Pipeline Risk & Integrity Management (BANDUNG)

Jadwal Training

Pipeline Risk & Integrity Management (BANDUNG) Tanggal 07 Nov 2022-09 Nov 2022 19 Dec 2022-21 Dec 2022 Tempat Hotel Kagum Group Bandung (Golden Flower, Banana ... Baca Selengkapnya

Pipeline Risk & Integrity Management (BANDUNG)

Jadwal Training

Pipeline Risk & Integrity Management (BANDUNG)

Tanggal

  • 07 Nov 2022-09 Nov 2022
  • 19 Dec 2022-21 Dec 2022

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING INTRODUCTION :
Pipeline Risk & Integrity Management is the most current and modern integrated management system to insure public and environmental safety for oil and gas pipeline transportation operation both onshore and offshore pipelines. It covers detail risk and integrity assessment, inspection, maintenance and repair plan. The pipeline management will also follows specific rules and procedures outlined by ISO 9000 quality system. To enhance the coverage, pipeline risk and integrity management is usually combined with geographical information system (GIS) and online security electronic system to monitor and control the pipeline right of way (ROW) more effectively. Data base management system is therefore a critical part for successful pipeline integrity management implementation. In this training course ANSI/ASME 31.8S and API 1160 as recommended practices and other related method and procedures, will be discussed.

TRAINING MATERIAL OUTLINE :

  1. Threat and Hazard Identification
  2. High Consequence Areas Determination
  3. Data Mining, Selection and Integration
  4. Qualitative and Quantitative Risk Assessment
  5. Mechanical Integrity Assessment
  6. Risk Mitigation Recommendation
  7. Inspection, Maintenance and Repair Plan
  8. Pipeline Operator Organization and ISO 9000 Quality System
  9. GIS and Pipeline ROW Maintenance Management

TRAINING BENEFIT :
The integrity management program is designed to benefit pipeline operators, public safety, all stake holders by supplementing existing safety requirements with both risk- based management and mechanical integrity principles that focus on safety risks in high consequence areas, such as highly populated or frequented areas. It introduced a new perspective on pipeline operations in the most cost effective way.

WHO SHOULD ATTEND THIS TRAINING?
Plant and Pipeline Operators, Supervisors, Engineers and Manager.

INVESTATION PRICE/ PERSON :  

  1. Rp 6.950.000/person (full fare)  or
  2. Rp 6.750.000/person (early bird, payment 1 week before training) or
  3. Rp 6.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flashdisk Contains Training Material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Bagpack
  • Training Photo
  • Training Room with Full AC Facilities and multimedia
  • Once lunch and twice coffeebreak every day of training
  • Qualified and experienced instructor
  • Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

Trainer
Dr. Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager, at PT. MMS, PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Plumbing System And Maintenance (BANDUNG)

Jadwal Training

Plumbing System And Maintenance (BANDUNG) Fungsi dari peralatan plumbing adalah untuk menyediakan air bersih ke tempat-tempat yang dikehendaki dengan tekanan yang cukup (sistem penyediaan air ... Baca Selengkapnya

Plumbing System And Maintenance (BANDUNG)

Jadwal Training

Plumbing System And Maintenance (BANDUNG)

Fungsi dari peralatan plumbing adalah untuk menyediakan air bersih ke tempat-tempat yang dikehendaki dengan tekanan yang cukup (sistem penyediaan air bersih) dan membuang air kotor ketempat-tempat tertentu tanpa mencemarkan bagian penting lainnya (sistem pembuangan).

Sistem plumbing adalah sarana yang sangat penting dan dikenal banyak orang, keberhasilan suatu sistem plumbing adalah tergantung dengan perencanaan dalam perancangan, kesalahan akan menyebabkan sistem tidak akan berfungsi dengan semestinya, hal lainnya yang dapat menyebabkan sistem tidak berfungsi adalah pemasangan dan perawatan dari peralatan plumbing.

TRAINING MATERIAL OUTLINE :
1. Overview Plumbing System
• Fungsi Peralatan Plumbing
• Jenis Peralatan Plumbing
• Perencanaan
• Prinsip Dasar Sistem Penyediaan Air
a. Kualitas air
b. Pencegahan Pencemaran Air
2. Sistem Penyediaan Air Bersih
• Perancangan Sistem Pipa Air Dingin
a. Sistem Sambungan Langsung
b. Sistem Tangki Atas
c. Sistem Tangki Tekan
d. Sistem Tanpa Tangki
3. Sistem Penyediaan Air Panas
• Instalasi lokal
• Instalasi sentral
4. Pemeliharaan Instalasi Plumbing
VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION :   3 hari

WAKTU TRAINING :

  • 12 Sep 2022-14 Sep 2022
  • 10 Oct 2022-12 Oct 2022
  • 31 Oct 2022-02 Nov 2022
  • 19 Dec 2022-21 Dec 2022

HARGA INVESTASI/PESERTA :

  1. Rp. 6.500.000/peserta (bayar penuh) atau
  2. Rp. 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp. 5.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ade Suryatman Margana, ST.,M.Eng. adalah dosen tetap pada Politeknik Bandung (Polban) dan Kepala Jurusan Teknik Refrigerasi dan Tata Udara. Beliau juga memberikan pelatihan/ training kepada perusahaan-perusahaan besar di Indonesia untuk topik-topik :

  • Maintenance Management
  • Inventory Control
  • Reliability Centered Maintenance
  • Retrofit Hydrocarbon
  • Health Safety and Environment
  • Mechanical and Electrical
  • Refrigeration and Air Conditioning, et

Lebih spesifik beliau ahli dalam bidang RHVAC, Mechanical & Electrical and Maintenance Management, dan memegang sertifikat kompetensi :

  1. Ahli K3 Madya (Senior Occupational Health and Safety Professional), BNSP
  2. Ahli Maintenance RHVAC System, ECOZONE, Nederland, Belanda

Beberapa company yang pernah menggunakan jasa beliau diantaranya : PT. Pertamina (Persero), Krakatau Steel, Pupuk Sriwijaya, Red Cross International, Sapta Indra Sejati, CococoPhillips, Freeport, dll.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Plant Life Management Through Reliability Based Inspection (BANDUNG)

Jadwal Training

Plant Life Management Through Reliability Based Inspection (BANDUNG) Tanggal 08 Aug 2022-12 Aug 2022 12 Sep 2022-16 Sep 2022 10 Oct 2022-14 Oct 2022 21 ... Baca Selengkapnya

Plant Life Management Through Reliability Based Inspection (BANDUNG)

Jadwal Training

Plant Life Management Through Reliability Based Inspection (BANDUNG)

Tanggal

  • 08 Aug 2022-12 Aug 2022
  • 12 Sep 2022-16 Sep 2022
  • 10 Oct 2022-14 Oct 2022
  • 21 Nov 2022-25 Nov 2022
  • 12 Dec 2022-16 Dec 2022

TRAINING DURATION
5 days

Jam Pelaksanaan
9:00 – 17:00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Dr. Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager, at PT. MMS, PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.

Harga

  • Rp. 9.750.000/peserta (bayar penuh) atau
  • Rp. 9.500.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp. 9.250.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

“PLANT LIFE MANAGEMENT THROUGH RELIABILITY BASED INSPECTION”

TRAINING MATERIAL OUTLINE :

  1. Plant Boundary Definition
  2. Damage Mechanism and Failure Mode
  3. Corrosion Circuit and Criticality
  4. Determination
  5. Metal Loss Determination
  6. Creep and Fatigue Failure Mode
  7. Introduction to Structural Reliability and Probabilistic
  8. Limit State Function & FOSM Formulation
  9. Probabilistic Remaining Strength Calculation
  10. Probabilistic Remaining Life Estimation
  11. Inspection, Maintenance and Repair Plan and Strategy
  12. Interactive Discussion

WHO SHOULD ATTEND THIS TRAINING?
Managers, engineers, superintendents, supervisors, inspectors and technicians involved in the decision making process in the inspection, maintenance and operation process.
The minimum education background of the participants is at bachelor level or senior high school with at least five years of experience.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pemindahan Tanah Mekanis (BANDUNG)

Jadwal Training

Pemindahan Tanah Mekanis (BANDUNG) TRAINING TIME :    18 May 2022-20 May 2022 27 Jun 2022-29 Jun 2022 06 Jul 2022-08 Jul 2022 03 Aug ... Baca Selengkapnya

Pemindahan Tanah Mekanis (BANDUNG)

Jadwal Training

Pemindahan Tanah Mekanis (BANDUNG)

TRAINING TIME :   

  • 18 May 2022-20 May 2022
  • 27 Jun 2022-29 Jun 2022
  • 06 Jul 2022-08 Jul 2022
  • 03 Aug 2022-05 Aug 2022
  • 07 Sep 2022-09 Sep 2022
  • 05 Oct 2022-07 Oct 2022
  • 28 Nov 2022-30 Nov 2022
  • 14 Dec 2022-16 Dec 2022

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   3 days

TRAINING MATERIAL OUTLINE :
1.    Alat-alat Pemindahan Tanah mekanis
2.    Land Clearing
3.    Pemuatan
4.    Pengangkutan
5.    Dumping

INSTRUCTOR :    Ir.A.M.Ulum A. Gani, M.Sc

INVESTATION PRICE/PERSON :   

  • Rp. 6.500.000/peserta (bayar penuh)  atau
  • Rp. 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training)  atau
  • Rp. 5.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  • Modul Training
  • Flash Disk berisi materi training
  • Sertifikat
  • ATK: NoteBook dan Ballpoint
  • T-Shirt
  • Ransel
  • Foto Training
  • Ruang Training dengan fasilitas Full AC dan multimedia
  • Makan siang dan 2 kali coffeebreak
  • Instruktur yang Qualified
  • Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Ir. A. M. Ulum A. Gani, M.Sc. ,who is graduated from Geofisika Tambang ITB Bandung, was born in Watan Soppeng, 18 December 1949, he is peneliti utama at Pusat Penelitian Geoteknologi Lembaga Ilmu Pengetahuan Indonesia (LIPI). 1990 – 1993 he was becoming head of  Laboratorium Eksplorasi Mineral, Balitbang Mineral, Puslitbang Geoteknologi, Lembaga Ilmu Pengetahuan Indonesia (LIPI), and 1993-1997 he was becoming head of Laboratorium Pemanfaatan Bitumen, Puslitbang Geoteknologi –LIPI Bandung. He is lecturer at Sekolah Tinggi Teknologi Mineral Indonesia (STTMI) Bandung since 1991-now and becoming head of department at Teknik Pertambangan, Sekolah Tinggi Teknologi Mineral Indonesia (STTMI) Bandung. He has performed many seminars related to his expertise.  Ir.A.M.Ulum A. Gani, M.Sc. has researched and published the results numerous number. At campus Sekolah Tinggi Teknolgi Mineral Indonesia (STTMI) Bandung he teachs for several subjects as follows Pengantar Teknologi Mineral, Bahan Galian Industri, Pembukaan Tambang bawah Tanah, Ventilasi Tambang, Seminar Tambang, and Kerja Praktek. His this much real experiences will be shared with participants in training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Value Engineering (Rekayasa Nilai) BANDUNG

Jadwal Training

Value Engineering (Rekayasa Nilai) BANDUNG Tanggal 05 Mei 2021-06 Mei 2021 30 Jun 2021-01 Jul 2021 21 Jul 2021-22 Jul 2021 18 Agust 2021-19 Agust ... Baca Selengkapnya

Value Engineering (Rekayasa Nilai) BANDUNG

Jadwal Training

Value Engineering (Rekayasa Nilai) BANDUNG

Tanggal
05 Mei 2021-06 Mei 2021
30 Jun 2021-01 Jul 2021
21 Jul 2021-22 Jul 2021
18 Agust 2021-19 Agust 2021
29 Sep 2021-30 Sep 2021
20 Okt 2021-21 Okt 2021
17 Nop 2021-18 Nop 2021
15 Des 2021-16 Des 2021

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION
2 hari

LATAR BELAKANG:
Value Engineering (Rekayasa Nilai) adalah suatu susunan metode untuk mengurangi biaya produksi atau pengurangan barang dan jasa tanpa mengurangi mutu (performansi) yang diperlukan

TUJUAN:
Setelah mengikuti pelatihan ini peserta diharapkan dapat :

  1. Mengidendifikasi fungsi dari suatu produk
  2. Menghitung biaya (COST) dan biaya terendah (WORTH) dari suatu produk dengan fungsi tertentu
  3. Mengimplementasikan teknik kreatif dalam mengembangkan alternative
  4. Memilih alternative terbaik secara sistimatis
  5. Menyiapkan Model Biaya (Cost Model)
  6. Meningkatkan kesadaran tentang konsep suatu Nilai

MANFAAT:
Setelah mengikuti pelatihan ini diharapkan peserta memperoleh :

  • Pemahaman yang lebih baik tentang  Value Engineering (Rekayasa Nilai )
  • Pemahaman yang lebih baik tentang penarapan Value Engineering dalam usaha untuk menurunkan biaya

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?:
Supervisor, Bagian Teknik, Manajer Teknik Produksi

METODE PENYAMPAIAN :
Para peserta diharapkan dapat terlibat secara aktif pada setiap sesi dari pelatihan ini yang akan dibawakan oleh para Instruktur dengan rincian muatan pelatihan sebagai berikut :

  1. Penjelasan teori, 30%
  2. Pemberian kasus sebagai bahan untuk simulasi dan diskusi kelompok, 30%
  3. Presentasi, diskusi, dan umpan balik dari peserta terhadap kasus-kasus yang diberikan, 40%

CAKUPAN MATERI TRAINING:

  1. Definisi Value Engineering
  2. Tujuan Value Engineering
  3. Fungsi (Function), Biaya (Cost) dan Biaya terendah (Worth)
  4. Metode mengekpresikan fungsi
  5. Identifikasi, Klarifikasi dan Nama suatu Fungsi
  6. Klasifikasi Fungsi
  7. Fungsi Estetika
  8. Fungsi – Biaya
  9. Fungsi – Biaya Terendah
  10. Proses Menentukan Biaya Terendah
  11. Study Nilai
  12. Langkah-langkah study Value Engineering :
    • Tahap Pengumpulan Informasi
    • Tahap Analisis Fungsi
    • Tahap Kreatifitas
    • Tahap Penilaian
    • Tahap Pengembangan
    • Tahap Presentasi
    • Tahap Implementasi
    • Tahap Tindak Lanjut

JADWAL PER HARI :
HARI 1:

  1. Pembukaan dan Perkenalan
  2. Definisi & Tujuan Rekayasa Nilai
  3. Fungsi, Biaya dan Worth
  4. Tahap Pengumpulan Informasi
  5. Tahap Analysis Fungsi

HARI 2:

  1. Tahap Kreatifitas
  2. Tahap Pemilihan Alternatif
  3. Tahap Implementasi
  4. Penutupan

INVESTATION PRICE/PERSON :    

  • Rp. 4.500.000/peserta (bayar penuh) atau
  • Rp. 4.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp. 3.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INSTRUKTUR TRAINING
Ir. Akhmad Dimyati,MBA. was born December 12th 1954 in Bandung, He was graduated from Industrial engineering Institut Teknologi Bandung, ITB for his bachelor and from magister business administration ITB for his magister program. From 1982 – 2003 he worked at PT.INTI (persero) for some position, such as manager of production control, manager of quality audit, expert staff for development, manager of training and education/diklat, and unit head for small business development assistance. He was also as member of supervisory board for pension fund koperasi yayasan kesejahteraan pegawai at PT.INTI(persero). Since 1982 he has been as lecturer for university in Bandung at industrial engineering for bachelor and magister program.  Ir. Akhmad Dimyati, MBA. has followed many courses to improve his competencies. And now he is becoming trainer for industrial training for topics in his competencies, such as logistics management, project management, production management, Balanced Score Card, supply chain and warehousing management. Mr. Akhmad Dimyati has much real experiences and he also do consultation projects. With his complete knowledge and experiences he will share in his training class to participants.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Refrigeration : Retrofit (BANDUNG)

Jadwal Training

Refrigeration : Retrofit (BANDUNG) LATAR BELAKANG: Sistem Refrigerasi dan Tata Udara banyak digunakan dalam kehidupan sehari-hari dan sangat bermanfaat bagi kebutuhan hidup manusia. Dalam aplikasi ... Baca Selengkapnya

Refrigeration : Retrofit (BANDUNG)

Jadwal Training

Refrigeration : Retrofit (BANDUNG)

LATAR BELAKANG:
Sistem Refrigerasi dan Tata Udara banyak digunakan dalam kehidupan sehari-hari dan sangat bermanfaat bagi kebutuhan hidup manusia. Dalam aplikasi sistem refrigerasi, proses pembekuan makanan sangat bermanfaat dalam menjaga kesegaran dan keawetan makanan. Sedangkan dalam aplikasi sistem tata udara, pengkondisian udara dalam suatu ruangan berguna untuk mendapatkan kenyamanan bagi penghuni yang berada didalam ruangan juga untuk menjaga kualitas dari produk atau alat tertentu yang temperature dan kelembabannya harus mengikuti standar tertentu.

Refrigeran dalam sistem refrigerasi mempunyai peran yang sangat penting yaitu zat kerja utama yang digunakan untuk menyerap dan mengalirkan kalor dalam sistem refrigerasi. Refrigeran merupakan komponen terpenting siklus refrigerasi karena refrigeran yang menimbulkan efek pendinginan dan pemanasan pada mesin refrigerasi.Refrigeran yang sering digunakan pada industri-industri, gedung bertingkat, perkantoran, mal maupun rumah tangga yaitu refrigeran sintetik. Jenis refrigerant sintetik diantaranya Chlorofluorocarbon (CFC), Hydrochlorofluorocarbon (HCFC) dan Hydroflurocarbon (HFC). Refrigeran jenis sintetis mempunyai banyak kelemahan, yaitu tidak ramah lingkungan seperti merusak lapisan ozon, menimbulkan pemanasan global dan memerlukan tenaga listrik yang cukup besar.

Kesepakatan internasional dalam Konvensi Wina, Protokol Monteral, undang-undang dan perarturan pemerintah Indonesia yaitu membahas tentang penurunan produksi dan konsumsi bahan-bahan kimia perusak ozon ( lima jenis CFC dan 3 jenis halon). CFC termasuk Ozone Depleting Substance (ODS), yaitu zat yang dapat menyebabkan kerusakan ozon, maka mulai mencoba melakukan penghentian pemakaian ODS. Maka untuk menghapus refrigerant yang berjenis CFC di gunakan refrigerant alternative yang memiliki nilai Ozon Depleting Potential (ODP) nol, dan GWP yang dapat diabaikan yaitu hidrokarbon. Hidrokarbon sebagai refrigeran sudah dikenal masyarakat sejak 1920 di awal teknologi refrigerasi bersama fluida kerja natural lainnya seperti ammonia, dan karbon dioksida. Hidrokarbon memiliki beberapa kelebihan seperti ramah lingkungan, memberikan kinerja sistem refrigerasi yang lebih baik, keawetan umur kompresor, dan hemat energi.

Yang menjadi permasalahan adalah bagaimana mengganti refrigerant sintetik dengan refrigerant hidrokarkon. Salah satu jalan keluarnya adalah selain mengganti jenis refrigerant yang paling baru seperti R 32 yaitu dengan melakukan proses retrofit.

TUJUAN TRAINING:

  1. Memahami Prinsip Dasar Sistem Refrigerasi dan Peralatan RHVAC
  2. Memahami Sistem Tata Udara Komersial dan Industri
  3. Memahami dan mampu melakukan Perawatan Sistem RHVAV
  4. Mampu menangani kelainan operasi sistem RHVAC (Trouble Shooting)
  5. Mampu mengevaluasi unjuk kerja Sistem Refrigerasi dan Tata Udara
  6. Undang-undang dan peraturan Menteri tentang pembatasan, penghapusan refrigerant sintetik
  7. Refrigerant Hidrokarbon
  8. Praktikum Retrofit

CAKUPAN MATERI TRAINING:

  1. Prinsip-prinsip dasar pendinginan
  2. Prinsip dasar mesin refrigerasi: vapour compression cycle, absorbsion refrigeration
  3. Siklus termodinamika
  4. Komponen utama dan bantu mesin refrigerasi
  5. Sistem tata udara komersial dan industri
  6. Prestasi Mesin Refrigerasi
  7. Refrigerants: jenis, sifat, keunggulan dan kelemahan
  8. Pengkondisian Udara: sistem, beban pendinginan, parameter kenyamanan dan keperluan udara
  9. Maintenace
  10. Troubleshooting
  11. Peraturan Menteri PerindustrianNo. 41/M-IND/PER/5/2014 Larangan Penggunaan Hydro chloro fluoro carbon (HCFC) di Bidang Perindustrian
  12. Peraturan Menteri Perdagangan No. 3/M-DAG/PER/01/2012 tentang Ketentuan Impor Bahan Perusak Lapisan Ozon (BPO) à pembatasan impor HCFC melalui penetapan kuota nasional
  13. Peraturan Menteri Perdagangan No. 55/M-Dag/PER/9/2014 Tentang Ketentuan Impor Barang Berbasis Sistem Pendingin
  14. Praktikum Retrofit (masalah lingkungan global, peralatan service dan retrofit)
  15. Studi kasus
  16. Diskusi

INSTRUCTOR :Ade S. Margana, M.Eng and Team

VENUE :   Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION :4hari

WAKTU TRAINING :
16 May 2022-19 May 2022
13 Jun 2022-16 Jun 2022
25 Jul 2022-28 Jul 2022
29 Aug 2022-01 Sep 2022
26 Sep 2022-29 Sep 2022
24 Oct 2022-27 Oct 2022
14 Nov 2022-17 Nov 2022
12 Dec 2022-15 Dec 2022

HARGA INVESTASI/PESERTA : 

  1. Rp. 8.500.000/peserta (bayar penuh) atau
  2. Rp. 8.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp. 7.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR

AdeSuryatman Margana,ST.,M.Eng. adalah dosen tetap pada Politeknik Bandung (Polban) dan KepalaJurusan TeknikRefrigerasidanTataUdara. Beliau juga memberikan pelatihan/ training kepada perusahaan-perusahaan besar di Indonesia untuk topik-topik :

  • MaintenanceManagement
  • InventoryControl
  • ReliabilityCentered Maintenance
  • Retrofit Hydrocarbon
  • Health SafetyandEnvironment
  • MechanicalandElectrical
  • Refrigerationand Air Conditioning,et

Lebih spesifik beliau ahli dalam bidang RHVAC,Mechanical & Electrical and Maintenance Management, dan memegang sertifikat kompetensi :

  1. Ahli K3Madya(Senior Occupational Healthand Safety Professional),BNSP
  2. Ahli Maintenance RHVAC System, ECOZONE, Nederland, Belanda

Beberapa company yang pernah menggunakan jasa beliau diantaranya : PT. Pertamina (Persero),Krakatau Steel, PupukSriwijaya, Red Cross International, Sapta Indra Sejati, CococoPhillips, Freeport, dll.

 

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Industrial Combustion And Burner (BANDUNG)

Jadwal Training

Industrial Combustion And Burner (BANDUNG) Tanggal 09 May 2022-12 May 2022 06 Jun 2022-09 Jun 2022 11 Jul 2022-14 Jul 2022 29 Aug 2022-01 Sep ... Baca Selengkapnya

Industrial Combustion And Burner (BANDUNG)

Jadwal Training

Industrial Combustion And Burner (BANDUNG)

Tanggal

  • 09 May 2022-12 May 2022
  • 06 Jun 2022-09 Jun 2022
  • 11 Jul 2022-14 Jul 2022
  • 29 Aug 2022-01 Sep 2022
  • 12 Sep 2022-15 Sep 2022
  • 10 Oct 2022-13 Oct 2022
  • 07 Nov 2022-10 Nov 2022
  • 05 Dec 2022-08 Dec 2022

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Sere, Bandung

Investasi

  • Rp. 8.950.000/peserta (bayarpenuh) atau
  • Rp. 8.750.000/peserta (early bird, yang membayar 1 minggusebelum training) atau
  • Rp. 8.500.000/peserta (pesertabergroup yang terdiridari 3 pesertaataulebihdari 1 perusahaan yang sama)

LATAR BELAKANG :
Pemahaman tentang pembakaran (combustion) dan operasional burner cukup pada sebuah industri akan memberikan manfaat yang besar di dalam pengoperasian boiler, fireheater dan tungku api yang menggunakan bahan bakar gas, minyak maupun batubara.

Walaupun burner hanyalah sebuah unit pendukung didalam pengoperasian sebuah pabrik,  tetapi permasalahan yang dapat ditimbulkannya akan berdampak sangat besar pada industri tersebut dan kerugian yang timbulpun akan cukup besar.

Pemakaian bahan bakar dapat diminimalisasi apabila operasi burner ada dalam kondisi optimal.  Permasalahan mengenai operasi burner  yang timbul di lapangan akan segera dapat diatasi dengan baik, apabila para insinyur atau supervisi senior di pabrik mengerti dengan betul, tentang pembakaran dan perilaku burner, baik dari sisis fundamental maupun teknikal.

Perawatan burner akan lebih efektif dan ekonomis, apabila prinsip-prinsip burner dipahami dengan baik, dengan pengetahuan ini modifikasi burner juga dapat dilakukan sendiri.

Maka dari itu, pelatihan ini akan sangat banyak  membantu dalam hal “transfer know how”, sehingga industri yang bersangkutan akan mempunyai tenega-tenaga insinyur maupun supervisi senior yang andal.

Pada akhirnya pabrik itu sendiri akan memperoleh keuntungan langsung, seperti dalam hal mampu meminimalkan pemakaian bahan bakar, menghemat biaya bahan bakar  dan lain sebagainya.

TUJUAN TRAINING :
Memberikan pengetahuan dasar dan teknikal mengenai burner dan pembakaran bagi para operator maupun supervisi, yang bertugas di pabrik.

CAKUPAN MATERI TRAINING :

  1. Teknologi Burner : definisi, fungsi, konsideran operasi dan perancanagan.
  2. Parameter-parameter operasi burner : Air-fuel Ratio, Turn down Ratio, Efisiensi, Excess air, draft, flame speed, flash back, flouriditis limits.
  3. Karakteristik Flame : louminous, non lominous, laminar, flame pendek, flame panjang.
  4. Variasi Burner Komersial dan Janji-janji Kerja.
  5. Klasifikasi Burner : bumer bahan bakar minyak dan gas.
  6. Operasi Burner Minyak Baker : teknik pengkabutan, parameter pengkabutan, ukuran butiran kabut.
  7. Bahan Bakar Minyak dan Gas
  8. Rekayasa Pembakaran dalam Industri Proses : energy industry, neraca masa pembakaran, udara ekses optimum, neraca energy, ketergantungan efisiensi proses, teknilogi dan operasi pembakaran, pengendalian sistem dan operasi pembakaran.
  9. Perawatan Sistem Pembakaran : komponen-komponen yang memerlukan perawatan, permasalahan penyalaan, permasalahan alat kendali, fuel-air ratio, permasalahan ukuran udara pembakaran, permasalahan peralatan flame safety.
  10. Alat Kelengkapan Burner.
  11. Troubleshooting Burner dan Sistem Pembakaran.
  12. Mekanisme Pembakaran : mekanisme pembakaran bahan baker.
  13. Simulasi CFD untuk perkiraan kinerja burner
  14. Optimisasi Operasi Burner dan Sistem Bakaran : kondisi optimum operasi, variasi laju alir bahan bakar dan udara, minimasi nox dari burner, minimasi jelaga (soat)
  15. Ukuran Noi
  16. Kebisingan (noise) oleh Burner : permasalahan bising, parameter-parameter operasi yang menimbulkan bising, penaggulangan bising pada burner, parameter kritis terjadi noise pada burner.
  17. Flame Stabilizer.
  18. Fluidized Bed Combustor.
  19. Sistem Pembakaran Spesifik
  20. Ketergantungan Bahan Bakar pada Burner

SIAPA SEBAIKNYA MENGHADIRI TRAINING INI?
Peserta training adalah operator, maupun supervisi dan teknisi senior yang bertugas pada bagian operasi, perawatan, inspeksi, technical support, pada pabrik, kilang dan industri untuk reformer, boiler, fireheater, reheating furnace, glass furnace, incenerator, klin cement dan tungku-tungku api pada berbagai pabrik, kilang dan industri.

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Pembicara
Yazid Bindar, Dr. Ir. M.Sc.
Dr. Ir. Yazid Bindar, M.Sc. menekuni bidang burner, pembakaran, Computational Fluid Dynamics (CFD) dan perpindahan panas. Program Sarjana diselesaikan di Departemen Teknik Kimia, Institut Teknilogi Bandung (ITB) pada tahun 1985, sedangkan Program Master dan Doktor diselesaikan di Queen’s University, Kingston, Ontario, Kanada yaitu pada bidang Combustion dan Computational Fluid Dynamics (CFD). Selama mengikuti Program Doktoral tersebut, beliau berkesempatan untuk magang di pabrik baja Steelco, Kanada. Sekarang beliau adalah dosen pada Departemen Teknik Kimia Institut Teknologi Bandung (ITB). Dr. Ir. Yazid Bindar, M.Sc. sudah sering memberikan training kepada peserta industri di Indonesia untuk topik-topik yang berhubungan dengan Combustion dan Computational Fluid Dynamics (CFD).

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Flowmetering and Custody Transfer (BANDUNG)

Jadwal Training

Flowmetering and Custody Transfer (BANDUNG) TRAINING TIME : 09 May 2022-12 May 2022 20 Jun 2022-23 Jun 2022 25 Jul 2022-28 Jul 2022 29 Aug ... Baca Selengkapnya

Flowmetering and Custody Transfer (BANDUNG)

Jadwal Training

Flowmetering and Custody Transfer (BANDUNG)

TRAINING TIME :

  • 09 May 2022-12 May 2022
  • 20 Jun 2022-23 Jun 2022
  • 25 Jul 2022-28 Jul 2022
  • 29 Aug 2022-01 Sep 2022
  • 26 Sep 2022-29 Sep 2022
  • 24 Oct 2022-27 Oct 2022
  • 21 Nov 2022-24 Nov 2022
  • 05 Dec 2022-08 Dec 2022

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

TRAINING INTRODUCTION :
This course deals with the entire range of flow related instruments (especially in legal metrology) and renders a systematic approach in measurement, calibration, typical errors in measurement and their estimation. Flow metering technologies for custody transfer purposes that cover obstruction method (orifice, coriolis, positive displacement meter, venturi, vortex, v-cone, turbine, etc) and non-obstructions method includes ultrasonic and magnetic flowmeter will be discovered. Additionally, the course explains the calibration methods, uncertainty analysis, and certification of the related instruments for custody transfer application. This course covers topics including the flow metering and its conformity with API or AGA practical guides, ISO standard, ASME and OIML recommendations.

TRAINING OBJECTIVE :
After completing this course, participants will be able to:

  1. Understand the principles of flow measuring techniques
  2. Analyze the uncertainty and the MPE requirements for custody transfer
  3. Apply principles and methods for flow measurements to improve fair custody transfer
  4. Understand the metrological and technical requirements for flow measuring technologies for fiscal application (type and pattern approvals)
  5. Specify appropriate flow meter technology
  6. Evaluate conformity assessment for the selected custody transfer meter
  7. Improve the practical skill in calibration and uncertainty calculation

TRAINING MATERIAL OUTLINE :

  1. Flow Measurement and its Conformity with ISO/IEC 17025:2005
  2. API, AGA, ASME-MFC, ISO and OIML
  3. Type and Pattern Approval of the Flow Measuring Instruments
  4. Overview of Various Flow Measurement Technologies
  5. Calibration and In-Situ Test
  6. Calibration and Uncertainty Analysis of Differential Pressure Flow Meter
  7. Calibration and Uncertainty Analysis of Turbine Flow Meter
  8. Calibration and Uncertainty Analysis of Ultrasonic Flow Meter
  9. Calibration and Uncertainty Analysis of Mass Flow Meter (Coriolis Flow Meter)
  10. Calibration and Uncertainty Analysis of Vortex Flow Meter

TRAINING METHODES :  
1.    Tutorial/Class
2.    Software Simulation and Demo
3.    Workshop/Practices
4.    Interactive Discussions

CLASS/EXERCISES:

  1. Software for uncertainty calculation and analysis
  2. Flow measurement software for simulating the dynamics characteristics of flow meters
  3. AGA 3 calculation

INSTRUCTOR :   Dr. Ade Haryanto, Ph.D. and Team

INVESTATION PRICE/ PERSON :     

  • Rp. 8.500.000/peserta (bayar penuh) atau
  • Rp. 8.250.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  • Rp. 7.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
Dr. Ade Haryanto, Ph.D. received the B.S. in Engineering Physics and M.S. degree in Instrumentation and Control from Bandung Institute of Technology (ITB) in 2003 and 2006, respectively, and Doctor Degree (Dr.) and Doctor of Philosophy (Ph.D) in Intelligent Control and Automation in 2010 and 2013, respectively, from School of Mechanical Engineering, Pusan National University, Busan, South Korea. His research focus is including modeling, identification, dynamics system, instrumentation and control of the power plant and its implementation using distributed control system. As a professional instructor, he has trained various topics in the scope of process control, automation, and metering systems, which were aimed to participants coming from industrial practitioners such as PT. Pupuk Kaltim, PT. Badak NGL, PT. Pertamina, PT. Indonesia Power, PT PLN, PT. Pupuk Iskandar Muda, etc. In the project implementation areas, the instructor also experience in project documentation, control system migration and power plant design.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Gas Dispersion Analysis (BANDUNG)

Jadwal Training

Gas Dispersion Analysis (BANDUNG) Tanggal 09 May 2022-11 May 2022 27 Jun 2022-29 Jun 2022 11 Jul 2022-13 Jul 2022 08 Aug 2022-10 Aug 2022 ... Baca Selengkapnya

Gas Dispersion Analysis (BANDUNG)

Jadwal Training

Gas Dispersion Analysis (BANDUNG)

Tanggal

  • 09 May 2022-11 May 2022
  • 27 Jun 2022-29 Jun 2022
  • 11 Jul 2022-13 Jul 2022
  • 08 Aug 2022-10 Aug 2022
  • 12 Sep 2022-14 Sep 2022
  • 10 Oct 2022-12 Oct 2022
  • 28 Nov 2022-30 Nov 2022
  • 05 Dec 2022-07 Dec 2022

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   3 days

TRAINING INTRODUCTION :
Oil and gas plants inherently emphasize the importance of planning for emergency and designing plant to minimize the occurrence of toxic release, or uncontrolled flammable gas into the surrounding and the environments. Hence, it is of critically important to understand the dispersion characteristics and to reduce the impact that may generate during plant operation. Accidents results from loss of containment of the gas from the process through various mechanism including leak, rupture, runway reactions, etc. The rate of discharge, quantity released, and dangerous concentrations levels are among important factors to determine. Therefore, to be able to model gas dispersion as a function of time and space, engineers must be able to : i) Identify  the release points, ii) develop a source model to describe how materials are released and the rate of  release, and iii) estimate the downwind concentration of toxic or flammable material using dispersions model. In this training, relevant DOW’s Chemical Exposure Index, ERPGs, OSHA (CFR 1910,119), NFPA, and NRC references will be consulted.

TRAINING MATERIAL OUTLINE :

  • Introduction of Source Model
  • Flow of Vapor and Gas through Holes and Pipes
  • Adiabatic Flows and Isothermal Flows
  • Parameters Affecting Gas Dispersions
  • Neutrality Buoyant Dispersions Model (Plume and Puff Models with respect to various wind, and release point location scenarios)
  • Dense Gas Dispersion
  • Toxic Effect Criteria
  • Effect of Release Momentum and Buoyancy
  • Gas Release Mitigation

TRAINING BENEFIT :
In addition to QRA result, the operator will know the areas downwind posses the high probability of the gas dispersion, the quantity and the impact generates. Hence, the measures and precaution can properly be anticipated. This highly quantitative analysis will be useful for both during design stage as and operation stage of the plant.

WHO SHOULD ATTEND THIS TRAINING?
Plant and Pipeline Operators, Supervisors, Engineers and Manager.

INVESTATION PRICE/ PERSON :

  1. Rp 6.950.000/person (full fare)  or
  2. Rp 6.750.000/person (early bird, payment 1 week before training) or
  3. Rp 6.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Dr. Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and  Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager, at PT. MMS, PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity  research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Sistem Kontrol RHVAC (Refrigeration Heating Ventilating And Air Conditioning)

Jadwal Training

Sistem Kontrol RHVAC (Refrigeration Heating Ventilating And Air Conditioning) Peningkatan kemampuan dan keterampilan karyawan pada perusahaan adalah sangat perlu untuk meningkatkan efisiensi dan efektivitas kerja ... Baca Selengkapnya

Sistem Kontrol RHVAC (Refrigeration Heating Ventilating And Air Conditioning)

Jadwal Training

Sistem Kontrol RHVAC (Refrigeration Heating Ventilating And Air Conditioning)

Peningkatan kemampuan dan keterampilan karyawan pada perusahaan adalah sangat perlu untuk meningkatkan efisiensi dan efektivitas kerja karyawan, yang secara tidak langsung dapat meningkatkan profit perusahaan.

Peningkatan keterampilan untuk teknisi perawatan akan meningkatkan kemampuan penanganan peralatan agar bekerja dengan optimal dan aman.

Pada proposal ini akan disampaikan materi-materi pelatihan yang ditujukan bagi karyawan perusahaan bagian maintenance peralatan, khususnya bidang teknik pendingin dan tata udara untuk bidang kontrol (pengendalian)

TUJUAN TRAINING :
Diharapkan pada akhir pelatihan setiap peserta dapat :

  • memahami kontrol sistem pendingin dan tata udara.
  • Menerapkan pengetahuan bidang kontrol sistem pendingin dan tata udara dalam kegiatan sehari hari di tempat kerja

CAKUPAN MATERI TRAINING :

  1. Alat kontrol dan kelistrikan pada sistem RHVAC.
    1. Sistem kelistrikan 1 & 3 Phase
    2. Sistem motor (prime mover)
    3. Alat kontrol kelistrikan RHVAC
    4. Alat kontrol listrik pada sistem refrigerasi dan Tata Udara, HLP, Thermostat, Overload, Oil Pressure dll.
    5. PLC (Programmable Logic Controller) dengan materi discrete I/O, motor control, permissive and interlock circuits, dll
  1. Praktek alat kontrol dan kelistrikan pada sistem RHVAC

SIAPA YANG HARUS MENGIKUTI TRAINING INI ? :
Untuk mendapatkan hasil pelatihan yang lebih optimal, peserta sebaiknya dengan minimal setara lulusan SLA/ STM atau D3.

INSTRUCTOR :   Ade S. Margana, M.Eng and Ir. Maridjo,MT.

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Amaroossa, Serela, Gino Feruci), Grand Setiabudi, De Java

TRAINING DURATION :   5 hari

WAKTU TRAINING :

16 Jan 2023-20 Jan 2023
13 Feb 2023-17 Feb 2023
06 Mar 2023-10 Mar 2023
03 Apr 2023-07 Apr 2023
08 May 2023-12 May 2023
19 Jun 2023-23 Jun 2023
17 Jul 2023-21 Jul 2023
07 Aug 2023-11 Aug 2023
18 Sep 2023-22 Sep 2023
16 Oct 2023-20 Oct 2023
06 Nov 2023-10 Nov 2023
18 Dec 2023-22 Dec 2023

HARGA INVESTASI/PESERTA :

  • Rp. 9.750.000/peserta (bayarpenuh) atau
  • Rp. 9.500.000/peserta (early bird, yang membayar 1 minggusebelum training) atau
  • Rp. 9.250.000/peserta (pesertabergroup yang terdiridari 3 pesertaataulebihdari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ade Suryatman Margana, ST.,M.Eng. adalah dosen tetap pada Politeknik Bandung (Polban) dan Kepala Jurusan Teknik Refrigerasi dan Tata Udara. Beliau juga memberikan pelatihan/ training kepada perusahaan-perusahaan besar di Indonesia untuk topik-topik :

  • Maintenance Management
  • Inventory Control
  • Reliability Centered Maintenance
  • Retrofit Hydrocarbon
  • Health Safety and Environment
  • Mechanical and Electrical
  • Refrigeration and Air Conditioning, et

Lebih spesifik beliau ahli dalam bidang RHVAC, Mechanical & Electrical and Maintenance Management, dan memegang sertifikat kompetensi :

  1. Ahli K3 Madya (Senior Occupational Health and Safety Professional), BNSP
  2. Ahli Maintenance RHVAC System, ECOZONE, Nederland, Belanda

Beberapa company yang pernah menggunakan jasa beliau diantaranya : PT. Pertamina (Persero), Krakatau Steel, Pupuk Sriwijaya, Red Cross International, Sapta Indra Sejati, CococoPhillips, Freeport, dll.

Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balongan pertamina, PT. Indocement, some PLTA, some hotels, PT.Pupuk Kujang, PT.Bio Farma, BPPT, PT. Bintang Agung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Material Certification Requirement For Oil And Gas Industry (BANDUNG)

Jadwal Training

Material Certification Requirement For Oil And Gas Industry (BANDUNG) Tanggal 09 Jan 2023-11 Jan 2023 06 Feb 2023-08 Feb 2023 06 Mar 2023-08 Mar 2023 ... Baca Selengkapnya

Material Certification Requirement For Oil And Gas Industry (BANDUNG)

Jadwal Training

Material Certification Requirement For Oil And Gas Industry (BANDUNG)

Tanggal

09 Jan 2023-11 Jan 2023
06 Feb 2023-08 Feb 2023
06 Mar 2023-08 Mar 2023
12 Apr 2023-14 Apr 2023
08 May 2023-10 May 2023
12 Jun 2023-14 Jun 2023
10 Jul 2023-12 Jul 2023
07 Aug 2023-09 Aug 2023
11 Sep 2023-13 Sep 2023
09 Oct 2023-11 Oct 2023
06 Nov 2023-08 Nov 2023
11 Dec 2023-13 Dec 2023

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING OBJECTIVE :
This course covers the science and engineering of component materials used for oil and gas industry , the factors and mechanisms influencing their properties and their useful life as well as the methods to assure their quality during manufacturing and operation. Standard specification and clasification of materials for high reliability under normal and abnormal conditions., Materials certification requirement to ensure better performance in oil and gas environment as well as destructive  testing, plant monitoring techniques, procedures for structural integrity assessment of piping, vessel, and colom Participants should achieve a good understanding of materials behaviour in oil and gas environment and the use of those materials in the field.

WHO SHOULD ATTEND THIS TRAINING ? :
Those who work in the logistics / materials department i.e. maintenance, purchasing warehousing, inventory control specially those who actually handle the materials receiving and storage.

TRAINING MATERIAL OUTLINE :

  1. Aspec material designs for reason application in oil and gas industries
  2. Materials classification, standard and specification
  3. Physical, mechanical, chemical and   thermal properties of  ferro and no ferro materials
  4. Functional requirements for materials used for piping, vessel and  other  components.
  5. Impact of degradation on oil and gas  material‘s behaviour
  6. Materials certification requirement for application in oil and gas industries
  7. Composition analysis as a quality control to improve materials performance
  8. Factors limiting the lifetime of oil and gas components
  9. Plant diagnostic and monitoring techniques to improve realibility
  10. Structural  and component Integrity Assessment to improve safety
  11. Examples of failures induced by corrosion

TRAINING DURATION :  3 days

INVESTMENT PRICE/PERSON :

  1. Rp. 6.750.000/peserta (bayar penuh) atau
  2. Rp. 6.500.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. Rp. 6.250.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Backpack
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

TRAINING INSTRUCTOR
Ir. Djoko Hadi Prajitno, MSME. was graduated from Mining Metallurgy Bandung Institute of Technology (ITB) and Material Engineering UNSW Australia. He is as expert in Metallurgy/materials engineer at Metallurgy Laboratory Pusat Teknologi Nuklir Bahan dan Radiometri (PTNBR) Badan tenaga nuklir nasional (BATAN) Bandung. He is also lecturer at University of Jenderal Achmad Yani Bandung and lecturer at ITENAS (Institut teknologi nasional) Bandung. In campus he teachs material engineering, corrosion, advanced material, coating and metallurgy. He has researched some topics related to his expertise such as

  1. Research and development metal alloy with zirconium matrix
  2. Research and development coating of metal alloy inconel with aluminate in collaboration with mining engineering ITB
  3. Production and development of compound alloy between nikel-aluminida metals in collaboration with mechanical engineering ITB
  4. Coating of nikel aluminida at inconel alloy with spray Coating in collaboation with mechanical engineering ITB
  5. Research on Coating
  6. Research for production of material for stater drive Hercules airoplane in collaboration with DISLITBANG TNI AU
  7. Welding research of dissimilar metal
  8. And others

He frequently teachs training class for participants from many Indonesian companies. he has experience and knowledge about materials and skill that can be beneficial for warehouse people. He is member or has experience at some organizations such as HFI, Indonesian Corrosion Association, LSP AKN, Indosian Petroleum Association, National America Corrosion Engineer . Related to his expertise, he has much field experiences.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Pengujian Material Bersifat Merusak (Destructive Test)

Jadwal Training

Pengujian Material Bersifat Merusak (Destructive Test) Tanggal 09 Nop 2021-12 Nop 2021 07 Des 2021-10 Des 2021 Tempat Hotel Kagum Group Bandung (Golden Flower, Banana ... Baca Selengkapnya

Pengujian Material Bersifat Merusak (Destructive Test)

Jadwal Training

Pengujian Material Bersifat Merusak (Destructive Test)

Tanggal
09 Nop 2021-12 Nop 2021
07 Des 2021-10 Des 2021

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

PENDAHULUAN :
Pengujian sifat mekanik bahan merupakan disiplin ilmu yang fokus utamanya adalah mengetahui kemampuan bahan terhadap gaya dari luar atau beban (the response of metals to forces or load), sehingga dapat diketahui nilai batas kemampuannya dan  aman digunakan. Untuk dapat memahami lebih lengkap tentang pengujian sifat mekanik bahan diperlukan pengetahuan seperti:  kekuatan bahan (strength of materials), teorema elastisitas dan plastisitas, mesin disain , matematika, fisika, dll.

Pemahaman kekuatan bahan misalnya diasumsikan bahwa kekuatan bahan terfokus pada teori kekuatan, elastisitas dan plastisitas yang pada hakekatnya  asumsi tersebut hanya untuk bahan atau material yang homogen saja (tanpa melibatkan pengaruh temperatur misalnya). Hubungan sifat mekanik dan struktur mikro merupakan hal yang sangat penting dipahami, mengingat setiap perubahan struktur mikro akan berakibat pada perubahan sifat mekanik bahan, misalnya pengaruh temperatur tinggi akan menyebabkan sifat logam menjadi lunak dan sebaliknya pada temperatur rendah sifat logam akan menjadi getas. Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Pengujian Material Bersifat Merusak (Destuctive Test).

PESERTA :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang pengujian material bersifat merusak pada industri rekayasa.

SASARAN TRAINING :  
Setelah mengikuti pelatihan ini peserta diharapkan memiliki pemahaman lebih tentang pengetahuan dan keahlian dalam pengujian karakteristik material bersifat merusak.
 
CAKUPAN MATERI TRAINING :
1.    Uji tarik (tensile test)
2.    Uji kekerasan makro dan mikro (hardness test)
3.    Uji torsi (torsion test)
4.    Uji lelah (fatique test)
5.    Uji lentur (bending test)
6.    Uji geser (shear test)
7.    Uji impak (impact test)
8.    Metalografi
9.    Uji komposisi kimiawi

INVESTATION PRICE/PERSON :

  • Rp. 8.500.000/person (full fare) or
  • Rp. 8.250.000/person (early bird, payment 1 week before training) or
  • Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

  • Training Module
  • Flash Disk contains training material
  • Certificate
  • Stationeries: NoteBook and Ballpoint
  • T-Shirt
  • Backpack
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Lunch and twice coffeebreak everyday of training
  • Qualified instructor
  • Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.:

Pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.

In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Flow Measurement And Control Element (BANDUNG)

Jadwal Training

Flow Measurement And Control Element (BANDUNG) TRAINING TIME : 09 Nop 2021-12 Nop 2021 07 Des 2021-10 Des 2021 VENUE :   Hotel Kagum Group Bandung ... Baca Selengkapnya

Flow Measurement And Control Element (BANDUNG)

Jadwal Training

Flow Measurement And Control Element (BANDUNG)

TRAINING TIME :
09 Nop 2021-12 Nop 2021
07 Des 2021-10 Des 2021

VENUE :   Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

TRAINING DURATION :   4 days

TUJUAN:
Membekali peserta tentang pengetahuan tentang dasar-dasar aliran, metoda pengukuran laju aliran, dan elemen kontrol pada pengukuran laju aliran.

SASARAN:
Setelah mengikuti pelatihan ini, peserta diharapkan mampu:

  • Memahami dan menjelaskan prinsip kerja pengukuran laju aliran, dan menyelesaikan masalah dasar pengukuran laju aliran
  • Menyebutkan komponen dan fungsinya
  • Membedakan beberapa metoda pengukuran laju aliran
  • Memilih pengukuran laju aliran yang tepat
  • Menghitung dan merencanakan meter laju aliran
  • Memasang meter aliran dengan tepat
  • Menyelesaikan masalah yang berkaitan dengan elemen kontrol dan kontrol pada pengukuran laju aliran

CAKUPAN MATERI TRAINING:

  • Dasar aliran
    Sifat-sifat fluida, jenis aliran, Reynold number, aliran laminar dan turbulen
  • Unit satuan dan istilah
  • Kekasaran pipa
  • Metoda atau pemilihan meter aliran
    Diagram pemilihan, kesalahan pada meter, pemilihan alat ukur aliran
  • Pengukuran aliran
    Differensial pressure, nosel, orifice, venture meter, rotameter, magnetic flow meter
  • Konstruksi dan instalasi meter aliran
    Orientasi pipa dana arah aliran, kebutuhan panjang pipa, keakuratan
  • Sinyal, transducer, dan transmitter
  • Pengkondisian sinyal
  • Proses kontrol.

PESERTA:
Para mechanical, rotating, construction, dan project engineers, operator, teknisi di bidang instalasi, pengujian dan perawatan mesin.

INSTRUCTOR :    Ir. Sugeng Isdwiyanudi, MT.   and Team

INVESTATION PRICE/PERSON : 
1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:
1.    Training Module
2.    Flash Disk contains training material
3.    Certificate
4.    Stationeries: NoteBook and Ballpoint
5.    T-Shirt
6.    Backpack
7.    Training Photo
8.    Training room with full AC facilities and multimedia
9.    Lunch and twice coffeebreak everyday of training
10.    Qualified instructor
11.    Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

TRAINING INSTRUCTOR
SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Oxy Acetylene Welding (Las Asetilin)

Jadwal Training

Oxy Acetylene Welding (Las Asetilin) Las oxy-Acetyline adalah proses pengelasan secara manual, dimana permukaan yang akan disambung mengalami pemanasan sampai cair oleh nyala (flame) gas ... Baca Selengkapnya

Oxy Acetylene Welding (Las Asetilin)

Jadwal Training

Oxy Acetylene Welding (Las Asetilin)

Las oxy-Acetyline adalah proses pengelasan secara manual, dimana permukaan yang akan disambung mengalami pemanasan sampai cair oleh nyala (flame) gas acetylin (yaitu pembakaran C2H2 dengan O2), dengan atau tanpa logam pengisi, dimana proses penyambung tanpa penekanan. Disamping untuk keperluan pengelasan atau penyambungan dapat juga dipakai sebagai : preheating, braze welding, cutting dan hard facing. Penggunaannya yang produksi, pekerjaan lapangan (field work), dan reparasi (repain & maintenance). Umumnya sangat baik untuk pengelasan baja karbon pelat tipis dan pipa berdinding tipis.

TUJUAN :
Peserta diharapkan dapat mengetahui dan memahami :

  1. Kesehatan dan keselamatan kerja pada pengelasan
  2. Prinsip dasar OAW
  3. Aplikasi OAW
  4. Desain sambungan dan posisi pengelasan
  5. Teknik pengelasan (leftward and right ward)
  6. Material, pemilihan elektroda dan pemeriksaan hasil lasan

PESERTA :
Praktisi tingkat operator, tingkat penyelia atau perencana bidang pengelasan pada industry rekayasa.

CAKUPAN MATERI TRAINING:

TEORI :

  1. Kesehatan dan keselamatan kerja pada pengelasan
  2. Prinsip kerja las OAW
  3. Pembuatan oksigen dan acetilin
  4. Katup Oksigen dan Acetilin
  5. Safety regulation and accident prevention in gas welding and torch cutting
  6. Macam – macam nyala oksi acetilin
  7. Welding techniques (leftward and rightward)
  8. Jenis sambungan
  9. Cacat – cacat as
  10. Proses pemotongan (flame cutting)
  11. Posisi pengelasan sesuai standard (ISO dan ASME/AWS)
  12. Prosedur pengelasan
  13. Pemeriksaan dan pengujian hasil lasan

PRAKTEK :

  1. Fillet weld (sambungan T: 1F, 2F, 3F, 4F)
  2. Plate weld (sambungan pelat: 1G, 2G, 3G, 4G)
  3. Tube weld (sambungan pipa: 1G, 2G, 5G, 6G)

Sertifikat Kompetensi, sesuai dengan level (posisi pengelasan) yang mampu dicapai

INSTRUCTOR : Ir. Sutrimo, M.Eng and team

VENUE : Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION : 4 days for non certification / 5 days for certification program

TRAINING TIME : (tanggal dibawah ini adalah tanggal untuk training NON SERTIFIKASI, untuk Program Sertifikasi ditambah 1 hari lagi )

Tanggal
01 Nop 2021-04 Nop 2021
29 Nop 2021-02 Des 2021

INVESTMENT PRICE/PERSON :

NON CERTIFICATION :
Rp. 8.950.000/person (full fare) or
Rp. 8.750.000/person (early bird, payment 1 week before training) or
Rp. 8.500.000/person (if there are 3 persons or more from the same company)

CERTIFICATION (BNSP ATAU IWS) : 11.500.000/person

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreakeveryday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Centrifugal Pump : Selection, Operation and Maintenance (BANDUNG)

Jadwal Training

Centrifugal Pump : Selection, Operation and Maintenance (BANDUNG) Tanggal 23 Nop 2021-26 Nop 2021 20 Des 2021-23 Des 2021 Jam Pelaksanaan 08.30-17.00 WIB Tempat Hotel ... Baca Selengkapnya

Centrifugal Pump : Selection, Operation and Maintenance (BANDUNG)

Jadwal Training

Centrifugal Pump : Selection, Operation and Maintenance (BANDUNG)

Tanggal
23 Nop 2021-26 Nop 2021
20 Des 2021-23 Des 2021

Jam Pelaksanaan
08.30-17.00 WIB

Tempat
Hotel Kagum Group Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

Pembicara / Fasilitator
Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

INVESTATION PRICE/PERSON :
Rp. 8.500.000/person (full fare) or
Rp. 8.250.000/person (early bird, payment 1 week before training) or
Rp. 7.950.000/person (if there are 3 persons or more from the same company)

TRAINING MATERIAL OUTLINE :

  1. Pendahuluan
  2. Kurva Head kapasitas dan sistem pompa centrifugal
  3. Pengaturan kapasitas
  4. Prosedur menjalankan dan mematikan
  5. Water hammer dan surging
  6. Fluktuasi tekanan
  7. Operasi paralel dan operasi seri
  8. Operasi otomatis
  9. Pemeriksaan pendahuluan
  10. Pemeriksaan kondisi operasi
  11. Pengamanan untuk menghentikan pompa
  12. Penanganan pompa cadangan
  13. Penanganan pompa yang tak dipakai dalam jangka waktu lama
  14. Analisis, pencegahan dan perbaikan

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Bagikan:

KONTAK CEPAT

Tags

Avatar photo

 

Jika ada kebutuhan Inhouse training atau kelas khusus silahkan hubungi 0851-0197-2488 / 0899-8121-246 Petrus Soeganda. Untuk mengundang Petrus Soeganda sebagai Pembicara Internet Marketing

Chat dengan kami
CV INFO SEMINAR
0899-8121-246

 

2026

Info Seminar | Jadwal Seminar