Mobil ( Instalasi mekanik AC, Listrik dasar AC).
  3. Penggantian Refrigerant Baru (berbagai jenis refrigerant baru, nama-nama refrigerant, penamaan/tata nama refrigerant, refrigerant pengganti, efek rumah kaca).
  4. Modifikasi dari sistim AC lama ke system AC baru (Sistem AC R12 ke R134a)
    • Oli Kompresor
    • Bahan penyekat (seals)
    • Hose-hose tekanan tinggi dan rendah.
    • Desiccant
    • Pencegahan terhadap salah pengisian & penyambungan pipa (perubahan katup, bentuk sambungan, pemasangan vacuum pump adapter, perubahan detector kebocoran gas).
    • Menjaga pelepasan refrigerant ke udara.
    • Penyesuaian system.
  5. Peralatan system AC R134a/Perubahan komponen
    • Kompresor
    • Magnetic Cluth
    • Condenser
    • Evaporator
    • Receiver
    • Pressure Switch
    • Expansion Valve
    • Evaporator Pressure Regulator
  6. Hal-hal/ tindakan yang perlu diperhatikan saat perbaikan
    • Pertukaran antar perangkat AC
    • Kasus kesalahan pemakaian
    • Saat penggantian spare part
  7. Hal-hal yang perlu diperhatikan ketika mengisi refrigerant
    • Menghubungkan manifold gaunge
    • Menyambung disconnect Adapter
    • Melepas kembali Quick Disconnect Adapter
  8. Perawatan AC Mobil (Shedule maintenance, Preventive maintenance, Predictive maintenance).
  9. Troubleshooting AC mobil (saat memeriksa jumlah pengisian refrigerant, mengatasi kesulitan pada kondisi normal, refrigerant tidak cukup, aliran refrigerant tersumbat/ sulit bersirkulasi, adanya uap air pada system sirkulasi, udara masuk dalam sirkulasi , katup ekspansi terlalu membuka).
  10. Alat peraga : ( Board simulator AC mobil, alat ukur system Refrigerasi dan pengkondisian udara, alat alat peraga system pendingin).

INVESTATION PRICE/PERSON :  

  • Rp. 8.500.000/peserta (bayarpenuh) atau
  • Rp. 8.250.000/peserta (early bird, yang membayar 1 minggusebelum training) atau
  • Rp. 7.950.000/peserta (pesertabergroup yang terdiridari 3 pesertaataulebihdari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INSTRUKTUR TRAINING
Ir. M. Munir Fahmi, Dipl.ME, MT. got his master degree from Brawijaya University Malang majoring in Energy Conversion. He is till now becoming lecturer at mechanical engineering Poltek ITB (Polban) and he is head of laboratory of fluid, thermal and otomotive. He teachs frequently for industrial training class for Indonesian companies participants for some topics on mechanical engineering such as Mechanical Rotating Equipment, Operation & Trouble Shooting, Pumps, Primover: Operation, Maintenance & Troubleshooting, Genset, Operation, Maintenance & Trouble Shooting, lubrication, Preventive & Predictive Maintenance, Advance Maintenance Management, Reliability Maintenance Engineering, Operation, Maintenance & Trouble Shooting of Pump & Compressor and etc.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pipeline Risk & Integrity Management (BANDUNG)

 

Pipeline Risk & Integrity Management (BANDUNG)

Tanggal

  • 07 Nov 2022-09 Nov 2022
  • 19 Dec 2022-21 Dec 2022

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION :
Pipeline Risk & Integrity Management is the most current and modern integrated management system to insure public and environmental safety for oil and gas pipeline transportation operation both onshore and offshore pipelines. It covers detail risk and integrity assessment, inspection, maintenance and repair plan. The pipeline management will also follows specific rules and procedures outlined by ISO 9000 quality system. To enhance the coverage, pipeline risk and integrity management is usually combined with geographical information system (GIS) and online security electronic system to monitor and control the pipeline right of way (ROW) more effectively. Data base management system is therefore a critical part for successful pipeline integrity management implementation. In this training course ANSI/ASME 31.8S and API 1160 as recommended practices and other related method and procedures, will be discussed.

TRAINING MATERIAL OUTLINE :

  1. Threat and Hazard Identification
  2. High Consequence Areas Determination
  3. Data Mining, Selection and Integration
  4. Qualitative and Quantitative Risk Assessment
  5. Mechanical Integrity Assessment
  6. Risk Mitigation Recommendation
  7. Inspection, Maintenance and Repair Plan
  8. Pipeline Operator Organization and ISO 9000 Quality System
  9. GIS and Pipeline ROW Maintenance Management

TRAINING BENEFIT :
The integrity management program is designed to benefit pipeline operators, public safety, all stake holders by supplementing existing safety requirements with both risk- based management and mechanical integrity principles that focus on safety risks in high consequence areas, such as highly populated or frequented areas. It introduced a new perspective on pipeline operations in the most cost effective way.

WHO SHOULD ATTEND THIS TRAINING?
Plant and Pipeline Operators, Supervisors, Engineers and Manager.

INVESTATION PRICE/ PERSON :  

  1. Rp 6.950.000/person (full fare)  or
  2. Rp 6.750.000/person (early bird, payment 1 week before training) or
  3. Rp 6.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flashdisk Contains Training Material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Bagpack
  • Training Photo
  • Training Room with Full AC Facilities and multimedia
  • Once lunch and twice coffeebreak every day of training
  • Qualified and experienced instructor
  • Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

Trainer
Dr. Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager, at PT. MMS, PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Plumbing System And Maintenance (BANDUNG)

 

Plumbing System And Maintenance (BANDUNG)

Fungsi dari peralatan plumbing adalah untuk menyediakan air bersih ke tempat-tempat yang dikehendaki dengan tekanan yang cukup (sistem penyediaan air bersih) dan membuang air kotor ketempat-tempat tertentu tanpa mencemarkan bagian penting lainnya (sistem pembuangan).

Sistem plumbing adalah sarana yang sangat penting dan dikenal banyak orang, keberhasilan suatu sistem plumbing adalah tergantung dengan perencanaan dalam perancangan, kesalahan akan menyebabkan sistem tidak akan berfungsi dengan semestinya, hal lainnya yang dapat menyebabkan sistem tidak berfungsi adalah pemasangan dan perawatan dari peralatan plumbing.

TRAINING MATERIAL OUTLINE :
1. Overview Plumbing System
• Fungsi Peralatan Plumbing
• Jenis Peralatan Plumbing
• Perencanaan
• Prinsip Dasar Sistem Penyediaan Air
a. Kualitas air
b. Pencegahan Pencemaran Air
2. Sistem Penyediaan Air Bersih
• Perancangan Sistem Pipa Air Dingin
a. Sistem Sambungan Langsung
b. Sistem Tangki Atas
c. Sistem Tangki Tekan
d. Sistem Tanpa Tangki
3. Sistem Penyediaan Air Panas
• Instalasi lokal
• Instalasi sentral
4. Pemeliharaan Instalasi Plumbing
VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION :   3 hari

WAKTU TRAINING :

  • 12 Sep 2022-14 Sep 2022
  • 10 Oct 2022-12 Oct 2022
  • 31 Oct 2022-02 Nov 2022
  • 19 Dec 2022-21 Dec 2022

HARGA INVESTASI/PESERTA :

  1. Rp. 6.500.000/peserta (bayar penuh) atau
  2. Rp. 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp. 5.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ade Suryatman Margana, ST.,M.Eng. adalah dosen tetap pada Politeknik Bandung (Polban) dan Kepala Jurusan Teknik Refrigerasi dan Tata Udara. Beliau juga memberikan pelatihan/ training kepada perusahaan-perusahaan besar di Indonesia untuk topik-topik :

  • Maintenance Management
  • Inventory Control
  • Reliability Centered Maintenance
  • Retrofit Hydrocarbon
  • Health Safety and Environment
  • Mechanical and Electrical
  • Refrigeration and Air Conditioning, et

Lebih spesifik beliau ahli dalam bidang RHVAC, Mechanical & Electrical and Maintenance Management, dan memegang sertifikat kompetensi :

  1. Ahli K3 Madya (Senior Occupational Health and Safety Professional), BNSP
  2. Ahli Maintenance RHVAC System, ECOZONE, Nederland, Belanda

Beberapa company yang pernah menggunakan jasa beliau diantaranya : PT. Pertamina (Persero), Krakatau Steel, Pupuk Sriwijaya, Red Cross International, Sapta Indra Sejati, CococoPhillips, Freeport, dll.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Plant Life Management Through Reliability Based Inspection (BANDUNG)

 

Plant Life Management Through Reliability Based Inspection (BANDUNG)

Tanggal

  • 08 Aug 2022-12 Aug 2022
  • 12 Sep 2022-16 Sep 2022
  • 10 Oct 2022-14 Oct 2022
  • 21 Nov 2022-25 Nov 2022
  • 12 Dec 2022-16 Dec 2022

TRAINING DURATION
5 days

Jam Pelaksanaan
9:00 – 17:00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Dr. Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager, at PT. MMS, PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.

Harga

  • Rp. 9.750.000/peserta (bayar penuh) atau
  • Rp. 9.500.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp. 9.250.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

“PLANT LIFE MANAGEMENT THROUGH RELIABILITY BASED INSPECTION”

TRAINING MATERIAL OUTLINE :

  1. Plant Boundary Definition
  2. Damage Mechanism and Failure Mode
  3. Corrosion Circuit and Criticality
  4. Determination
  5. Metal Loss Determination
  6. Creep and Fatigue Failure Mode
  7. Introduction to Structural Reliability and Probabilistic
  8. Limit State Function & FOSM Formulation
  9. Probabilistic Remaining Strength Calculation
  10. Probabilistic Remaining Life Estimation
  11. Inspection, Maintenance and Repair Plan and Strategy
  12. Interactive Discussion

WHO SHOULD ATTEND THIS TRAINING?
Managers, engineers, superintendents, supervisors, inspectors and technicians involved in the decision making process in the inspection, maintenance and operation process.
The minimum education background of the participants is at bachelor level or senior high school with at least five years of experience.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pemindahan Tanah Mekanis (BANDUNG)

 

Pemindahan Tanah Mekanis (BANDUNG)

TRAINING TIME :   

  • 18 May 2022-20 May 2022
  • 27 Jun 2022-29 Jun 2022
  • 06 Jul 2022-08 Jul 2022
  • 03 Aug 2022-05 Aug 2022
  • 07 Sep 2022-09 Sep 2022
  • 05 Oct 2022-07 Oct 2022
  • 28 Nov 2022-30 Nov 2022
  • 14 Dec 2022-16 Dec 2022

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   3 days

TRAINING MATERIAL OUTLINE :
1.    Alat-alat Pemindahan Tanah mekanis
2.    Land Clearing
3.    Pemuatan
4.    Pengangkutan
5.    Dumping

INSTRUCTOR :    Ir.A.M.Ulum A. Gani, M.Sc

INVESTATION PRICE/PERSON :   

  • Rp. 6.500.000/peserta (bayar penuh)  atau
  • Rp. 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training)  atau
  • Rp. 5.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  • Modul Training
  • Flash Disk berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Ir. A. M. Ulum A. Gani, M.Sc. ,who is graduated from Geofisika Tambang ITB Bandung, was born in Watan Soppeng, 18 December 1949, he is peneliti utama at Pusat Penelitian Geoteknologi Lembaga Ilmu Pengetahuan Indonesia (LIPI). 1990 – 1993 he was becoming head of  Laboratorium Eksplorasi Mineral, Balitbang Mineral, Puslitbang Geoteknologi, Lembaga Ilmu Pengetahuan Indonesia (LIPI), and 1993-1997 he was becoming head of Laboratorium Pemanfaatan Bitumen, Puslitbang Geoteknologi –LIPI Bandung. He is lecturer at Sekolah Tinggi Teknologi Mineral Indonesia (STTMI) Bandung since 1991-now and becoming head of department at Teknik Pertambangan, Sekolah Tinggi Teknologi Mineral Indonesia (STTMI) Bandung. He has performed many seminars related to his expertise.  Ir.A.M.Ulum A. Gani, M.Sc. has researched and published the results numerous number. At campus Sekolah Tinggi Teknolgi Mineral Indonesia (STTMI) Bandung he teachs for several subjects as follows Pengantar Teknologi Mineral, Bahan Galian Industri, Pembukaan Tambang bawah Tanah, Ventilasi Tambang, Seminar Tambang, and Kerja Praktek. His this much real experiences will be shared with participants in training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

2024

informasi-seminar.com | infoseminar.co.id